Will 33's fit!?

Рет қаралды 68,501

Phillip Morgan

6 жыл бұрын

Trying to fit 33 inch tires on Durango stock suspension.

Пікірлер: 78

@ericfranklin4117 Жыл бұрын

Looking good OG

@sam2753 5 жыл бұрын

They look great but yeah, too big for a stock suspension. But hey! If you are going in a straight line it'll be great! 😜

@mitch5077 Жыл бұрын

If you did a little cutting would they hit inside the well? I want to do that to my Dakota Sport, I think factory it sits higher.

@prestonblaineroddam7986 5 жыл бұрын

Can u fit 33s on stock suspension YES. With some metal trimming and the front bumper trimmed yes or just crank ur front keys to hav to cut less

@zeuschavarria1263 4 жыл бұрын

What did u end up doing with the stock wheels

@Chanceyflexjr. 4 жыл бұрын

Where did you get the wheels from

@johnkreiter9757 4 жыл бұрын

Crank torsion keys gain 1 to 2 inches in front

@KevinFromCalgary 4 жыл бұрын

They would certainly have a better chance of fitting if they were on rims with the proper bolt pattern, not requiring a spacer between the wheel and the hub. The OD of the tire isn't the only factor in "will it fit?"

@zmill3325 3 жыл бұрын

What lift are you gonna use and is that a 2002

@njddj8390 4 жыл бұрын

What kind of rims are those?

@seanrowland3481 2 жыл бұрын

what size are the tires already on the durango?

@TheTferrer 4 жыл бұрын

Do you still have the old tires? If so, would like to make an offer which will help with the lifting of the Durango. Thanks

@sherryhulsey3158 5 жыл бұрын

Yes you can Phillip. Take off the front bumper skirt. I realize the rt skirt looks cool but for the sake of the test, off it comes. Remove the fender flares, if possible (on the slt plus 4x4 they come off amd add 2 inches of clearance), and take off the rocker panel/side step fairing. trust me, youll want to leave those off it gives you a more visual look of ground clearance and it looks like it should have been that way fdom factory

@Stonks93 5 жыл бұрын

Sherry Hulsey thinking about taking off the fender flares and running boards off my 02. How much of a job is it to do? Barely got time to do it but I’ve seen em without the flares n steps and it looks amazing

@remier22 5 жыл бұрын

@@Stonks93 if you haven't done it yet, it's pretty straightforward for the steps, id use a cordless impact with a 3/8 socket adapter, makes it a ton easier, the fender flares on the front held in with both a fastener and double sided tape, just use fishing line and goo gone and you'll be good, the rear has plastic rivets, take a hammer and a nail and pop the center through, then all that's left is double sided tape again, and the door flare piece is just double sided, my videos show what mine looks like without flares,steps, and door trim

@Montoya1991 3 жыл бұрын

Noticed this guy bolted on the adapters/spacers with the gun, he probably had a wheel fly off by now seeing this video is at least 2 years old

@BusyBeeLeds 5 жыл бұрын

Well Daah. :) Did you try 31's?

@nathaneller251 5 жыл бұрын

31s are the factory size

@jdunn85 4 жыл бұрын

On my 2001 durango RT 5.9 I have 285/50 R20 and thats realy close to rubbing .

@robertolugo6415 2 жыл бұрын

I got some 22s you think 285 45 will just right

@3featherzthomas889 4 жыл бұрын

Damn looked dope till it started to touch

@DPRyan-vd5pp 5 жыл бұрын

Oil leak is probably a priority! Lol

@bloneyo1 5 жыл бұрын

Great Look, Just need to do a lift maybe get stronger axles.

@zeuschavarria1263 4 жыл бұрын

Do u still own them

@tylerbrooks3645 4 жыл бұрын

Where did you get the adapters?

@amcclaur80012 4 жыл бұрын

Exactly. I need to know too. Save some money on rims

@allgasnobrakes4979 4 жыл бұрын

I just put 35”s on mine with like 3 inch lift yes I had to do some cutting

@zmill3325 3 жыл бұрын

What lift did you find that fits a 2002 Durango

@aaronwalters6783 3 жыл бұрын

Scowered the internet for the last 3 months and have found 1 "lift" its just a torsion key and rear shackle kit from suspension specialists in California. I am thinking about just tightening existing torsion keys up 1 - 1 1/2 inches and maybe running 305's

@warclub2175 4 жыл бұрын

I have 33” on my Durango no problems

@goatedkota430 4 жыл бұрын

Keeswood Productions how u get em to fit

@Massachusettsmorons 4 жыл бұрын

Ran them till he either ripped his tire to shreds or ripped off anything in the way of the wheel

@joeyphillips1181 Жыл бұрын

Just put a little 2-3" lift on it and it'll be perfect

@willmeredith8173 5 жыл бұрын

Hey man question for you I just got a 2015 Dodge Ram 1500 Sport do you think if I do a 3.5 front leveling I can put 35 inch tires on a stock 20 inch rim

@Jonathan-tb6fm 5 жыл бұрын

will Meredith they will fit but you would need spacers for the stock offset.

@barbaraflores2 4 жыл бұрын

You need take running board and front bumper ok

@chinoscars5655 5 жыл бұрын

What size of tires we're they before??

@JacobEcret 5 жыл бұрын

Chino Scars 31’s come stock

@papasavage8247 5 жыл бұрын

I'm just squeezing 285/75r17s under mine temporarily or 295/75r16. Being I already have 16 inch and 15 inch rims but I cant find any 17 inch RT rims. I've got a 3 inch body on mine so it should squeeze them.

@elijahthompson1631 5 жыл бұрын

Papa Savage I have 285/75/16 on 3 inch suspension lift no rub even out bajaing

@papasavage8247 5 жыл бұрын

@@elijahthompson1631 my lift is body lift. But I would think that would make it clear better I'm not sure. I decided since the truck keeps fucking up I'm going to a bigger size anyway. I want something as close to 36x13.50r18 as possible. In metric size of course I just mean my diameter and width. I plan to run 18x12 -44s and have a very big wide squatty truck

@turboboy0 5 жыл бұрын

I liked it better with the stock wheels and mud tires.

@8pyy 5 жыл бұрын

Maybe idodnt think so

@ronaldworthy157 4 жыл бұрын

Yep !

@jessicamoreno3729 5 жыл бұрын

What size spacer are those,

@quiktv1587 5 жыл бұрын

jessica sanders looks like a 1 maybe a 1.5 inch

@NathanKirby2001 4 жыл бұрын

33s fit when I raised the torsion bars

@kobemunn6508 4 жыл бұрын

How high did you have to go? I'm looking for something subtle, just ordered 2" blocks for the rear, and am raising the torsion bars in the front, think that will be enough?

@rileybecerril7554 2 жыл бұрын

@@kobemunn6508 yes

@jldfishing6622 5 жыл бұрын

I don't know where you're at but hit me up if you want to sell them factory wheels

@damianhassel9176 6 жыл бұрын

What tires and rims are they

@davidhudson1290 2 жыл бұрын

Bigger tires r a great addition...with a lift. Old rims looked a hell of a lot better. Adapters suck.

@JacobEcret 5 жыл бұрын

I added 33’s with no problem

@vidaljuarez6791 4 ай бұрын

How did u do it? I’m sure u had to cut , but what did u cut

@JacobEcret 4 ай бұрын

@@vidaljuarez6791 this comment was a while ago, I have 3 inch lift. And I did trim the front to keep it from rubbing full lock and stuff

@dantegrise2785 5 жыл бұрын

I have an 03 RT with a 6 inch lift but wheel spacers not a way to go cause they destroy the axles bad

@Cpennington57 5 жыл бұрын

Shawn grise noted!!

@gibbles717 5 жыл бұрын

Might wanna fix that oil leak before u do anything else

@dez3174 Жыл бұрын

Does it ride good sue to wheel extensions

@dez3174 Жыл бұрын

*due

@dez3174 Жыл бұрын

Lol nvm haven’t got to end of vid🤣

@rcmc1256 4 жыл бұрын

That's when he realized he just wasted all that money

@warclub2175 4 жыл бұрын

Get some fenders man it’ll look better

@Ripsaw17 2 жыл бұрын

Rub city

@Aqua350Lt1 2 жыл бұрын

Why

@tongl274 5 жыл бұрын

Those heavier tires are gonna make the SUV ride like crap. Also, by changing the steering axis of the car, it's not gonna turn too well.

@GravelGuerrilla 4 жыл бұрын

Get a thinner tire. You don't need lateral grip in a truck

@CalebHesse01 5 жыл бұрын

Bro fix that oil leak

@argue3320 5 жыл бұрын

With big tires like that you need to lift the SUV

@Jonathan-tb6fm 5 жыл бұрын

Argue no lift kits for these :(

@bobtailsthecat 5 жыл бұрын

I agree but they don’t have suspension lifts because of the rack and pinion 😭

@prestonblaineroddam7986 5 жыл бұрын

@@bobtailsthecat um just get a 3" body lift and crank the front keys and 2" lift shackels and there's 5" to fit 36s with some trimming and spacers there ya go simple....

@bobtailsthecat 5 жыл бұрын

mersades Benz fan the proper lift would be to have a suspension lift of course it’s possible to combine those two methods for 5” ...body lifts are shit and torsion cranking fucks with the geometry of joints and axles

@prestonblaineroddam7986 5 жыл бұрын

@@bobtailsthecat not really , just needs an alignment that's it..