''We're in 5 cylinder territory'' did I laugh!

This dozer is definitely going to be a 6 or more episode series. Nice to see a full crew getting involved in this episode. The banter about the screwups was very entertaining.

Clint I think you got your sense of humor from your Dad!

Someone was mad about something and the tractor got the worst end out of it 👍🏻🇺🇲

I reckon that engine, make a good boat anchor for most…with you guys..it will be the sweetest engine around 😂

Well, RIP that motor. Y'all can rebuild it though no sweat, but man I'd be draining every tank you can open by hand to check for gravel in the mean time.

Great to see your dad working in the shop, great sense of humor!

Guys it’s now official Clint and C&C Equipment Rocks 🪨 Rock On Clint and Kevin Great video as always Glad the crank and bearings weren’t totally destroyed Got lucky on that Can’t wait to see the dozer up and running

I particularly like the diagnosis stuff. Good job.

Nice to see your dad Clint ,, he taught you well.

Some times I hate what people do. I have been more fond of some of the equipment I ran then a lot of people, and that gravel reminded me why.

Really enjoyed seeing your dad and uncle Scott in the shop today. Great video.

❤❤waiting on a shop build, a collaboration of just the 3 teenagers @ C&C with guidance and oversight from the boss.

Hi Clint and Kevin, you were really lucky with that engine. I still hope everything goes well for you. You're going to have what you paid for that dozer. Let's not hope that less is better. Thanks for sharing my friends. Have a great evening, and God bless you all at C&C.

I enjoy the causal banter and obvious good relationships exhibited by all of you. It makes it a pleasant experience for use viewers. Having some experience with heavy construction in the 60’s and 70’s, it’s fun to watch the process you go through on each piece of equipment. The narrative is interesting and important to the viewer as we vicariously “fix” the problem. Keep up the great work.

Clinton Kevin Dad and Uncle Scott great video! Thanks for sharing! Kevin

Glad to see Kevin stepping up in the teardown; looks like he was a major asset.

Don't know who, but there are a lot of crazies out there. But, if the crazy who dumped two hands full of gravel in that engine hadn't done it, the little dozer might still be pushing dirt someplace else. Poor little orphan. At least she's home and getting a lot of love.

Amazing how little damage was actually caused. Nice to have a win. Thanks for sharing.

Thanks for sharing your thoughts, ideas and videos. The diagnosis videos are some of your best. Sad to see so new of a motor with so much damage but great to see it’s not going to the scrap heap. Good one to put the found foreign matter and ruined parts into a diorama for visiting guests to look at in a waiting room if you have such an area. Next impossible task is to determine what parts are missing and needed from the dozer. Your wealth of knowledge is impressive to see in action. Wishing you and your family the best.

I like the Milwaukee impact. We are steadily swapping our De-Walt for Milwaukee.

Torque Test channel actually did a test between the Snapon u have and the Milwaukee Mid Torque 3/8 smoked the Snapon for 250 bucks too, not 600!

a nice good evening from Germany ☕.

Hello Clinton, thanks for an interesting and distressing video today. I don't understand how anyone could pour gravel into an engine and think they have the right to do that. It was nice to see Mr. Chitwood hanging around with the boys. Cheers from Canada

I guess that could have been worse. Have you looked in fuel and hydraulic tanks yet? I worked for a dirt contractor and they sugared our equipment on a job site. They ended up building a corral with construction fencing and hired an armed guard to keep people away from the equipment at night. Since they kept coming back.

You've got to luv the "Rock" injection!!!

OK, so gravel in the engine: that I would never have guessed! Isn't it amazing how so many people think the engine was swapped before sale. There is no way they would have gone to that bother, oh hang on, I used to work for a dealer who "rebuilt" tractors and sent then painted to look super. I was a trainee mech and was told to rebuild engines with whatever parts we could find in the scrap boxes, seconds piles, or under/over sized cams we had. When I asked where I could get some new pistons etc, was told not to worry as engines never got checked as they were usually disappeared "in transit" and never got to where they were meant. Needless to say, I left soon after.

Nice “ The Gravel Crusher”

Clint Jr knows his stuff...in every direction...

Those batteries sure make the teardowns easier

Oh yes I love the rock stone engine, it’s a great rock star,on this cha now, lol good job rock stone fans, thanks BigAl California.

Shame that the motor had someone help it into destruction mode. Excellent equipment repair content! Thanks!

It’s a sad day when people have to sabotage equipment, there is no real reason for it. I have been involved in repairing 2 sabotage pieces of equipment, not fun and expensive. One thing is for sure, the right guys are working on the engine, it will run like a Swiss watch when you’re done, of that I have no doubt. Thanks for the update, enjoyed watching.

It's a great thing that you pick those up for scrap/parts prices😂 A person can afford to put a $1000 and a couple hours into them when they are that nice😊😊😊

I like seeing your Dad in the shop. I like hearing him when he laughs. he reminds me of my Dad.

Great to see Clint’s Dad getting in on the action .

I never understood why people destroy stuff just to destroy it. That 5 cylinder comment was pretty good.

Lol ! Looks like a rock & roll fryday ha? You all have a great weekend gents

The things people do to engines. Way to make it right!!!!!

Sell a locking system modification to your customers...especially those that are buying equipment from you. I bet Chris would buy one as his equipment is always on different job sites.

I'd say they pulled out the low hour engine to replace a blown engine. Then put the blown engine in the dozer loosely to get rid of it.

The most diabolical vandalism I ever saw was a full ether can placed inside the air inlet tube of the turbocharger on a 4WD tractor. The air going by the ether can held the can against the compressor wheel of the turbocharger, which after some time wore through the bottom of the ether can, injecting all the contents into the engine at full throttle. I was able to get the tractor to run long enough to load onto a RGN trailer, but it blew engine oil ALL OVER from the exhaust stack. I think the whole engine was replaced, since no one knew the true extent of the damage. The tractor was 6 months old.

Clinton another great video. Nice to have your father there!

During the non violent Caesar Chavez farm strikes I spent many hours on guard duty listening to dr dimento among other late night radio like only the shadow knows to keep strikers from sabotaging equipment !

Not the first time I have seen this had this happen to a 3508 only the damage occurred was much worse great video thanks Clint and Kevin and Tucker and Scott

C&C's gravel busters, tearing it down. Got rocks ? Come on in....

Gave Scott the camera and it was like Santa gave him a new harbor freight tool look how confused 🤔🤔 he got when you handed and let him the fancy ratchet and socket 😂😂😂

Can't believe the filter stopped. all the dirt from destroying everything. I'd say you hit a home run on this machine because it could been a total lost engine.

I think someone over quoted the bloke who owned that bulldozer and he never did a proper job or someone knew him and did not like him. That’s amazing. Rocks in the pan.

Love the video on this JD Dozer . Clint, Dad and Keven .

Love to watch people that know what they are doing ! Nice job

Maybe someone loved the dozer so much they didn't want anyone else to have it.😊

Hope you have checked the fuel tank, hydraulic tank, radiator, and any other area you can think of

EDISON CONGRATS!.... GOOD JOB BOYZ!

We had an employee do this to a cat motor, we hit him in the butt with his check and sent him away, about the same damage as this motor, good job men!

It's gonna be interesting watching you put that back together and set the timings.

Glad the motor turned out better than expected 👍😎🇺🇸 NY

Great video.

One bolt rock crusher dozer lol! ALWAYS lock engine compartment every time takes 2 seconds yes sir!

So interesting Thanks

THANKS!

As always, freaking awesome!!

Love the channel man. You have great content. I feel like the mechanic did a LOT of work here trying to figure out the timing issue from seeing that pump gear and the key. They probably didn't want to pay him and he made sure no one else could get it running too!

Having a late night here in the uk watching this instalment, great watching but as the guys have said more episodes for this rebuild, I'm away next thursday so can you put another episode or two up before that please. 🙂👍 thanks guys.

Great video more fun to come

If it was kids it can be a mechanic's nightmare great video thanks

Hey Clinton what a terrible waste these Greenies are a big problem here ,general vandalism a lot of small operators take their machine home every night to risky leaving it on site,big operators hire security guards with Dogs to watch their machinery at night,even brikkies take their mixer and barrow home every night sadly Australia isnt what it used to be . But on a brighter note really enjoyed this pull down edition your Dads a funny guy like father like son Have a good weekend Mate Kym Adelaide

Really enjoy watching your content

Might oughta check the hydraulic oil. Could be someone dumped a quarry in there too.

Clinton your a true pleasure to watch

Hey Clint, Have not commented in some time but have been watching all your videos. I was hoping to visit all of your folks this spring, but life happens I get better then the wife gets sick. Anyway I enjoyed the videos I have heard of people sabotaging engines. I don’t why people get off on it. I look forward to the rebuild. It was great to see your Dad.in the shop and helping out. Give him our Regards.

Another interesting video!

Alright, an engine rebuild video coming my way. Thanks.

Good Luck!

He's always doing a good job

Very interesting

Interesting tear down

Nice Vid!

Good job guys

I think I always learn something new! Thanks for the great content.

That will be a nice little dozer when you guys get her rebuilt. Great video. Thanks for sharing and have a great Memorial Day weekend C&C Equipment!!

Good video guys 👍🏻

Good Job Y'all !!!😃😁😂...Lookin' forward to the rebuild .

👌👍 Thanks for sharing

Love the videos thank you

I think uncle Randy works the hardest next to Mrs c!

Would have never thought rocks was in it somebody had a personal problem with this machine for sure but it’s looking like it can be saved 👍😎🇺🇸 NY

Love it Clint, sit glued to every bit of this so interesting How You diagnose what could have happened, great to watch keep up this type of content 😉

Wow pistons

Great content in this video. At one point I was wondering it the previous users were Fred Flintsone and Barney Rubble. Looking forward to the rebuild.

Wow. Just wow

Another fantastic episode, can't wait to see where this adventure takes us. Thanks for sharing!!!

Good video to watch and learning experience about that 5 Cylinder !!

Oh Boy! It's better than what I thought it would be,

I knew a guy who had 453-T DD in a 450 Jack. Some tree hugger put course grade valve grinding compound into the back side of the air filter. He had to start her every time with head gasket removal fluid but she still ran for years.

So one needs to be caught. Thank you.

Nice work.

Rocking good time at C&C.

Thank you for sharing, another great video, i learn a lot, your explanation are awesome 👍👍👍👍

Currently my favorite channel. Incredible knowledge along with a perfect level of fun!