I have the mt125, there is no fuel map programming. These are mechanically injected diesel engines. That aside the only time I have been able to put a serious load on the engine is with PTO driven implements and when lifting with the loader while driving hard into a pile of clay dirt. I would say that if you won't be mowing overgrown grass with a 60" mower deck or running a wood chipper or PTO generator you won't notice the lower power output of the mt122. The only problems I've had relate to poor dealer installation of accessories. Mower lift arms Installed on the wrong sides blocking the reverse pedal with the deck up. Loose, missing, and crossthreaded bolts on the spin around seat bracket and on the mower brackets. The loader control lever likes to come loose, I will have to locktite it but haven't so far because u don't think you can un screw it with the bodywork in place. I use mine for snow removal and have had no issues starting it in below 0 temperatures without any heaters. I use 10 seconds of glow plug activation in cold weather and changed to 5w40 synthetic diesel engine oil for faster lubrication in Wisconsin winters. It will sound like the engine is full of loose rocks until it warms up but so does my diesel truck.

Good info. Thanks!

I’ve got just over 20 hours on mine. Redid my culvert, buried a new fiber optic line from pole to house. Moved and stacked a bunch of pallets. Spread 18 yds of 2 minus. My only complaint is the loader isn’t as powerful as I could use but it got the job done.

Just installed a mechanical thumb from 7Blacksmiths and like it very much. I used the bottom plates from an axle attachment u-bolt kit, (3 to be exact,) on my LS-MT 125 series. 👋👋👋Like your channel. Cudos.

I have the LS MT125 love mine

Great info

Just hit 3.5 hrs on my mt122 and had two issues so far. Safety switch under the seat got pinched when spinning the seat for the hoe and popped a fuse and second issue I had was the hydro fitting behind the right rear tire was loose and leaking got 3 full turns out of it had to remove the tire to get to it.

Hallville, Ontario, Canada - I just bought one from Brett and can’t wait for it to get delivered. As for the poor starting mine is coming with a block heater.

I have the mt122. I like it mostly and have scraper box on it no back hoe so on my hilly 3 1/2 acres it is tippy. I enjoy your videos and I am about to change my oil after watching that video so very much appreciate your channel. Did you say wheel spacers? Where would I get those and how does it work? Obviously I am not mechanically inclined like you but I am teachable. Appreciate any advice.

I've been looking at this exact setup the past week. Looks like a great machine and it is so much cheaper than the John Deere.

Thank you

The Ls company builds them for newholland and bobcat, I believe they build them for other as well. Need parts just go to new Holland and get parts for the workmaster 25s

Videos from owners are the best love how you cut through all the BS. Shopping for my first tractor so I need all the help I can get. Already talked to John Deere, big negative! I'm going to get an LS quote tomorrow. Did you get it with the bucket hooks and loop or did you add them after? What pallet forks did you get and were they from the dealer or aftermarket? Thanks again for a very helpful video.

Thanks, man. I need a small powerful tractor like this but I've been wrestling between buying a used John Deere, love the 2025R but it's just too expensive, 10 year old ones still want near new prices. This looks like my price range and new is new. How easy does the loader and backhoe come off?

Thanks for the video. I’m moving out of the city to about 5 acres and I need to clear brush and small trees to clear some of the land. Then I need to bring in some fill to make some usable space out of some marsh/wet land as we had a river at the back of the lot. Do you think this thing could take out bushes and shrubs and stuff?

I have the new holland work master 25s, did tons of research on Kubota and John deer and mahindra, wish I would have checked into the LS probably would have saved more $$. Really like my new holland so far, wish I had a a backhoe!

I was wondering how long ago you got this? The only dealer in NH I found is Kingston so I’m assuming you got it there. They seem pretty good there. I’ve been considering getting an LS but still deciding. Would like to see some more videos of this tractor in the future if you get a chance.

I'm going to look at a 122 pretty soon. I want the mower to replace my riding mower. How do you think it would deal with the 60" mower? I've heard it is a bit under powered for it. Even larger riding mowers have 24-26hp engines.

Totally new to tractors but I can pretty much drive anything with wheels. Purchased a a 13 acre property only need to regularly maintain about 3-4 of it. So I looking a compact tractors that won't break the bank. Any recommendations as I start my research?

If a company can't tighten bolts then what else are they overlooking?

I have a MT 125 and I love it. I have the same complaints about the fix and finish that you do. Do you preheat the engine in the cold weather. I have no problem starting mine.

From what I have seen, all the little tractors are tippy. Some of your other problems ( loose nuts & so on) are a dealer problem not necessarily typical of the brand. Probably are assembled by high school kids working part time at the dealer.

Its a nice tractor.

I'm in central NH I've emailed the Kingston dealer with no answers. Where did you get yours.

how much pushing or pulling power does yours have...I just bought a brand new mt125 and in high range it doesn't have enough power to spin the tires in 2wd when I put the loader against something..or pull its self up a very steep hill...as of right now I'm not very happy with mine..my old kubota had way more drive power..it was only 21hp and Hydrostatic drive also..

So how was the fit and finish.

What year is yours

Fit and finish fit and finish

Do you run any implements

How can I ask you a question on a private chat

is the back hoe as smooth as a 1025r john deere

Just so you and everyone else who sees this vid, the question is why did "Tony's Tractor Adventure" get rid of all the LS tractors he had. He did not say why on any vid I've seen....

Let's just say the word finish again for shits an grins

new 2023 tractor and loader mt122 $14,000 mt125 $14,900

Fun fact a new Holland is a LS, you pay for the different badges