Mr Mike is a proffesional loger and I'm Glade to see old school logers like this Greetings from Bosnia

I just ordered a wicked saw works ported 372XPW top end for a customer saw. I am very excited to see how it runs. Terry is very nice to deal with and supper knowledgeable. So nice to talk with someone who knows saws and engines so well.

Great video! Great that Mike hasn't lost the touch.

Good video. Enjoyed watching. Thanks.

great Job! No Barber Chairs on the ash for you Mr Cook! however the other guy had a few close calls... stay safe guys and thanks for the video

mike is a wood cutting machine he was born with a chain saw in his hand lol i remember the old days when he start in the wood business he start cutting fire wood all he had was a old chevy pick with a dump bed then he bought a tree farmer cable skidder lol he cut his way to the top one tree at a time to the top when i was a kid me & my dad use to buy all are wood from mike hes had his up & down in the wood business but he made it to the top of his game i worked for mike too some times he a great guy one of the hardest working guys i know great job mike

Terry builds a heck of a good saw. looks like that one was doing just fine. Sure love my 394s.

Excellent video, Damn Mike is handling that chainsaw like a boss.

Sounds Great!!

Terry s'doing good work on these saws ;)

Absolutely love the 395xp now i want one even more ! I make use of the 272xp and husqvarna 61 but i love the 272 more ! Nice video though

Man Randy did good on that monster.👍 Good work felling those nasty looking trees.

That 395 is the best saw ever

I've just rebuilt my 2001 PRE EPA 395XP, ported and polished? NO. Crank checked and balanced YES, piston and rod assembly NEW, still balanced with crank. Bearings high speed C3 clearance. Initial tune, rich high speed mixture @ 12,500rpm. First tune after felling 3 Australian Red Gums (bloody hard timber) at around 24 - 28 in diameter, over 100ft tall, 13,500 rpm 24" bar, 3/8 .058 full chisel chain. Love my saw!

Love that saw it has the tork

Good song choice -lolI like your big lit up sign on side of build down there Looks real cool at night Good video !

Randy Evans with Mastermind worksaws is another great "tuner"

Thanks for sharing,he makes a tough job look easy.Those gnarly ones make me nervous.

that say sings thru trees as u say sir and your father in law handles it like a master too grate video and that's a dyeing art of running a saw

good running husky 395 XP

Nice ,,, 395's go well and robust ,, :-)

That is absolutely most awesome that Mike is still out in the woods cutting, is he always so serious, once its in your blood its there for ever!!! He looks like a rugged ol fella good thing he likes ya lol, does he watch your videos?... Hope Lacey is feeling better............

Great video! Nice to see some chainsaw action!

Some great cutting be some great firewood

+that chipper guy, you guys seem to do a lot of work around my home town of Mt Pleasant, and I have been watching your videos for the last few days non stop! love seeing the colors of the trees. We don't get them pretty colors down here in florida. Keep up the sweet videos man.

Nice felling video

That man and that saw kicking some serious ash

That man knows he can cut the hell out of trees great vid loved it man

Hey Mike that was pretty interesting watching you cutting those trees down like that. One of mine fell on a neighbor's garage a few months ago! Not a good thing!!. Ruth was telling me about Lacey the other day. so sorry to hear. I will continue to pray for her and all of you. You may not remember me or even remember my name so I guess I should tell ya, huh. I'm your Dad's cousin, Uncle Arn's daughter. You gave me a black eye one time when you were about 4 ! You, Doug, Aunt Ruth and I were playing hide and go seek in a little trailer at your Gramma and Gramps's. You were hiding in a closet and when I opened the door you kicked it, shut! Well it was good getting a chance to say hi to you guys after all these yeaars

Nice cutting stay safe !

Muy buena maquina 395

Nice work

this logger's like Lieutenant Colonel Bill Kilgore in apocalypse now

Where was this forest patch located? I don't think I've seen regrowth come back as fast. Was this a former swamp or wetland area with lots of rich soil? The ground looked really darn, but couldn't tell on most scenes.

Those Tennessee boys know how to build a saw!!!!!! Nice video! Thanks

Should have titled it "Dances with Trees"! Fine lumberjackin there.

Nice cutting video. gettinbg pinched like that is why you always have 2 saws on the job haha

Like a boss.

nice video

I'd hire him..lol..

Who done your port and polish. That 395 sounds beautiful

pretty awesome video!... just a question.. have you considered wearing chaps? I'm not hating, and I'm no safety Sally just a question! keep up the the sweet videos!

Nice fall

Gotta have some “pipes” to run that 395xp !!!

good saw

Faisty barkin' saw. I need my saws to get ported too.... hahaha... Ever been fallin for your company= ?

Nice job...give the old guy the hard trees he'll cut anything...

That guy knows how to drop a tree

Most work I've seen Mike do, He usually just rides in the truck...Still a good vid John.

Are husqvarna as good as back in the early 2000's? heard they sold out. Don't know if that's true though.

At 11 minutes those two small trees that were held down by big felled tree had some serious spring in them

I've always luved huskies cuz all of them always sound really dull

Nothing like cutting trees with a big cc powerhead. I ran 2100’s huskys for years with a 16” bar doing firewood. There animals.

I paid for a saw at wicked work saws and he took my old 385xp and I paid 1300 for a new ported 395xp. Long story short this is week 9 IV called and emailed many times no answer. This guy got me good and I just want people to know so they don't end up like me.

who did the porting and polishing of the ports??

Czemu wicinaliscie tyle drzew?

first!! HA! Lol dam nice saw man and vid! bud

This wasn't up in Michigan was it?

What does it mean "ported"? I'm buying a 395XP. Please recommend me a good tutorial... What accessories do I need?

Is the borer wrecking your ash as bad as it is down here in the land of Tater?

Alright!

Bar is a little short and face cut is backwards for us west coast fellers. Saw is proper though

I bet your chain got pretty dull on some of them trees with all the dirt in between them

Ain't no substitute for HP.

You can tell about a great logger the way he holds his chain saw and cuts the trees.. Thanks for sharing!

👍👍👍👍👍💪🏾💪🏾💪🏾💪🏾

nice saw and video bro , but strike your wedges more slowly and please look up. I have two 395 xps one 2004 and one 2017 totally unchanged. says something about the quality of this saw. cheers from NZ.

be glad you got your saw he has screwed over quite a few guys take their money and never ship a saw to them

That's a wicked saw! Id love to run that bad boy

You need you put a better more open muffler on that thing and a dome top piston in it and it will stop that bogging down ,maybe even advancing the timing just about 5 to 10 thou. It will be a different saw beother you'll be glad you invested the money for sure and if that's an xtorqe jave it covered to none xtorqe It will last way longer in the end !!!! The pistons dont fair well on the xtorqe becaise of the clean fresh air injection into the hot cylinders ,its obvious wjen you look at a used xt cylinder next to a used non xt cylinder! Trust me on that one ,ask ole ironhorse

Lucky your not killed .

Should have sent it to (mastermind work saws) it would run much better. You should probably consider yourself lucky you got your saw back. I know there's several that didn't.

You're not the poster boy for PPE but you can run a saw!

That ain't enough saw for the man....3120 41" would be proper

How is he going to cut up all those trees that he cut? It's going to take a half year just to clean it all up. Lol.

The only thing ive ever heard about wicked work saws is never send your saws to him. Cause you may not get it back. Probably why he's not in business anymore? Too bad seems to build an ok saw.

Nice. However. No need for a polised saw. Easy trees.

to much over cut on your notches

hahaha man a 24" bar on a 395 wtf!? a 562 would pull that bar full power no problem. I can understand maybe its a new powerhead and you want to try it out but put atleast a 36 on that bad boy thats where it feels at home!