Why the new FLEX 24v Trim Router is so amazing

  Рет қаралды 24,682

Tool Review Zone

Tool Review Zone

Күн бұрын

Flex tools have been putting out one amazing tool after another, and this new Flex 24v Trim Router is no different.
Buy Here acmetools.pxf.io/ZQymKR
or here shrsl.com/452cf
Become a Toole Review Zone Channel Member for exclusive perks here / @toolreviewzone
FLEX 24V Trim Router SKU# FX4221-Z
THE FLEX ADVANTAGE - 20% more power with 24V lithium, 25% longer runtime with THERMA-TECH™ heat management, up to 50% faster charging with high-power, dual fan chargers (battery and charger sold separately)
SPINDLE STOP™ - Patent-pending shaft lock system for fast, easy bit changes and preventing inadvertent startups
BEST-IN-CLASS RUNTIME - Average runtime of 275 feet per charge with 5.0Ah battery (tested on red oak with 3/8-inch roundover bit, battery and charger sold separately)
1.5 MAX HORSEPOWER BRUSHLESS MOTOR - Intelligent sensor-free brushless motor designed to eliminate friction and optimized for higher efficiency and power under the toughest applications
ACCURATE DEPTH ADJUSTMENT - Quick-release collars deliver easy and reliable depth adjustment to 1/64 inch
QUICK-ADJUST EDGE GUIDE - Allows convenient parallel cuts along a straight edge
VARIABLE SPEED DIAL - Six settings from 16,000 to 31,000 RPM
FLEX FOUNDERS LIMITED LIFETIME WARRANTY - Register your new FLEX tool, battery, or charger within 30 days of purchase through December 31, 2023 to receive a limited lifetime warranty
FLEX 24V CROSS-COMPATIBILITY - Compatible with all FLEX 24V batteries, chargers, and tools
#flextools‪@flexpowertoolsnorthamerica728‬ #trimrouter

Пікірлер: 46
@BreakingElegance
@BreakingElegance Жыл бұрын
Hey you ruined my pickanic table
@ToolReviewZone
@ToolReviewZone Жыл бұрын
Sorry bout that 😪😆
@ryobiguydiy
@ryobiguydiy Жыл бұрын
From the on/off switch to the fence and the spindle lock. That’s one of the dopest battery powered routers out.
@AB-nu5we
@AB-nu5we Жыл бұрын
As noted by other commenters, the centering mandrel is used for PC guide bushings. However, in this case, I think Flex included it because they provide two bases and you need the mandrel to change bases (as you noted). It's nice that it comes with the router as the few that I have, I had to purchase separately. Also, cool new juice groove in the picnic table. Every family that has kids should add that juice groove to their picnic table. ;-)
@timothystevenhoward
@timothystevenhoward Жыл бұрын
I think this might be my first router. I love all the features.
@heystarfish100
@heystarfish100 Жыл бұрын
The top looking device is a router bit centering cone for use of centering the baseplate to work with Porter Cable guide bushings. It looks like a super great choice of cordless router if you’re in the market for one.
@stephenleepmg113
@stephenleepmg113 Жыл бұрын
I like it !!!! Only thing I would change is the base. In my opinion I think it should be made of metal not plastic, because metal will last longer.
@Griffinwoodworks
@Griffinwoodworks Жыл бұрын
The Dewalt/Porter Cable adjustment ring should just be the industry standard, no question. All manufacturers need at least some iteration of it. Real nass review bro, I’ve been waiting on this one. Routers are like crack to me. 😂
@willng34
@willng34 Жыл бұрын
makita system is not as precise but much easier and faster to set
@zero_cool817
@zero_cool817 3 ай бұрын
I saw one at Lowe’s and came to check out some reviews. Now I need it.
@TOOL_TECHNICAL
@TOOL_TECHNICAL 8 күн бұрын
did you ever get it? you can get it free (or pick from a list of 24V flex tools) if you buy a charger and 3.5 ah stacked battery for 199 at lowes
@TheRealMrGordons
@TheRealMrGordons Жыл бұрын
I hope this becomes the standard style for all of them. From what I could see this was designed from the ground up to contain the best ergonomics possible above all else and omg it looks like a pleasure to use. If I didn't have a makita one already (and if flex was available here) I would definitely want this one
@stevejebb7896
@stevejebb7896 Жыл бұрын
Nice piece of kit. Soooo easy to use. Good one bud. Santa gonna have one more item to weigh him dowm 👌
@thechase-secondchance5077
@thechase-secondchance5077 Жыл бұрын
I knew this was coming out but I needed a router before this hit the market so I picked up a Ridgid, which works really well. I think the deal was buy two battery pack and get a free tool so I took the Ridgid router. And, though it works really well, I can see myself picking up this Flex router. It looks amazing and I have 7 other Flex tools and batteries
@almostasian903
@almostasian903 7 ай бұрын
I've been waiting for a good "free tool" deal that offered a router. Finally, I found a FLEX offer at ACME tools!
@whatthehellimbored
@whatthehellimbored Жыл бұрын
The centering cone is a standard item for routers
@jamallaidley4718
@jamallaidley4718 Жыл бұрын
That's cool Clint 😎
@kerrywillis1114
@kerrywillis1114 Жыл бұрын
I have a flex assortment, but I need the sander and router!!! Real nass like
@HyPex808-2
@HyPex808-2 11 ай бұрын
can you do plunge cuts with that?
@247Combat
@247Combat 8 ай бұрын
@toolreviewzone how are u liking this router compared to that new milwaukee 1/2 plunge router?
@treebossmike8818
@treebossmike8818 Жыл бұрын
Clint bro how the hell are ya?!? I would love to see you check out the Metabo HPT 36v brushless plunge router. Power for days, and only 1/2” cordless plunge router as of now (Milwaukee coming out with one soon). Also the Makita 40v XGT router is very impressive as well. Im still not entirely sold on Flex yet but i think they are finally understanding there is more to tools than just power!
@Fictitious_Character
@Fictitious_Character Жыл бұрын
Looks good. I'm now more alarmed that Home Depot is selling me crackless fake DeAblo's.
@ToolReviewZone
@ToolReviewZone Жыл бұрын
🤣🤣🤣 yeah, need to watch put for that 👊👊👊
@TOOL_TECHNICAL
@TOOL_TECHNICAL 7 күн бұрын
not sure if you answer comments on older vids but I just bought one of these (2024 is the last year of lifetime warranty for flex purchases). Did you notice the highest speed being painfully loud? I put in a 1 notch left 3.5 ah stacked battery and it's painfully loud on speed 6 while a fully charged 3.5 sounds normal like yours. I doubt I have a defective one but haven't seen anything about a "noise letting you know the battery is low". The tool is beautiful but a bit hefty. just curious about that noise that makes me wanna plug my ears. To be clear, I pulled it out of the box and ran it without a router bit in
@JackKirbyFan
@JackKirbyFan Жыл бұрын
I am even more excited about it. Ordered it from ACME and cannot wait to use it. My old DEwalt can go away. That router was a lousy trim router. THis one looks like it's built to last.
@jpramos5959
@jpramos5959 8 ай бұрын
You're so entertaining Bro.
@ToolReviewZone
@ToolReviewZone 8 ай бұрын
Thanks brother 👊
@FJBsaidcornpop
@FJBsaidcornpop 9 ай бұрын
My DeWalt oscillator is almost identical to my craftsman oscillator
@eyeofamon
@eyeofamon Жыл бұрын
I have been a Flex fanboy for two years now, but they clearly copied the DeWalt depth adjustment (the best style of depth adjustment). I hope they didn't infringe on any patents. Get one quick, everybody, is all I'm sayin'. 😅
@easy64livin
@easy64livin Жыл бұрын
😂 you're funny brother
@Jeremy-uf6qs
@Jeremy-uf6qs 6 ай бұрын
My OCD is gonna flair up 😂 Real nass like!!!
@BreakingElegance
@BreakingElegance Жыл бұрын
Ooohhh. Hoooooo hoooooo hoo 15 howas of top spin failure action REAL NAS LiKE!!!
@09FLTRMM77
@09FLTRMM77 Жыл бұрын
MM77 Approved 👍🏼👍🏼
@peterlaughlin930
@peterlaughlin930 Жыл бұрын
Smeeshed but I already have three routers Nice video though real naz like
@ToolReviewZone
@ToolReviewZone Жыл бұрын
Brotha man Peter 👊👊👊
@txvet7738
@txvet7738 Жыл бұрын
Man she screams…lol! That’s real nas like!
@paulshelley3770
@paulshelley3770 Жыл бұрын
I think if other tool companies don't start following suit of what other tool companies are doing that one of them's going to supremely dominate like the fact that this router comes with all the accessories. What kind of shit is that? When you have to buy it a trim guide separate it should come with it that's bullshit
@lthegr81
@lthegr81 Жыл бұрын
I'm first and that's real nicelike 😅
@ToolReviewZone
@ToolReviewZone Жыл бұрын
Definitely real nass like 81!!!!!
@brucemitchell5637
@brucemitchell5637 Жыл бұрын
Nope, I'm first!
@almostasian903
@almostasian903 7 ай бұрын
Nope, but I have one on it's way!
@steelvalleysportsmen7737
@steelvalleysportsmen7737 Жыл бұрын
So all routers look like routers, but makita routers look like makita routers. Come to think of it bosch routers look like bosch routers, and dewalt routers look like dewalt routers. That there flex is a gray dewalt router, my friend lol.
@lbrastaman
@lbrastaman Жыл бұрын
Dee-ablo 😂
Why the new FLEX Miter Saw is way better than you first thought
13:11
Tool Review Zone
Рет қаралды 10 М.
Flex Tools (THIS IS COMPLETELY UNACCEPTABLE)  What were they thinking?
8:24
Alex hid in the closet #shorts
00:14
Mihdens
Рет қаралды 19 МЛН
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 23 МЛН
Which Compact Router Should You Buy? - Toolsday Woodworking Tool Reviews
17:08
Jonathan Katz-Moses
Рет қаралды 773 М.
Milwaukee Tools You Probably Never Seen Before
27:10
Top Tech Tools
Рет қаралды 478 М.
FLEX FX4221 24V Cordless Trim Router Review
23:49
Shop Tool Reviews
Рет қаралды 4,9 М.
Flex Powertools SEMA 2023
14:23
Mike La Putt
Рет қаралды 11 М.
How to Use Every Dremel Bit
20:02
Log's Carving Club
Рет қаралды 500 М.
Damascus Steel From Milling Chips!
15:47
Alec Steele
Рет қаралды 1,4 МЛН
Tools I wish I bought years ago: My toolkit v2
18:05
Todd Parker
Рет қаралды 716 М.
3D Print Tools Instead of Buying Them
22:30
Alexandre Chappel
Рет қаралды 125 М.
Power Tools with Flex 24V Adapter!
17:17
VCG Construction
Рет қаралды 11 М.
Alex hid in the closet #shorts
00:14
Mihdens
Рет қаралды 19 МЛН