Widening some Volvo steelies. From 6" wide to 9" and 9,5". Recorded with Nokia N8.
Пікірлер: 569
@2102Chris9 жыл бұрын
They will work just fine. Many of my friends are using wheels like these. Nice tutorial ;-)
@limitlessluis10 жыл бұрын
I've never seen how this process is done. Nice job man! :D
@Yeti.166910 жыл бұрын
every one can hate on him but they aint building like you are thats good work bro BUILT NOT BOUGHT !!!!!
@martinn4499 жыл бұрын
Chris Madayag I agree! I'm a machinist, and I just did a silicone implant on my girlfriend! BUILT, NOT BOUGHT!!!! (Irony may occur)
@jaysonhahn81456 жыл бұрын
YETI 16 BOUGHT Then BUILT
@E36andE46vlog3 жыл бұрын
Wow that 's really a craftsmanship!
@christopheralcuizar67603 жыл бұрын
We've done this on our shop many times already, and there's no problem. :)
@alexwarlock89 жыл бұрын
props to you man!! awesome project!
@can2ej611 жыл бұрын
that video quality is pretty darn amazing.
@MGMarcel10 жыл бұрын
Great job mate, i luv it !
@MRCFAITH11 жыл бұрын
who gave you my playlist, and dude no glove no love come on now. good work.
@onetonf35010 жыл бұрын
I've do e this on two different sets of wheels and it works great. Spin on cars axle before final bead to make sure it's true. And make sure there is a drop center in the wheel close to one of the beads so your tire mounts easy
@Grimjau3 жыл бұрын
Thx for share this video. Greetings from Austria !
@Nutguy958 жыл бұрын
love how all the boy racers are saying how unsafe this is even though hotrodders have been doing it for years
@gregkar27368 жыл бұрын
+Nutguy95 i have a set of wheels i like a lot in a RWD roadster but they are 17x8J all around, i recently bought a new staggered set 17x7.5 & 17x10, now that i have a brand new staggered set i will definitely widen my old wheels nad keep them for reserves
@checkforfleas94526 жыл бұрын
Nutguy95 tell me how it's unsafe. I can see maybe drifting with them. But you should definitely consider how wide they are going to be. But I mean they make offsets. So why in the hell is this dangerous. Also dragsters are going one way, straight. That's it nothing more. Someone didn't take physics lol. I agree buddy. Those are the ones that think they know it all and are on a damn high horse
@m.h.54006 жыл бұрын
Jeremiah Arnold there's a difference between hot rods and dragsters but ok
@checkforfleas94526 жыл бұрын
Ayyy lmao where in there did I say hot rods? And tell me. Usually hot rods are for drag. Ya know, power. Not these fucking ricers. But what would u do with a muscle car? Do u honestly think it's safe to put it on a closed circuit track?
@m.h.54006 жыл бұрын
Jeremiah Arnold dude. Nutguy spoke about hot rods. And not everyone who has a hotrod uses it for the strip only
@d-e-a82096 жыл бұрын
I never stayed on a video for the song but this song has made a exception. By the way nice video if i had all the tools necessary ill probably start a rim company.
@masulii11 жыл бұрын
Thanks, it was easy with strap. Yes, I have driven about 20tkm, not were difficult to balance. Allmost better balance than new one 19" Barzetta wheels.
@nikkhalmizahar178 жыл бұрын
still remember a friend of mine using the same method in the late 80's for his holden v6 coupe.
@UltraMagnis10 жыл бұрын
Awesome song dude the first one
@kirkw95skate9 жыл бұрын
the safety probably all depends on the grade and thickness of steel you use, as well as the welds...
@jocke96598 жыл бұрын
coincidence that the video is 7:40 long? Maybe the steelies is for a Volvo 740? :)
@masulii8 жыл бұрын
+Joacim Lethenström Yes, for a Volvo 740 masuli.kuvat.fi/kuvat/Volvo+740/2013/130716-3.jpg/_full.jpg
@TheCanadianBubba8 жыл бұрын
+Masuli great looking car !
@jans.21238 жыл бұрын
+Masuli is it true that it is really difficult to get coil overs for volvo's ?
@bluebanana67538 жыл бұрын
there dosent even exist coilovers in sweden that are bolt on what i now
@petteraberg74528 жыл бұрын
+swedish minion yes it does
@RickSanchez-it3od11 жыл бұрын
mau5terpiece Hom, nice job i love that Steelies greetings from Mexico City
@lucasroberto46337 жыл бұрын
What is the thickness in millimeters of the sheet that is used to widen the wheel?
@kbdigital80013 жыл бұрын
Loved the music man
@user-xu6fp9zy5e9 жыл бұрын
После прихватывания сваркой (перед обваркой швов), желательно проверить на радиальное и осевое биение. И, при необходимости, подкорректировать геометрию.
@AdrenalineJunkieProd11 жыл бұрын
Thanks for posting this! Excellent Video, great method with the ratchet strap. Have you driven on these wheels yet? Also were they difficult to balance? They appear to have gone together nicely.
@rmilla30822 жыл бұрын
Olá tudo bem! Belo trabalho. Qual a espessura dessa Chapa q vc usou aí para alargar a roda amigão?
@mr.x91439 жыл бұрын
That "feeling" straightening game is strong
@vadimka_huli8 жыл бұрын
Wow. real quality job! definitely Respec!
@LEterribleONE11 жыл бұрын
Sweet! Thanks for uploading your work.
@anarugurlu875 жыл бұрын
I have 17 custom steelies on my BMW e34 and it looks so amazing like it says all eyes on me 😎
@3finnian4 жыл бұрын
From a t5?
@anarugurlu874 жыл бұрын
@@3finnian x3
@romandybala8 жыл бұрын
Love to see you run a dial gauge over the rim. And put it on a balancer. Good luck
@bunning638 жыл бұрын
I've got some widened steel rims and they're fine, all depends on the skill of the operator.
@Slazlo-Brovnik8 жыл бұрын
+Roman Dybala Exactly my thoughts
@EscobarMT8 жыл бұрын
ikr!
@kekeruus7 жыл бұрын
Roman Dybala this is most professional yet i have seen way worse hackjobs done before.
@tenacioussoul37947 жыл бұрын
Roman Dybala whats a balancer and a dial gauge do?
@kaspernielsen17969 жыл бұрын
It looks totally awesome, I've been thinking about trying out the same thing with mine, but how did you get them balanced? Don't mind the criticism blockers, that is great work considering the tool at your disposal.
@AdammP9 жыл бұрын
fantastic skills man. love this kind of work! can i ask did you experience any wheel balance problems ? just curious thanks.
@cannaroe1213 Жыл бұрын
What the F do you think lol.
@shawaazhisaund67275 жыл бұрын
Hi masuli.can u please tell me the thickness if the iron sheet you use for the spacer. Btw great job
@anurallah9 жыл бұрын
do you guys re-polish and restore work wheels. I have a set of varianza t1s silver machine finish in step lip. how much would it be for the set of four and how long does the process take.
@thanator60945 жыл бұрын
For all the people that say it is unsafe..it is unsafe if the works is not good..but this guy did a great job..trust me it's 100% safe..
@leonemic4 жыл бұрын
Very nice work!
@masulii11 жыл бұрын
Thickness of sheetmetal is 2,5-3mm. It was bent allready in the metal workshop from where i ordered them. I think the tig welding is better than mig.
@masulii11 жыл бұрын
Balanced better than new 19" Barzetta wheels ;)
@SSsacas9 жыл бұрын
I like his safety gloves!
@as3cs36 жыл бұрын
Also it's not easy to get welds 100% airtight so do these rims need to be used with inner tubes?
@CorzaBell9 жыл бұрын
They look awesome as!! 1. What is the thickness of the sheet metal? 2. Does it distort much when fully welding like that?
@imnota6 жыл бұрын
Funny how people say it's unsafe lmao they probably don't know that the center of most steelies is only tacked in... So those are more than safe, they don't realise how strong that gauge of metal and welds are.
@NickThePilotUSA9 жыл бұрын
I will need to get some steelies for my mustang sleeper build...steelies and v6 body disguise and quiet mufflers with a boosted v8 under the hood. That will be a good build when done.
@danieldrake38358 жыл бұрын
haha definitely!! I was gonna stretch some steelies to 14" so I can throw em on my twin turbo powerstroke Cummins
@deanbrevis21407 жыл бұрын
Can you make 3 piece split steelies? If so show us too
@TheBeastOfTheEast548 жыл бұрын
he obviously just trusts his craftsmanship
@dharmakissoon4 жыл бұрын
hi i really think you should use some kind of dial when putting back the lip on, how do you know if it's balance? but still awesome work to the max, who knew you can make factory steel rims fly.
@kladden1710 жыл бұрын
is it possible to make it all easier by taking the rear part of a second sett of wheels on the outside of the new wheels? since the inside is pretty deep already!? and if you cut the backside as you did at the first sett!?
@harrykuntz8785 жыл бұрын
this is a good idea only thing is a hole will have to be drilled for the air valve . I was thinking of using a hub welded on to a home made jig tacked or clamped on to a work bench and also a clamp to hold the grinder steady that can be lowered to evenly cut off the piece of the rim .
@reynaldoliver91675 жыл бұрын
PERFECT MY FRIEND, LIKE
@thedevil8058 жыл бұрын
؟ What is the type of steel used and the thickness
@davidmicex9 жыл бұрын
After tacking, should of thrown the wheel back on the lathe put it on a lower rotating speed and do a nice constant bead.
@LifesAbe-ach9 жыл бұрын
Then spend a day removing the spatter ... why cant you roll and weld free hand and still get a decent even weld seam ..oh I forgot you can't weld. welded must be a million miles of weld on cylindrical parts and rarely used a manipulator or rolls. And always perfect continual welds.. Oh I forgot I am a welder .
@davidmicex9 жыл бұрын
ULTIM8STUCH Can't tell if you're upset at me. I'm not saying he can't do it free hand I was simply saying with the use of the lathe it would of made it easier and faster to weld. Clean up would of been the same either way. And I myself also weld and know my way, so good job, glad to hear you can weld perfectly.
@magnum3572255 жыл бұрын
only problem that would happen here is if he did strait welding without spreading his heat properly between both sides
@TheColebyArnett5 жыл бұрын
ULTIM8STUCH Dude you’re a straight up agro piece of shit.
@adeh5033 жыл бұрын
@@LifesAbe-ach twat
@JohnHill91B8 жыл бұрын
how do you think the they make widened wheels.
@1ivannthegreat6 жыл бұрын
Well, I was waiting for it with the tires installed.
@drift01417 жыл бұрын
how thick steel is good too run when you do this?
@sylvesterstorer11372 жыл бұрын
Nice I would like 4 of those right now
@RegurgitateEucharist10 жыл бұрын
what kind of metal did you use? & did they work out well? very good video
@JDWard-Jeepster4 жыл бұрын
Can this be done to 15x4 donut wheels? I have a set I want widened to 15x8.
@davidthorne67968 жыл бұрын
Measure up from the table atleast to square them in six places or so as you go around and tack!
@manuelsauceda37889 жыл бұрын
that gauge or measure is the plate you put him in the ring increased
@Xixu.co.611 жыл бұрын
Cool. Always wondered how this was done.
@scoutroop8 жыл бұрын
si quedan bien calibrados y valanceados? no vi que hiciera medida alguna.
@ron72024 жыл бұрын
That’s gonna be tough to balance.
@DeltaSquad439 жыл бұрын
I saw a video about one russian guy, who's making same sort of things. He makes it a little different. He got a self made special machine, that bends steel stripe for him into a desired radius. It's pretty simple machihe actually. Just 2 stationary rods in bearings and 1 movable rod between them, also fixed in bearings. By adjusting height of the middle movable rod he can bend steel very smoothly. I guess you could build something like it.
@YellowCamaro859 жыл бұрын
neat but I question the integrity of its strength and its durability at highway speeds and under the full weight of a car ..but very cool nonetheless
@TheMightyOxY9 жыл бұрын
If the steel they used is the same, than the one used on the wheelies and then if the welding is done like it should then it's going to be as strong as it needs to be, depends on the skill level of the person doing this.
@YellowCamaro859 жыл бұрын
I could see that but still kinda sketchy
@haukurthorsmarason52679 жыл бұрын
I had 14" wide 15" tall steelies with 38" tires under my Land Cruiser, never had any problems of any kind. I know of guys running 20" wide wheels with 49" and 54" tires under fullsize trucks like F350 and HD3500. Those are street legal rigs and driven hard off road, so they get used at 60-70 mph and in extreme off road conditions. Those wheels are widened in basically the same way, so I'm sure they'll hold fine under a Civic or little sportscar, as long as the welds are good.
@joku89009 жыл бұрын
This video maker said in comments that he does welding as his work, so we can suppose that he knows how to make strong weld joint. And Finlands maximium speed is 120kph (75mph) at summer and 100kph (62mph) at winter, so speeds are not so high at here. Of course those rims are illegal and you might get ticket from police and you will fail MOT test if you go there widened steelies on your ride. There is company named Vannepaja (check vannepaja.fi) in Finland which makes modded steelies to show cars. If I would use modded steelies, I would drive way under speedlimits just for extra safety.
@CanadaBud239 жыл бұрын
I've seen dozens of factory and aftermarket wheels fail, break, bent and out of round. People drive around in without a care in the world. Factory steelies are usually spot welded together. Jeepers and desert runners have been doing the widened steelies for decades.
@sxdbxiiwxrld46299 жыл бұрын
How they look on the car
@samuelprovencal255610 жыл бұрын
thats pretty simple ! But did you balance them after? was it a good result or not?
@xarishewii68410 жыл бұрын
How many kilos it's now? ? I think it was to heavy
@hotrod_kris93953 жыл бұрын
Nice video!
@deepienaar11 жыл бұрын
planning on doing the same to a set of 15" steelies for my mk1 golf...just wondering did you fit tubes or are you an expert welder as they say?
@grandad87535 жыл бұрын
Very cool, good job
@xxidk159xx69 жыл бұрын
What is the first song? Very cool video, ill be doing this with a pair of rims for my 84 vw rabbit tdi.
@Shtillmatic11 жыл бұрын
@mausulii what way did you do it here?
@JesperAlsen10 жыл бұрын
Mycket läckert på jag säga! Dags att sätta min plåtisar i svarven också!:)
@MoparGuy16256 жыл бұрын
Can ya widen aluminum wheels as well?
@denningoncalves9864 жыл бұрын
Qual é o nome da chama q vc usa para alargar??
@seanjames55544 жыл бұрын
What size is the metal sheets you put around the rims? And how thick is it
@masulii4 жыл бұрын
I measured the rim and added 10cm more. 3mm
@PedroRodrigues-jk6sm9 жыл бұрын
Which is the thickness of the steel sheet??
@MsLiextreme9 жыл бұрын
what exacly material for welding you use??
@JohnnyK28114 жыл бұрын
Steel
@WrxRam5 жыл бұрын
Can this be done to alloy wheels???🤔
@matas73368 жыл бұрын
how thick that metal sheet has to be?
@DavidSilva-vo7pk8 жыл бұрын
how many centimetres are the metal that you weld?
@andrei_p_869 жыл бұрын
Wouldn't the wheel balance be affected by doing this? If the wheel isn't perfectly aligned after welding it, will cause vibrations which i'm not sure that can be removed by only balancing the wheel.
@joaofelix7400 Жыл бұрын
Top My friend. Its possible to know the thickness of the sheet metal that you use?
@masulii Жыл бұрын
3mm
@ReiberJakobsson10 жыл бұрын
Great vid!
@TheBugbugboy10 жыл бұрын
did almost the same a few years back. final welding was done with the wheel sitting in a plastic kiddie pool filled with water to keep it cool. never ran the car on them, but a friend got them and ran them. actually balanced at tire shop pretty well. i still don't trust them even when i build them, although i made them as safe as possible. guess i'm just afraid of death at 90 mph.
@debbiecare541010 жыл бұрын
There not made for speeds over 40 lol, i never go fast with any advanced steelies, LOW AND SLOW is the way to go lol,
@TheBugbugboy10 жыл бұрын
i don't run them. if a wheel manufacturer doesn't make them, i don't run them.
@AmericanThunder10 жыл бұрын
william webster You don't trust a steel wheel, but you'll trust an aluminum wheel?
@bigrhysee1210 жыл бұрын
sitting the wheel in water while you weld....luckly you didn't die and it would be better to let the wheel cool by itself you get less distortion
@TheBugbugboy10 жыл бұрын
kept the heat way down. i was young and stupid then.
@hondacoupe9411 жыл бұрын
Nice job what did use to make it wider
@Dunse888 жыл бұрын
Hi. what are the size and offset on those rims? (before custom treatment. :D) is it 14" and 25 Offset as the standard rims for the car? I just bought a Volvo 740 and can see the wheels looks damn good on your 740
@masulii8 жыл бұрын
+Daniel Tobias Nielsen They were 15" with 25 offset
@Dunse888 жыл бұрын
thank you.
@Dunse888 жыл бұрын
Great job by the way. ;)
@DizzleEk10 жыл бұрын
Damn i wish i knew somewhere in TN i could get this done!
video was interesting, but the music was making me dizzy! i got some ford steelies i need widened. is this guy in NJ by any chance?
@marcelogomezalvarez46478 жыл бұрын
Espectacular, me diste una muy buena idea para mi fiat 1500 multicarga
@rodrigochuck86337 жыл бұрын
essa pisadinha é que faz toda a diferença, haha show!
@fckNchewy11k8 жыл бұрын
Is there anyway you can do these to my steelies?
@MoeFe10 жыл бұрын
I've been looking for 16 inch steelies 5x4.25 but can't seem to decide wether or not to go hunting for them or just order online?? Ebay is ehh I don't want brand new ones and craigslist in my area is also ehh, no one has the right or enough info on the ones they post and either are not it or don't know. Cant ask them to measure it(tried it) for me but no cigar. I'm just looking for a flipped deep dish steelie. Either flip and reweld my self or buy from someone somewhere already done. Anyone????
@GreenNati0n10 жыл бұрын
This is safe just depends on if you weld it right or no
@1eldar7778 жыл бұрын
So is This Going To Save For Car ore Not ? Because i Don't
@ana771108 жыл бұрын
great job man
@masulii11 жыл бұрын
Dont know what it will cost. In finland some shop makes them about 200-300$ of set
@jeancarloelfenomeno56109 жыл бұрын
how wide is the metal that you use
@Luisgt41307 жыл бұрын
That could be done with rim aluminium?
@bunorah8 жыл бұрын
where do you get the band? do you make yourself? say out of flat sheet of metal and you roll it?
@crombez7411 жыл бұрын
what thickness is the sheetmetal you're using? how did you bend it ? not that i'm bad at tooling and machining , but i've never done it before... would tig welding work well too , i've got both but i love tig for the look of the weld sorry if my english is broken :p
@sf92619 жыл бұрын
So this is how they make those stock steelies so deep , I love the look of them , I see people doing the deep steelie look on volvos alot and I want to be one of them ,
@Codycantriforce9 жыл бұрын
check out diamond racing rims.
@sf92619 жыл бұрын
I've seen them , like its called they do look like a racing rim , I'd love to do what they did in the video and take stock steelies widen them 3" for the rear and 2" in the front , than paint em white
@Codycantriforce9 жыл бұрын
Diamonds are basically just deep dish steelies
@sf92619 жыл бұрын
Very similar to aero , I still like the look of stock steelies I guess you would call them that , oem ,