Why My Knives DO NOT Have 90° Spines

Рет қаралды 44,139

Күн бұрын

The square spine is often highly regarded throughout the outdoors community. Today I thought I would share my thoughts and opinions on the square spine along with my reasoning for having rounded spines on my knives. If you're somebody that enjoys working with your knife a rounded spine could offer you a more enjoyable experience. Thank you to everyone who watches, God bless!

Пікірлер: 328

@debluetailfly 2 ай бұрын

Nice of you to state your opinion and reasons without telling the other guy he is all wrong. There is room for differing opinions. We all have to learn what works best for us.

@Rooster0529 3 ай бұрын

I knew where you were going with this when I read the title. I have gotten blisters from using my knife for carving and have filed a few back edges to round. I thought I was weird for doing it😉.

@KuskBushcraft 3 ай бұрын

It certainly makes a big difference! Thanks for watching!

@user-qp7vc9mo5t 3 ай бұрын

I’ve been using rounded off spines for years for that exact same reason! Great video!

@davidjacobs828 2 ай бұрын

File a portion of the knife spine rounded ... leave a portion of it with 90 degree corners ... best of both worlds . 🙂👍 Win win .

@RealBoiJare 2 ай бұрын

On my Mora companion I thought ahead about this and only made a 90 degree spine on about half the blade, further away from the handle where my thumb rests. This way it’s comfortable with full function

@Mr371312 2 ай бұрын

Cut myself through nitrile gloves pushing down and slipping, knife had 2 burrs on spine. Never knew round ones were a thing

@Vikingwerk 2 ай бұрын

People underestimate how dangerous a square corner on steel can be. My Dad cut the back of his thumb to the bone on a square-filed edge recently. I’ve seen a lot of ‘bushcraft experts’ arguing for a sharp square spine, which is really one slip from a bad injury, from the ‘safe’ side of the knife. Your argument for the round spine is a good one. I liked someone else’s comment here about leaving maybe an inch or so square at the tip, where you won’t be gripping it.

@jimbusmaximus4624 Ай бұрын

As a machinist, I agree. Cuts happen every day from handling edges right off the mill. Some knife edges are actually only a few degrees away from 90.

@dustywoolverton7463 3 ай бұрын

I agree, personally I am on both sides of this metaphorical fence, my larger knife has a flat spine (it's my chopper, not carver) my smaller knife is rounded for that comfort when I'm making traps, notches and other handy little things my larger knife isn't best suited for doing. Much love, hope you grow to millions soon, you deserve it.

@KuskBushcraft 3 ай бұрын

Smart man! Thanks for watching.

@TijmenHatesads 2 ай бұрын

That's my approach as well, and I haven't even thought about it before. Just seems like different knives need different features to be good at different things.

@wayward-saint 2 ай бұрын

On my bigger knife, I rounded half the spine by the tip, and left the half square by the handle. Feels like the best of both worlds. The rounded part is good for holding, batonning. The square portion can still strike a fire and do some scraping.

@kekipark77 3 ай бұрын

i dont have any knives that originally came with a square spine, but i usually grind a square spine towards the tip of the blade, about an inch, which works fine for me for striking and scraping. best of both worlds!

@ejan8088 3 ай бұрын

Same here :) Best of both worlds, maybe.

@KuskBushcraft 3 ай бұрын

Good idea!

@Wood_Chuck_Would 3 ай бұрын

Totally agree. I'll usually round off the first 2" of spine to save a sore thumb when carving or doing fine work.

@KuskBushcraft 3 ай бұрын

Good idea!

@markfergerson2145 2 ай бұрын

Those filed grooves some folks think are essential on the first couple inches of a knife’s spine always bothered me. Under what circumstances are those going to help? When does one need that much friction, to do what tasks? All of the fine work I’ve ever done with a knife involved direct force on the spine aimed at the cutting edge, not toward the point. Seriously, what’s the point other than Tacticool Factor? If the idea is to keep your thumb from slipping off, the grooves should be parallel to the blade. What am I missing?

@Wood_Chuck_Would 2 ай бұрын

@@markfergerson2145 I've never liked the grooves (jimping) either. Maybe they help when your hands are slippery with the lifebl00d of your foes?

@victorzaidan6493 Ай бұрын

Thanks for the supreme comment. discussion closed. the beginning is rounded, and after that it is square. Thank you very much, I will do that on my knives. you were simply brilliant.

@cdredger16 3 ай бұрын

I am a square spine guy. However, your discussion and reasons were well presented. Different strokes… Thank you so much for your content!

@KuskBushcraft 3 ай бұрын

Thanks for watching!

@Red-vi2ez 3 ай бұрын

Agree. I don’t know how it is in other countries but in Sweden almost every fire steel comes with a scraper. And that is often much more effective then the sharpest knife spine.

@bushcraft_in_the_north 2 ай бұрын

Totally agree with you. And a rounded spine was a sign of a good knife,and it is stronger.hvorfor skriver jeg engelsk til deg🤦🏼‍♂️....🔪🐻‍❄️🇧🇻

@dallasn16 3 ай бұрын

I completely agree with you here. A 90 degree spine is a useful tool but I prefer to use the spine on my saw.

@CasioSilver 3 ай бұрын

I've been carrying a separate striker for a few years now that I'm not just going out alone, people see the ferro rod and want to use it so I'd rather be able to hand them something other than a knife to decrease the risk of injury. Once I got into carving, that square spine was really getting annoying and bothering me so off it came, smooth is comfy for me :). This was a great, high quality video that was well paced and well presented and I will be sharing this with friends.

@KuskBushcraft 3 ай бұрын

Thank you for watching!

@alanbierhoff6831 3 ай бұрын

I’ve never bought, or passed on purchasing, a knife because it did or didn’t have a 90° spine. I buy knives for blade length, thickness, profile, metal, Rockwell etc. When people comment on how many knives I have, I ask them how many screwdrivers they have. Different tools for different jobs.

@dlrmon1 3 ай бұрын

OMG...you have me asking myself which I have more of, screwdrivers or knives? I don’t want too know...lol

@drunknnirish 3 ай бұрын

@@dlrmon1 Just remember if you dont have some nice insulated screwdrivers you aren't done buying screwdrivers yet.

@ksvideos7173 3 ай бұрын

Your videos have become my new go-too comfort. No moist-sounding ASMR whispering or yelling or obnoxious music. Just a man with his jolly beard and jolly accent enjoying the jolly wilds! I often fall asleep to the sound of that crackling campfire or you chopping twigs off dead trees for tinder! Big fan, much love, God bless, and happy Easter! ❤

@jons5898 3 ай бұрын

My knives have round spines for the reason you’ve shown and strangely enough after decades in the outdoors I’ve never had to baton a knife through a chunk of wood. A small hatchet is my choice for that task.🤷🏻‍♂️

@martymartin2894 3 ай бұрын

Exactly I can never understand some outdoors people using knives as hatchets.

@KuskBushcraft 3 ай бұрын

I don't baton either. A hatchet will always out-perform a knife when it comes to chopping and splitting. Thanks for watching!

@justinw1765 2 ай бұрын

Makes sense. What happens though, if with the Earth's ever faster weakening magnetic field, the Sun unleashes a doozy or combo doozy of Solar CME's and the electrical grids get completely taken out, and then you have to live out of a backpack for a very, very long time? The lighter your bag, with the most multi functional equipment, the better, because you'll be faster. People will become a problem real fast, and the faster you can "bug out", hide, etc, the better. Ain't no way that I will be carrying around a heavy axe or even a smaller hatchet plus a knife, when a good knife can baton. All my equipment will have to (and does) fit either one of three criteria: Multi functional, light weight and/or compact, and durable for the weight. Remember, all of it has to go on your back plus food. You're not a weekend warrior in this situation. Your life depends on your knowledge/skills and tools/gear. It's a different way of thinking, and hopefully it won't come to that, but the probability becomes ever greater the weaker the earth's magnetic field gets. It's really not a question of "if", but of "when" at this point. Unless TPTB decide to spend the billions to upgrade and harden the electrical grid systems. Heck, I can't even get my local electric company to finish burying our neighborhoods' lines like they said they would and started to, a couple years back. I have little faith in the entire worlds' grid systems getting updated properly in time.

@bushcraft_in_the_north 2 ай бұрын

@@justinw1765you really need to relax a little. Yes everything can happen,but dont think that would be the thing that saves you. And a lot of other things can happen too. And I would still carry a axe or atleast a very large knife.

@justinw1765 2 ай бұрын

@@bushcraft_in_the_north I have a 6 in blade knife, big enough for batoning and self defense, but light enough to carry easily. Then I have a couple small, very lightweight elastic ceramic/HIC (high impact ceramic) knives for skinning. And one spear knife for big animals/self defense.

@user-mj4yo7pi9j 3 ай бұрын

Funny you mentioned the " salesmen " thing . I watch alot of KZfaq ,Mainly "bushcraft " and i got to thinking 🤔 cause i do watch your video's and yr never trying to sell , yr to me , a guy that loves being out there in the woods and a KZfaq Creator as well but just laid back chilling smoking yr pipe enjoying nature , not selling anything !! Good information 👍

@adamwright4969 2 күн бұрын

I totally agree with you, not only is square uncomfortable and unsafe, but a round spine can also be a stress relief. None of the knives or other tools i make have square edges.

@LokiMacGuyver 2 ай бұрын

This is a good argument as to why people should carry two knives. All of the have their purposes and advantages.

@thomasmusso1147 3 ай бұрын

👍👍👍 .. good points raised. Square or Round .. I take it as I have bought it. I cannot get into me yet, to to put a file to modify a knife blade. All of my Ferro Rods have their designated Scrapers. An old hacksaw blade, shortened appropriately, makes for a very good scraper .. the hole at one end for attachment, already being there. 'Mantras' .. the 'Outdoors' is full of them. '550 Paracord / Ultra-lightweight / 36 Bank Line / Cotton Kills / etc, etc 🙄. Failure to comply (and buy 'their' essential-for-survival 'stuff') will result in 'Nature, She will Kill You'. 🙄. Actually, 'Nature' is completely indifferent to .. not even aware of, whether we live or die. It is what it is and we must adapt accordingly. A good share .. thanks. Take care ..

@KuskBushcraft 3 ай бұрын

Wise words! Thanks for watching!

@Cale_Davison 2 ай бұрын

Mother Nature takes over when Mother Nurture fails. So I am told. Thank you for being a gentleman and teaching.

@thegreyghost2789 3 ай бұрын

Thats an interesting take on the subject and one I have to agree with. A good example is Horace Kephart who's knife never had a sharp spine and he likely never had a ferrocerium rod either. On the other hand, modern bush craft and survival knives often come with sharp spines and perform a myriad of functions including fire making. Its all up to the individual and what they feel comfortable with. I'm 70 yrs of age and have used both over the decades and am good either way.

@maxpinson5002 3 ай бұрын

AFAIK Kephart or Nessmuk or any of those early outdoorsmen batoned wood or were advocates of batoning. From their books I do know that they suggested axe/hatchet features and uses. JMHO- I wouldn't compromise my irreplaceable knife in a survival situation by using it as anything other than a cutting tool. But as theman said, everyone is free to do as they please. I'll never call the knife police on anyone 😂

@andrewkeeton3627 2 ай бұрын

Right on man. Appreciate your take on “right and wrong” and doing what you want with your stuff. Backing it up with knowledge is the cherry on top. Too many sell-outs on KZfaq

@braunwm 3 ай бұрын

I get your point, and if folks are looking to do a lot of carving in the outdoors with only one knife, I agree with what you are saying. Having said that, I like to using carving knives for carving, and keep my larger survival knife (Mora Garberg) for larger work where I wouldn't be using my thumb or other fingers to guide the blade. So my Garberg does have a 90 deg spine for scraping material, ferrorods, etc. Though I usually just carry 2 or 3 lighters with duct tape wraps, and rarely use my ferrorods.

@patrickpilon1978 2 ай бұрын

My knives have the best of both worlds lol. I usually have a 1” spot close to the handle that is filed to a 90 degree and the rest is rounded. I agree with you just cause something works for one person it may not work for another. Love the videos keep up the good work

@rogwarrior1018 3 ай бұрын

I never thought about the wear and tear a square spine could cause. Excellent point. If something works keep it, no right or wrong just what you're comfortable with.

@andrewczuba498 3 ай бұрын

I just bought 2 knives this winter. A Morakniv Garberg in carbon steel, and a Casstrom No,10 SFK in what they call Sleipner steel, which is I think carbon steel, it's definitely not stainless. Both have 90 degree spines. Both are about 4" blade. Both are beautiful tools. The Casstrom came extremely sharp out of the box. The Garberg I put to the wet stone and then the strop! I also bought an uberleben large ferrocium rod this winter as well (which came with a striking tool and a lanyard) . I'll probably use the striking tool to start fires! I also always have a buck saw and hatchet or small woods axe with me. I'm moving (this week) up to just about as far north as you can in New England to the place around these parts which is as close to wilderness as you can get without going to Canada (hahaha- we are surrounded by Canada on 3 sides- I'll need to renew my passport!) so I plan to put these tools to some use and learn to use them in more ways. I really appreciate you sharing your skills and knowledge and enjoy your content. Thank You!

@johnovanic9560 3 ай бұрын

Excellent info and it makes me wonder how I made it through all those years without a 90° spine. I grew up being trained on the one match fire from there I got into Buck skinning with flint and steel ferrocerium rods are relatively new for me. I do like them but carry a striker with mine

@prado.offroad 3 ай бұрын

i agree, my Kansbol tore my thumb up from the start, i do use the squared spine to debark and smooth down walking sticks out in the bush but found rounding the first inch of the spine near the handle to give me the comfort and control when cutting making it a much more pleasurable tool to use.

@CommonCentsOutdoorsman 2 ай бұрын

I go both ways on this one. Sometimes on the same knife. There can be merit either way. Great discussion!

@skeetermalcolm1655 3 ай бұрын

What you are saying really makes sense brother, thanks for the info

@michaeleveleth7979 3 ай бұрын

Thank you for this awesome insight and another thought on how to use your tools more completely. Happy Easter, God Bless

@KuskBushcraft 3 ай бұрын

Thanks for watching! Happy Easter to you and yours! God bless.

@user-yy2id4gl6x 3 ай бұрын

On point about use.We make our tools for what we need works out better in the end. I use my ferro rod like you do its better.God Bless Geist Wulf

@KuskBushcraft 3 ай бұрын

God bless you too!

@cmh8133 3 ай бұрын

I agree with you. I have my thumb on the blade opposite the cutting edge all the time.

@johndonato3638 2 ай бұрын

I have to say - at first I did not want to agree. But you make a very compelling case, and demonstrate that case very well. Thanks!

@lukedupont8564 2 ай бұрын

Great discussion! I love to hear alternative takes on generally accepted wisdom, just to challenge our thinking and assumptions. As a wood worker, I can say that I've on many occasions, after flattening the back of a chisel, created a sharp 90 degree corners, and after paring (holding the chisel in two hands, one around the blade of the chisel) looked at my hand later and wondered how and when I'd managed to cut myself so many times! One quickly learns to just ever so slightly round off the corners. Makes sense that you might want to do the same for a knife. As for me, despite also liking to do crafts around camp, I like the 90 degree spine on a knife just because I don't like the added bulk and awkwardness of a dangly striker tied to my firesteel. But I often have to live with that anyway, because I'm in Japan and often use Japanese knives which are made of laminated steel -- the steel on the spine being soft, and unsuitable for striking a ferro rod anyway.

@c.abarker9915 3 ай бұрын

Great video Riley! Thank you for sharing your perspective! Very, very well done!!

@KuskBushcraft 3 ай бұрын

Thanks for watching!

@terrym1065 3 ай бұрын

Smart and sensible content. I have many knives in both configuration, I much more enjoy using a smooth rounded spine also. All my firesteels have a dedicated scraper but I only use them when needed. Thanks for the video, well done.

@KuskBushcraft 3 ай бұрын

Thanks for watching!

@pedroferreira4134 2 ай бұрын

Your explanation makes a lot of sense. Thanks.

@frankpristov9745 3 ай бұрын

Think for yourself, work out what's best for you. Words of wisdom Rieley thank you.

@KuskBushcraft 3 ай бұрын

Thanks for watching!

@TheUncarvedBlock 2 ай бұрын

This sounds like very pragmatic and unbiased advice. Thank you for sharing.

@Kgib338 3 ай бұрын

Very interesting. I always appreciate your insight on woodsman living. Good video.

@user-ox1og7xu5y 3 ай бұрын

Well said... great perspective brother.

@codyschmid2271 2 ай бұрын

I needed to hear that. I live in Wisconsin & I'm from here. Your the reason I'm taking up Bushcraft. Thank you. I appreciate you so much. Your videos give me peace and knowledge & please keep doing these videos. Hugs brother ❤️

@charlesmckinney 3 ай бұрын

I prefer a dedicated scraper for use with my ferro rods. I like the scrapers sold by Bayite.

@alanbierhoff6831 3 ай бұрын

+1 on the Bayite scrapers 👍🏻

@ericstoever9577 3 ай бұрын

Thank you for sharing your thoughts! Be well, stay safe, and god bless!

@Crosswalker. 3 ай бұрын

I totally agree and am doing the same, don't like flat spines, never have... I use knives for what they're made for, cutting and whittling so I file it round too! 😅

@richardholappajr.6184 3 ай бұрын

Thank you for the informative video. Always learn something from your channel!

@KuskBushcraft 3 ай бұрын

Thanks!

@Sean_H80 3 ай бұрын

I always appreciate your videos and adventures. God bless you and Happy Easter.

@KuskBushcraft 3 ай бұрын

Happy Easter! God bless.

@OutpourOutdoors 3 ай бұрын

Question everything! Legendary video brother 🙏🏽

@elizabethmontalvoe-townmus9158 3 ай бұрын

Makes sense, thank you for sharing.

@dobrofool 2 ай бұрын

I like it. Love thinking out of the box! Thanks man. Blessings 👍

@robb4044 2 ай бұрын

Your explanation was reasonable and logical and respectful. Great video

@SotoJeleb 3 ай бұрын

I never understood why so many people like square spines. Everybody keeps saying it is for scraping but you can use a rock with sharp corners to scrape wood or firesteel. It would only make sense when there's a lot of snow and you can't find a rock.

@Jesus4444me 3 ай бұрын

Perfect timing, I've been trying out knife edge vs spine and found much better results using the blade in various tasks. Tools were made to be used! A pass or 2 on the diamond stone, plus a few passes on the back of your leather belt and you're back in the fast (sharp) lane. Great video and information as always. And an even greater beard, a masterpiece on its own! God bless you brother ♥️🙏🏼

@KuskBushcraft 3 ай бұрын

Most definitely. A quick strop will liven your edge right up. Thank you for watching! God bless.

@waltdenis9621 2 ай бұрын

Always great content!

@marcbenoit9150 2 ай бұрын

Thanks for this video. I've always gone for the square spine and put up with the uncomfortable pressure at times. You are correct, 99.9% of the time I use the spine for my ferro rod. What really made sense to me in your video was to carry a striker with the ferro rod, that way if the rod is lost with the striker, I still have a comfortable knife in my hands. Without the ferro rod, the square spine, in my case, wouldn't be of much use to me. Again, in my instance. Thanks You!

@les3449 3 ай бұрын

I see your point and agree to an extent. I think the people that advocate a 90 degree knife spine are looking at multiple uses for any one piece of gear, as you acknowledged. Attaching your striker to your ferrous? rod is a good solution. BUT, many people venturing into the woods/wilderness don't think of more than one way to do things SO they need guidance and to think outside the box. Thank you!

@WayPointSurvival 3 ай бұрын

I fully agree. Well said!

@KuskBushcraft 3 ай бұрын

Thanks for tuning in, James! Happy trails.

@jimbusmaximus4624 Ай бұрын

I agree with this wholeheartedly! I never understood the folks who act like it's absolutely mandatory for a knife to strike a ferro rod, to me its an unfinished knife. I've NEVER carried a ferro rod without a striker. Ever. The fire steel shouldn't be your primary method of starting a fire anyway. We have lighters and matches now. Awesome video sir! ✌️

@richard_n 3 ай бұрын

Fantastic video, I agree with you on the points you brought up. Especially with having a dedicated striker for your ferro rod.

@snowjoe43 2 ай бұрын

Your so right. Thank you for your wisdom.

@catskills7791 2 ай бұрын

Thanks for the video. I actually prefer a 90 degree spine but I do appreciate why you chose the alternative. More importantly I appreciate and applaud your objectivity and critical thinking. Absolutely critical to navigating modern society.

@frost8077 2 ай бұрын

That's refreshing to hear, adding some variation to knives. I'll probably never get around to doing enough wood carving for me to need a rounded spine. I always liked knives that have a protruding thumb grip on the base of the spine with jimping. For anything finer, I just switch over to a smaller knife.

@southernyert7597 2 ай бұрын

Enjoyed the video. Grt explanation for both sides. No wrong or right, just whats best for u. Wished more videos was like this. Grt points to both sides

@Thankyou_3 3 ай бұрын

Thank you brother for the advice 👍👍🙏🙏👏👏

@barcibus 2 ай бұрын

I can just keep listening to this guy, and feel at peace.

@ROE1300 2 ай бұрын

👍 Interesting point of view. Makes me rethink the spines on my knives. I agree there is no one 100% right answer.

@mikenicholson2548 2 ай бұрын

Great perspective. 👍

@paddor 3 ай бұрын

Very good input. Thanks

@KuskBushcraft 3 ай бұрын

Thanks for watching!

@VJLasorsa 3 ай бұрын

Yes I enjoyed this discussion God Bless

@KuskBushcraft 3 ай бұрын

Thanks for watching! God bless you too!

@jacobkoen8994 2 ай бұрын

As a bladesmith I really appreciate your thoughts on this, I always preferred a rounded spine as well for the same reasons you mentioned, and I also carry a separate striker or cheap blade for my fire starting. Unfortunately in the bladesmith/knife making community rounded spines are looked down upon, like you were unable to achieve a squared even spine lol glad there are others who think the same!

@Mike990920 3 ай бұрын

Neat! I have a variety of folding knives. But I’m not a bushcraft guy, so I collect various kindling materials and prefer a long-stem bbq lighter for fire starting. But even just for the purpose of food prep, I find the squared back edges of my folding knives painful. I may consider rounding them. ☮️💕

@jouzel8951 2 ай бұрын

Nice work! My laminated Mora blade is my light weight carving knife, round spine. My Mora companion is my general purpose knife has a square spine. Thanks for the excellent content!

@raybo34 3 ай бұрын

You have some valid points and I agree, a person needs to find works best for them. If my tasks require my thumb on the spine or if I was using a pinch grip I would want it rounded.

@williamfawkes8379 2 ай бұрын

I sure do agree with you on this. I have purchased some blades, or chisels, that have such a sharp square that they are lethal on my hands.

@TwoRiders 2 ай бұрын

Well presented and well argued. I do a video or two and they are about things I have had for years, usually. I'm not chasing or shilling the flavor of the month. Much of KZfaq is commercials dressed up as reviews. Glad you don't go down that trail. Thanks

@uncletoad1779 2 ай бұрын

Interesting argumentation. And a good channel.

@allangarrity8778 2 ай бұрын

think for yourself- question what you see and hear - terrific advice in any environment - thanks for the video - looking foeward to the next...

@sixgunfun78 2 ай бұрын

Good advise!

@fondolon 2 ай бұрын

I like to carry a small carbide sharpener for fire starting as well. Served me well for both processes and cost about $7 and last 6-8 years with high use. Good video.

@Terry_weston4570 2 ай бұрын

A good instruction. Thank you.

@MedicGeorge 3 ай бұрын

Good talk!

@MoxFoxhobbies 3 ай бұрын

Great video i love your take on what works for you. I use a carbide knife sharpener as a scraper for my ferro rods. (I never use it on my knifes but its nice to have)

@MatthewdePaula 2 ай бұрын

Totally agree. The sharp spine trend is something I've never bought into for all the reasons you state. And I put "jimping" into that same category--not suited to my tastes and for how I prefer to use my knives.

@awayinthewilderness4319 3 ай бұрын

Well put 👍

@KuskBushcraft 3 ай бұрын

Thanks for watching!

@jerryashbaugh169 2 ай бұрын

Very well presented. I agree, it is a personal choice based on primary use.

@docsavage9773 2 ай бұрын

I’m with you on this topic. I use a dedicated striker as well. And, you can scrape with your knife edge better than the spine. Not to mention, ferro rods spark at a very high temp. I’ve often wonder what long term effect that would have on the knife steel when the spine is used. Thank you for the great video dude… keep it up.

@bugoutbrad8395 3 ай бұрын

Great advice brother. 👍 Happy Easter 🐣 Cheers 🍻

@KuskBushcraft 3 ай бұрын

Thanks for watching! Happy Easter!

@delta9jms 2 ай бұрын

I crowned the spine of a Spyderco Manix 2 just with sandpaper .. it took a long ass time and didnt think I'd do it again, now that you have given me the idea to use a file, I might have to give it another shot with a file to get the majority of the material removed and then switch to the sandpaper for that silky smooth finish. Thanks for the idea.

@scipio7837 2 ай бұрын

Fully agree. Most hunting knives have always been rounded. And while I carry a firesteel, there's nothing wrong with using a Bic as a primary. Testing yourself to keep skills current is one thing, but when you want coffee now...

@quinntheeskimooutdoors6234 2 ай бұрын

Thanks for sharing 😊

@bogdanvasut8915 2 ай бұрын

Finaly someone said it. After whittling for a day w/ a square spine knife and having may left thumb surface turned to a tender crisscross pattern I decided to round the back of all my knives, even the Opinels

@Divici02623 2 ай бұрын

I’m definitely a square spine guy. That being said, I’m definitely subscribing to your channel

@jackassery73 2 ай бұрын

Very well said. My main knives are all rounded off for comfort as well. One I filed about an inch at a flat 90 at the tip. Just the tip! 😂

@GoranPeuc 3 ай бұрын

This is true. I have a couple of hard square back knives and I’ve cut my fingers on those spines. I might actually file and sand one of those to see how it feels.

@KuskBushcraft 3 ай бұрын

I've definitely cut myself on the spine of a knife before too haha.

@waterbox4202 2 ай бұрын

Ever since I started making knives in 2017, I've always preferred a round spine, so much confortable and elegant looking

@safromnc8616 3 ай бұрын

I agree w/you 100% - it's always been a comfort choice for me. I like the sharpness to be on the cutting edge of the blade....no where else. I've been carrying a knife of some sort since I was about 6....lots of trail & error in there....

@pierrejohnson6264 Ай бұрын

My feelings also. Jimping sucks as well. Nice, calm, and focused presentation.

@rickwhitson2804 3 ай бұрын

Very wise info 💯

@waveman0 2 ай бұрын

a round spine is very professional and I like them. I also agree with the concept of a dedicated striker for your ferro rod, I lean towards an HSS lathe bit.

@scottculver 3 ай бұрын

Great to hear somebody say it. THINK free.

@JesusSaves86AB 2 ай бұрын

I like both. To each their own, especially in the outdoors. I use a keychain knife for my ferro rod.

@getsmart3701 3 ай бұрын

Good call sir, I say that because I file my square spines as well:-). That said, I do keep a square spine on my larger knife which I often use two handed and find the sharp spine is a nice tool for de-icing branches before splitting them down.