Brian Brazeal demonstrates and explains why a rounding hammer is the most versatile hammer to forge with. FOLLOW ME ON INSTAGRAM: / brianbrazealblacksmith
Пікірлер: 212
@bags46497 жыл бұрын
Good to see that Alec is staying true to your teaching, and refers to his time with you a lot... Good teacher is what that means, and a lot of impact in a young mans life... Gratz
@deanrantz11124 жыл бұрын
Oh it's Copper...I was wondering how you were able to Hammer it cold so long ...DUH ;)
@BrianBrazealBlacksmith10 жыл бұрын
Thanks Travis. I made that hammer, and I do have classes where people make their own hammers, but there are also some former students that are now making hammers for sale like Arron Cergol and dave Custer. If you live in Europe, Alec Steele, Julien Puy, or Daniel Lea could also make you one.
@oscarduck19207 жыл бұрын
Alec Steele 'recording' at the start :-)
@trampmaster137 жыл бұрын
Oscar Duck thought so!
@muledeerdude5 жыл бұрын
I think it is
@insertphrasehere154 жыл бұрын
Doesn't sound like him.
@jsarmoury59114 жыл бұрын
Wow is that Alec? Indeed sounds like him, but serious? XD
@bochapman10583 жыл бұрын
are you sure? It didn't sound like him to me. there are other videos where the cameraman talks and it is definitely not Alec.
@BrianBrazealBlacksmith11 жыл бұрын
Brian makes hammers for those who ask but prefers you take a class with him to learn to forge tools for yourself. Class is $250. a day (including room and board), a hammer 3 1/2 and under is also $250 and can be finished in class along with a hot cut, in less than a day. It is a better value to get tools and forging info with Brian.
@harveyharrison384011 ай бұрын
i love the fact that alec steele is the cameraman here
@schattenvolkofficial11212 жыл бұрын
THANK YOU! I was lost in a rabbit hole of writing research about forging hammers ... you just made my evening, sir! I wasn't wrong with my first approach, YES! 💪🏻🤩
@michaelclark28406 жыл бұрын
That was very informative. Thankyou for sharing your knowledge.
@mitchelperkins67239 жыл бұрын
Great informative video Brian. I just got back from my machinest friends house. I had forged my first 4# rounding hammer from 2" od 4140. We Rockwell tested it then did the actual hardening and temper in his heat treat oven. It finished up at 50c hardness. I live in Central Alabama about a 2 hour drive from you. Hopefully I can manage to scrape together the dollars for a 5 day class late summer 2016.Those hammer tongs are tricky to forge but I managed a set that work ok for the lighter stuff. Now it's time to do a beefier pair for the larger hammers. Thanks so much for posting the videos as they have been a great asset for a newbie to the art. I'm 55 and have been a metal fabricator for over 30 of those years. When my dad asked what got me into 'smithing I told him it was a natural "progression back to the old ways". He's 86 and got a real laugh from that statement.Looking forward to learning from a master..... Hopefully.
@perrythomasson6311 жыл бұрын
Superb video as always. Probably your best demo of the two sided taper. Great explanation of the rounding hammer dies.
@WigsWonkyForge7 ай бұрын
The magic of hammer direction. Mind blown.
@BrianBrazealBlacksmith8 жыл бұрын
I've been showing people how to make them for a few years now, so you can get one from several people around the world. just do a search on hammers.
@BigWillSD7 жыл бұрын
great tutorial! I love my squashed ball the Mrs got me for Christmas, this definitely helps understand the parameters of its full potential. thank you
@samparkin629810 жыл бұрын
Even though you explained to me in person, I loved the video. Looking forward to seeing you soon. Thanks Brian.
@adambeyl2 жыл бұрын
Master at work. So inspiring
@larryfetters2126 жыл бұрын
Learned lots thanks
@GarysBBQSupplies6 жыл бұрын
Pretty amazing hammer work!
@stevengunter34573 жыл бұрын
that is just simple just amazing to watch
@lenblacksmith85596 жыл бұрын
Love that, and thanks Brian for a great informative video on the rounding hammer.
@BrianBrazealBlacksmith6 жыл бұрын
Lenblacksmith you're welcome.
@lenblacksmith85596 жыл бұрын
Brian, are you still making these and selling them?
@jdog334411 жыл бұрын
i just got back from a hammer in and one of the guys had one of your rounding hammers and i got to use it and i loved it moved metal so fast and smooth looked like i was using a power hammer :-) i want one!!!!
@JGanvil11 жыл бұрын
Hey Brian Great job on explaining the benefits of a rounding hammer. I enjoyed watching you and the Young Smiths in Rapid City SD. I posted a short clip of them striking.
@raymondraptorclaw2901 Жыл бұрын
As a novice, all these hammers look so similar until you see them in action. With my favorite cross-peen, I wouldn’t have been able to hit that metal once it stopped glowing. Also the rounded face is perfect for putting a real dent in what your trying to taper.
@petergrassel39736 жыл бұрын
Brian you rock
@BrianBrazealBlacksmith10 жыл бұрын
You're welcome, Sam. I've got some copper, too, that I'll give you to play with. I've learned more about forging with copper and silver doing small things than all the other bigger stuff I've ever done.
@Makedomakefit6 жыл бұрын
awesome stuff
@gateway88338 жыл бұрын
thank you for the learn'en, I will certainly get me a hammer like this one.
@kensmapleleafretirement4 жыл бұрын
Thank you for the video instruction. I just bought a rounding hammer and I am trying to get the most out of it. This video will help... Thanks ...
@BrianBrazealBlacksmith4 жыл бұрын
Glad to hear that.
@dragonwaterforge6 жыл бұрын
Love this video
@BrianBrazealBlacksmith11 жыл бұрын
Thanks Joe
@BrianBrazealBlacksmith11 жыл бұрын
Thank you. I am forging copper in this video.
@terrahawk200310 жыл бұрын
you are a God! Thank you much for the vid
@MrJsowa11 жыл бұрын
that was a great video,you just saved me so much experimenting!so far ive re-dressed my 2 crosspeins with very rounded faces and man my heats last nearly twice as long,or at least i get twice the forging done.but i never wouldve thought of that in your rounding hammer you have hearly every die(useful dies anyway).its like a rack full of hammers in one. HMMM i just got a small flat bar of copper,looks like im gonna make some copper flowers and leaves! :o)
@FerrariaExclusiva11 жыл бұрын
Nice!!! very nice!
@mortarsquad1210 жыл бұрын
Keep teaching please! I'll be coming out on a scholarship next year :D
@BrianBrazealBlacksmith11 жыл бұрын
That is a Henry Wright anvil forged of wrought iron with a steel face plate forge welded on top.
@BrianBrazealBlacksmith10 жыл бұрын
I use different lengths and widths for different weights of hammers. For most of my smaller hand work I'd use my 3 2/3 pound hammer, and I make that from 2 inch round by 4 1/2 inches long. I will end up with a 3 3/4 pound hammer when I direct a billet of that size. I'd've seen some end up with less than 3 1/2 pounds. If you forge to finish and don't take too many heats you'll lose less than 1/4 pound in the end.
@rurouniyamabushi11 жыл бұрын
Thanks !
@jrbuck28443 жыл бұрын
Yes It is Alec
@Meadwolf8611 жыл бұрын
Great informative video and even better hammer control! Now I want one of those hammers, but I dont think it would be right owning one and not learning how to use it correctly from the man who makes them! Anyway, thanks for putting this video up!
@rurouniyamabushi11 жыл бұрын
Professional explanation! by the way,may I know the weight of that lovely hammer sir? thanks and appreciate it.
@MarianoMiguel10 жыл бұрын
Hola. Le hago una consulta, ¿es hierro el material de la varilla? Parece ser demasiado dúctil. Saludos
@ontimepaul11 жыл бұрын
Mr Brazeal, I am amazed how you continue to work the metal cold. It seems to move so easily. it seems to planish nicely to. I assume it is soft iron?
@einarekholm45074 жыл бұрын
Paul Shiflet it’s copper man
@BrianBrazealBlacksmith10 жыл бұрын
My anvil is mounted to its stand and the stand is mounted to a concrete slab. It rings like a bell if it was just sitting there. Just like a tuning fork, if you grab onto it, it will stop ringing.
@lesrap10 жыл бұрын
that makes too much since. thank you, I'm just starting, with a railroad track and a ballpein. my neighbors havent said anything yet ...
@dr109610 жыл бұрын
I love my hammers. Really glad i made them with Brian Brazeal
@me3a2ad10 жыл бұрын
Hey, ummm, i know this is stupid, but where do you get a real anvil?
@Uatemysoul10 жыл бұрын
Nadeem Kablawi I got lucky and talked to a few people and one person had one hanging around their garage and they said I could have it. I am now the proud owner of a rather quite wrought iron anvil that is about 100 or so years old. I also live in a rural area so that helps if you don't live in a place like that you can get a real anvil online made to order they are crazy money. You can also try antique stores many have them but they tend to not be around very long they are getting rare as blacksmiths buy them up.
@calehane9 жыл бұрын
Nadeem Kablawi Its funny that you should ask.... the thing is: you spend a lot of time and mony to get your first anvil and sas soon as you dont need any more they just keep coming to you.... look in old workshops, on scrapyards and in your neighbors front yard (used as decoration)
@TalRohan10 ай бұрын
I just noticed that the hammer strikes are making a rose pattern on the leaf
@Marshallvs8010 жыл бұрын
What length and diameter of 1045 do you start with in making the rounding hammer. I have two bits of 1045 both are 2 1/8" diameter. One is 5" long the other is 12" long.
@Flyguy7797 жыл бұрын
wish i had such a sturdy and well mounted anvil ... looks like you get almost no shock absorption from it
@katyuuki22619 жыл бұрын
This is a really cool video! Thank you so much!! Where could I get hands on learning?
@BrianBrazealBlacksmith9 жыл бұрын
Brian's class schedule is full through July 2015 and I do not want to book too far into the future. I will know more about future classes and scheduling hopefully in May 2015 and ask that you re-contact us then. Thanks, Karen
@BrianBrazealBlacksmith9 жыл бұрын
I teach classes and so does Lyle Wynn here in the states. Alec Steele teaches in the UK.
@usaisalwaysnumber19 жыл бұрын
Brian Brazeal want to purchase one of those beautiful rounding hammers if I can afford it.please send price and how to get one..
@jessenen4 жыл бұрын
@@usaisalwaysnumber1 buy a sledge go at it with an angle grinder slowly as to not get it wrong
@rustybow7293 Жыл бұрын
This is great. I have to get a rounding hammer now. Thanks for posting this video.
@BrianBrazealBlacksmith10 ай бұрын
Any time!
@OsmiumBuckshot8 жыл бұрын
Randomly came across this video, will check out your others so excuse me if you have already remedied this, but have your cameraman manual focus.
@FlyingJJD8 жыл бұрын
Is a 3.5 pound a good size as an all around for someone just getting into blacksmithing? Great video by the way!
@BrianBrazealBlacksmith8 жыл бұрын
that's what I'd recommend.
@FlyingJJD8 жыл бұрын
+Brian Brazeal thanks! Any chance you have one available for sale?
@BrianBrazealBlacksmith8 жыл бұрын
+FlyingJJD no but I can make one. I charge $300 for hammers, but several of my former students make them and charge considerably less.
@bobbypoling580710 жыл бұрын
Brian where can I get one of yours hammer at
@keyehek17907 жыл бұрын
most blacksmiths forging rounding hammers use some kind of dishing/ cupping tool to forge the round side of the rounding hammer. is there any other way to forge the round face consitantly without a cupping tool designed to do so?
@SuperJinsoku7 жыл бұрын
angle grinder, and a couple high grit flapper wheels
@coreyshier75268 жыл бұрын
I like this video and the leaf you made. Could you have possibly turned that into a Clover Leaf? At least a 3 or 4 Leaf Clover leaf??
@BrianBrazealBlacksmith8 жыл бұрын
I'd do a clover leaf a bit differently, but I'd isolate the stem similarly.
@coreyshier75268 жыл бұрын
+Brian Brazeal I'd like to see how you do one of those. Watching this video I got the idea of making 4-Leaf Clovers in Copper, clean them up a bit then let them naturally tarnish green, seal them in a clear coat lacquer. And sell them on St Patrick's Day.
@paulmoskevitz54187 жыл бұрын
Great teacher! I really enjoy how you explain the steps! Ask your camera man to try and keep your videos focused !! Haha!
@burntferidgerator68485 жыл бұрын
His cameraman is alec Steele whom has his own blacksmithing channel, he is not part of this channel anymore
@sammidwood4044 жыл бұрын
Holy cold hammering
@BrianBrazealBlacksmith4 жыл бұрын
This is copper.
@blacksmithmoose11 жыл бұрын
Where can I get one of those hammers?
@retkulibin03039 жыл бұрын
Super!
@AlecSteele11 жыл бұрын
That hammer is 5 pounds!
@BigCyaPlug6 жыл бұрын
Love that you did a remake of this video.
@swankscabinet16253 жыл бұрын
Golly that’s a big one. I usually swing a 3lb maybe 3.5 if I’m feeling good. But man that’s insane to me. What about you Alec, what size do you usually swing at your workshop(s)?
@garethbaus54712 жыл бұрын
@@swankscabinet1625 I once tried a 10 pound hammer once in college, it slowed my swings enough that I was better off with a lighter hammer.
@damoking94718 жыл бұрын
Where can I get one?
@cre8tivesolutions6 жыл бұрын
Brian, any rounding flat hammers for sale? Just starting out.
@TheSatyrblue6 жыл бұрын
Edward Barron check with Alex Steele. One of Brian's students that has them for sale sometimes. He has an awesome channel as well.
@cre8tivesolutions6 жыл бұрын
TheSatyrblue I've been following Alex for awhile now, none for sale. I'll keep looking.
@get62311 жыл бұрын
What is your anvil made of
@stenzeliron681810 жыл бұрын
I need help on purchasing a rounding hammer. Where? Weight? Good brand?
@BrianBrazealBlacksmith10 жыл бұрын
Hi Eric, Brian hand forged his rounding hammer. He prefers to teach others how to forge their own tools but will forge hammers and tools for those who ask. You can however get one faster and less expensive from Brian's student, Dave Custer. Dave could also help you decide on size. facebook.com/dave.custer.169?fref=ts
@kentgordner71197 жыл бұрын
Hello. I have 1 1/4 stainless steel rod. Is it possible to use this for hammers? And are they any good?
@leviblackwood32587 жыл бұрын
Kent Gordner what kind of steel is it?
@leviblackwood32587 жыл бұрын
Kent Gordner ( assuming you have all the other blacksmithing tools) you can buy 1045 steel rods off of ebay for a decent price
@ubiquidic98238 жыл бұрын
Hello Brian is that steel extremely soft or am i mistaken but how do you move so much of it when its cold?
@BrianBrazealBlacksmith8 жыл бұрын
a lot of people have made the same comment. watch it again all the way to the very end, and pay better attention. you'll see how and why it is possible. you may want to give it a try some day.
@ubiquidic98238 жыл бұрын
+Brian Brazeal Thank you for the response I see so copper can be forged even at a black heat?
@BrianBrazealBlacksmith8 жыл бұрын
+William Laidlaww yes, and for a very long time if you don't bear on to large of surfaces, and you can slow down and actually see the results of each hit because it is not glowing. just don't overheat it, don't go past bright red or it will be melted and end up in the bottom of your fire pot.
@ubiquidic98238 жыл бұрын
Okay thank you for this response where would i get copper bar?
@BrianBrazealBlacksmith8 жыл бұрын
+William Laidlaww at metal supply places that carry copper or order it from Ryerson's.
@joncooper23618 жыл бұрын
what is the dimensions of the rounded side i am trying to get my hammer rounded enough but i dont know what degree of a dome a normal rounding hammer has can you give me a ball park figure if possible
@BrianBrazealBlacksmith8 жыл бұрын
It is more like a squashed ball. the ball fuller that made the ball swage that makes the round side of the hammers was made with the shallow dish on a swage block I got from Centaur a long time ago.
@lordfeish19272 жыл бұрын
I was ery concerned that he was forging it that cold until he said it was copper
@mattcoblentz7411 жыл бұрын
Where are you located?
@lesrap10 жыл бұрын
why dose your hammer and anvil make a "thunk" sound?
@mattbehnke7798 жыл бұрын
Do you make and sell rounding hammers? If so I would love to buy one! Thanks
@BrianBrazealBlacksmith8 жыл бұрын
I will if anyone asks. I used to teach others to make them, so there are several people out there that make and sell them as part of their business.
@BrianBrazealBlacksmith8 жыл бұрын
I will if anyone asks. I used to teach others to make them, so there are several people out there that make and sell them as part of their business.
@BrianBrazealBlacksmith8 жыл бұрын
I will if anyone asks. I used to teach others to make them, so there are several people out there that make and sell them as part of their business.
@BrianBrazealBlacksmith8 жыл бұрын
I will if anyone asks. I used to teach others to make them, so there are several people out there that make and sell them as part of their business.
@mattbehnke7798 жыл бұрын
+Brian Brazeal How much would it cost for you to mkae a 2.5 pound one? Thanks
@user-pf2hv8qw1s6 жыл бұрын
I'm getting a rounding hammer.
@MrAbrink10 жыл бұрын
did you make your hammer? where can i buy a starter set?
@BrianBrazealBlacksmith10 жыл бұрын
come take a tool class :)
@nikolaimarquardt489510 жыл бұрын
Brian Brazeal I got three questions for you.. When? Where? And how expensive are your classes?
@BrianBrazealBlacksmith10 жыл бұрын
Nikolai Marquardt Tools to make tools: learning to make, use and maintain your own tools The goal of this class is to enable other to go away with the basic tools to do this course and share it with others. Anyone that wants to forge would benefit from this class. The results of this class can be seen in the world with those that have been here and shared what they learned, especially with the Young Smiths and the farriers. This class can be completed in 5 days, so that is the minimum time that it is offered. The longer the stay, though, the more one can get out of it. The first day begins with forging a hot cut hardy with me directing and the student striking, and then a rounding hammer. This has always been completed before lunch. While the hammer is cooling, we will go through the forging of hand punches, fullers, and chisels. Once the hammer is cooled I will go through the basics of grinding the hammer and hardy. The student can continue forging the hand tools while I finish the grinding. We harden and temper the hammer next, then we handle it. Now you can use your hammer and hot cut. After some punches, fullers, and or chisel are forged and ground we will harden, temper and go through the use of them. Next we go on to make the tools that made the hammer and hot cut. We start with the hammer eye punch. I do this step by step. I cut off an appropriate piece of round stock and we forge an oval billet and punch the hole, then you do the same. I direct the next step, then you do the same. We alternate step by step until the punches are finished with the forging. Then we grind and handle them to use them for the next tools which will be the top fullers that made the hammer. I direct the first fuller all the way through, then you direct the next one. We grind and handle them. Now we forge the bottom tools that made the hammer. I show the first fuller, then you do the other. Next we forge the cupping tool with two strikers. Next we forge the hump tools that act as bolsters for forging the hammer and top tools when needed. These tools get ground when cooled. The tongs that were used to forge the hammer and top tools are next, and finally the drift. These are the basic tool used to make the tools that can be made in the course of five days. Other tools can also be made that were used to make the tools like a set hammer, flatter, large ball fuller, bottom swages, top hot cut, and top side cut. More hammers and top and bottom tools can be made with these tools, and it is up to the individual what to choose next. This course is one on one and shows how to "forge to finish", use and maintain your tools, and it is up to the individual to avail themselves to it. Room and board are included. You should be able to go home with more value in tools than it cost for the class and knowledge to share this with others. Private (1 person) Class - “Tools to make Tools" This is one on one instruction with Brian Brazeal at our place in Brandon Mississippi, for 5 or 7 days ( or more). It is designed to improve your forging skills whether you are a blacksmith, farrier or knife maker. The class concentrates on forging techniques that move metal and the "elements of forging" while you forge the tools you need. Longer classes provide more time to work on more techniques like forge welding, jewelry, collaring etc. Class cost per person is: 5 day 1250., 7 days 1750. Including all meals and a place to lay your head at night. (there are motels nearby if you prefer) You bring your safety gear and know the size of your hardy hole. It is helpful if you watch Brian's videos before you arrive. kzfaq.info?feature=guide No experience required for classes, email Karen for scheduling at brianbrazealblacksmith@gmail.com The price is all inclusive with the exception of specialty foods or drinks- sodas, beer/wine etc.. We have a modest home and students stay in our spare room, I make 3 meals a day and you work with Brian in the shop all day. I pick up and deliver to the airport and do laundry so you can pack light. You just forge and we take care of the rest.
@bstevermer92937 жыл бұрын
What is the radius of the squashed ball? Perhaps 2"
@BrianBrazealBlacksmith7 жыл бұрын
B Stevermer There are many different radii. The center is way bigger than a basketball, and the edge is alot smaller than a dime.
@TheIlliniviking8 жыл бұрын
Hi there, how heavy is this rounding hammer you forged?
@BrianBrazealBlacksmith8 жыл бұрын
3.66 pounds
@TheIlliniviking8 жыл бұрын
+Brian Brazeal thanks a bunch!!
@BrianBrazealBlacksmith8 жыл бұрын
+TheIlliniviking you're welcome.
@leviblackwood32586 жыл бұрын
looks like your forging that cold, now that's some real strength.
@BrianBrazealBlacksmith6 жыл бұрын
Levi Blackwood that is copper.
@he-mansuncle76616 жыл бұрын
Brian Brazeal good size piece of copper! Do you teach a lot with copper since you can keep forging it at much lower temperatures! Awesome video
@BrianBrazealBlacksmith6 жыл бұрын
Phillip Taylor I've learned a lot about forging by forging copper, silver, and aluminum. You can easily see every hit while you are forging. I do incourage others to try it and see for themselves. Ask Alec Steele and Lyle Wynn if it helped them.
@he-mansuncle76616 жыл бұрын
Brian Brazeal I know its helped them! Your series of clay demonstrations was amazing. I wish I could give it a go but can't.
@he-mansuncle76616 жыл бұрын
Brian Brazeal I do have a question about the rebound of an anvil. The entire ball bearing bounce back test and what does it really mean? A blacksmith/KZfaqr did a video about the subject and went on about why the rebound doesn't really make a difference. I was really curious about what your take on this is! I believe the channel is purgatoryironworks , if you want to hear what he says. He makes a lot of videos that are against the grain of age old blacksmith beliefs. They're basically a bunch of videos that are him liking to hear himself talk and tell everyone how "smart" he is. He may be a great blacksmith that knows a bunch but in the words of a student of yours, *Alec Steele* needs less "Yack Yack and more Wack Wack"!!! Back to watching your videos again :)
@dragonwaterforge6 жыл бұрын
Is there a formula or measurement to go by
@BrianBrazealBlacksmith6 жыл бұрын
Doug Watson I'm sure there is, but I don't use formulas and I rarely take measurements. It's funny when people in a class ask for measurements and I tell them that I don't usually take measurements but they can, they never take that measurement. My own brother actually blames me for not taking measurements for him, and I've given him plenty of opportunities to take those measurements he asks for.
@user-pf2hv8qw1s6 жыл бұрын
Do you sell rounding hammers? Or are the ones sold by FFF on ebay OK. Which weight?
@BrianBrazealBlacksmith6 жыл бұрын
松田もしくろす I don't sell any hammers unless someone asks me to make the one. I show people how to make them. I was the one that showed FFF. He was one of my first students to start making them. There are a lot of people all over the world making and selling them now. Some were my students, some were my students students, and some learned by the information my students and I put out there. It's pretty amazing how far this has gone since I started showing others how to do this.
@dragonwaterforge6 жыл бұрын
What is the convex for good rounding hammer
@BrianBrazealBlacksmith6 жыл бұрын
Doug Watson it is like a squashed ball not at all like a half ball.
@dragonwaterforge6 жыл бұрын
Brian Brazeal thanks man
@BrianBrazealBlacksmith6 жыл бұрын
Doug Watson you're welcome.
@mattbehnke7798 жыл бұрын
Now that I have been watching some of Alec Steele's videos and this video over and over again, is that Alec who was helping you record this? I thought that was his voice when he said "recording". Also, what size stock are you using? Thanks and I really admire your work!
@BrianBrazealBlacksmith8 жыл бұрын
yep, that's Alec filming. I'm using 1/2 inch square copper.
@mattbehnke7798 жыл бұрын
I thought that was Alec. Are you using copper because it's easier to forge or does it make a better leaf? Do you get your copper from the steel distributor? Thanks so much
@BrianBrazealBlacksmith8 жыл бұрын
+Matt Behnke I'm using copper for the video so you can see what happens to the metal better without the glow you get from steel. yes I get copper from a distributor.
@godofflames54277 жыл бұрын
how did you silence your anvil so well
@BrianBrazealBlacksmith7 жыл бұрын
Gunslinger .S. it is mounted to its stand which is anchored to the cement slab. if you take it off its stand it rings like a bell
@godofflames54277 жыл бұрын
Brian Brazeal I figured it would it's a wrought iron base with a hard face i believe if I'm correct
@BrianBrazealBlacksmith7 жыл бұрын
Gunslinger .S. yes, it is a Henry Wright made in 1897.
@PEN73675 жыл бұрын
What type of copper is this?
@BrianBrazealBlacksmith5 жыл бұрын
PEN7367 they call it pure copper at the metal distributors. I went ahead and did a Google search on types of copper and there are different types of pure copper it says. I never asked exactly what type they carried because I was not aware there were different types of pure copper till now.
@Vsshooter11 жыл бұрын
Where do you get your coal?
@lumpymuffinmama83965 жыл бұрын
Is that alec manning the camera?!
@bugsandbrodiaka-elbarto14925 жыл бұрын
THATS WHAT I WAS THINKING!!!!!
@thebobbershop358610 жыл бұрын
What brand is that hammer?
@BrianBrazealBlacksmith10 жыл бұрын
It's just a hammer that I forged myself with someone striking with a sledge hammer.
@thebobbershop358610 жыл бұрын
Ok! Thanks! I found your hammers on ebay I REALLY like them but way out of my price range.
@BrianBrazealBlacksmith10 жыл бұрын
You did not find my hammers on eBay. You found some of my former students hammers on eBay. I give classes that enable others to make their own tools and go home with the tools to make them with others. Before lunch, on the first day of class, everyone has forged a hot cut hardy and a hammer. I've been doing this for the past four years and it has spread all over the world especially with the International Young Smiths and the farriers that have come. We are going to the International Blacksmithing Festival in Devon, England in August with a IYS team to share what we've been doing.
@thebobbershop358610 жыл бұрын
My bad. it was Dave's hammers that I found.
@clydemelton34379 жыл бұрын
I was wanting to know why blacksmiths all ways hit the anvil before ,after and during hitting the steel?
@Earlkrumm8 жыл бұрын
clyde` melton not all do. i think it is to keep rhythm.
@siobhanernst16908 жыл бұрын
+clyde` melton It is just a habit most of us develop to keep in the swing while thinking about what we want to drop a hammer on next or to give a little extra time while turning.
@siobhanernst16908 жыл бұрын
LOL, apparently my daughter left her KZfaq account logged in back in July and I just got around to posting...
@jimdunning60538 жыл бұрын
+clyde` melton They don't. I used to do it just because... Frank Turley broke me of the habit. Called them "dinky blows". Just remember "no dinky blows".
@nathanstrunk76735 жыл бұрын
You hit the anvil to get a different grip on the hammer or rest your arm. That split second can really make a difference. Joey Van Der Seeg has a video on this topic I believe
@wessmith236111 жыл бұрын
Steel
@mattcoblentz7411 жыл бұрын
Can i have you make me one? I am working on making one but yours are way better.
@wade6077 жыл бұрын
what type of metal is used to forge a rounding hammer?
@BrianBrazealBlacksmith7 жыл бұрын
Joseph Penton the same as most any other hammer, usually 1045 or 4140, medium carbon steels. You don't want hammers too hard. They are for hammering. They should be tough, not brittle.
@BrianBrazealBlacksmith11 жыл бұрын
So glad you are trying and therefore teaching yourself good techniques! It is the point of posting the videos and sharing. Shoot us an email if you have questions.. brianbrazealblacksmith@gmail.com
@wilhelmweyer678611 жыл бұрын
The benefit does not make sense to me. If the face of a german-styled hammer is grinded/shaped correct, you can do the same typ of forming metal. Holding the hammer in different angles you have several fullers to "push" the material into the desired shape. Additional you have a cross-peen, which is even more useful to "push" the material.
@starship30953 жыл бұрын
Did he say 'like rolling a pie dough ' ?
@BrianBrazealBlacksmith3 жыл бұрын
Like rolling out pie dough
@BrianBrazealBlacksmith11 жыл бұрын
yes it is copper
@BrianBrazealBlacksmith11 жыл бұрын
google, LBrand coke. I am not allowed to post the link
@bluesea91447 жыл бұрын
How heavy is this hammer?
@BrianBrazealBlacksmith7 жыл бұрын
that hammer weighs 3 2/3 pounds.
@BrianBrazealBlacksmith11 жыл бұрын
brandon Mississippi near Jackson our email is brianbrazealblacksmith@gmail.com
@jasoncook63015 жыл бұрын
Brian Brazeal lol I'd been watching your videos for years and literally just found out we live in the same town....small world
@BrianBrazealBlacksmith11 жыл бұрын
yes, email us, brianbrazealblacksmith@gmail.com
@garybutner74827 жыл бұрын
N
@BrianBrazealBlacksmith11 жыл бұрын
No, it is copper.
@itsawonderfulknife70315 жыл бұрын
What?
@BrianBrazealBlacksmith5 жыл бұрын
What what?
@itsawonderfulknife70315 жыл бұрын
Can hardly hear you. Lol.
@BrianBrazealBlacksmith5 жыл бұрын
@@itsawonderfulknife7031 you don't have to hear me, just watch what the metal does.:)
@itsawonderfulknife70315 жыл бұрын
Brian Brazeal Why are you talking then?
@BrianBrazealBlacksmith5 жыл бұрын
@@itsawonderfulknife7031 because I explain everything I do.
@scottsalgren20247 жыл бұрын
Camera man needs practice!
@BrianBrazealBlacksmith7 жыл бұрын
Scott Salgren That is Alec Steele filming. I think he has the practice now.
@scottsalgren20247 жыл бұрын
I find that to be funny as it is Alec Steele that I had watched first. He was singing praises about having learned much from you. Brian, you explain things well. Thank you for sharing.
@CKE142B5 жыл бұрын
Pounding cold metal. :-(
@BrianBrazealBlacksmith5 жыл бұрын
Interesting, I've seen and heard a lot of different people imply the same thing, but you may want to take another look. You may see that it is copper and is quite forgeable. I use it a lot to explain forging and encourage others to try it. You can see it better because it is not glowing and it does allow you to forge it longer. It will work harden like other metals, but you can plainly see that it is not occurring in this video. Give it a try.
@BrandXsps5 жыл бұрын
@@BrianBrazealBlacksmith I was wondering how it was moving so much. So it's not super human strength.
@BrianBrazealBlacksmith5 жыл бұрын
@@BrandXsps let the hammer do it and use the best surfaces and it will practically make itself.
@BrianBrazealBlacksmith11 жыл бұрын
Brian makes hammers for those who ask but prefers you take a class with him to learn to forge tools for yourself. Class is $250. a day (including room and board), a hammer 3 1/2 and under is also $250 and can be finished in class along with a hot cut, in less than a day. It is a better value to get tools and forging info with Brian.