Why I use YelloTools: The Timbermaxx
Рет қаралды 14,666
6 жыл бұрынNothing beats the confidence you will have on any job with a YelloTool in your hand.
@infographie 5 ай бұрын
Excellent.
@tulw2728 2 ай бұрын
What type of board is? Could you please share the link to get it. I am starting to like all this and I’d like to be as good as you. Thank you. I am a new subscriber.
@thomasbaytarian3342 5 жыл бұрын
Exactly how I do it. Nothing Better!
@hubacekivan 2 жыл бұрын
He steps on the board and scratches the print. If he did it with a photo roller, everything would be easier without scratching
@hubacekivan 2 жыл бұрын
Bubbles like orange and still glued crookedly
@thomasbaytarian3342 2 жыл бұрын
@@hubacekivan You have to have a perfectly flat surface. Use a dual line splitter if you need to. It's what I always use. You can get one thru Yellotools. Dual Bodyguard Knife. Line the print up, press it in place at the center where you split the backing, and let it rip. This WILL NOT work on an uneven surface.
@thomasbaytarian3342 2 жыл бұрын
@@hubacekivan If you had a photo roller as wide as the print. You can kneel on the board with your shoes off.
@welduyikalo915 Жыл бұрын
Where I fund the matrial?
@juanjosejaramillo1016 3 ай бұрын
where can i buy the nife?
@signaramaspencer8018 2 ай бұрын
YelloTools.com
Lamination System
Рет қаралды 1,4 М.
Yellotools GmbH
Рет қаралды 4 М.
Yellotools GmbH
Рет қаралды 18 М.
The Maker
Рет қаралды 3,3 МЛН
Yellotools GmbH
Рет қаралды 23 М.
Yellotools GmbH
Рет қаралды 2,9 М.