I can tell yo camera was also made in China

A rusty chain and gas leaking out the vent cap when its tipped over. Is not a china bike problem.

Did u say 6 is a odd number

U took an chinese bike to the track!? Hahahaha

not all chinese bikes are bad atomik ssr pitpro braap why would you spend 2k on a chinese when 2000 dollars can buy a honda crf150r or a yamaha yz

that bike need some milk

You sound a bit like Walt junior! Lol

Things have changed since 2007!

At least you have a bike

What's a break capsule?

I have heard and seen many similar problems. You should be commended for sharing this information. Some do not know about this stuff. Bummer about your bike but it is nice of you to do this. Thanks for sharing.

All chains are like that ahaha, you just dont look after your bike, if you used chain degreaser and chain lube on that chain it would not have rusted.

you payed 2000 for that shit? damn, the sell for less than 1000 here

Well if this is Chinese well what's parts from Hondas or Kawasaki they all have parts from China no matter what bike you have

saw a guy on Craigslist trying to sell one of these Chinese dirtbikes just like this one. only thing is he tried saying it was a 2001 Honda crf250f. it was 3500$ so I went to go check it out, soon as I get there, first thing I noticed was it had plastic grips and a plastic throttle, a odd looking kickstarter for a crf, and a small seat, like on the bike in this video. I told him that it was a piece of shit and not worth anywhere near $3500.

ok this is my chinese dirt bike that was made in china, Well no SHIT xD

These bikes are meant to teach kids the fundamentals of riding so your not buying a bike for 3800 to 5900 (depending on producer) now that you know how to ride save up and buy you an actual dirtbike to go have some fun on...they intentionally make the stand tall so you learn to be aware of gravity.....they make them not have torque so you dont go out and try to go full blown motocross,as an untrained rider ! This bike has done its job WELL taught you to be aware of your equipment,keep an eye on all your bolts...do a quality/safety check before each ride take it as a learning experience and the next bike respect it make mental notes of what went wrong with this bike and check for those issue and how to prevent it...best of luck and ride safe!!!

ok, i have a Chinese dirt bike, i have been riding it regularly for over a year now, the bike works absolutely fine, the only thing that i had to replace so far was the clutch lever. i know that they are not the best of quality but if you look after it will maintain, the carburettor is the only thing that fails from time to time but after it is cleaned its working fine.

i have a gio 125 had it for 4 years its mint i would not get any size bigger if you use the 125 on atv trails and just for fun you do need to baby them i only paid 700 for just fun to boot around the streets and trails got two 250 cc for the real trails. nice vid man did you get a better bike man

Other than the issues you've mentioned here how do you like the bike overall?

what you have is a 1:1 dirt bike model. it is too fragile for anything except for displaying in your garage.

al you have to do is make sure everything s tight and if something is loose than you just need to take it out and put locktight on it.

Hey man thanks for the response. I've been looking at some Chinese made things recently and wondering. I appreciate your input. I'm going to have to dig a little deeper before I make up my mind -- but it's definitely good to know what manufacturers I should be looking at.

How'd he go from piston rings to the chain rusting? Anyways he's supposed to oil the chain, preferably with a chain wax so that dirt and water are repelled

COULD OF BOUGHT A CR125

i have a chinese dirt bike and i did some minor modifications to it and its a really good bike now

I'm so sorry man. Hope you get a real bike soon!

nice bike, i want one of those hummers, for light use, and not really high jumps, what was the power like, could you wheelspin without using the clutch? chains rust and tanks leak, if the tank dont leak then it cant breathe, and bike wont run.

its called a brake caliper and 6 is a even number not odd.

The first thing you should understand about this particular bike, it is clearly not designed to be ridden off road, it's just styled to look like it should, I mean, how many Chinese off-roaders do you know?? This is designed to be ridden on the road and it has the smaller rear sprocket rather than the 52+ tooth item more commonly found on dirt bikes. The lack of frame reinforcement also says this was never meant for serious dirt riding. This video is also a bit misleading as not all Chinese built bikes are the piles of kak this one clearly is and those made under licence, whilst not quite up to Japanese standards, are perfectly acceptable for those on a budget if you don't mind inferior build quality and cheap alloy engine castings which are prone to brittleness and can crack when the machine is dropped, (Just don't drop it! Simple!) If you want to ride off road, then buy a bike that's designed for it and if you are on a budget, you're far better off going for a second hand Japanese or KTM or Whatever, or at least something with a bit of pedigree behind it , not thrown together with a lawn mower engine and frame members made of noodles in a chicken shed by a bunch of unskilled peasants just to make a cheap knock-off! As always, You only get what you pay for and beware of anything that seems too good to be true. If the price is cheap as chips, you can bet the materials, build quality, components and welding is too...

I hear ya i bought a Chinese four wheeler and the day i got it it wouldnt start, i got it started and rode it for about an hour came back to the house and realize the back and front axle were bent so we just shipped it back

I plan on changing the tires and riding mine on the streets to complete my paper route any tips on making this thing quieter

7:30..2000$ holy fuck.. I got a 2002 Honda Crf450r for less then that

Never order a bike online

how did the piston rings go did u break the bike in befor riding it hard i heard the motors in these bike are good but everything else is garbage.so how long of riding did u do beefor the rings went

I have an atomik 140 that haven’t broke down once but a good vid never the less

You do not know anything about dirt bikes Chinese bikes are fine if you do maintenance

These things last years if you do maintenance after every ride. oil change every 2-5 hours chain lube ,clean everything, don't go over big jumps or thrash it as it is Chinese. its made cheap but if you look after it , it will last a lifetime.

Im down $2700, but i got a 2013 RMZ250 with race engine, RG3 suspension and procircuit exhaust. 78 hours on the hour meter.

Did u go through the hole bike and tighten everything up... might be your problem

True, but if you buy a piece of junk bike your going to end up sinking lots of money into it. If you buy a "KTM" or a bike of similar quality you will have fewer problems and spend more time out on the track.

Get a zündapp, suzuki tsx50 or puch maxi. Those things never break.

Only probelem ive had with mine is the cluch lever broke when i hit a tree, and the clip at the back panel which you said, came off, but a quick weld and it was fine. Clearly looking at your bike you bought from a competetor or a older version. I took mine down to black duck, nothing wrong happened so im pretty happy with mine. If your bike sounds like it is botteming out, clean the carberetor and replace the air filter. COST about $50 AU.

He bought it brand new. Took the risk and paid the price! No resale value with these things

It's funny because my Chinese bike has lust me 7 years so before you buy one you check the company and reviews

You spent 2 grand on this ? Are you kidding 😂 you can buy a 125-250 ( real bike) for that

Well I had an Apollo 110cc manual and never had any problems. One tip when having a chinese bike is to take really really good care of it. You have to check every bolt before riding and you have to check the bike out almost every day.

i have a hummer and i have had a few problems over the last few years but mostly just cables and brakes the engine works like a top. i found that you cant go by the dip stick you have to over fill it by a quarter of a liter and also if you dont want it too fall apart on you you have to tighten EVER!!! nut and bolt before you ride it also you have to remember it is a 4 stroke so you have to go easy on the revs unlike a 2 stroke i also change the oil once a month because i do a lot of rideing

I'm just sticking with yamaha for all my bikes

how is Canada EY

I was looking at gio dirt bikes but was iffy on the quality, thanks for the video man, think im sticking with yamaha or kawasaki

you tell me from which site did you ordered it?

That is why you should buy a KTM.

u can get those all day brandnew for 200-400 cad maximum

Okay, sorry I'm lost.. In the ending credits it says you only paid 700$ for it. What is this 2000$ in the description about?

Swing arms have plastic bushing usually. Even 4 wheelers have plastic bushings. My Polaris has all plastic bushings

I drove a zongshen 125 from Inner Mongolia to Tibet and back again with no problems, got a flat once that is it. 2 months and 10,000 km's.. loved that bike.

can i ask what dose work on you bike ?

Even though i had problems with my bike such as the tubes always popping, or having to replace the levers every so often. It is almost impossible to kill the damn engine... I had it on a steep hill. I cut it off to go down to help my brother with his bike (he was having trouble starting it) got back on while on the hill started it and rode the rest of the way.

really ? did u buy online? cuz i wana get a 125cc and ima jump it alot but all these people tell me that chinese suck and it freaks me oout... so anyways i dont have the money for a suzuki or a honda so im like wow there 500-900 dollar 125cc bikes pretty cool... van u tell me if its worth it or should i save up for like a crf100?

I had a kinroad 125 and I never had a problem with it I had it for years too.

ssr pit bikes last almost forever, I had one for over 3 years not one time it broke down, still rides like a champ since it ever came out of the box, paid 700 for it brand new, still have the original tires.

for 2000 bucks you could get a nice 250 2 stroke or 4 stroke or a 450 off craigslist

How much did you buy it for?

Hey JonDeth, Can you elaborate on what you're talking about here? Like what makes/models? PM me if you like. Thank you!

did you buy that at harbor freight?

I really feel bad for you man..like I do...my dad went on a website of chinese dirtbike like these for around $400... then i saw this vid and showed it to him...saved my ass man..lol

Why is it 2020 and KZfaq is recommending this video to me?

I have a Honda CRF 150 it's held up pretty well like all other honda's

I would never buy a bike like that, dude go on Craigslist

The fact they denied your warranty claim is awesome

what do u think about welsh pitbikes

i just got a 110cc pit bike.. most likely chineese since there are no markings.. i payed $180 because its needs a stator, entire throttle and brake lever.. i dont plan on jumping with it just screwing around the streets and maybe dirt ot some point... i dont think i have to worry about the problems our having do i?

The auto shop in my school has a susuki bandit 600S and the choke is on the handle bar in the same place, btw it is a street bike

is it a baja 200 or skyteam or shinetime....

If you absolutely have to have one of these, you better remove all of the bolts, apply thread locker, and torque them down good. Even better, replace all of the motor mount bolts with grade 8 steel bolts from a hardware store. These bikes also come with recycled oil when shipped, drain the oil/gear oil and replace with gear oil. It is also a good idea to replace clutch/brake levers with name brand ones. One fall and the shit metal will break. You can make one of these work, but I wouldn't recommend getting on an mx track.

Actually unless you look on ebay or Craigslist where for example there's a yz125 for let's say $1400 that may be that the owner doesn't know really what it's worth or that it's the condition the bike is in

I have the same bike but mines 110. Alot of the screws, plastic and rubber washers are bad but i have a another one that i swap parts out with. I was woundering though were do u order your parts frim cuz i have no owners manule i got it from a friend

That chain is tight af!

strangely enough, my chinese 200cc bike has lasted 7 years and has finally gotten electrical issues. Probably going to rebuild it when i get a job (I am a student right now). I kind of agree with him though. I only ride for fun, and now I finally got myself a relatively good bike. a 1982 yv125h

The fairings off my skyjet dirtbike also fell off, my exhaust looks disgusting and rusty, I have had to spend £50 to weld like you had too, the rubber on mine are rotting now, I lost my kick stand after ride away from town and never found it. I cant put my bike into neutral when Im riding about, my chain is rusty and has had to be stretched too. My battery is so knackered that the electric start doesnt work in the Winter

Did u Change that oil when I first or it cause u should

what brand was the bike coz im looking to buy one?

Whats the brand name of this bike?

I want a good quality bike for racing and stunts that last a long long time i want it for 2,000 and under or around that price range i want it to be either honda, suzuki, yamaha, or kawasaki any suggestions or websites?

sorry to hear that bro. that thing looks like one good jump would blow it apart. lesson learned i guess

Dude what brand is this

I hav got 1 and its fine and the only thing broke is the break lever and tire apart from that its fine

Did you have a greatwall ute too?

yes, gaskets (mabey spelling mistakes) will break when you take them off. And plastics do scratch when you crash BUT ive come off my YZ many times and have had no real problems so im undecied if its crap or not

where did u buy it from?

My kx is pretty much done but I'm glad I have it now haha, get a kx man

i had one and i drove it for the first time and the exast fell off the chain snapped and the back bearing broke

also before u ride u should check all the bolts

Had a kuzuma viper 110 lol and it ran for 1 year Staright with a beating to it

did this dude just say that the chain links were piston rings?!

I have an Apollo 250 RX and love it..it seems built a little better than this, but still not up to a brand name quality (but neither was the price 1700 NEW 2009)..the RX is simple to work on and has been more durable than expected...I would buy another one, mine seems to have been a good one. (No issues with loose hardware, no battery or calipers falling off. No loose are damaged bushings.) Parts are plenty available for the RX and cheap. Some of the points, you mentioned, I have had the same experience with the RX (must be common with Chinese bikes)..tires wear a little quicker than name brand..(replaceable w/NB)..kickstand a hair too long (sawzall, mig welder, and 10 minutes) ...gas cap not sealing well until really tight and shops will not touch them (ALMOST simple enough to wonder why you would need a shop)...other than that, I would recommend an Apollo RX all day long for common trail riding, for motocross or other racing ..of course not.

I would take you seriously if you didn't say that the front brake is the best to use because it stops you faster.

I have to say one thing, I race motocross and I have a YZ450F 2011 and a 2008 Yz250f. I use to have a 200cc oahlee China bike asa pit bike for over in the hills by my house. I did proper maintenance on. Clean the air filter after every ride, check the valves, change oil every 4hrs of ride time, adjust the chain, etc... On that bike I PUT OVER 100hrs OF RIDE TIME, bike still ran great. I ended up selling it for $500 and i payed $400 with a dirty carb. hey make great trail bikes NOT JUMPERS!

can you use crf plastic's with these ?