▶️Watch part 1 here: kzfaq.info/get/bejne/rcWaadxlu8WRg5c.html

With as much as you guys do this, you should consider a battery caddy. I would build a cart with some wheels and welding cables with eye bolts so you can bolt direct to the starter. Big enough for 4 batteries would let you put two (low amp) into the chasis.

Just get it started, I pulled a rice cart in the rice fields when I was 15 years old and making 16.00 per day, back in 1978! That Steiger was a badass tractor backyard in the day! 👌🏻🤙🏻🤙🏻

Thanks Hank and Wiley for a great job best entertainment I've seen all day thanks again

Awesome to see you two give it another shot! These old tractors are sick! Thanks for another awesome video and God bless

Hank you Guy's are the best, that was great, I smiled when I seen that baby crank. Great video as always!

The old big tractors are great no computers either. I'm enjoying your vids guys.

Hank, y'all know we all ❤️ you, but put a leash on Willie sos he don't get away. Y'all are perfectly matched and fun teasing between you two cracks me up. It's like working with my buddies, we tease.👍👍👍👍

You two are closer to being mechanics than singers. 😁 Keep the great videos coming. God bless you!

I just watched the Inmate interview with Doug Steiger this morning, it's a really good story. Good vid again guys.

Thats awesome guy's, never thought,after part 1, that the old beast would crank

I love watching you guys bring back old motors to life. I am an old sailor from the early 70's. Thanks

She was being stubborn but in the end she was makin oil and decided to cooperate. Well done fellas

Well done what a result and no baby birds were harmed in the making of this film 👍👍👍

i got a tip for you when using ether on a diesel crank the engine over first then spray it in the intake. if you look when you where trying to start it around 19 minuets you can see the fan turning the wrong way against the starter. thats because the ether combusted but it combusted before tdc forcing the engine the wrong way. when you crank the engine over first then spray it the waght of the flywheel helps the starter overcome the pressure of the ether pushing the engine the wrong way.

What a Machine!! That was a ton of fun!

Hank you and Whilley never give up that was a runner and it ran that was fantastic that was a combat engine more blood coming from you guys then it was running but you beat him and it ran the birds were safe in the making of this video great job guys and made my day.

Sweet music when she finally came back to life great job 👌

no matter what vehicle or how old it is you still manage to start you guys are awesome keep up the good work👍👍👍👍👍👍👍👍❤

I sure enjoy watching and listening to you lads bringing old iron back to life. Would like to see it up and working again when that happens if you can.

Man yeah!! Probably the best video yet. You guys are great an God bless you both.

Good job Hank and Wiley I would say ole sparky but that's the electric chair lol you guys got this running with a bird nest in the disconnected exhaust lol awesome farm find. Shows you never know whatcha gonna find doing these things 👍🤣😂

Well done guys and thank you for trying again to start this tractor and taking us along on this journey, God Bless! 🙂

Man I love y'all's adventures. I man can tell when two fellas are cut from the same cloth you and Wylie are like two 50 series batteries in a diesel soaked battery box. Hooked up parallel. Love y'all. Thanks for sharing y'all's adventures.

I giggled for 3 minutes after the “I thought you were crazy…” comment, once it sunk in! 🤣

Always enjoyable watching you two getting stuck in starting all these equipment. The banter between you guys makes it better to watch lol. Cheers gents from down under

There might be a clod of soil down at the bottom of the flywheel that was holding it solid, after you showed us the flywheel teeth all plugged up with dirt, that gave me that idea. Didn't know you had a mule kick Hank, that was pretty good! Might have to look for another intake boot for the customer now, but I have faith in you 🙂

You two guys (the Dynamic Duo) are simply amazing. I must confess, I really didn't think you were going to get it running. Enjoyed as always.

You remind me of my mom from Tennessee.... One day I was listening to House of the rising sun by The animals their version Eric burdon..... When my mom comes in singing it.... And I said I didn't know you liked rock and roll.....she said do you think that is the first time that songs ever been done..... and she starts telling me all the different versions of it all the way back to the 1800s... Hank Williams..

I’m sure you fellers have gotten comments about this but if you get some trans fluid into the cylinders and let it sit for a bit it will break lose easier and do less damage to the cylinder walls when it finally does break lose. But I’m loving these videos none the less.

I came for the tractor repairing and stayed for the singing and good natured banter. Nice job.

I saw the donkey kick going like that from a mile away and that somehow made it even more funny

Lol the donkey kick

Load up that turbo with penetrating oil through the oil line connection and you might be able to save it. It didn't look sloppy in the video, just hard to turn. Anyway great job on it!

This was a other great video I love all you're video and can't wait every week to see one ❤️ and still be amazed how you can get it to run only the singing this time was a extra bonus but you're are great mechanics God bless Thanks for this entertainment

Great job that you could bring that old steiger back to life so it can be saved . It wouldnt take much to make it a working tractor again and its cheap power in this day and age

love your videos out here in california. sounds like you got a good group of guys. god bless you all.

Wow. Thanks for another super super video. Most interesting and enjoyable. Wow and wow and wow. You two worked really hard getting this one going. It was stubborn but in the end you two got it going. Glad the motor will have a second life. Hats off to Hank and Wiley and your friend that came to help. My compliments to all of you. Good job done. You both take care and be safe. Looking forward to the next video. Thanks for everything. Retired Air Force veteran. Steve.

Looks like an MT40 starter...i have some very painful memories of changing one of those out in single digit temps. My hands hurt just thinking about it

Good stuff. Man do power tools make life so much easier

that was one of the best will it starts ive ever seen keep up the great work guys

Calling someone stupid is one thing but saying you can see their nuts is a worry bro. Hay great video as always guys. Safe travels

My goodness, you guys sure manage to get a variety of older machines running. Sometimes with just a little TLC us old folks can do it like in the good ole days.

Well done chaps I did not think it would run

That was one of the more difficult jobs. Good going!

Leverage is our friend. one of the first lessons as a mechanic.

Damn that was cool!! I was sad when you guys found it stuck in the first video. I love those old tractors!!

Glad you got it fired up. Somewhere there is a stuck Farmall that needs pulled out.

That engine, and most other engines spin clockwise when looking at the pulley end of the crankshaft. Some Honda, and several marine specialty engines are the beginning of the exceptions. The flywheel housing of that Cummins will have a covered hole where you can insert an engine turning tool that a person would us a breaker bar or ratchet on. The bell housing full of dirt is a partial indication that the inspection cover at the bottom was left off, which allows the spinning clutch to act like a vacuum cleaner while the engine is running. This leads to not being able to adjust the clutch for wear, and I promise that that one has a bad case of stuckage. I’m not talking about the discs stuck to the pressure plate and flywheel, and there may be a large dose of that too. I remember when tractors like that were common to a few of our neighbor farmers when I was younger, and the few new ones at the dealers. New starter? Delco Remy 8200308 gear reduction and lighter than the steel 42MT that came out.

Great job, you got that engine going. This was a pretty tough one. The battery set up was perfect, love it ! That starter solenoid needs some cleaning and bit of lube so it doesn't get stuck.

Hank and Wiley sings. I would buy that album for a buck! 😆 Keep up the fun times, guys!

Man you guy's are just getting too professional now , great job 👍👍🇺🇸

Those green Steigers are some of the best tractors ever built, Imagine the codes a red Steiger would throw if you tried to start one like this :D The Green ones were from a better time, when the engineers were in charge, not the accountants :( Also I don't care what the salesmen say, I reckon a 525 Tiger would pull a 600 QuadTrack backwards, especially with modern Tyres, all without needing 15 software updates and 10 annual subscriptions to login and start it :P

“Learned this in my jui-jitsu class” best part 🤣

9:56 The pulley is a much shorter radius from the rotational center of the pulley's shaft so you won't notice movement as much as you do from the end of the long fan blade. The difference in arc length of 1 degree of movement at 1" from the center of the shaft versus 24" from the center of the shaft is 24x...

3:59…Hank, good luck at the All Valley Karate Tournament. You are ready to defeat Johnny Lawrence! Another great video. Really appreciate these

FORGET alternator belts, the RATS in the bell housing are pushing the flywheel opposite your direction everytime they see the bar slide in where you took a chunk of their roof out.

Hank you and Will never stop amazing me, love watching the equipment come to life, or back to life. Keep it going.

Love to see you guys coming back on this piece of fine machinery

Wow great job guys getting that thing unstuck and running and it runs ok again nice work fellas and God Bless....

I love reserecting old dinosaurs

That was entertaining! I laughed with you guys through the first half of the video. 👍🏼😆🤣

Wild old rig, all the best to yous and your loved ones

Great job getting it broke loose take care and God bless

What is going one there? I don't recall Wylie ever getting musical before! Hank the 'I used to think you was crazy' joke was worth a chuckle!

Great video always excited to see you two working together

Glad to see it up running again must b the most difficult 1 to get going as yet Well done guys keep up the good work

Great show good music great people thank you Hank and Wiley have a great weekend

Love watching these videos. a great job yall, thanks for bringing us along this journey again.

Pulling so much current it's flexing the battery cables

That engine had two beavers and a chipmunk living in It.

I couldn't contain my laughing when your foot went through that turbo pipe 🤣 thank you sir I needed that today!

Excellent video Hank :) & Wiley :) and it alive and well to for sure possible but working on farm soon to!

LMAO, and I thought my mind was twisted. Love the nuts joke. Keep up the great work

I learned you always bleed the lines cause there’s always air in it after it’s so so long.

The most fun a fella can have!! Still the best content, always makes my day! A dedicated follower.

At 6:04, Hank demonstrates proper "Shade tree mechanicin'" YESSSSS! Hey, ya gotta know how to do it! Be as comfortable as you can in difficult spaces :)) Mechanical design that just doesn't make good sense: "Engineer stuff" - Wiley!!! "IT'S ALIVE" - Dr. Hankinstein with the help of his trusty companion Wileygor

Awesome to hear that beast fire up! Keep up the awesome work guys!

That's a mean lope,badass as always hank my man!!!!

Crack the drain plug and check for coolant. ,Turn the engine by the acce as sorry drive...

Great video hank and whiley great to see the engine going great fun to watching cheers you guys can't wait to see next adventure what happens

The air intake is like thatto keep it away from the exaust, that way it dont suck in its own exaust fumes.

I bet those birds were freaking out when it finally started!!! 🤣🤣

“We’re gonna make it an electric fuel pump” on an old Cummins with a PT injection pump 🤣

Thanks for showing I have done that stuff and it’s a ton of work and trying to get a video angle no thanks good job

Excelleny video I enjoyed watching it i need a big tractor like that to push canetrucks in 🇧🇿 Belize

For you guys that Marvel mystery oil. would be cheaper by the gallons for y'all right? I would just add on A rubberized replacement breather tube.,or get the dimenations of it length.& width size wise. Then one can be made out of fiber glass again. Customized to fit that engine.

Love Wiley's T shirt.Making oil 🛢 😍 👌

years ago marvel mystery oil made a oiler that was automatic injection for engines i bought one about 30 years ago was cleaning up in the shop found it still in the box never used had been open but never installed. i have a 1966 D500 Holmes Wrecker with only 50,000 original miles on it thinking about installing it on the wrecker thought that would be cool very few people have ever seen them i have only seen 1 or 2 in my life and i am 65

Nice start for the old beast that is impressive 😄😎

Awesome video, that's awesome it finally cranked up and it sounds good!

If y’all came to Washington I got some stuff you could tinker with, there’s also a giant excavator that’s been sitting for about 10+ years

Good job guys you worked hard on this will it start really enjoyed this video appreciate them a lot 👍

Need a longer pipe there laddie!!!! We had a 6' pipe that we used when we were doing suspension work on the big trucks.....lol

Brilliant job lads got there in the end 👍

Great video lads ,the beast is alive.!

Wiley time to get away from him.... He's looking at your nuts...

Hi from uk guys👋👍 man o man guys this one was the funniest session in a long time 😂😂 but what the hell did I just witness🤔 live wires, shorts, fire, and the birds in the stack😂 I thought was a belt squeal but wen you poked into stack and they looked up as if to so ""do you mind🤔😂"" excellent work and a very impressive effort on this one gents 👌👍 thanks for your time and be safe see you soon guys👍👋

good evening gents, that magic oil is too expensive to waste, you need to get it in the cylinders [injectors out] , not just filling the sump with it, which probably do more harm than good. seriously impressed with the kung-fu kick mind.....

Loving the videos I have been watching all of the will it start videos LOVE them all keep up the amazing KZfaq videos!