That's mostly what the bed bars are for nowadays anyways, just for show, but they do look nice

Thanks for the input that’s good to know

Awesome! Love the 80’s style trucks!

Not be bad. 2 of us lifted them into the back.

is my bumper dodge ram 2th generation kzfaq.info/get/bejne/fJ-FqrV-tZOvf3U.html

Any water under the bed liner should exit out the back. Maybe cut the liner where it mounts to the bed to get a nice fit.

I like them.. Double / singles will not take up much bed space. I still have room to do what I need to.

Thru the bars. It takes some patience but can be done. Start at the top just below the curve and come out the bottom before the base plate. Do that in the inside facing the cab to hide the holes. Easy to do before they are assembled and put in the bed of truck.

@@WickedFabz ok thanks. I put and bolted everything on now. For now they are for show. I’m thinking about bedlining the bed or at least painting where I drilled to avoid rust, since I have a truck that just doesn’t seem to like the salt. (1997 Nissan D21 4x4). So did you run the wires through the main bar, or the kicker? I also see you fed the wire through the little hole for the lights, did you snip the end of the connector and feed it through? I don’t have the money to mess something up, and I’m only 15 so I’m trying to learn as much as possible before I do anything. Thanks

I’m currently overhauling mine into a show truck. I bedlined it before installing the bars.

Already done. Truck is getting resto.

@@WickedFabz y yea

Wait till you see the rebuild. Got other vids on what we are doing!

I’d like to see you driving it around not sure if you have any videos of you driving

I’ll have to look. But I think I don’t . Only had them on for 4 mos before the restoration started.

Well I’ll look forward to you driving that sick truck around off road, hopefully you can make it happen

Yes. Thanks

aaautostores.com

I like the old School look Also

From A&A Auto Stores

Thanks and keep up the awesome vids 👍🏾

They made me an offer I couldn’t refuse....lol

Wicked Fabz nice I thought about them for my build but was a little pricey and I might want to drop on a camper for the beach

Awesome! Not a problem. I have oversized doors.

Yes you have to bolt them in.

@@WickedFabz are the spots east to access or did you have to remove anything?

Check with a&a auto stores. Link is in the description.

Awesome. Worked well. And held up good.

@@WickedFabz ok thanks I was on the fence about it didn’t know if it would hold the weight of the four day lighters I want to put on

That bar across the top is also mage by go rhino. It’s the light bar and the part num is 900B

@@WickedFabz Thank you so much. I just placed my order.

I ended up running down thru the bars.

@@WickedFabz but how exactly did you do the wiring. I have the same bed bar in chrome.

At the time the wiring wasn’t done yet., truck is now getting a complete overhaul and the wiring is going to run down the inside of the bars to hide the wiring.

Wicked Fabz ok, thanks for the response. I have the single/single with the light bar in my 97 Ford Ranger and really don’t want to zip tip the wires to the outside of the bar. I’m assuming you need to drill holes to drop the wires in and out of the roll bar?

These bolt to the bed. True protection you would want to have a set that is thru the bed and welded to the frame of the vehicle. However something is better than nothing and should add some protection.

@Wicked Fabz damn you're right, thanks a lot mam. Quick response on an old video. Good looking truck btw

they are halgen kc lites, 200w. going led soon

Yes. With the light bar it came in at 7’8”. I have 8ft doors

Wicked Fabz good deal. It looked close.

To be on the safe side, 4ft would work well with them.

Wicked Fabz thank you!

I know they use to. But not sure now

No they don't I have been looking into it, let me know if you find anyone who does

No they don't I have been looking into it, let me know if you find anyone who does

No they don't I have been looking into it, let me know if you find anyone who does

It is go rhino part #900B. Around 4 1/2 feet.

Wicked Fabz what about the diameter of it

It’s like 2” wide.

Truck is getting overhauled and is now a show truck. “Mud Truck” to “Show Truck” SEMA Build is what we are calling it now. Thoughts were to put a cover on it and we would cut the area out around the bars and do some sewing work. I would use a Velcro type cover to do so.

Check my periods vids out on this! Explains everything. 5” skyjacker, 16x10 dc2 with 35x12.20 boggers. Truck is getting a total make over.

Not long. Maybe 2 hours.

Lol your name is literally "black power cartel"

@@stormwolfgames6636 I know but u have to understand what it means and what they flag represents to my people n the destruction behind it

@@Vibes36579 Jesse lee peterson doesn't seem to care and he grew up during jim crowe days. You know there were blacks who fought for the confederacy right? It represents defiance to the federal government to us not just slavery.