The HX40 .82 housing will fit the HX35 without any modification to the turbine wheel? Thanks
@discoverychannel83893 жыл бұрын
it says hx40 in the titel so does it fit a hx35?
@claudiavasquez21603 жыл бұрын
hi bro , i have the same question , can you help me please
@jmoore98063 жыл бұрын
what rpm did you see boost ?
@9256steven4 жыл бұрын
As a design draughtsman at Holset in Huddersfield UK, I detail designed the HX35 along with the Midrange engineer. It's my baby. Holset Engineering Co. is now Cummins Turbo Technologies, I worked there man and boy for 32 years, my son is still there, it's a great place.
@chicagomike66664 жыл бұрын
Thank you sir!
@nemanacemu20244 жыл бұрын
That’s awesome. !!!
@konigvonpreuen80654 жыл бұрын
Do you happen to have access to the specs of all the different HX35 variances and their compressor maps? :)
@Russell_and_Rosko4 жыл бұрын
Wow! What an amazing opportunity. Beautiful that you passed that onto your son
@Evilempire-dg8dz4 жыл бұрын
Steve Fletcher I have a question for you how would I delete the internal waste gate and change the exhaust housing on a he400vg I’m doing a budget build race truck and I got my hands on this turbo and don’t know what I can do with it
@WITTYFAM4 жыл бұрын
This is great info and exactly what us car guys look for "mo power baby" and still being affordable. That's smart👍
@rars0n3 жыл бұрын
The Holset HX35 has been the secret budget turbo for decades now. I figured everyone would have found out about them by now. I think if you're laying money down for a brand new turbo, you should buy the best you can afford. If that means it costs $2000, so be it. When you get up to that range, a lot of times the differences come down to things like ball bearing CHRA, which technically might not make a huge difference, BUT when chasing down that last extra bit of power, you really do get what you pay for. I loved it when Cleetus put the ball bearing Precision turbo on his auction Corvette, and seeing how when he shuts the engine down that thing spins for DAYS. I personally have my eye on Forced Performance's Xona Rotor line of turbos. I'd love to try running one of those. That said, for budget builds, you can't go wrong with a quality used turbo. I'm partial to Mitsubishi myself, because I've used their turbos and loved every one of them. My first turbo swap was a used 14b that I bought off ebay for $80 (this was back when the cheapest new turbo was a small 16g for $550, nobody knew about Holsets, and Chinese turbos didn't exist). I was rather disappointed when it arrived because the turbo was coked, so bad that it wouldn't even spin freely. But I was able to take it apart and rebuild it just by thoroughly cleaning it out, no parts needed replacing. The previous owner had ported the exhaust housing as well, so that thing RIPPED! Taking a turbo apart is not that big a deal, just make sure you mark the alignment of everything and put it back together the same way. Loctite that shaft nut or you'll end up with a smooth compressor wheel (don't ask me how I know this)! This is why I love Mitsubishi journal bearing turbos, because they perform well and are super resilient. Even if you abuse them, they're easy to clean and revive. I would buy a used known turbo, like any Mitusbishi or Holset, long before I'd ever buy a new Chinese turbo. Why? Because you know what you're getting, and they're quality precision parts. I think Holset is probably the better way to go as they're cheap, and like you said, they're engineered to last a long time. A Mitsubishi turbo is more likely to have been abused and subject to extreme conditions like my 14b was. But I'd still rather buy a coked up turbo for $100 than spend more on a Chinese turbo. From what I've seen, a lot of these turbos seem to be a mishmash of whatever they have laying around. That might work out fine for you, and they might be assembled and balanced correctly, but it's an absolute crapshoot as to what you're getting. That's not to say that parts made or assembled in China are automatically bad. Good manufacturing CAN be found in China. I know nothing about CX Racing or their turbos other than what you stated in this video, and if they're doing it right, their turbos are probably great for the money. But there's a reason why new turbos cost as much as they do, so I personally wouldn't buy one. I'd rather stick to a known quantity, whether that's a new FP turbo or a used Holset.
@Thedave22244 жыл бұрын
being a diesel guy (specifically 12 valve cummins) its crazy to me that gas guys love this turbo. for our application on our cummins trucks this turbo is tiny and cant make more than 300hp. for us to make big power normally around 1000hp we run 70+ millimeter turbos
@BoostBrothersGarage4 жыл бұрын
Diesels just have soooo much exhaust energy they require monster turbos
@djkrutina22564 жыл бұрын
Its incredible to see how much power you guys make with our stock turbos lol
@qers4 жыл бұрын
Saw an ad pop up locally on Facebook Marketplace for HX35 turbos for cheap. I thought he was scamming so did some research only to find out they just are that cheap. Changed my plan to swap a 1JZ into my E36 and going M50B25 with an HX35 instead.
@BoostBrothersGarage4 жыл бұрын
That’s a perfect combo! I love the Bimmer straight 6’s, and they eat boost all day long
@qers4 жыл бұрын
@@BoostBrothersGarage Not to mention they sound so fking good with a decent exhaust. I live about 2hrs away from the Nürburgring, so once it's swapped it's getting Ring duty.
@rars0n3 жыл бұрын
@@qers That's awesome! I don't know if you've done it already, but post some Ring videos if you can!
@qers3 жыл бұрын
@@rars0n Life got in the way, new house, another car, nationwide lockdowns etc. I'm still looking for a decent donor car for the engine and drivetrain swap.
@rars0n3 жыл бұрын
@@qers Ah! Sorry to hear that! But keep the dream alive! And let me know if you make it work!
@alltheboost5363 Жыл бұрын
I've been running a hx35w... Same one you have since the early 2000s. I recently went from a 12cm housing to a 10cm housing. I was originally going to do what you did but then I'd have to remake my exhaust and I have a Turbo support bracket. And I haven't had an exhaust leak in 6 years. I didn't want to open that can of worms. Anyway, I bought a rebuild kit and a billet compressor wheel at the same time. I've probably got 6 or 7000 miles on it... it's on a 2.8l. Spools around 3k. Sounds amazing it's a 5x5 design extended tip 54x78 Extended tip to 81mm. I highly recommend the bullet compressor wheel. If you're after spool go with a high blade count compressor top end 5x5. I did everything myself and didn't balance it. I run it a 17psi.
@psavel2742 жыл бұрын
Totally agree about the hx35. Its pretty much my favorite budget snail. I've used them on a few different builds, my favorite being a top mount setup on a N.V. m50 with a Cometic/ ARP'S running on MS3. Put down around 450whp RELIABLY, and still had quite a bit more to go. These compressors can be had for as little as $100 or so in used condition, and you can get a rebuild kit for around $100 as well. They also come in both I external and internally gated versions. The letters on the end denote that. I believe they are either denoted as a 'Y' or 'HY.' They are also plentiful too which makes them great to use. Good video, some nice info on the Holset. We definitely think alike both liking these turbskis 😎👍
@LEEROYJOKKEZ2 жыл бұрын
Are you running an M50b25? What is the spool and throttle response like? Im curious as im thinking of running a turbo M50b25 in my track car in the future. Hence im looking for good spool and throttle response without breaking the bank.
@caveone-3652 жыл бұрын
Yes non-vanos m50b25 although it can be done with any of the m5x, m20 or m30 platforms. The response and spool up time/ lag is very similar on all the m5x for example. You have to think that the hx35 is accustomed to be ran at much higher psi on the Cummins motors and worked much harder than it would be on any of these bmw engines. It is pretty much the perfect size compressor for the displacement that you are working with. You can throw a generous amount of boost at them and it isn’t even ‘breaking a sweat.’ I prefer the N.V. motor over any of the others for this specific application because of availability, price, simplicity and the forged internals. The fact that if something goes south on it, you can grab another to drop in for extremely cheap. To originally perform the swap if your car isn’t an m50, you can buy a complete roller with everything you need to start the swap out and get it rolling. For instance a ‘92 325i or ‘92 525i that has accident damage or body that’s hammered to hell can be found simply to get you started. Early e36/ e34’s that people have ‘given up’ on are quite common and if you find a wreck that doesn’t have any damage to the drivetrain you can even find them for basically scrap value. I’ve seen decent running and driving e36 or e34 chassis m5x cars for
@coronapack4 жыл бұрын
Take the silencer ring out. There IS a whistle difference. If you wanted to really go nuts, send the compressor housing off to get a 51r mod. That mod makes the turbo spool sound insane.. turbo labs guy is a turbo genius if you have any questions on your center cartridge.
@wyattfrey60793 жыл бұрын
No...it dosent the only thing that effects the sound is the exhause wheel
@coronapack3 жыл бұрын
@@wyattfrey6079 I understand your thought. But you are incorrect.
@wyattfrey60793 жыл бұрын
Hahaha its not my thought its Banks power and Gharret turbos thought🤣🤣
@josesancheztrejo60272 жыл бұрын
I herd that the 6.0 2003 and late 2004 powerstroke whistle insane is not only the variable turbo but it had i believe 9 blades on the exuahst , then ford went to the 11 or 12 not sure, to reduce whistle because some customers complaind about the whistle. But i do belevie you have whistle from the intake and from de exuahst as well.
@PolandGamerPL4 жыл бұрын
Going Holset HX40 Super or Competition on my 2jz soon. Can get a brand new genuine one for 400$. Can't beat that
@DUALOVERHEADCAM4 жыл бұрын
Where can I get one for that price ?
@jimbojimson4 жыл бұрын
Kind of wish I bought an HX40 instead of the GT35R I bought. I justified it because $1,000 used seemed like a good deal next to the new price, but I could've had the whole setup instead of the turbo alone
@lafondla213 жыл бұрын
This has convinced me that this would be mint for my 2.4 l5 volvo build.
@BoostBrothersGarage3 жыл бұрын
Heck yeah!
@xxmobster7xx3693 жыл бұрын
@@BoostBrothersGarage do you think it will be good on a 2011 3.7 v6 mustang?
@MidnightMechanic4 жыл бұрын
Being a smallish turbo, doesn't take as long to spool up either. I've seen these things as replacements for the stock GM turbos on 6.5's, which, let's face it, Holsets are a huge upgrade. Two of these can generate the same amount of boost as a gigantic one, and for an engine governed at 3600 rpm, plenty of meaty boost to work with. I'd say that's where smaller turbos really shine, getting that initial spool up at low end rpm, damn near idle, great for autocrossing, corner acceleration, and of course Diesel towing.
@Russell_and_Rosko5 жыл бұрын
That HX on a 5 cylinder is going to sound bananas. Big cams, long tubes...yeah buddy!
@BoostBrothersGarage5 жыл бұрын
Wastegate dumped to atmosphere, BOV chirping, it’s going to be a symphony of awesome!
@Russell_and_Rosko5 жыл бұрын
The turbo “whistle” becomes stupid loud once the surge ring is removed. It sounds like a jet. Run anti-lag if the new ecu supports it, this turbo will handle the abuse. Once everything is built and tuned, the parts are cheap enough to really be used hard. This is a great build man. I’m looking forward to seeing the dyno graph and what engine speeds you tune up to on the stock bottom. 🤘🏼
@BoostBrothersGarage5 жыл бұрын
Thanks dude! I’m anxious to see the progression as well!
@joczo974 жыл бұрын
Holsets are best,mercedes guys running these all over in europe. My friend has the hx40 on his om606,i have an hx30 on my 1.8 m111
@monikhushalpuri3 жыл бұрын
What rpm does it start making boost psi?
@joczo973 жыл бұрын
@@monikhushalpuri past 4000,I run 1.2bar on it. On basically all benz engines you want to have boost late,to avoid bending the rods
@Jonathan_Doe_5 жыл бұрын
Might wanna put a v band on your screamer pipe so you can clamp a little bike muffler on if needed, or have a capped off, v banded hole in the downpipe, and a little pipe to let you take the screamer off and feed it into the exhaust without much hassle. Not sure how it is in the states but a lot of tracks here have decibel limits, and screamer pipes tend to set the drive by decibel meters off like crazy!
@BoostBrothersGarage5 жыл бұрын
Absolutely! There are definitely tracks with DB limits. My two local tracks don’t seem to care, but it makes perfect sense to be prepared!
@clint.garage.6092 Жыл бұрын
VSRacing and FP…Robert from forced performance famous for dsm stuff and the creator of zonal rotor etc are both company’s making there own USA assembled budget Chinese import turbo parts right now and impressive is an understatement for the price range. Really like the vid am messing with a couple hx40 hw myself. Boost on bro.
@andrewesparza6713 жыл бұрын
I got mine in a garage sale for 20 bucks and it is a very good condition basically brand new the wife sold it to me
@BoostBrothersGarage3 жыл бұрын
What a steal!
@lorbau38227 ай бұрын
oh man i love holset got myself a brand new holest hx40 super with a #18 twin scroll housing for 500€, but it was 37% off on a swedish website
@laksflaks7 ай бұрын
Good mentioning hx35, it's literally the only Holset worth putting in a car for its value. Other than that one, go Garrett or BorgWarner all day.
@laksflaks7 ай бұрын
Remove the 12cm housing, get a 10 or a 8 housing for desired effect.
@jordanhanson2823 жыл бұрын
Bro this is a great video, well done 👏🏼
@BoostBrothersGarage3 жыл бұрын
Thanks!
@hereinmissoula114 жыл бұрын
Hx35 is great . Have a video of one I setup I did with dsm in my channel . My fav budget turbo is slightly more money . 580.00 borg Warner s366. Genuine . But I love hx35/hx40’s ! Great vid . Cool comparison coming . Subscribed !
@BoostBrothersGarage4 жыл бұрын
Yeah, that BW is a great deal! Thanks for the sub, I’ll check your channel out!
@hereinmissoula114 жыл бұрын
Boost Brothers Garage I just post vids mostly for customers to see when they are not around for startups or tunes. Also I would mention the little brothers the 363 and 360 are also inexpensive if the 366 is too big for a goal or desired spool. Friend getting parts together to replace old t3/t4 50 trim with s363 on 12v vr6 .
@Evilempire-dg8dz4 жыл бұрын
Boost Brothers Garage I have a question for you how would I delete the internal waste gate and change the exhaust housing on a holset he400vg I’m doing a budget build race truck and I got my hands on this turbo and don’t know what I can do with it
@BoostBrothersGarage4 жыл бұрын
Evilempire1131 I don’t know of any aftermarket exhaust housings for that turbo. Being variable geometry adds to the complexity as well. If it were me, I would be selling that turbo and getting something more traditional. A Borg Warner or Precision most likely due to power per dollar
@hereinmissoula114 жыл бұрын
Boost Brothers Garage if you do your comparison between this and gt35 you should include the s360 !! It’s under 600.00 and very comparable. Bigger turbine than all of these , probably slightly later spool but will go much farther and not lay off on top . :)
@1ounceTOKER4 жыл бұрын
what exhaust housing did you buy and where
@zmanphx3 жыл бұрын
I boost this with stock turbine housing to 40 psi on my 5.9 Cummins .
@BoostBrothersGarage3 жыл бұрын
That’s awesome!
@toad07205 жыл бұрын
Waiting for Dyno testing like a kid for Christmas.
@BoostBrothersGarage5 жыл бұрын
I NEED 5 CYLINDER NOISES!
@paublojaimes11285 жыл бұрын
Can’t wait to see how it goes! Will you guys offer a whole swap package? Will it be a limited production run?
@BoostBrothersGarage5 жыл бұрын
We will be offering an entire package! There are no plans to limit production. The more we can sell the more we can recoup all this investment lol
@tredfxman Жыл бұрын
@@BoostBrothersGarage So hey the Holset HX35 is just for Diesels right? Im driving GTI MK7 Clubsport that has the IHI IS38 from factory. What would be the best turbo swap with least turbo lag, early rpm, best durability. Hybrid is the way to go? What brands or other factors should i look for? Iv heard German TTE but their exp. Iwas thinking maby 450 hp max, and half the price of that TTE so maby 2000 usd for a kit?
@NugShrub6 ай бұрын
Been thinking about putting a hx30 on my 1.8T Avant. Also been thinking about putting a 07k in as well so we shall see what happens Chinese turbos are good for a fun 15k miles or so in my experience but my intercooler hates me.
@kerryL5 жыл бұрын
I can't wait to see how much power this packs with that 5cyl wail
@BoostBrothersGarage5 жыл бұрын
You and me both!
@jusmx1414 жыл бұрын
The H*Y*35 is the best-kept secret....same compressor wheel and airflow potential as a HX35 but comes from the factory with a single-scroll T3 turbine housing so there's no need to purchase anything additional except maybe a v-band adapter for the outlet ($25-$50 on eBay depending on the size needed); just weld the flapper shut and you're ready to go. Airflow-wise neither of these units are comparable to a GT3582R....that would be the HX40 instead. The HY35 you'll want is only found on 99-01 Cummins-powered Dodge trucks with an automatic trans.
@FullTimePRO4 жыл бұрын
Bingo, it's pretty rare to see anything over 500whp on these unless people start swapping out custom turbine wheel/shafts and/or compressor wheels etc.
@conancoulombe99273 жыл бұрын
Great information.
@stevemurch69744 жыл бұрын
12 cm turbine is a .76ar, youll also benefit from the twin scroll over the open, the comp wheel in your unit isnt rated that high, still love your approach to what Holset offer.
@inaNis_2 жыл бұрын
twin scrolls only work on odd cylinder engines, 5 cylinders can't benefit from twin scrolls the way 4 cylinders do
@stevemurch69742 жыл бұрын
@@inaNis_ first off thats not mentioned secondly twin scrolls have been used on both Audi and Volvo 5 cly, do your research sweet heart
@inaNis_2 жыл бұрын
@@stevemurch6974 Do you have a source for this? I'm just as interested in this as you seem to be.
@stevemurch69742 жыл бұрын
@@inaNis_ ive done it many times including running twin scroll housings on 3 Rotas, Google brings up examples
@dins.garage Жыл бұрын
@@stevemurch6974 the holset exhaust housings apparently don't flow as nicely as they should even being twin scroll.
@paulhoffman14815 жыл бұрын
where do you accumulate all this knowledge? I have a 944 I'm thinking of 07k swapping with some help this winter. I have been watching this series and have been fascinated by all your knowledge and tricks for a good affordable build Are you a mechanic by trade or just a hobbyest. Keep up the good work!
@BoostBrothersGarage5 жыл бұрын
Thanks Paul! I am not a mechanic, just love wrenching! I did go to UTI so I have some background knowledge there. A lot of this info is just me spending WAY too much time on KZfaq, forums and whatever other automotive content I can get my hands on. It’s a bit of an obsession haha.
@paulhoffman14815 жыл бұрын
Boost Brothers Garage that's awesome. what are your plans for the transmission when you put the turbo on? are you going to use a 968 transmission? I heard it's a perfect fit on a 944 and can handle 600 foot pounds of torque if you don't launch it
@BoostBrothersGarage5 жыл бұрын
I’ve got a turbo trans for when the NA trans blows. If I still have issues I’ll likely do an Audi 01E trans swap
@MrShoop-yj3gu2 жыл бұрын
I’ve got this turbo at home with me right now and I’m wondering should I be able to use this on my truck? It’s a 2011 GMC Sierra 5.3L V8 and idk if it would even work or what
@mushasho4 жыл бұрын
3582r is a 62mm compressor wheel... Thought Hx35 were 56mm
@mohammadasif9798 Жыл бұрын
Watching this video in 2022 and I'm about to go hx35 on my 1hdfte What's your thought about my plan boss??
@taco__supremee69644 жыл бұрын
Do you have a link to the turbine housing you used in this video? Having trouble finding it. Thanks in advance!
While I do agree holsets are the best budget turbos, 600hp is a bit of a stretch for the 8 blade hx35 you have. 500 is about max for the 8 blade. The 6 and 7 blades can flow enough air to support 600hp. Also, gt3582's are like a 700hp capable turbo, so they would be better compared to a 6 or 7 blade hx40, not an hx35.
@p0intdk5 жыл бұрын
i think full boost before 3500rpm and having 600hp on the same turbo is a bit optimistic
@BoostBrothersGarage5 жыл бұрын
“HX35- This is the best known and most common Holset on the tuning scene, and the equivalent to a GT3582R, with almost identical wheel sizes in fact. Spec for spec, same housing sizes, they actually seem to spool better- Have you seen a GT35 hit 25psi by 3500rpm on a 2ltr? I haven’t at least, but plenty of twin scroll HX35 setups have. There’s an insane amount of variations of HX35s, 650 plus at last count. There are compressor inducer diameter sizes down to about 50mm (I’ve heard of smaller, but no proof), which would lower its power potential, but the most common ones, and the ones to go for, are the 54mm inducer 7 blade compressor, and the 56mm 8 blade inducer, both proven at 600bhp. There are rare 6 blade versions too, which theoretically should flow more for any given inducer diameter, and billet versions too, but seen no data that they’re capable of more. Most have 82mm compressor exducer, but many later spec ones have a 76mm exducer, but it’s unlikely to affect peak power and seen no proof either way. There’s a wide variety of turbine housings out there, but the best known one in performance terms is the 12cm one, though I’ve seen 6cm undivided T4, 8cm and 10cm divided T3, and many more. Generally 11cm to 16cm housings suit the majority of applications, with 11-12cm best for 2.5ltr and smaller engines, and 14-16cm best for larger engines. The oddball small ones, 8cm, 10cm, are great for spool of course, but don’t expect to be getting 500bhp+ from them, partly as the turbine won’t flow as much, but also because they tend to come with smaller compressor wheels too. I’ve personally never seen a HX35 hit 600bhp on larger than 2ltr engines, but seen it on 2ltr and smaller engines many times, with the 4G63s in the USA hitting it most commonly, at 30-35psi. The most I’ve seen from 2.5-2.8s with HX35s is around 550bhp, and a little less on even larger engines. Spool-wise, a 12cm on a 2ltr with a twin scroll manifold is well proven to see 25psi+ by around 3500rpm, which is fantastic for a turbo of this size. Using a single scroll manifold and a 2ltr I’ve seen more like 1000rpm slower spool, 4500rpm, but still no lag between gearchanges, and some, just not ‘full’, boost long before then. On 2.5ltr engines, the 12cm housing even with a single scroll manifold tends to be full boost by around 3500rpm.”
@hereinmissoula114 жыл бұрын
I’ve spooled dsm 2.0’s at around 4000 so way possible
@jurgoSTI4 жыл бұрын
Boost Brothers Garage you just said something that really grabbed my attention. Why is it that 2L and smaller can make more hp than larger displacement engines with the HX35?
@bunkaaa87262 ай бұрын
I have a HX40 twin scroll t3 to go on my 1jz GTE, what do you recommend doing to get good spool on it?
@lorikeetspage78803 жыл бұрын
I will subscribe mate
@tuckerwalker67404 жыл бұрын
If its got 4 bolts then it sounds like a WH1C off the 94/95 cummins. Same thing as an hx35 just older
@BoostBrothersGarage4 жыл бұрын
Yep, although the H1C doesn’t flow quite as much air
@jusmx1414 жыл бұрын
The WH1C or "wastegated H1C" and ONLY the WH1C has a 56/83mm 8-blade compressor and surge-ported compressor housing...the same as the early HX35 units. Airflow and power potential is the same between the two, although the H1 series has a weaker thrust system so you're still better to use the HX35 for a performance application. The H1 series is easy to detect as they have a bolt-on seal plate like a T04 Garrett and the compressor housing attaches with a v-band as opposed to a snap ring on a HX unit. The NON-wastegated H1C's all have compressors 54mm and smaller and don't utilize a MWE groove on the cover so be careful what you buy as some folks will list an older H1C as a HX35 as their fitment can be identical but there's a huge difference in potential and high-boost durability.
@jacobpittsenbarger61502 жыл бұрын
On a 12 valve that silencer ring kills all the noise
@InBoostWeTrust7MGTE Жыл бұрын
did you ever make a dyno video to compare it to Garret? i couldn't find it in your channel
@SR20FTW4 жыл бұрын
VSRacing sells better turbos than CX. The owner Viren stands behind his products 100% and lives here stateside.
@hallenjunge5377 Жыл бұрын
Where did you install it? Is there already the video of comparision to GT35?
@jdmgarage1826 Жыл бұрын
Nice video, what do you think about put one hx50 in my 351w v8 ford
@TheBCninja3 жыл бұрын
Does anyone know if these diesel turbos are rated at lower turbine speed? That's the only thing I could think of besides the (addressed in the vid) extra big hot side.
@kevinjohnson93724 жыл бұрын
So what's your opinion on a power stroke turbo ? Road kill had a 7.3 turbo with a smaller banks exhaust housing and ran it on a stock 5liter ford and it seemed to be a real beast didnt have much lag
@MarekHR2 жыл бұрын
So this telling me... Buy 10 ebay turbos and sell it 3x more price and ppl will think hey... This is 1200$ turbo it should last better then 200$ ebay turbo.... Mann... Thanks for advice... Im ordering 3 turbos atm... Hope they sell fast for 1200$ each
@BoostBrothersGarage Жыл бұрын
Not sure how you got that from this video. My whole point was the HX35 can be bought / modified for $500 and is a better option than the Chinese turbos.
@rashamwilliams87824 жыл бұрын
Very nice. What turbine housing would you recomend for use on a 1JZ VVTI engine?
@BoostBrothersGarage4 жыл бұрын
That same .82 T3
@rashamwilliams87824 жыл бұрын
Thanks bro....
@nynoperales65212 жыл бұрын
Hey man. Have a question. I have a 1992 D350 Cummins and I want to do an upgrade on the turbo. What I need to make a 2nd gen HX35 fits my truck.
@markconcessio30542 жыл бұрын
Hi bro, which is a good turbo that will match my 4.2L Y60 Nissan Patrol petrol engine ?
@wayneclark3971 Жыл бұрын
What sort of spool rpm do you get with the 0.82 housing mate about to build a rb20 with a hx35 I have but want it to spool up good and get boost all the way up in the ramp going for around 450bhp do you think this size would be my best option thansk
@BigThomTattoos2 жыл бұрын
I'm thinking of using a Holset Hx35w turbo on my 5.9 Magnum build...Do you think this would be a good fit?
@c4r5on882 жыл бұрын
So is a hx30 similar to the gt30? And would be more suited to my 2.0 over the hx35?
@miguelmarrero70202 жыл бұрын
I just got one for $50.
@noeserrata75714 жыл бұрын
Question trying to do the same going to buy a smaller turbine housing for my garrett gt37....right now it has a A/R .65....what would your recommend. Going to add to a 4cy 1.4
@BoostBrothersGarage4 жыл бұрын
Man that’s not a lot of displacement. The GT37 is a big ass turbo (if that wasn’t a typo). You’d be a lot better off with something like the GT2052 or a factory takeoff VW 1.8t turbo
@ludwint7031 Жыл бұрын
What size wastegate do you use on the car?
@haydnpaull54473 жыл бұрын
What happened with the upcoming HX35 G25-660 comparison?
@BoostBrothersGarage3 жыл бұрын
Still happening! Just had a bunch of stuff get in the way.
@danielcraft72542 жыл бұрын
@@BoostBrothersGarage I'm looking forward to it as well
@djvicy4 жыл бұрын
Hey can you link up where to get this housing. And will it fit any Dodge cummins HX35 and HX35w ? Thanks
Now there gunna be hard to find over 46k people know the secret now haha
@BoostBrothersGarage3 жыл бұрын
Haha, luckily they made a silly amount of them
@ashton2k3923 жыл бұрын
do you know if this would work for a 08 tiburon 4cyl?
@BoostBrothersGarage3 жыл бұрын
It would, although something like a GT3071R might be better
@Manuqtix.Manuqtix2 жыл бұрын
Does it need to be .83 ar or can it be .63?
@Kaz73MGB3 жыл бұрын
Will the HX35W work as well? Is there a big difference between the two?
@BoostBrothersGarage3 жыл бұрын
The W just means it has an internal wastegate. That would not be an issue and would get thrown out with the factory turbine housing if you went the route that I did.
@alejandroochoa35414 жыл бұрын
@boostbrothersgarage would you recommend for a L6 4.0 (jeep) ?
@BoostBrothersGarage4 жыл бұрын
Should work well!
@eifeleisen62304 жыл бұрын
I have a Golf V6 2.8. Can the HX35 produce 600hp at the crank? or better the HX40?
@BoostBrothersGarage4 жыл бұрын
The HX35 should be able to make 600 crank. The HX40 will make more power, the 35 will have better response.
@yasjasim24874 жыл бұрын
I’m building a Volvo 242 5 cylinder with the same turbo, got it for a killer deal. What ecu are you running?
@BoostBrothersGarage4 жыл бұрын
Performance Electronics PE3-8400
@kevinxu31045 жыл бұрын
What transmission are u guys running with this turbo? I heard the 944 na transmission is not very strong.
@BoostBrothersGarage5 жыл бұрын
The NA trans is weak for sure. I’m leaving mine in to see how it holds up and what the breaking point really is. I have a turbo trans ready to bolt in, and will go with an O1E if the turbo trans let’s go
@kevinxu31045 жыл бұрын
@@BoostBrothersGarage I see, thanks for reply. I heard the 01e holds a lot lot of HP and torque stock. I really hope project nine can make the kit happen, I really need one for my 944 build. I'm planning to drop a lsa in, is making 727 to the wheels, the 01e would mean the world to me
@BoostBrothersGarage5 жыл бұрын
Holy crap, that’s going to be insane!
@drezee71734 жыл бұрын
Do you know if you can mix and match Garrett parts with Holsets?
@BoostBrothersGarage4 жыл бұрын
To my knowledge you cannot, but I am not an expert
@boostedhx19174 жыл бұрын
Can you send me the link for the housing? Cant seem to find one.
@BoostBrothersGarage4 жыл бұрын
Here you go! Turbo Lab America HX35 Turbine Housing www.amazon.com/dp/B07GZ3WVS5/ref=cm_sw_r_cp_api_i_DRyOEb0ATGETR
@legendary_perfomance3 жыл бұрын
Ebay 110 bucks shipped hx40
@ryanbarnes25194 жыл бұрын
I'm in UK and not got round to the turbo yet forged build AGU 1.8t now a 2008cc Stroker with tfis Crank etc etc would this be a good match for my engine thanks great info love ur vids
@BoostBrothersGarage4 жыл бұрын
Yes, I would think you could make 500+ and still have decent response. Thanks!
@ryanbarnes25194 жыл бұрын
@@BoostBrothersGarage thank you very much for ur advice keep safe bro 💖🔥
@dustinmoore35604 жыл бұрын
Do you know a link for the exhaust housing?
@BoostBrothersGarage4 жыл бұрын
amzn.to/3gtL7SG
@qwentinkappelmann34643 жыл бұрын
You know if this would work with the engine in an 06 rx8
@BoostBrothersGarage3 жыл бұрын
I would think so. You might want to find a bigger hot side for it though.
@kzz89713 жыл бұрын
@@BoostBrothersGarage I’m interested in using this type on my RX8 as well. What kind of hot side do you recommend?
@cruzy2519884 жыл бұрын
Can i get a link to that exhaust housing
@BoostBrothersGarage4 жыл бұрын
Turbo Lab America HX35 Turbine Housing www.amazon.com/dp/B07GZ3WVS5/ref=cm_sw_r_cp_api_i_CKKgEb70N8QPP
@downloadingutubes4 жыл бұрын
How much boost are you going to run with that turbo? Im thinkin of droppin one of these into an e30 at 8.70psi, im not sure if this is too big tho.
@BoostBrothersGarage4 жыл бұрын
I will likely run around 15-18? If you are wanting to stay at low boost you may look at a smaller turbo just for instantaneous boost. This would be a great fit for a small displacement inline 6 though.
@downloadingutubes4 жыл бұрын
@@BoostBrothersGarage ok awesome, what are some examples of smaller turbos that are good quality, ive been lookin at forums and havnt found any concrete answers. I guess i could get a smaller housing because im looking for around 0.6 ar ratio.
@BoostBrothersGarage4 жыл бұрын
Holders come with a variety of turbines housing sizes. Anything 12cm and smaller would be fine
@downloadingutubes4 жыл бұрын
@@BoostBrothersGarage thanks for the help bud appreciate it
@faizfauzi65004 жыл бұрын
Do u have link that turbine housing ?
@BoostBrothersGarage4 жыл бұрын
Turbo Lab America HX35 Turbine Housing www.amazon.com/dp/B07GZ3WVS5/ref=cm_sw_r_cp_api_i_zelVEb27SZCXB
@TheRowdyJ4 жыл бұрын
best for what? when rock crawling with a diesel, you want boost down low and its not needed at 3500 as much.
@1ounceTOKER4 жыл бұрын
can you post links
@BoostBrothersGarage4 жыл бұрын
Just posted the link on the last comment I got
@keithryan93145 жыл бұрын
Well Mike Holly fuck some bargain there look forward to seeing how you get on with it 👍🏻. Yeah the China turbos hard to know if you could trust them and risk making shit of your O7k 😵
@BoostBrothersGarage5 жыл бұрын
I’m all for cheap eBay stuff, but not when you can get high quality at the same price!
@JuhaEerikki4 жыл бұрын
Where are the Holsets made in? And are Aliexpress Holsets genuine or bad quality copies?
@BoostBrothersGarage4 жыл бұрын
Check this out: www.benzforce.com/blogs/news/is-that-a-holset-or-chinese-turbo
@ebeegeebeefofeebee31813 жыл бұрын
?
@ebeegeebeefofeebee31813 жыл бұрын
?
@AcheLone3 жыл бұрын
can i use any gt3582 turbine housing to hx35?
@BoostBrothersGarage3 жыл бұрын
Not that I am aware of. The link in the description of the video is your best option.
@AcheLone3 жыл бұрын
@@BoostBrothersGarage you got yourself a subscriber....wink
@BoostBrothersGarage3 жыл бұрын
Thanks!
@aimless-drifter4 жыл бұрын
so I heard this Turbo is too small for anything more than 3.0L
@BoostBrothersGarage4 жыл бұрын
Not entirely true, but for high boost / big power goals yes. You could run it on a larger engine and have instantaneous response, but it would run out of steam up top
@simonsaysr19944 жыл бұрын
dont be telling our secrets, haha. It is indeed the best budget turbo for sure, but by the time you make the manifold, downpipe, it gets very expensive.
@BoostBrothersGarage4 жыл бұрын
True, but that’s why I swapped to T3 housing! No more special BS!
@gagekhayat33733 жыл бұрын
Would you recommend for 2010 camaro ss?
@BoostBrothersGarage3 жыл бұрын
Would need to be two of them. Maybe look at the larger HX52
@gagekhayat33733 жыл бұрын
@@BoostBrothersGarage one Hx52?
@BoostBrothersGarage3 жыл бұрын
Yeah, they flow a ton
@TACOMASRT54 жыл бұрын
I have a supercharged 3.4L v6 I would like to add a turbo, I have an HT60 is it possible in any way shape or form to run this thing?
@BoostBrothersGarage4 жыл бұрын
You’re wanting to go twin charged or replace the SC?
@TACOMASRT54 жыл бұрын
@@BoostBrothersGarage twin....something different. Not after crazy HP NUMBERS just something unique
@BoostBrothersGarage4 жыл бұрын
Since the SC will take care of your low end you can be pretty aggressive with turbo sizing. However, the HT60 turbine housing is MASSIVE. The housing i use in this video will not work. An HX35 would probably be perfect since you aren’t searching for big numbers. Otherwise you could bump up to the HX40.
@TACOMASRT54 жыл бұрын
@@BoostBrothersGarage hoping to find a stock turbo off of something. Just dont know size engine to take one off of... 5.9,6.0,7.3...???
@BoostBrothersGarage4 жыл бұрын
I would just get on eBay and search that way. Turbine housing is what you need to pay attention to. You need 12cm most likely. Also, if you google it there are some really good Holset guides that help give you a better idea of which turbos fit which application.
@ramjet70895 жыл бұрын
Where did the exhaust housing come from?
@BoostBrothersGarage5 жыл бұрын
eBay... Just search for Holset Turbine Housing
@stefberkenbos8145 жыл бұрын
@@BoostBrothersGarage the ebay special
@BoostBrothersGarage5 жыл бұрын
I’m not proud! Lol
@joemeshulam55784 жыл бұрын
It’s the turbolab housing.
@MrSimpleJackism3 жыл бұрын
What oil feed fitting did you use for this turbo? I have the same turbo and want to adapt 4an fitting hose to the turbo.
@BoostBrothersGarage3 жыл бұрын
I haven’t installed it yet, but I believe you want something like this: www.stainlessdiesel.com/index.php?route=product/product&product_id=145
@kamalbrar61094 жыл бұрын
I have toyota 2l turbo engine with ct 20 turbo i want to upgrade need more pickup power.which turbo is good for future.
@sukhrajmaan21764 жыл бұрын
Is it good for desile 50 hp tactor 2950 cc
@BoostBrothersGarage4 жыл бұрын
I would think it would be too large for that application
@sukhrajmaan21764 жыл бұрын
Hx 25 would be suitable
@pohtoj13 жыл бұрын
So its best because its cheaper than your friends billet ballbearing garrett?