Why you may need a Thermostatic Oil Cooler
Рет қаралды 3,968
Күн бұрынNever Overheat Again! In this weeks video we equip Tony's Nissan 370z with a Vibrant Thermostatic Oil Cooler Adapter (Sandwich Adapter) to keep down those oil temps during hard and regular driving.
►Subscribe: bit.ly/SubscribeToVibrant
If you want to learn more about Vibrant Performance Products that were seen in this video, check out some of our product videos:
bit.ly/VibrantParts
Or visit our website: www.VibrantPerformance.com
Follow us on Instagram: @Vibrant_Performance / vibrant_performance
0:00 Intro
0:37 Why you may need an Oil Cooler
1:33 Installation
18:03 Startup
18:14 Outro
@frostbytesims Жыл бұрын
The Z may be white but this video is pure gold
@seethruhead7119 Жыл бұрын
Nice Z tony.
@HallBuilt Жыл бұрын
That Z sounds really good! 😁
@rubiaragagon7722 3 ай бұрын
I agree on this. 370Z tends to run at 190F at low loads, and around 195 ish at high loads. Got me a Z1 25 row oil cooler with a thermo sandwich plate. Now it runs at 180F at low loads and 175F at high loads. Perfect temp, will not cook your oil and will maintain perfect viscosity for lubing. No thinning. It’s a must for desert applications.
@NudaMan Жыл бұрын
“So much for hot girl summer” I’m freaking weak 😂💀
@VibrantPerformanceTV Жыл бұрын
🤣
@alaxtrang 8 ай бұрын
Thanks for this vid! Was thinking of other ways of routing the oil cooler lines and didn't consider going across the oil pan to the driver side.
@kaitlindelima9037 Жыл бұрын
let’s gooo! 🔥😂
@seethruhead7119 Жыл бұрын
can you put a list of part numbers
@VibrantPerformanceTV Жыл бұрын
(1) 17065 - Thermostatic Sandwich Adapter w/thermostat (no spacer) (2) 18970 - Black Nylon Braided Flex Hose with PTFE Liner; -10AN 10ft roll (1) 16968 - 10AN Male Flare x -10 Male ORB Swivel 90 deg Adapter (3) 28910 - 90 degree hose end; PTFE -10AN (1) 28210 - 120 degree hose end; PTFE -10AN (4) 28010 - Straight hose end; PTFE -10AN (2) 20810 - Dry Break adapter; -10AN
@seethruhead7119 Жыл бұрын
@@VibrantPerformanceTV Thank you! Can i ask why adapt twice on each side? Would it not be better to use something like 29908 to connect the hose directly to the adapter plate? And m22 hose fitting on the cooler side?
@mypinkjistring Жыл бұрын
@@seethruhead7119 The oil cooler we used came with the M22 x -10AN fitting so we decided to use what was provided. As for the sandwich adapter side, the decision to use the tight radius 90 deg ORB x AN adapter was done on the fly due to clearance issues and unfortunately, we didn't have 29908 with us at the time. 29908 probably would've worked too in this situation.
@seethruhead7119 Жыл бұрын
@@mypinkjistring thank you! what about the mounting bracket for the oil cooler to the radiator support (top right angle bracket) ?
@mypinkjistring Жыл бұрын
@@seethruhead7119 it was a special order part through Z1 Motorsports that usually comes in a kit.
@itsmistersmoke 9 ай бұрын
Yo what exhaust is that?
@VibrantPerformanceTV 9 ай бұрын
Full Vibrant Titanium (running a pair of Vibrant Ti Resonators and a Vibrant Ti Muffler), with Z1 Headers
@Kashusr Жыл бұрын
Major Ji Alert! Or should i say, Major Z Alert!
@VibrantPerformanceTV Жыл бұрын
😮😮
@mrrberger Жыл бұрын
Dude, that was the most painful advertisement.
@VibrantPerformanceTV Жыл бұрын
the ads or the video?
@avanjob205 9 ай бұрын
hmm...yo my dude. Most oil containers nowadays have like a measurement marking on the side of the container with a window. Castrol has it, Valvoline has it. And I am pretty sure , Motul would have it.
Mishimoto Automotive
Рет қаралды 70 М.
Garage 54
Рет қаралды 4 МЛН
Kevinpinky
Рет қаралды 4,9 МЛН