Why Millions Get Silicone Caulk Wrong

Рет қаралды 667,565

3 ай бұрын

In this eye-opening video, we delve into the common misconception surrounding the application of silicone caulk. For years, millions have been misled into believing that using washing up liquid, dish soap, or window cleaner during the caulking process is essential for achieving a smooth finish. However, what many fail to realize is that this seemingly harmless practice can actually lead to long-term problems.
I reveal the truth behind the widespread practice of spraying solutions directly onto the silicone and tiles during caulking. While it may appear convenient, this method compromises the adhesive properties of the silicone. When tooled improperly, the edges and areas behind the silicone fail to adhere properly, paving the way for mold growth and premature deterioration.
But fear not! My video demonstrates a simple yet effective alternative. By eschewing the use of solutions and employing the appropriate tools, you can achieve flawless results that stand the test of time. Say goodbye to wrinkly, ineffective silicone caulk and join us in revolutionizing the way caulking is done. Watch now to discover why millions have been getting silicone caulk wrong all along.
Here's my Amazon page to check out the products I use*:
www.amazon.co.uk/shop/theaide...
*As an Amazon associate I earn from qualifying purchases.
About me:
I'm Aiden and I'm documenting what was supposed to be my barn conversion, which has now ended up being a new build. I don't have a trade, I just have a go and I'll be doing lots of work myself. This is the boring bit in grand designs that you don't get to see. Subscribe and follow along to find out how our future home turns out.
Instagram: the_aiden_p...
contact email: aiden@acer-view.com

Пікірлер: 608

@Reuben17505 2 ай бұрын

So does that mean if I spray my toilet with fairy liquid before I take a dump, I won’t end up with skids?

@THE-AIDEN-PROJECT 2 ай бұрын

I wonder how many people will be tempted to try this...I'm gonna pin it 😆

@Reuben17505 2 ай бұрын

@@THE-AIDEN-PROJECT Hahaha, joking aside that first bead is actually fairly typical of the bodge-it-and-scarper brigade these days.

@THE-AIDEN-PROJECT 2 ай бұрын

@@Reuben17505 but it might not be a joke, it might actually be a genius idea. Bottle it up and sell it 🤣 Nomoreskids

@Reuben17505 2 ай бұрын

@@THE-AIDEN-PROJECT 😂😂😂 Perhaps I should pitch the idea to Screwfix, when it launches I think it’s only fair they do a BOGOFF deal

@THE-AIDEN-PROJECT 2 ай бұрын

@@Reuben17505 I might actually do a little vertical video for this, I'm gonna mock up a nonsense type label 🤣

@evanpenny348 2 ай бұрын

Professional tiler for 25 years - retired now. Agree with this 95% but pushing the tipis definitely correct, for reasons given by others below. Also do not agree with the no fingers brigade. You can use your finger to shape the silicone, does a great job, but wet finger first or silicone will adhere to the skin and make a terrible mess. Also, note that mold growing on your silicone IS NOT caused by licking your finger. It is caused by the gap between the tiles being unclean. Always used toluole to clean all grease and oils off the joint area before applying the silicone. Well, that's my two bobs worth.

@Leo-gt1bx 15 күн бұрын

I agree

@johneaton25 14 күн бұрын

As another pro oldie the wet finger method with saliva is still the best 👍

@JordanG2024 11 күн бұрын

Mould occurs when you use non sanitary grade silicone. Clear will always turn yellow over time.

@Gwegm 3 ай бұрын

Consider my eyes opened! I'd fallen for the washing up liquid method up to now. Perfect demo of how it really works.

@PiglipsMaximus 2 ай бұрын

The world needs more men like this.

@klausschmitz4353 2 ай бұрын

Да это и так любому нормально думающему человеку должно быть понятно

@christophergallagher3845 2 ай бұрын

Applying the bead of silicone is just as Important if want it even and uniform without it spreading everywhere . In my own home where I have unlimited time I sand down the silicone nozzle to the shape of the corner being sealed I then mask of the lines and apply silicone and smooth down with finger . Removing the tape leaves slight ridges so I then use the soap water method to smooth over a second time knowing almost all excess silicone was wiped off in first smooth over. Takes longer but the finish is unmatched and you know that it's bonded properly

@stephen6640 10 күн бұрын

Admittedly, my eyes are also opened. This is a great informative video

@grrinc 2 ай бұрын

I’m a bathroom installer, mostly showers. We never use soapy water at all, for the reasons in the video. Plus those green tools are my favourite, just the right shape and rigidity. Great video.

@ScratchyBaws Ай бұрын

Met a guy 30yrs ago and all he ever did all day was silicone kitchens after they were fitted and he showed me to just dip/dab a finger in part water part washing up liquid in a wee glass then finish off your silicone bead with that finger. Also it helps to cut the silicone nozzle correctly and apply evenly. Practice makes perfect

@MsTatakai Ай бұрын

yeah i know that trick too... also my dad and grandpa used to do with finger and saliva

@joeysplats3209 12 күн бұрын

Yes, but only if you're practicing the right thing. Lots of folks practice doing the wrong thing and they're really good at doing the wrong thing. I guess that's kind of what you said.

@kallekas8551 9 күн бұрын

Yep…been doing it like that since 1988!🤣

@SteveN-pw4dj 3 ай бұрын

This explains why i have never had silicone fail... but have had stuff others have put on just peel off in a long strip....

@starck63 Ай бұрын

Been doing it for years without spraying anything, never had a call back. 👍

@glennwhitlock1272 3 ай бұрын

I've always pushed the nozzle along the gap instead of pulling, which sort of injects the silicone into the gap and doesn't leave a rounded bead. So much less waste when you pass your finger along. I'm only a DIYer and probably don't know what I'm talking about, but it works for me

@zweed69 3 ай бұрын

na 💯 bro you nailed it

@PeterJ-ij6mm 3 ай бұрын

100% correct. A professional cuts the nozzle back to a larger diameter and then pushes it along the joint. No need for fingers, liquids or tools if done this way.

@armoris66 3 ай бұрын

Never use your finger. Oils allow bacteria to form = mould; use tools whenever possible. However, if DIYing it you probably don't want to go to the expense of buying tools.

@glennwhitlock1272 3 ай бұрын

@@armoris66 good point, but I actually always wrap my finger in a wet wipe (plus, my dirty little digits have more than oil on them!!)

@robertgraham2926 3 ай бұрын

After 35 years doing kitchens and bathroom renovations that's the best method in my opinion. Cut the nozzle flat, not on an angle and push.

@AJackal 15 күн бұрын

Nicely demonstrated with the tile set up, kudos. A good seal is the most important thing of course so I won't be using the soap method in the future. But.. the reason it became a thing is because when you're doing longer lengths than just one tile, say 2m, when scraping you pick up enough silicone that it overflows the tool and it spreads everywhere and is a pia to clean up. That's why people started using this method. You've proven that it's a bad solution to the problem but I want to see a better one, just showing one tile being scraped is not enough, the first tile no soap is always fine by the time you get the third you start to have problems. You're a professional, a new video on techniques for a better solution to the mess would be appreciated. Thanks

@PRH123 2 ай бұрын

All of the UK needs to see your video. Every hotel where I’ve stayed in the UK even 5 stars in the center of London, it looks like they apply the caulk by shooting it from a meter away, smearing it liberally over the 5 layers that were already there. Not to mention painting over outlets, light switches, door hardware, splattering it over the carpet….

@christophergallagher3845 2 ай бұрын

That's not all of the UK. That's just diyers and plumbers 😂 got sink fitted last year asked plumber to leave silicone off and I'd do it behind the taps. His face looked shocked when packing up his tools as I walked in and started rubbing off the mess of a silicone job he done lol he had cheek yo ask me if something was wrong , I replied yes it looks like you've used your elbow to smooth this over lol

@christophergallagher3845 2 ай бұрын

I'm an electrician . People always upset when you have to change a switch or socket and when take the old one off take all the paint around the edges off with it too lol not my fault the paint iver the edges of it . Also see a lot of light switches with an X scored over it . That's the stanley knife cutting out the wallpaper on top of it 😅

@PRH123 2 ай бұрын

@@christophergallagher3845 well, I don't think diy'ers are doing 5 star hotel rooms... and plumbers don't paint walls and doors... Maybe it's something to do with the UK hotel business... but I've seen the same stuff in homes and apartments... I've done construction, so I know what "good enough for government work" means... but I've never seen as much terrible work as I have in the UK... honest, not trying to be a jerk, just honestly....

@christophergallagher3845 2 ай бұрын

@@PRH123 mate I don't like London I'm from Scotland the fact you're roasting London does not upset me it makes me smile lol I was mostly talking about the silicone work when I mentioned plumbers . Half the "tradesmen" in London are DiYers lol its why people from around the UK go work there for higher wages through the week then go home at weekends

@christophergallagher3845 2 ай бұрын

@@PRH123 what 5 star hotel in London where you in that had bad silicone 5 layers deep ? Curious , not that I'd pay for 5 stars there anyway lol

@lrc87290 2 ай бұрын

I always thought this was a bad idea. Thanks for confirming.

@webbo73 3 ай бұрын

Great demo - I've never used washing up liquid for this - didn't even know it was a thing. Best discovery I made was using the profiling tool rather than just the finger to stop it going concave. Got silicon round the bath that's been there for years and apart from a clean with some anti mould stuff every year or two, it's still good as new and no gaps. Love these practical little videos Aiden, thanks for taking the time to do them.

@THE-AIDEN-PROJECT 3 ай бұрын

Well if you never knew it was a thing you've done well 😁

@SK-xg9rs 3 ай бұрын

- apply silicon correctly & slightly thicker then your tool tip is - spray (there’s no issue with it if silicone is applied properly) - spray your toll & carry on… dress it nicely No, it is not easy for the beginners… as a lot of different things is no so easy when you’re just starting. 25+ years doing that way, no issues at all… but apply it properly.

@Leo-gt1bx 15 күн бұрын

Exactly!

@Nick-tz1ju 9 күн бұрын

👍🏻 indeed.

@johnjoeflanagan 3 ай бұрын

Excellent explanation of how to do the job properly.

@jamowallace 3 ай бұрын

Bought a profiling kit a few years back and use it all the time, have never used detergent and get superb results everytime Perfect video, well done my friend

@THE-AIDEN-PROJECT 3 ай бұрын

That's the way it's done 🙌

@sdgelectronics 3 ай бұрын

I'm always surprised how many videos show people spraying washing up liquid all over the place like you showed at the start.

@THE-AIDEN-PROJECT 3 ай бұрын

It's misinformation I tell ya 🤣

@dan-nutu 2 ай бұрын

Very similar to food & drinks commercials. None of what you see in those ads is safe for eating or drinking

@Orlando2001 21 күн бұрын

Looks good finish. One year later not so good !

@chrismccluskey3506 3 ай бұрын

Thank you! Finally someone who agrees. I’ve been told for years I was doing it wrong. As a plumber, I need the best seal that lasts and doesn’t leak. Not one that is easy and fast to install then peals off and leaks years later. I still make it look nice. It just takes a little longer.

@THE-AIDEN-PROJECT 3 ай бұрын

🙌 it's just not logical to use it hey

@ChrisHansonDev 2 күн бұрын

Great demo of what to do. Thanks!

@seanmellows1348 2 ай бұрын

Excellent demonstration. I’ve been a tile guy 20 years, started using soap water only in the last several, on account of Sal Di Blasi. I must adjust my technique, I’m certain to have some poor caulk out there. The challenge is with lumpy tiles, uneven stone, and cushion edged mosaic tiles. I can’t get a tool to work, finger finish is always required. Spray prevents spreading and smearing.

@jdoogg100 Ай бұрын

Exactly he didn't have a grout line to deal with or bumpy tiles

@grrinc Ай бұрын

I mostly tackle bumpy tiles by using the silicone tool in both directions and maybe adjusting angle. Not perfect, but better than one pass. I always informed customers that silicone bead will follow bumpy tiles and ridges

@jtcheng84 19 күн бұрын

When really bumpy or if there is a stark contrast in silicone colour to the surface colour, I use green painters tape to get it pretty close to a straight line before tooling.

@pseudonymn Ай бұрын

Thank you! I've got a caulk job that I need to undertake tomorrow, which I'm not going to lie is well outside of my regular wheelhouse, and I've been watching other so-called pro tutorial video clips make all of the recommendations mentioned here what not to do. But I said to myself, "OK, I think I got this, buuuuutttttt.... Let's just have a look here a this one last video and confirm the process!" And thank God that I found this video in time! I would surely have sprayed after caulking and left a mess on a time-sensitive job that I won't be able to repair later! Thank you for the leg up and major time saver!

@sevansoft 3 ай бұрын

Spraying the tools is a golden nugget of information 👍

@mp3backingtracks 2 ай бұрын

Excellent video and explanation!

@Dazmpower 2 ай бұрын

Really well presented and great information

@Morsmalleo 2 ай бұрын

Thank you for the tip mate, I'm getting ready to redo the Caulking in my Kitchen and Bathroom and this video has shown me what to do and what not to do, but the video has also revealed to me why the Caulking that's there already has been so slippery and broken down and useless

@portagee 2 ай бұрын

I can listen to this guy explain anything Good job thank you

@PaulsCarpentry-dq8tj 2 ай бұрын

Anybody could do that on smooth tiles. I would like to see you try on something bumpy

@gerrymcintosh4477 3 ай бұрын

Love this video, especially the fact that his sound is superb.

@THE-AIDEN-PROJECT 3 ай бұрын

Thanks Gerry 🙂

@ghengis430 3 ай бұрын

Brilliant! The first time i did it, i should have covered myself in washing up liquid! My new grout, done by the "builders " last summer , is already mouldy. I'll make that tool. Thanks.

@stevemann3375 3 ай бұрын

My wife swears by the wet finger method, hits the right spot and does a good job every time.

@THE-AIDEN-PROJECT 3 ай бұрын

😆

@damnthisuser 2 ай бұрын

LOL😆😆

@gregb8245 2 ай бұрын

Make sure to have a clean finger and go steady with the amount of pressure. I've seen lads wetting it with their tongue beforehand. I agree with you and your wife, a finger will usually give a good satisfactory result.

@Vgallo Ай бұрын

lol I’m a caulker and this video is hilarious, none of you know what your talking about, no offence , but it’s good cis it keeps me employed

@crazydaverocks 4 күн бұрын

Yep, that's what she told me too. 😉

@selflession 3 ай бұрын

To be honest I'd never even heard of spraying the tiles with water and washing up liquid as a thing. It seems completely counter intuitive to me. You want a clean, dry, dust free surface for the silicone to stick to so why you'd then want to put water anywhere near it until it's dry is beyond me. Great video though, as always.

@THE-AIDEN-PROJECT 3 ай бұрын

It is pure craziness 😆 I'm surprised a couple of people are standing by the technique in the comments 🤷

@ronaldsneek Ай бұрын

Finally! Awesome video my friend. Cheers from Holland.

@Chanmantroop10 2 ай бұрын

FINALLY someone with a video showing this. Especially with the tooling kits, they do a very good job removing the excess cleanly. Soapy water jsut makes the overall cleaning up easier as the excess isnt sticky but the joint will be compromised at the edges. Good job posting this!

@ptonpc 4 күн бұрын

Fascinating stuff. I had never heard of this before.

@Laughaholics 9 күн бұрын

Thanks so much for that awesome honest tip.

@misstrekfreak 9 күн бұрын

Great knowledge passed on for free! What a star ⭐️ thanks 🙏🏻

@jefff6167 11 күн бұрын

You’re a very good presenter. Thanks for sharing your knowledge. 👍🇺🇸

@jameslever3497 14 күн бұрын

My co workers taught me to spray the bead with detergent. That never made any sense to me. If you do it so it won't stick to your finger, how do you expect it to stick to the surface? I'm glad to find out I'm not crazy. Good video!

@MrJohnnyboyrebel 3 ай бұрын

Sorry if this is redundant, but I made the mistake of using an expired tube of silicone sealant. I had no idea that silicone has a finite shelf life. It was printed on the tube but I didn’t bother to look. Not only would it not skin, but it would not set up at all. I have to scrape it all out and get a new tube that had not expired.

@THE-AIDEN-PROJECT 2 ай бұрын

Ah that sounds like a right pain

@mihailfedorov5826 2 ай бұрын

Very reasonable! Thank you for sharing!

@jacobhenry2785 13 күн бұрын

Great explanation 👍🏼

@AB-yt4hd 3 ай бұрын

Oh, I understand now why I don't have those mold problem in my shower after 10 years (the silicon is still perfectly white) because I did it myself and used the same kind of tools as you and didn't use soap. A good ventilation in my shower helped too I guess.

@somethinlike23 8 күн бұрын

I've seen lots of videos where people just make a fancy cut on the tip and it basically automatically lays itself down perfectly.

@user-bt3bo7hl6f 3 ай бұрын

Excellent video, I had a silicon failure in my shower in less than a year doing it with soapy water.

@THE-AIDEN-PROJECT 3 ай бұрын

😬

@martinkiely3147 2 ай бұрын

Great video on this subject.First person I have seen do it properly I have been doing it this way for years I never understood why people used the diluted washing up liquid and water.First time seeing your videos 👍just subscribed

@jetme8815 3 ай бұрын

Preach Brother. Great job!

@supergrowler521 3 ай бұрын

Oh gawd…. I fell for the soap trick and have siliconed shower and bathroom. Eyes opened! Going to dig it all out and redo it…. Sometime! Cheers for the vid!

@RosaliaDEmalaga Ай бұрын

Thank you so much. Now I know why the soapy method was bothering me so much. Better live with an ugly line than with a molding one

@crazycoyote1738 10 күн бұрын

WoAh- water.. took us a bit of adjustment to understand, 😊thanks for sharing!! It worked perfectly first time!!

@ozcampnhuntdan7858 2 ай бұрын

I agree completely, just use the right tools and you can't go wrong. Icypole sticks are great for striking off caulking too.

@calvinjones2136 23 күн бұрын

Great content. Many thanks. 💪🏽🙌🏾

@chrishay8385 3 ай бұрын

Yeah ,ive never regretted getting the silcone tools they really take the stress out of siliconing.

@tommy-ij9nd 3 ай бұрын

Gees. Now I know why my tub window has mold everywhere. Thanks for sharing!

@Nick-tz1ju 9 күн бұрын

It's because you don't dry your bathroom. Try cutting out the sealant. Redo the silicone and do as you did before. It will mold again.

@gregforde6234 3 ай бұрын

Brilliant! Thank you so much.

@THE-AIDEN-PROJECT 3 ай бұрын

You're very welcome!

@ShafaqIftikhar-pw9ld Ай бұрын

Nicely done!!!!!!❤

@samsoulee 2 ай бұрын

Daaaaaamn, Man, you explained my hate for caulk in about 5 minutes. I'll do as you say next time.

@Kk-bq8sw 7 күн бұрын

Well explained. Thanks

@opethforlife 2 ай бұрын

You're absolutely right mate. I used the dish soap method and after a month or so the silicone detached itself from the sink.

@Leo-gt1bx 15 күн бұрын

It would have not adhered for the start if you had done it wrong.

@owenbutcher1954 29 күн бұрын

Well Presented 👍

@michaele.ebright8834 2 ай бұрын

I' learned this about 20 years ago and it works great, the only difference is I put the dish soapon my finger and then spread it out ask needed, Good video, thank you for more info for us

@gravey07 16 күн бұрын

Great video 👍🏼

@fabianrossini1691 Ай бұрын

Excellent bro!!!

@stevemartin4131 29 күн бұрын

Thanks, you’ve probably just saved me a disaster. Was planning on using the soap/water technique,as seen in other videos, on my newly tiled bathroom. I won’t now.

@AlsInd 3 ай бұрын

i had no idea people were spraying their caulk! who's stupid idea was this? i have been caulking for over 50yrs and have never heard of this.

@NM-zk8bg Ай бұрын

Probably every second KZfaqr spray their caulk.😂

@giuseppepeluso5450 2 ай бұрын

Awesome ! Perfect explanation keep posting liked and subscribed on principle!! Perfect

@ianweatherley45 3 ай бұрын

I am a window fitter & was shown on site by the mastic guys they use the wood tool and let it soak in the soapy water. I was also told you should ALWAYS tool the joint this adds to the adhesion so tool it at 45 degrees which also pushes it into the joint further , I have also found cheap silicone is rubbish & a nightmare it’s just too runny

@laurapalmerTDGE 2 ай бұрын

Use Soudal and wooden spatulas like the doctor uses.

@seniorwille3446 2 ай бұрын

Quality info👍👍

@krisholden8490 Ай бұрын

About time, well said 👏

@CF... 19 күн бұрын

The previous video said to do the opposite of your advice. It just shows you can't believe everything. Thanks for giving the reasoning behind your advice.

@THE-AIDEN-PROJECT 19 күн бұрын

That's why I made the video because of all the others saying to spray it directly

@phowied 3 ай бұрын

Corking tip! Always done it this way with Dow Corning 785 and it lasts many years. Werent that long ago a tube of it was 4 quid and now its a tenner.

@THE-AIDEN-PROJECT 3 ай бұрын

Dow seems to have a good reputation

@jason-hh6lu 3 ай бұрын

I saw it for £12.90 yesterday. 😖

@stevesvids 3 ай бұрын

I always use Dow. If customers present me with their own Brand X... I give it back and get the Dow out.😂

@N0C0MPLY 3 ай бұрын

Did you mean caulking tip? ;)

@johonass 2 ай бұрын

@@jason-hh6luwas it 30% Extra Free? 😂

@sterlingnorins9236 Ай бұрын

Popsicle hobby sticks & grout sponges cut into points are awesome disposable tooling implements.

@randomanonymoushuman 2 ай бұрын

thanks

@ronnyrobinson79 2 ай бұрын

proper useful video dude

@antonysimpson5304 2 ай бұрын

That’s right. I’ve always wondered if they achieve a water tight seal when squirting all that soap and water where you need the silicone to stick too. You explained it well.😊

@edsnotgod Ай бұрын

Super glue adheres to a substrate sprayed with water too

@andrews1467 2 ай бұрын

Thank you!!! it is the way to do it.

@normanboyes4983 3 ай бұрын

Good video Aidan. I use the Screwfix silicone tooling - which has upped my game. Isn’t it funny though no matter how careful you are there is always a significant amount of waste scraped off the tool into the bin.

@THE-AIDEN-PROJECT 3 ай бұрын

Haha I think if we did it more often then you can judge how much to lay down without having too much wastage

@nonamuss9991 2 ай бұрын

Thank you for busting this myth!!!

@ianforeman4377 2 ай бұрын

Good stuff thank you

@tonylawrence9157 3 ай бұрын

Good vedio. Subscribed.

@Crimson_Blade858 3 ай бұрын

I tried the washing up liquid method one time and had to re do it ALL!!

@marcinlag1 2 ай бұрын

thats good for high polish tiles with the matte or structure one it will be difficult to remove excess in that clean way without soap...

@HandySam 3 ай бұрын

Perfectly timed video for my siliconing ! 😎

@THE-AIDEN-PROJECT 3 ай бұрын

I'm sure you're an accomplished silicone applier 😁 looks like I missed some of your uploads, I'll have to check them out

@cihanbozkir 4 күн бұрын

I love the way you pronounce water. Thanks for the video.)

@user-gy6ky1xs3j 2 ай бұрын

explains everything. if only i had a time machine

@jezlucas3878 2 ай бұрын

Cool thanks

@andrewhirst8403 11 күн бұрын

Great. Loved it! (I'm SO CRAP at this, but will DEFINITELY go with your way.) 👍

@thfc4745 3 ай бұрын

very interesting, i have used all methods, never happy with the results. Cheers Aiden.

@THE-AIDEN-PROJECT 3 ай бұрын

You'll get it one day 😉

@wavydavy9816 3 ай бұрын

I'm a decorator and I'm forever having to re-do the silicone around bathrooms which (I'm assuming) have been done using this method by 'professionals'. I've seen kitchen fitters walk away _as_ the bead they've applied to the worktop is sinking down the back of the gap (that was Howdens). I have a whole bathroom to do next week _because_ all the silicone has failed I have standing customers and none of _my_ silicone has ever caused me, or them, any grief.

@THE-AIDEN-PROJECT 3 ай бұрын

Have fun next week 😁👍

@MrBobWareham 2 ай бұрын

I don't know why people think that silicon is glue, but it is not its only good as a gap filler, but a very good video, perhaps you should do a video on how sticky silicon is or not.

@janismiska Ай бұрын

Partly agree... There are infinite ways of doing this. *Using only fiber or rubber leaves thin marks on sides of gap, after some time they become visible... Using painters tape for limiting side marks leaves you with thicker sides of bead + you have to plan order of tape removal etc *Using soap liquid is nice if you can apply the silicone very precise and not leave uncovered spots Any of methods is self challenging and has + and - 😅

@rossmcleod7983 Ай бұрын

Subbed on the strength of that. Well done you!

@THE-AIDEN-PROJECT Ай бұрын

Much appreciated!

@BCToby 25 күн бұрын

Great tip another thing I've done is with my finger dip it and soapy water and slide it across. Because you're not wetting the edge where the gap can be you get a good seal as it pushes it in against the surface and doesn't stick to your finger

@richardwebb9861 3 ай бұрын

Excellent 👍, including the humour 😉

@THE-AIDEN-PROJECT 3 ай бұрын

Glad you enjoyed it

@silverfox8801 3 ай бұрын

Great video buddy 👍

@THE-AIDEN-PROJECT 3 ай бұрын

Thanks 👍

@diverbob471 3 ай бұрын

As a 20 year decorator, i never use washing up liquid when applying mastic or caulk, a bit of spit on my finger is perfect.

@tomalex4806 3 ай бұрын

Your finger is a source for bacteria and most likely help mould growth on the silicone especially if it's in a bathroom

@johonass 2 ай бұрын

I bet the customer loves that in the kitchen 😂🤦🏼‍♂️

@ShutoStriker Ай бұрын

@@johonass You don't let them see you do it 😉

@JP_TaVeryMuch 2 ай бұрын

Good on you for this how not to how to video. I think that you've got a job for life now, making "NO! NOT LIKE THAT YOU NUMPTY!" videos and I'm delighted to have found you. The number of times I've shouted at the screen when watching these self appointed experts is finally coming to an end, I hope, because of you. In regards to silicone sealing, I can happily carry on using a wet finger. Just have to remember not to put the same one back in my mouth...

@vicsaunders9710 2 ай бұрын

Nice one 👍👏

@Wilbargosh 3 ай бұрын

I use mineral turps to clean my joint, tools and finish the silicon with a profit tool. Mineral turps allows you to top up an area.

@YorkshireD1 3 ай бұрын

I've never ever used any spray before. Never thought about it tbh

@THE-AIDEN-PROJECT 3 ай бұрын

That's a good thing 👍

@jorissplinter Ай бұрын

I personally finished the silicone without soap fist, for that good adhesion indeed, and then used the soap water for a finishing touch. I hope that’s fine. Thanks for pointing out these potential issues

@wayneessar7489 14 күн бұрын

Why fist? Why not fingers?