WARNING: DO NOT WORK WITH CORROSIVE CHEMICALS OR POWER SUPPLIES UNLESS YOU ARE TRAINED IN THE CORRECT SAFETY PRECAUTIONS. ALSO... It's July of 2024 and DaVinci Resolve STILL doesn't have a spell-check feature in their text generator... so reply to this comment with your favorite typo!
@iiidiyАй бұрын
13:17 - "Techknight"
@iiidiyАй бұрын
23:51 - "Techknight"
@iiidiyАй бұрын
24:45 - "THETechknight"
@iiidiyАй бұрын
13:21 - "Confirm" (singular)
@ReallyBadJuJuАй бұрын
4:30 - "supporing"
@BigBadBenchАй бұрын
I like that you drive with your gloves on.
@iiidiyАй бұрын
Wait, wait... you DON'T?!
@BilisNegraАй бұрын
Many people, me for one, don't feel comfortable appearing on camera, but this is a whole new level.
@mattyb33tsАй бұрын
Absolutely amazing. The amount of work... incredible. The actual repair & attention to detail is one thing, but doing all of that AND having great camera work... mad skills. Proud to be a supporter.
@iiidiyАй бұрын
Thanks Matty! Are you M.B. from Patreon? If so, I'll drop you a message sometime to nerd-out about JBL speakers & audio :)
@mac27collectionАй бұрын
What a gnarly project this one turned out to be; can't wait to see that board running again!
@brianclimbs1509Ай бұрын
Man, I could really feel your pain in this one... But you are also doing an amazing job documenting this process for other people who attempt such a restoration in the future. I truly applaud you for your herculean efforts here, and I'm really glad that you have people supporting you in this journey!
@iiidiyАй бұрын
Thank you, very kind of you to say :)
@homeforobsoletetechnologyАй бұрын
Seeing this project coming to a disappointing end like this hurts. You have my full respect for continuing for so long! I wish you all the best and sincerely hope the PC comes back to life eventually
@bakkus82Ай бұрын
Brutal! And as usual, a _perfectly_ put-together and composed video. This is the shadow side of this hobby - the stuff that just does not work, no matter how much we hack at it. Just realized I'm not on your patreon, so that's fixed now
@iiidiyАй бұрын
Thank you for the empathy, encouragement, AND support over on Patreon!! ❤️
@beerdiaryshootinmcdaniel8063Ай бұрын
we tossed a performa 575 years ago. was my personal one back in 1993 or 1994 maybe 95. Loved that thing, took it to a repair guy who couldnt fix it. Wish i still had it.
@kirbyyashaАй бұрын
Poor Macintosh. I can totally feel your frustration there. You lasted longer than I would have.
@LeSpameurYTАй бұрын
Congratulations for all this work, it’s just crazy ! An excellent video once again ;)
@iiidiyАй бұрын
Thanks, glad it was fun to watch, despite the end result! ;)
@MikesArcadeMonitorRepairАй бұрын
Good lord! What a mess. Great job with the perseverance. Will be patiently waiting on the update.
@sim61642Ай бұрын
The LC575 Looks like some kind of retro robot dog thats been told to sit and is looking at you expectingly.
@newportshapwickАй бұрын
Keep at it! A long, long time ago when all ic were dip packaged, I had a board which ran fine and then a while later, stop. It was a big densely packed board and it took me weeks to find the fault which turned out to be one leg of an i.c. was bent up under itself and to all appearances looked absolutely fine as if it was just a normal pin through the board, but once the board had warmed up, the leg/package acted like a thermostat and lifted the leg off the pad!
@iiidiyАй бұрын
Oh my goodness! That fault would drive me crazy! Haha
@JamiesHackShackАй бұрын
Wow! Way to not give up on it! Beautifully done video. Enjoyed it very much and excited to see what happens next with this system.
@iiidiyАй бұрын
Thank you! I'm excited too - the board will be in good hands :)
@JeffGeerlingАй бұрын
Is this video the beginnings of a Mac84 workshop setup with piles of old Macs covering every surface and test equipment buried in the rubble?
@iiidiyАй бұрын
Hah, with all the love and respect to Mac84, I hope not! :)
@DavidPlassАй бұрын
I think many of us have "been there, done that". I hope you get some resolution soon, and you can finish this project.
@BeniD82Ай бұрын
These are all learning experiences, as frustrating as they may be. Might be a good thing for you to put everything away for a little while and then pick back up when you've recovered some. I can definitely relate to that frustration :) You've done a great job so far, and I'm sure your tenacity will pay off, at the very least once you hear the successful startup chime :) Keep at it!
@iiidiyАй бұрын
Thanks for the encouragement! :)
@rlima81Ай бұрын
You have some nice retro computers there! Keep up the good work this video was awesome to watch
@iiidiyАй бұрын
Thank you!
@jonathanhalewood5902Ай бұрын
Don't be too discouraged - sometimes things don't go well, and it's absolutely not a reflection of your efforts! Part of being good at this sort of stuff is to know when to walk away and take a break from a project!
@iiidiyАй бұрын
So true, thank you!
@jryankennedy12Ай бұрын
The care and attention you put into these videos **chef's kiss.** Just subscribed to your Patreon.
@iiidiyАй бұрын
Wow, thank you for the kind words AND joining the club! :) Much appreciated!
@toddholcomb1Ай бұрын
Helluva effort!
@InitialiseDiskАй бұрын
Multiple failures are the absolute worst. You fix one thing and realise that nothing has changed or (happens a lot to me) you realise you’ve actually made it worst. Btw I’m really impressed with how much equipment you have. I’m still debating whether or not I want to buy to buy a plastic crate for retrobright. I really hope you get this fixed as you’ve put so much time and effort in it would be a real bummer if it doesn’t work. Good luck!
@iiidiyАй бұрын
Thanks ID! I've definitely gotten carried away with the tools (toys) this year... gonna have to cool it for a while :)
@sandycheeks7865Ай бұрын
I’ve worked on a lot of 80s and 90s macs. Whilst I want boards to live, and the 575 is worth a lot to collectors, that board was too far gone. All that corrosion will be under every chip, inside every trace, and it’s effectively riddled with stage 3 cancer. You can’t take eggs out of a baked cake. I’ve also suffered from spending too much time time on stuff like this and it really can affect your mental health. You have to compartmentalise, take away what you learned (including ‘never again will in travel this road’) and at worst, junk/give away those parts so that other machines will live. Run it with a CC board until a remade 575 board appears or you manage to buy/swap/find one in better condition. Oh and switch surface mount electrolytic with non-polarised ceramic ones. They’ll never leak. Replacing like for like is just resetting the timer on a well known time bomb.
@iiidiyАй бұрын
Fair points all around! You're totally right, but a lot of this project (and most of my projects) are for the fun of the challenge. When it stops being fun, it stops being a hobby and I have to walk away / pass it onto someone else that would enjoy the challenge. Regarding caps, sometimes I like to use tants instead of electrolytics, but it depends what I have on-hand, how much I want to spend, and how "original" I want the board to look. I don't mind resetting the clock for 10-20 years and mark the boards with the date they were completed so I have a reminder. If these were mission-critical machines, I'd look at this differently, but it's a low-stakes tinkering hobby for me, so just a matter of personal preference :)
@JohnVanceАй бұрын
I had one of these like 20 years ago when it was already very obsolete. I ran Debian on it from a SCSI ZIP drive and felt like a god.
@iiidiyАй бұрын
That's fun! I never got Linux going on my old 68k Mac back in the day - didn't try very hard, but it seemed like a pain. Booting from a ZIP drive sounds... slow :)
@JohnVanceАй бұрын
@@iiidiy Decently fast actually since there was no GUI. It had to bootstrap from within Mac OS for some technical reason. It was a lot of fun at any rate.
@mcbeavАй бұрын
Love your content and dedication!
@danielktdoranieАй бұрын
I would have taken one look at that LC575 and said “that’s a parts computer, if that”. Some stuff is just way too far gone bro
@iiidiyАй бұрын
You are 100% right. But also....
@jubjuniorАй бұрын
Amazing work!
@cla3dАй бұрын
I have had this happen to me. It took me a year to fix an se/30 logic board that I almost sent out several times when I felt like I had to give up. But taking time off from it several times gave my brain a rest and eventually I found the problem and fixed the board without help. That was the reward and when I look back the fun of the whole thing. Once it was fixed I was sad I didn't have something to work on. Its a love hate thing you have to settle into. I am sure you will figure it out. Love your videos
@iiidiyАй бұрын
Thank you for the encouragement! And I'm getting to know the love-hate relationship well :) Happy to hear you have a working SE/30 in the end!!
@priosmithsarkar2862Ай бұрын
Nice Video, I like this kind of ASMR Satisfying Restoration. I had a kind of sweet spot in my heart for the LC575. Thanks for trying.
@iiidiyАй бұрын
Thanks, I think with the team of talented folks helping now, we'll get it over the finish line!
@MI7DJTАй бұрын
I wanted this to work so bad!! I have to admire your attempts mate but sadly this one was too far gone. Thanks for sharing!!
@iiidiyАй бұрын
Me too... me too. I'm glad there are more talented people willing to chip in!
@MI7DJTАй бұрын
@@iiidiy It works both ways my friend. Even the best learn from your exploits ;)
@charlessale409Ай бұрын
Lovely old thing. Good luck.
@DolezalPetrАй бұрын
Putting a board with electrolytic capacitors on it into an ultrasonic cleaner will destroy the capacitors, never do that! Edit: Unless you replace them of course :)
@OctavioGaitanАй бұрын
Loved this video! Don't feel too bad. I'm sure you tried your best. I wish schools weren't so cruel with their old computers. I mean, come on. There's still people like us computer heads who would love to own a Molar G3 and repurpose it. Those Molar G3s are getting extremely rare. I hope the ones shown at the beginning of this video went to good homes instead of the land fill.
@iiidiyАй бұрын
Those awful storage conditions are thanks to a private buyer that got ALL the computers from a closed school. The buyer isn't into tech, just saw a flipping opportunity, and hasn't cared for them at all. It's heartbreaking to see, and I took on as many as I could. At least they are selling them for cheap, so the computers will eventually find their way to new homes.
@OctavioGaitanАй бұрын
@@iiidiy Cool to know. :)
@DavidStahlOLDHAPPyMACsАй бұрын
WoW I feel your pain & suffering iiiDIY Im sure they TheTechNight & Big Bad Biologist will be able to help you out
@iiidiyАй бұрын
Thank you Dave! I have complete faith in their abilities. I'm very lucky to have talented friends :)
@Runco990Ай бұрын
EVERYTHING on ebay is at inhumane, stratospheric prices nowadays. Everyone thinks they'll get rich off something they found in a landfill. And god forbid, at least wipe it clean first!! Anyway.... surface mount capacitors will kill everything they are in. Horrible things. One thing I learned after years of ebay projects..... only the SELLERS win!
@JamieBainbridgeАй бұрын
I would have given up on this. About the time I'm cannibalizing good working systems is where I consider it too far gone. Cool journey you went on tho. Apply those skills to other systems :)
@iiidiyАй бұрын
Taking one look at the board should've been "too far gone" haha! But rest assured, the parts were only borrowed for troubleshooting. They're going back on the 475 soon, before this 575 board gets shipped out.
@ConnerWithAnE_Ай бұрын
What liquid do you have in your ultra sonic cleaner?
@iiidiyАй бұрын
Chemtronics Flux-Off Aqueous. It seems to work fine, but I don't have experience with anything else, so take that with a grain of salt :)
@jjohnson71958Ай бұрын
can it run an amd k6 cpu?
@mdrumtАй бұрын
PCBWay a new motherboard? 😉
@iiidiyАй бұрын
Hah! If only my KiCAD skills were strong enough! :) I know you're kidding, but I do hope one day someone makes a "reloaded" version of this board... that'd be really cool!
@TheBasementChannelАй бұрын
lol this is epic!
@mcbeavАй бұрын
What discord are you referring to?
@iiidiyАй бұрын
It's called "Retro Electronics Repair", run by Techknight
@mcbeavАй бұрын
@@iiidiy Thanks! Can you possibly share a link?
@iiidiyАй бұрын
@@mcbeav I don't know if this link will work, but you can try it: discord.com/channels/865380038937542687/865914693898076180
@mcbeavАй бұрын
@@iiidiy No dice, thanks for trying.
@jjohnson71958Ай бұрын
next time bro just buy a replacement lc575 motherboard
@iiidiyАй бұрын
I'm no billionaire... just a regular working guy ;)
@jjohnson71958Ай бұрын
@@iiidiy i would.. and it would save me time and hassle
@Jdvc-yd5txАй бұрын
It will be good when these types of shows could be 100% computer generated. Like you said it's dangerous work - corrosive chemicals and 25 KVs.