Demo of Smartwave range of Boats manufactured by Advantage Plastics NZ
Пікірлер: 65
@ivanandmeli51164 жыл бұрын
I hope they have them here in the US, for what I need it's perfect
@arronjohnston7423 жыл бұрын
polycraft boats is in the USA if you still need something like this
@melrichardson2392 Жыл бұрын
Beautiful the perfect boat.
@joka73163 жыл бұрын
FYI there is a 4200 (14 Feet) center console with a 50 HP Merc 4 stroke is listed in Australia for around 22,000 ASU (17,000 USD) to give you an idea.
@DatNextGamer4 жыл бұрын
You know boston whaler has been doing this since the beginning of time
@jonahsroka23464 жыл бұрын
Yeah this is copied from Boston whaler,stupid
@mikestansberry43104 жыл бұрын
Boston whaler left the engine on when they cut in half in the 1950’s.
@BreezeLifeTV4 жыл бұрын
I would like to see this into a super kayak
@G56AG4 жыл бұрын
The construction method and I believe the materials are similar to kayaks, main difference is the kayaks aren't foam filled to keep the weight down. You can always fill a kayak with foam yourself, but you will probably regret it.
@user-hi9qn1lp5b5 ай бұрын
You did not cut it in half with a motor on it. Will it sink if you do?
@wolfhardpodewski39884 жыл бұрын
Der Eindruck ist wirklich sehr gut
@brian.79664 жыл бұрын
really ! they said that about the TITANIC,
@bigvee4014 жыл бұрын
this an't the titanic, you could blow this boat to pieces and the pieces will all float
@donjohnson32794 жыл бұрын
Are these available in the United States and if so where ?
@trevorroys31707 ай бұрын
Love mine!!!
@gerardhaubert82104 жыл бұрын
Is there an optional floor?
@cathieleo74832 жыл бұрын
why this boat dont shot its ads during stormy seas.what real boat is during that season.
@user-hi9qn1lp5b5 ай бұрын
Where is the motor during the test.
@gerardhaubert82104 жыл бұрын
How does this boat compare to Boston Whaler’s smaller boats?
@enginemaster014 жыл бұрын
Boston whalers are too expensive. But this is a better design hull
@magnasyst4 жыл бұрын
Good boat.👍
@thomastidewater6 жыл бұрын
How does the polyethylene hull hold up to the sun's U.V. rays?
@darren_buenoworks47045 жыл бұрын
any answers?
@VladDrakull15 жыл бұрын
I'm not a seller, I'm a owner of a plastic PTE (polyethylene) kayak and about to buy a PTE boat, the plastic is uv protected and stabilized, I own a kayak that is more than 4 years old and with a lot of use with no problem at all, not even colour fading, but you can increase the UV protection by aplying UV protection wax. Maintenence needed is just like any other boat, wash it after use and if you keep it outside cover it. Another advantage is that you can repair it yourself, if you scratch or cut the PTE, you can use a hotgun and PTE rods to weld or smooth it, there are youtube vídeos teaching how to do those repairs. No osmose, no floats to be repaired or replaced, no special and toxic resins to repair, yep it is that simple and easy to have one PTE boat or kayak. These boats are not a novelty they have been in production in the northern european countries for decades, check the norwegian company pionerboat.com, recently they became more attractive because of all the advantages over fiberglass and metal boats, and to the fact that they are 100% recyclable.
@reefishing.falsebay.tinyboat2 жыл бұрын
Hi are these boats only in nz?
@lachlanoneil89384 жыл бұрын
Benefit is that the "paint" lasts longer that's about it.
@Techstv35725 жыл бұрын
I mean, do you have markets here in philippines? If have, How much per unit?
@Freddieready5 жыл бұрын
Is this a availabe in the U.S.?
@whitelightfilm5 жыл бұрын
Check with you local dealer
@JohnHighmerSmith4 жыл бұрын
didn't get to see full drop!!!
@claudia1love4 жыл бұрын
Nice🌱
@MCchannel-bb9gr Жыл бұрын
How to order this kind of boat here in the Philippines pls reply
@rickb92384 жыл бұрын
Too bad this stuff wasn’t available in 1912.😳🙄😮
@user-hb8be5wb4q3 жыл бұрын
Give me a full top transom, and a long leg motor, that makes me a happy camper. Just when I get on the water, I like the water to be further from inside the boat, the better. Just my quirks, and I’ve had water trying to get in the boat, didn’t like it!
@corneferreira76912 жыл бұрын
They are very dry boats even in the rough.
@wallaceleykalang81243 жыл бұрын
Is this available in Malaysia..?
@_adamz3982 жыл бұрын
otw
@medxpress51724 жыл бұрын
How much??? For a 17footer. Can you ship to philippines?
@user-tu7ju1tn7r3 жыл бұрын
那里可以买到在法国
@azm-kh5yo3 жыл бұрын
Hai...l like to ask...if you hava a dealer somewhere around Malaysia
@norcaloutdoor54624 жыл бұрын
better than inflatable boat
@chikchengning15844 жыл бұрын
Can you name me the renowned local dealers of Smartwave boats in Bintulu,Sarawak,Malaysia.,please ! TQVM.
@thajuai82824 жыл бұрын
How much the boat Indian rupee Thajudeen from Kerala
@cahyoadi89344 жыл бұрын
How much is this...
@rodericmendoza27313 жыл бұрын
Are these available in the philippines
@_adamz3982 жыл бұрын
otw
@davidgray81913 жыл бұрын
dIDN'T bOSTON wHALER DO THAT 40 YEARS AGO?
@yoyopunk8987 Жыл бұрын
Berapa ringgit you nak jual?9
@chikchengning15844 жыл бұрын
What is the cost for one unit of smartwave boat in Malaysia ?
@whitelightfilm4 жыл бұрын
Enquire at your local dealer
@riderknight58055 жыл бұрын
What's the boat made of? Is it durable?
@jimquantic2 жыл бұрын
stated in this video, Polyethylene.
@randomshawny20454 жыл бұрын
I want one
@cameronbarry62226 жыл бұрын
Who use tin or glass on a boat?
@theswafford10215 жыл бұрын
fiber glass
@anthonymurphy16244 жыл бұрын
Aka aluminum boat
@kenrick664 жыл бұрын
If they are so confident why only 2 years
@wavepropulsion13 жыл бұрын
probably is not UV protected, HDPE UV protected is blacka as long as I understand
@Techstv35725 жыл бұрын
Availability in Philippines?
@whitelightfilm5 жыл бұрын
Juan Am I available in Phillipines ??
@gladheateher4now4 жыл бұрын
But wait,,,,theres more.lol
@migueljacob49133 жыл бұрын
Too expensive, buy 2 aluminum boats, one to use and the other to clean weakly..