Will 37" Tires Fit On an XTREME RECON Jeep Wrangler?

Рет қаралды 149,058

Жыл бұрын

#dirtroadcred #jeep #jeepwrangler
Will 37" Tires Fit On an XTREME RECON Jeep Wrangler?
In this video, we'll be testing whether 37" tires will fit on an Xtreme Recon Jeep Wrangler. If you're a Jeep enthusiast, you know that getting the right tire size can make all the difference in off-roading performance. But will these large tires fit on the Xtreme Recon? We'll find out in this video. Let us know your thoughts!
“If you buy through affiliate links, we may earn commissions, which help support our channel. “
Clayton Off Road 5% Discount Code: DRC5
bit.ly/ClaytonOffroadWebsite
------------------------------------------------------------
Check out our merch!
bit.ly/DirtRoadCredWebsite
Email: matt@dirtroadcredmedia.com
Patreon: bit.ly/DRCPatreon
Instagram: @dirtroadcred
-------------------------------------------------------------
Check out our other sponsors!
Order your next under invoice Jeep here! Tell her we sent you.
Lindsey Aldridge at Dan Cummins CDJR Contact:
859-339-4862
LindseyAldridge@dancummins.com
bit.ly/DanCumminsCDJR
Best Jeep Phone Mount:
Bulletpoint Phone Mounts:
bit.ly/bulletpointmounts
Check out Under the Sun Inserts!
Use discount code DRC20 at checkout for 20% off your order!
bit.ly/UnderTheSunWebsite
Distinction Applied (Color Match Your Jeep Interior)
Tell them Dirt Road Cred sent you!
bit.ly/DistinctionAppliedWebsite

Пікірлер: 214

@DIRTROADCRED Жыл бұрын

1k likes on this video and we'll have Papa Mohl in a future video 😂

@JasonSnailer Жыл бұрын

I can only like once or else I’d be spamming the like button haha

@nasirahmad4743 10 ай бұрын

I was looking for a vid like this, adding 37 to my 2024 Rub-X, for daily driving. Answered all my questions, Thank you so much. You vids are always clear, focused, direct and FULL of detailed info... Much appreciated

@peterkemph2239 7 ай бұрын

So are you making any mods to the vehicle? I am getting a 2024 Rub X as well and like the idea of the 37" tires too

@jlautomotive6349 Жыл бұрын

Another great video!! I’ve always wondered how big you could go on a stock Jeep… this definitely helps!! Keep up the incredible work!!

@DIRTROADCRED Жыл бұрын

Thank you for watching!

@Sk8inbacon Жыл бұрын

That “crash bar” piece you referenced was put on by Jeep to prevent a tire blow out from entering the cabin of the vehicle. Gladiators after 21, I think starting with model year 22 have them as well.

@DIRTROADCRED Жыл бұрын

You’re right!

@backwoodstherapy Жыл бұрын

Good info to know. So much conflicting info out there. Some people say yes, some no. Nice to have a video showing exact problem areas. Brad from TrailRecon has a 392 XR and he had some pretty decent rubbing on it but some 0.75" puck spacers in the front solved his rubbing issues with no other mods. Still, that Willys XR looks incredible with that wheel and tire setup.

@DIRTROADCRED Жыл бұрын

Thanks for watching! Glad this helped!

@fatsaxcat Жыл бұрын

Just had to put new 31s all around on my TJ. Something about 15” wheels just looks right. When I finally get the tons and 40s though I’ll have to let you video those too. Great content as always!

@DIRTROADCRED Жыл бұрын

Thanks for watching!

@jonjalbert1922 Жыл бұрын

Love the show, keep up the good work and content. I would like for you to feature/show a walk around of a 2 door JL all done up for daily driving and some hard wheeling, I've always loved the look of a 2-door Jeep. Thanks Jon

@DIRTROADCRED Жыл бұрын

Definitely! Thanks for watching!

@peterfalkner390 Жыл бұрын

I have a 2022 JLURXR and changed the tires only to Cooper STT Pro 37” using stock Mopar rims. ZERO issues even at full flex. I do have aftermarket bumpers but that’s it.

@DIRTROADCRED Жыл бұрын

Very nice!

@RAILCON Жыл бұрын

Did you take it rock climbing ?

@spartaforever3636 Жыл бұрын

Matt, glad to see the site growing! Question that I've not seen anywhere answered: Can you put 37's on STOCK Rubicon XR wheels (will the backspacing help if you can?) Thanks!

@DIRTROADCRED Жыл бұрын

Yes you can!

@CoachHutch38 Жыл бұрын

Hey! I asked this question lol. Thanks for the great vid Matt!

@DIRTROADCRED Жыл бұрын

You did! Thanks for the good video idea!

@cliffordtracey7306 Жыл бұрын

Great Video. 37's look so Kool. I'm gonna work with you guys to mod my 33's for 35's on Brooklyn's own....6.4 Hemi, 392!!

@DIRTROADCRED Жыл бұрын

We'd love to help! Thanks for stopping by Clifford!

@johngrant1337 Жыл бұрын

Thanks for general info

@DIRTROADCRED Жыл бұрын

Thanks John!

@scottboyd8892 Жыл бұрын

That was amazing to see. Great video.

@DIRTROADCRED Жыл бұрын

Thanks Scott!

@wrangler70jkujeep74 Жыл бұрын

Big help thanks 😊👍

@DIRTROADCRED Жыл бұрын

Thanks for watching!

@MakaylaMariah Жыл бұрын

Great video! Could you do a future video on the different types of tires? From Mud to Street tires? More noise and less noise?

@DIRTROADCRED Жыл бұрын

Great suggestion!

@x3thelast Жыл бұрын

Im running 37s Cooper SST pros on Dirty life beadlocks 3.5 BS with no rubbing on a stock JLU XR. I did have to head and push in the rear plastic inner fender. Aside from that no issues.

@DIRTROADCRED Жыл бұрын

Good feedback!

@ryandeane1141 7 ай бұрын

Actually shopping for new tires for my 2020 rubicon extreme recon. Thinking 35s but after watching this I may try 37s!

@tala12 Жыл бұрын

It looks way better with bigger tire

@DIRTROADCRED Жыл бұрын

I think so too!

@GYMGUYFE 7 ай бұрын

@@DIRTROADCREDwould you go with this wheel/tire setup again? How is it on the highway and the rain? Debating these bs method beadgrips.

@ca7889 Жыл бұрын

Thumbs up to Matt coming out on a Sunday glad you could swap your dads tires, if my dad was still around, he would look at me and say when did they make tires bigger than 31's and they cost too much. lol- yeah it's been awhile-but Sundays were the days my dad and I would work on vehicles.

@DIRTROADCRED Жыл бұрын

Thanks so much for the comment, really lucky to have my dad here, I'm sure your dad is always with you in spirit!

@dannycardin8966 Жыл бұрын

Hey Mat great video thanks for taking the time show this information to us. I know you have 456 gears but are you completely happy with them running 37s on a daily driver. I would really like to know your thoughts on this. Thanks so much keep up the great work.👍🏼😊

@DIRTROADCRED Жыл бұрын

I am enjoying them I feel 4.88 or 5.13 would be a bit better for more low end power!

@dannycardin8966 Жыл бұрын

@@DIRTROADCRED thanks Matt. Have you done an episode on this yet or are you going to?

@michaelbinkley5310 Жыл бұрын

Great video… thinking dad’s Jeep needs a lift kit..!

@DIRTROADCRED Жыл бұрын

I think so too Mike!

@TolcomOhio Жыл бұрын

Hey Matt, what can you show us with the upgraded running/turn lights on the OEM fenders? I have seen them on lots of builds but can't find any information on them. What I do know is they look great! To the point I wish they would become OEM.

@DIRTROADCRED Жыл бұрын

Good idea for some future content!

@Dmh06178 Жыл бұрын

Hey nice video DRC

@DIRTROADCRED Жыл бұрын

Thanks Dawn!

@waleedobdt9940 Ай бұрын

Is it safe to axles ? Any differential issues? For jlU sahara?

@bondarchuk84 4 ай бұрын

Would a 3.5 lift avoid any cutting with these 37’s???

@dannythomas8604 6 ай бұрын

I have a Willis would have 2 inch lift if I put 37s 12 5022s will it touch!?

@tellyjones2434 7 ай бұрын

Question. How high of a lift you suggest to put my 2018 JK i got 20x10 rims on 37inch tires bro ? @Dirt

@hardlifesurvivor4404 Жыл бұрын

So daily driving would be good but for trails would rub. Does look sexy with the 37s. I have a extreme 2023 was thinking on 37s but dont wanna add a lift yet. Good to know I can do 37s with my 4:56 gears for daily driving till I decide what type of trailing I'm gonna do

@DIRTROADCRED Жыл бұрын

Glad this video helped!

@markcaruana2697 Жыл бұрын

Hey looking at rear bumpers I have it narrowed down to few looking for input. Motobilt crusher, dv8 spec series, rebel off-road summit series, metalcloak narrow or Poison Spyder bruiser. I like the look of those narrowed ones that offer corner protection and have cut outs for back up lights.

@DIRTROADCRED Жыл бұрын

Good list, I went for the motobilt and am getting them powder coated next week!

@markcaruana2697 Жыл бұрын

@@DIRTROADCRED how much to get them powder coated

@HIMcules2112 Жыл бұрын

Really enjoy my 22 Rubicon XR with Mopar 2.0 lift on 37s. Haven't stuffed em yet though

@DIRTROADCRED Жыл бұрын

Very nice!

@andrewtippitt6469 Жыл бұрын

I picked up my Willys XR on 3/2. I've commented before on some of the reasons I went with the XR but I was happy with my Sport on 33s. I didn't necessarily need or even want 35s but the price is hard to argue with. Still drove out of the garage on 3/4 walked around the Jeep and thought "I could fit 37s" WTH... 35s are staying

@DIRTROADCRED Жыл бұрын

Yup they will fit, just won't flex as well!

@justinjakub7252 Жыл бұрын

Matt, Did you add any front bump stop to your Jeep with the Clayton kit? While you sit taller to start I was wondering if you could still stuff your front tire up as far as your dads will go and therefore find yourself with the same clearance challenges your dad has with the back side of that front inner fender?

@DIRTROADCRED Жыл бұрын

I did not, waiting to really flex it and see how it goes!

@ryanh1444 Жыл бұрын

Looks great!

@DIRTROADCRED Жыл бұрын

THX

@thisballcaplife9696 Жыл бұрын

Good vlog!

@DIRTROADCRED Жыл бұрын

Thank you!

@leechavero7770 Жыл бұрын

Would be a perfect setup for my high tide with the extreme setup as the only wheeling I do is just cruzing out to the beach {south padre island to east cut in south texas)

@DIRTROADCRED Жыл бұрын

Nice! love the high tide package

@rockdwg Жыл бұрын

this is exactly what i was wondering the other day thanks so much for the info. just curious how was it to drive around? did it seem under powered then?

@DIRTROADCRED Жыл бұрын

Didn't get to drive it too much to really test it out. Should we do a driving test?

@rockdwg Жыл бұрын

@@DIRTROADCRED that would be awesome if you could with the 37” Thinking that I going to be ordering a hightide in April if it still available? I was really curious how it would be driving around town and down the highway with the 4.56 gears an 37” inch tires Thank you for the great show

@hiepmap21 6 ай бұрын

Hi , I have rubicon recon 2020 with 33" . If i want to upgrade to 35 " . What do i need ? I first time drive jeep so i dont know . Can you help me ?

@ajeliasiv Жыл бұрын

So I have the high tide. I put the teraflex 1.5 lift spacers and the jks rear 2” bump stop pads on to make sure I have enough clearance. I went with the smaller 37s being the ko2 load range c to save in weight. And also the fox 2.0 shocks. I recalibrated with the ecri. My Jeep rides great. But I did find out that I’ll need longer sway bar end links. Otherwise the front geometry is off and the rear sway bar literally hits my shocks at full droop. My biggest complaint is that even with the 4.56 gears, my Jeep is constantly jumping out of 8th gear on the expressway. Anything 65-70 and above, if you sneeze wrong it will downshift. And that’s with it calibrated perfectly speed wise. I’m weighing between suspending another 400 to get new endlinks including the jks flex connects or just ripping everything back off and going back to the stock 35s. I would love anyone’s input. Oh and by the way, the 37 ko2 load c tires get their weight saving by making them drastically skinnier than they advertise. My stock 315 35s are way wider.

@DIRTROADCRED Жыл бұрын

That's interesting!

@jpdrummer86 Жыл бұрын

That’s because you’re also under powered, you need 5.16 gears for 37’s, unless you have diesel, 392, or 4XE to make up with the extra torque, you need taller gears.

@alfa8822 6 ай бұрын

Why does it look at has more clearance on Ryan’s jeep than your dad‘s extreme recon? Do you know if the Rubicon extreme recon has the same lift as a willies extreme recon?

@randymelder Жыл бұрын

Can you do a video on ride quality tire pressures for street vs trail ?

@DIRTROADCRED Жыл бұрын

Great idea!

@michaelmcmullen2397 Жыл бұрын

Would adding a "leveling kit" spacer style keep the 37s from rubbing on the extreme recon willys (dad's rig)?

@DIRTROADCRED Жыл бұрын

It should yes, still might rub at full flex!

@boldrbangr9834 Жыл бұрын

Great info! I've got a 2020 JLUR with 37's, steel F bumper with the ends removed & the MOPAR lift. No rubbing around town & none for mild wheeling. Does anyone know if the XR lift is more or less than the MOPAR?

@DIRTROADCRED Жыл бұрын

Good comment, the XR kit is shorter than the mopar, the mopar is closer to a 3 inch!

@LejeuneFireMedic Жыл бұрын

“Asking for a friend”. I just want to level out the front end of my 23 with the XR package. It already sits low in the front and will only look worse with the installation of any winch. Any suggestions? This video definitely answers some of my questions! Much appreciated. 🤘

@trevallionjones8527 Жыл бұрын

I added 3/4” spacers on my 21 XR after I added a bumper and winch to level it out. Sits nice but the extended stock bump stops do not allow enough up travel.

@DIRTROADCRED Жыл бұрын

Coil spacer will work well, either 1/2 inch without winch, or 3/4 with a winch!

@sellickusa Жыл бұрын

37s fit my Mojave straight out the gate

@DIRTROADCRED Жыл бұрын

Thats awesome!

@AZOVRLND Жыл бұрын

35x12.5x17 is the biggest I go on our rubicon’s due to being trail and weekly drivers.

@DIRTROADCRED Жыл бұрын

Thats a good size!

@JasonWendling Жыл бұрын

Can you explain what the differences are in the Rubicon / XR / standard fenders are? I have the Rubicon XR and want to switch to color-matched painted fenders but don't know if this has any mechanical or safety impact.

@GaryGill786 Жыл бұрын

Hi Jason You mean ….Rubicon high line colour matched flares ….

@andrewtippitt6469 Жыл бұрын

The Willys come standard with Sport flares. The Willys XR upgrades the flares to the Rubicon highline flares. The Rubicon gets the same flares for the Rubicon and the XR so swapping to painted won't be an issue.

@DIRTROADCRED Жыл бұрын

They will fit the same, just will be paintable!

@paulredding1105 Жыл бұрын

Do you happen to know the parts for the XR kit? Also, how is the tuner still going with the 37’s? I’m trying convince the wife to get the wife to get the tuner.

@DIRTROADCRED Жыл бұрын

There is a list on the JL Wrangler Forum, the tuner is doing well!

@adamwagner4567 Жыл бұрын

do you need a reinforce tailgate bracket for a 35 inch tire or stock?

@DIRTROADCRED Жыл бұрын

The 35 does fine, 37 with a beadlock is a bit heavy for it!

@JeepWhealen Жыл бұрын

Would you say a 1” spacer puck would help the clearance of the 37’s and be okay for off road use?

@DIRTROADCRED Жыл бұрын

It would help, a fender chop would help more!

@Theonlyian Жыл бұрын

think this set up would work on my 2020 rubi recon stock ? Was wondering how your Dads Willys compares to my Recon?

@DIRTROADCRED Жыл бұрын

We might have to test it..

@macmchenry3771 Жыл бұрын

Bring Dad on the channel!!!!

@DIRTROADCRED Жыл бұрын

I agree!

@RAILCON Жыл бұрын

Will 37’s fit on JLURXR without rubbing at full flex ? Especially with sway bar disconnected and wheeling on rocks

@DIRTROADCRED Жыл бұрын

Yes it will rub

@Avidav Жыл бұрын

1,000 like gang, I'm here for it.

@DIRTROADCRED Жыл бұрын

HERE WE GO!

@Avidav Жыл бұрын

@@DIRTROADCREDgoal met 😂 waiting for dad video 😊

@timothyreents9826 6 ай бұрын

Show Ryan's Jeep with the 37's. Thanks for the video.

@DIRTROADCRED 6 ай бұрын

Coming soon!

@joshgarcia7148 Жыл бұрын

So a two inch spring spacer and you have a stock quality ride and 37s. sweet!

@DIRTROADCRED Жыл бұрын

👍👍👍

@oscrm1760 Жыл бұрын

Cuantas pulgadas es decir lift tiene el Rubicon vs Rubicon xtreme Recon de altura .

@DIRTROADCRED Жыл бұрын

It’s about 2 inches taller!

@msains 11 ай бұрын

Hey Matt, great video 👍. May I know if that willy came with the high fender flares or you have done some mods on it? I really want the oem fenders a bit higher on my JLS

@DIRTROADCRED 11 ай бұрын

Yes it came with them!

@aarongerman7857 Жыл бұрын

if you went 37" KO2...would be perfect they're notoriously smaller

@DIRTROADCRED Жыл бұрын

Well said

@MicahGilmman Жыл бұрын

I'm about to buy my first Jeep and am planning to buy the new High Tide model. Do you think it would be possible to fit 37's on there once my 35's eventually wear out. And is there anything you would recommend doing just to make sure they fit on there better? I think the 37's look great on there so wouldn't want to change that look too much. Thanks!

@DIRTROADCRED 11 ай бұрын

Absolutely

@MicahGilmman 10 ай бұрын

@@DIRTROADCRED Thanks for the reply! This is helpful to know.

@MrTwisting Жыл бұрын

Hey Matt I’m getting the 3.5 Clayton Overland+ package installed on my 23 392 tomorrow! Do you know if I will have to change wheels to run 37’s?

@DIRTROADCRED Жыл бұрын

Very nice Dustin, good to see you here, do you have the XR? If so then you'll be fine, if not I'd look into more backspace!

@MrTwisting Жыл бұрын

@@DIRTROADCRED yes I have the XR 392. I had to get it after my wife stole the 22 blue Rubicon you sold me.

@JeepYotaAdventure 10 ай бұрын

@@MrTwistingCan you give an update on your 3.5" Clayton Lift? Did you try 37's on stock XR wheels? Tire choice? Thanks!!

@luar335 2 ай бұрын

Factory suspension???

@AteTreeWon Жыл бұрын

Haha 1,000 likes easy!!! Can’t wait to see him on!

@DIRTROADCRED Жыл бұрын

Lets get there!

@samirleveque4782 Жыл бұрын

I have a 2022 XR392 can I get the same Wheels and tire set up you have since u don't have the xr

@DIRTROADCRED Жыл бұрын

My jeep has the XR! We just added a 3.5” lift kit.

@JendellOverland Жыл бұрын

I would like to see this same test done on a Rubicon version of the Extreme Recon. Cusious if the results would change.

@jvallager Жыл бұрын

It would be the exact same setup

@JendellOverland Жыл бұрын

@jvallager would it though?

@DIRTROADCRED Жыл бұрын

Same suspension and fender flares so basically the same set up except sway bar disconnect

@tomahawkchop7669 10 ай бұрын

Is the 2024 Rubicon 35" tire package come lifted from the factory? I went to a dealership and they could not tell me.

@DIRTROADCRED 10 ай бұрын

If you get the XR yes

@tomahawkchop7669 10 ай бұрын

@@DIRTROADCRED mmmmmmm... I placed the order for the Rubicon so I could pick the package groups I wanted instead of the Rubicon X. But they had the 35" tire package so I got that. I'm hoping for the best as the salesman was not very informed. I test drove a 2023 Hightide that had the 35" tires to test the ride quality and I am hoping it is lifted like that

@TheBerkeleyBeauty Жыл бұрын

Your dad’s a real good sport.

@DIRTROADCRED Жыл бұрын

LOL yes he is!

@GaryGill786 Жыл бұрын

Hi buddy great information….. could you please please provide me full detail of this “high velocity “ Jeep …. Lift kit … model number , size , brand name please and The tire brand name and full size please Also what else do I need to install or change with this lift kit please God bless you

@DIRTROADCRED Жыл бұрын

Check out some of the previous videos! 2022 XR Rubicon 3.5 Clayton Kit 37s and KMC wheels!

@mattdisher9521 Жыл бұрын

What about 37’s on the stock recon wheels? Does someone make one? Will they still fit with that backspacing

@DIRTROADCRED Жыл бұрын

Yes they will fit on the recon wheels fine!

@mattdisher9521 Жыл бұрын

Perfect glad to hear. I like the recon wheels and would prefer to not replace them when I go to 37’s

@mikesters3532 Жыл бұрын

Lift needed for 37’s to do it correctly, the end.

@DIRTROADCRED Жыл бұрын

YUP!

@eng16ine30 Жыл бұрын

The XR rims have a pos 4 mm offset

@DIRTROADCRED Жыл бұрын

Correct!

@Zebraunit22 Жыл бұрын

Fyi, never put the lug nuts on the drill and then screw them in. Always start them first then use the drill next. You really risk cross threading and damaging it to where you won’t be able to put the lug nut on. Just an fyi

@DIRTROADCRED Жыл бұрын

Good FYI

@brianfank4634 Жыл бұрын

We want Dad on here lol

@DIRTROADCRED Жыл бұрын

He's gonna be thrilled when this hits 1k lol

@brianfank4634 Жыл бұрын

How many are you at ?

@BIG570S Жыл бұрын

Those 37” tires probably work better on the factory XR wheels…

@DIRTROADCRED Жыл бұрын

Ehh they would work, I don't think they would be better.

@BIG570S Жыл бұрын

@@DIRTROADCRED In my experience with many trucks and Jeeps, when you mount a larger tire on a lower offset wheel you get tire closer to the bumper and rear of the wheel well because it has a wider sweep as you’re turning the wheels. The only clearance issue I’ve ever run into on stock wheels are the inner tire sidewall on things like sway bar and control arms…Usually much better clearance at the bumper and rear wheel well on a stock offset wheel, too bad you weren’t able to try that and really see for sure. I might have to try on my new ‘23 XR Rubicon on stock wheels.

@soldier42mp92 Жыл бұрын

Beadlocks are not a option for me unfortunately laws here in central, South Jersey to include surrounding states have gotten strict not to mention most if not all capable shops won’t risk it or the buddy shops won’t balance them even simulated beads like methods or even MT classic Baja 😂

@DIRTROADCRED Жыл бұрын

Very good call!

@phroug2 Жыл бұрын

Bro u need to start threading those lugs on by hand for a couple turns. If you keep slamming them on with an impact like that, youre going to crossthread them. Only a matter of time.

@DIRTROADCRED Жыл бұрын

I know, this is my bad, one of these days it will get me

@androdiehl6596 Жыл бұрын

It's a willys or a rubicon?

@DIRTROADCRED Жыл бұрын

Gobi is a Willy’s XR, HV yellow is a rubicon

@ajclark26 Жыл бұрын

Yes it does but it will rub when you’re flexing. So if you’re mall crawling it you’re good 🤣

@DIRTROADCRED Жыл бұрын

LOL exactly!

@raycobra6078 Жыл бұрын

Did he just put the nuts with the impact?

@DIRTROADCRED Жыл бұрын

😆

@kenwilliams4086 Жыл бұрын

I prefer the looks of the 35's on your dad's Willis.

@DIRTROADCRED Жыл бұрын

He prefers those too!

@TwistedOff Жыл бұрын

👍

@DIRTROADCRED Жыл бұрын

Thanks!

@Ken-qq6gp 9 ай бұрын

Definitely need a lift

@DIRTROADCRED 9 ай бұрын

Definitely

@Arid379 Жыл бұрын

Its too big. How big are tires going to be in the year 2030?

@DIRTROADCRED Жыл бұрын

50 inch! Lol

@GoXplr Жыл бұрын

Looks good. Im like #484 .... 😀

@DIRTROADCRED Жыл бұрын

Closer and closer!

@adeelio 5 ай бұрын

Definitely don't try 37x13.5

@jimpaine7455 11 ай бұрын

Why ?

@DIRTROADCRED 11 ай бұрын

Why not?

@mnmz6934 Жыл бұрын

did my comment get deleted?!

@mnmz6934 Жыл бұрын

wow, keep deleting my comment...at least let me know why wtf lol

@DIRTROADCRED Жыл бұрын

What comment was it?

@mnmz6934 Жыл бұрын

@@DIRTROADCRED deleted again.....what happened to freedom of speech? Stop shadow deleting my comment. If you don't like what I commented, let me know then.

@mstone6210 Жыл бұрын

My 97 with a 4" lift rubs with 35s so who cares. roll it like you stole it. Have fun!

@DIRTROADCRED Жыл бұрын

haha nice!

@shrimplypibbles2949 Жыл бұрын

Wheres the steps , was it just a sales video ?

@attnielthomas7856 Жыл бұрын

Sir/ Ma'am, the step bars went on his Jeep (the yellow) if memory serves.

@DIRTROADCRED Жыл бұрын

Not a sales video, dad wanted them on his so I donated them to his build, I think I need something a little more high tuck

@Mlooong Жыл бұрын

I want your dads jeep

@DIRTROADCRED Жыл бұрын

It is awesome!

@robertkeeler6211 Жыл бұрын

#likefordad

@DIRTROADCRED Жыл бұрын

1000 here we come!

@frankcastle9691 Жыл бұрын

You cant run 37s without major modifications.

@DIRTROADCRED 11 ай бұрын

They will clear, just won’t flex as well

@frankcastle9691 11 ай бұрын

@@DIRTROADCRED it's not just about clearing the fenders.

@JeepYotaAdventure 10 ай бұрын

@@frankcastle9691Godspeed ZRZ channel runs 38x15.50 on 20x12 wheels with -44 offset on a stock JL392. No Lift. No spacers. Does hard-core offroading. Now go tell him he can't run 38's...😂

@frankcastle9691 10 ай бұрын

@JeepYotaAdventure I'm pretty sure the 392 has better parts than the V6. Also it comes with a 2.5 in fox lift. In a non 392 jeep if you run 37s or bigger there's a chance you could bend or brake something.

@attnielthomas7856 Жыл бұрын

Helping you get to 1K "like." Number 231 if want to know.

@DIRTROADCRED Жыл бұрын

Hope we get there too!

@Bob-tn5xn Жыл бұрын

Sorry charlie it's not a Willy's never has been never will be ! Best mod right out of the gate would be to remove the Willy's stickers from that jeep and let it live it's own life and not rob from the legendary jeeps that came before ! At least it isn't the one that says MB ! That's as bad as a sixteen year old kid wearing a ww2 veteran hat

@DIRTROADCRED Жыл бұрын

Still glad Jeep keeps the Willys name around to pay homage to the original.

@chaseme9860 Жыл бұрын

Vehicle on jack stands in the street = Redneck

@DIRTROADCRED Жыл бұрын

Imagine if I left them like that for a few months....

@vicranger6876 Жыл бұрын

35” good enough and that little bitty v6 can almost move the jeep along. If jeep mgt had any brains whatsoever , the Hurricane straight 6 twin turbo 500hp would be the smallest option for engines. Of course Jeep mgt has zero brain power so Hurricane isn’t in anything jeep but some crap like the suv junk and of course the Chrysler trucks. Go figure

@DIRTROADCRED Жыл бұрын

Valid points!