No video
Will This RC Car Stunt Cheat Work?
Рет қаралды 624,963
Күн бұрынV2 Vids Freestyle Challenge • KEVIN TALBOT.! I'm CAL...
📕The Traits & Habits the Successful have - kevtalbot.clic...
🎓eBay Secrets (11 step Blueprint) - kevtalbot.clic...
Get Servo Here Servo - www.banggood.c...
Get Battery Here 3s www.banggood.c...
(never store or charge lipos near anything flammable)
Get Your Merch Here teespring.com/...
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.t...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #rc
@Autocon609 4 жыл бұрын
"Sometimes you win, sometimes you learn." Nice.
@dustonc1 4 жыл бұрын
and the rest of the time, you're a hobbyist!
@iexist2597 4 жыл бұрын
Well you win some you lose some...
@Obeyippy47 4 жыл бұрын
What if you got a rx/tx with a throttle ratio that you throw down when you get into the wheelie??
@-crossheart 4 жыл бұрын
@@iexist2597 this isn't seige
@mikey7202 3 жыл бұрын
@@-crossheart I like your profile picture dangle bros
@gogotrololo 4 жыл бұрын
Kev, try moving the weight distribution to the nose, that way in a nose wheelie you end up putting the CG closer to the ground, and you wont have the tail dictating so much of the topple! It'll also help you get into the nose wheelie by making the tail lighter to put in the air.
@chrisfowler3100 4 жыл бұрын
Mount the gyro in line with the axles and it should work perfect
@DaanRacer 4 жыл бұрын
Yep
@obeymelissa584 4 жыл бұрын
Putting it at the mid point of where you want it balanced at will work best cause then it won't have to over work itself and not cause it to end up burning itself out....lol....tjink smarter not harder
@tahustvedt 4 жыл бұрын
It doesn't matter where it's located as long as it's orientated correctly. It's only sensing rotation, not acceleration. That's why it works just as well on the nose of the helicopter as it does anywhere else.
@ollepearce3116 4 жыл бұрын
Or do a wheelie just change the body the other way around
@candytownsend8907 4 жыл бұрын
Lol yeah
@Thunder-iu6ev 4 жыл бұрын
Like the monster truck, backwards bob lol
@edgiestofcars 4 жыл бұрын
Thunder Truck I loved that truck
@captainaxan4967 4 жыл бұрын
Lol yea
@ollepearce3116 4 жыл бұрын
@Chad Kunka yeah
@CHEESEBURGERRC 4 жыл бұрын
If you put in a smaller pinion, it’d be way easier.
@bricksandpieces1 3 жыл бұрын
I haven't watched yet but your channel seems intresting
@CHEESEBURGERRC 3 жыл бұрын
@@bricksandpieces1 Thanks!
@bricksandpieces1 3 жыл бұрын
@@CHEESEBURGERRC I was right!I actually have a car just like that!I subbed
@bricksandpieces1 3 жыл бұрын
@@CHEESEBURGERRC and I have notifications on
@CHEESEBURGERRC 3 жыл бұрын
@@bricksandpieces1 Thanks for the sub! 😀
@PhilBender612 4 жыл бұрын
Kevin I definitely think you deserve an A+ for effort on that one! That was a genius concept you had to accomplish the nose wheelie. Good luck with the actual challenge and no cheating Kevin!
@kebel100 4 жыл бұрын
move the gyro closer to the nose!!! just like your chisel and the broom make the object longer to balance it
@chrisbenjamin8843 4 жыл бұрын
I would have thought move it nearer the tail?
@harrisoncampbelllyon7512 3 жыл бұрын
@@chrisbenjamin8843 same
@Riley-ro5tf 4 жыл бұрын
They make spacers for the TRX4 you could use to give it a wider stance
@abdullahseedat4840 4 жыл бұрын
Let’s goo! When this guy uploads it brings a smile to my face every time 👍🏼. Keep it up Kev
@camsty1225 4 жыл бұрын
I was having anxiety the whole time when you were doing it by the lambo 😂
@captainloudpants 4 жыл бұрын
Kev, just slap some wheelie bar wheels on the front for the chassis, it already has the holes for it.
@ktarnikelly374 4 жыл бұрын
That's CHEATING
@Handicapkilla94 4 жыл бұрын
Oh dude when you said maybe the broom and then actually did it I busted out laughing lmao
@dreamsgrandpa8192 4 жыл бұрын
2:29 boys coming from quarantine
@gerben19801 4 жыл бұрын
your face when concentrated convinces me, you are rowan atkinson's younger brother...it must be :P 12:52 ;)
@FarmerFpv 2 жыл бұрын
Kevin. For it to work you need an auto-level mems gyro. The Tail gyro is a rate 3-axis gyro so it won't hold the wheelie. Something like a cheap HK auto level mems 6axis gyro for a plane or coaxial helicopter. Even a cheap auto-level hobby king drone gyro. They are like 20 dollars on eBay or hobby king. Rate gyros will not try to bring it back to level only auto-level gyros will. Try it again with a 6-axis gyro and you will see it will work and not be twitchy. Cheers Buddy! Love your videos, you're the BEST!
@dustonc1 4 жыл бұрын
Liked for 1) the look on Kev's face when it sort of works but not really (12:25 ish), and 2) a few seconds later when the gyro is tired of filming and takes out the camera. Fantastic!
@TurtleSodadrives 3 жыл бұрын
Balancing a broom so close to the supercar of my dreams. I am sweating.
@ethanjohnson8958 3 жыл бұрын
Thought he was gonna hold up the back end with the heli smh... love the fun vids!
@baxterwillers5793 4 жыл бұрын
That’s why he’s the best youtuber
@nathanz602 4 жыл бұрын
12:25 What my New Bright did after *2 seconds* of being outside...
@zachminick680 3 жыл бұрын
It’s what i did with my traxxas big foot no.1
@cante199 4 жыл бұрын
Hey Kevin.. you have to transform it like a sort of segway.. so if you want to do a nose wheelie, you should have heavy tyres in the front and a lot of weight at the front bumper level. This should allow you to get more time in nose wheelie 😉
@christap3797 4 жыл бұрын
Love the vids keep up the good work and the new content! We neef more nitro!!!
@baccas66 4 жыл бұрын
The gyro is designed to work with a servo. Perhaps a brushed motor with an old school speed controller, that is servo controlled may yield more success? Just a thought from an R/C heli pilot.
@speedsparks257 3 жыл бұрын
6:30 physics lesson with Kev
@Joelmelanie 4 жыл бұрын
briljant Kev! an electric gyro is not going to work, try to build an mechanic gyro, spin an metal wheel up in high rmp and than go for it, the ultimate cheat🤟 good luck
@tharushapeiris6772 4 жыл бұрын
Put it on a high gear and low gear system so you can switch it from high to low gearing depending on if you want to do the front wheelie when the car is slower it is easier control Ro you can train yourself on a slow car
@thecollectorrc 4 жыл бұрын
That was entertaining! The hardware used was just to small. Most of them use mercury in a tiny glass tube inside. So imagine a tiny cup of water and trying to not let it tilt to move the water. By increasing the size of hardware it would eliminate the twitchy reaction. Just like the broom theory you showed how its easier to balance larger items, yet same theory in the actual hardware ( Gyro ). We at The Collector RC love your channels. Keep up the enthusiasm and good work.
@ParRagon- 4 жыл бұрын
The problem with that is that you still don't sit in the rc car. You can't feel the change and react accordingly. In this matter the gyro is replaced by mike paired with much much much more weight of the monster truck. Because of the weight and length of the monster truck the driver can react way more effectively
@TrailerTrashRC 4 жыл бұрын
youre a genius my friend. love your ingenuity
@Evergreen085 Жыл бұрын
Kevin’s failures are better than most guys best vidz!
@SpeedSyko 4 жыл бұрын
The erevo 2.0 I was doing them on but wasn’t trying to beat a record, maybe try a different car
@rc_dubai 4 жыл бұрын
Love your vids kev, Ive whatched every video since 2017 and they are all awesome, keep up the good work, we love you man!
@rubbersidedownrc2307 4 жыл бұрын
That's super easy to do with my crawler. It's heavily weighted in the front for extreme climbing
@matteohoefle6306 4 жыл бұрын
How creative are you to take the balancer out of the helicopter?🤔👍🏼
@diegosauda9596 4 жыл бұрын
when the real one comes down it rests on the frent bumper and then picks up again,but you seem not to use a body long exactly as the wheels,and then use the slow speed gear to move back and fwd
@ryanbenge7824 4 жыл бұрын
"Once smoke comes out, you cannot put it back in" bahahahahahah that's amazing I love it kev your awesome bro
@AdmiralTom 4 жыл бұрын
Classic sparky joke that one but it's a goodun
@randomvet8930 4 жыл бұрын
KEV, I'm not sure if anyone mentioned this or not cause there are almost 500 comments at this point, but I just watched your video and i love the idea but I think the biggest issue is the angle. You attached it perfectly up and down in line with the truck, but that's not where the truck balances at. You need to shim it to be in line with the angle of the balance point. I hope I'm making sense and you see this comment cause I'd love to see this idea work.
@jbirdmax 4 жыл бұрын
Absolutely brilliant! Fantastic video mate.
@zigazzop1291 4 жыл бұрын
Kevs vocabulary 1 DIRT CHEAP! 2 TUMBLE WUMBLE!
@thelaneman 3 жыл бұрын
Once you get that figured out you totally got to make an RC unicycle! LOL
@jef____4054 4 жыл бұрын
Put it at the back of the car.. You're longer vehical theory with the broom was correct. At the moment it's pivoting in the middle
@eddienava3253 4 жыл бұрын
I love your videos man it’s just a good thing to watch to keep my mind off other things thank you and plz keep making videos:)
@trippholland5131 Жыл бұрын
Try moving the cg lower and put the gyro in the center of rotation
@lancsrc566 4 жыл бұрын
Could you not turn the throttle response down just a thought an just found ya channel love it mate love the links too 👍👍
@fabiandominguez3025 4 жыл бұрын
What modifications could you do to this exceed rc 1/8 scale mad torque 8x8 crawler?
@emmarowland7102 4 жыл бұрын
I like your vids and your rc car collection
@BackyardClunkers77 4 жыл бұрын
On monster trucks & real cars, 4-wheelers, dirt bikes, ect.... what your missing (Kevin), is the idea & usage of holding the “brake pedal”, plus the throttle in a delicate balancing act... like doing a slow wheelie on a 4-wheeler, 3-wheeler, or dirt bike: the normal position of a normal wheelie- the back brake(s) is your best friend for once the machine is in the air to it’s almost balanced point...
@BackyardClunkers77 4 жыл бұрын
Kev: use a helicopter transmitter (radio/ remote) for mastering this frontward... wheelie?.. 🤔 have one hand using the throttle, & the other hand using the brake...
@halleffect1 4 жыл бұрын
maybe a brushed setup would work better with the gyro. a higher turn motor too, less speed, less jerky and gear it down too
@urmom7316 4 жыл бұрын
The invisible man is having a good time in the thumbnail
@traxxasftw 3 жыл бұрын
Smaller pinion as suggested, and locked diff so there is no play or speed difference also add some weight to the front, maybe a wheel balancer weight or something. Could cheat and have a mini wheelie bar at an angle underneath that you cant really see and better yet have it spring loaded so it will pop out when you go up.
@robertbrittliff5939 4 жыл бұрын
Try softer tyres on the front. That will create a flatter bottom and make the car role less. Also power down the RC as much as you can...
@maduarecapu 4 жыл бұрын
V2 vids may be good at real monster trucks,but you've got the rcs bro!!:))
@boy6named6zoen6 4 жыл бұрын
You should have used the heli transmitter. The pitch/throttle stick as throttle for the car. It could make your response time much faster. Just make the curve so from the middle on the throttle channel going up is Forward and down is reverse. With some practice it could work. Also the gyro didn't work properly because you couldn't change the gain of the gyro. The dials on a gyro only change what it says. Limit is the endpoints of the servo and delay will delay the response time.
@BIGDRONEFLYER77RC 4 жыл бұрын
Great one Kev 😉👍 cheers from California 🇺🇸
@jackmackerel4151 2 жыл бұрын
Maybe if you tried the gyro with either a sensored brushless motor or a brushed motor and ESC. I've read that sensorless brushless motors are not very responsive at low RPM.
@Chron0ClocK 4 жыл бұрын
Hey Kev, a brushless censored motor with 12/87 gearing. the problem in this case is that your motor is brushless, but not censored so there just isn't a lot of fine control at lower RPM's without a censored motor. Coging I think it's called.
@MrCleanRC 4 жыл бұрын
Have you switched it to head hold vs rate mode? Also use smaller tires for less twitchiness!!! Use the signal wire for gain adjust see if it works more finely thru the transmitter. Or try a helicopter transmitter.
@danidavis6350 4 жыл бұрын
Hi kev you are the first person I have been watching for the last few weeks
@humboldtoregonian9400 4 жыл бұрын
Maybe put some lead in the front of the car to lower the center of gravity for the desired position. This should make the required reaction time lower by storing kinetic energy; that will possibly smooth put the peaks of the throttle.
@ValleyRC Жыл бұрын
I noticed this basic functionality has now been implemented in some toy grade stuff like the New Bright Gravdigger
@Basherqueen 4 жыл бұрын
Very cool Kev! The gyro response is fast and the ESC response is slow … seems not to work like it should. May be you just want to mount a servo with a big weight attached to the horn in the back of the car witch should work much better. 😘😘😘
@JimmyB55 4 жыл бұрын
You need Pat off camera with a fishing pole and thin line tied to the rear bumper. Winner!
@jasonchilson9262 4 жыл бұрын
Thoughs big tires made me laugh so hard i cryed
@bricksandpieces1 3 жыл бұрын
Ok honestly I love the way that looks!
@samuelyearwood4073 4 жыл бұрын
4:07 It looks like the iron man monster truck from monster jam
@tmaddock71 3 жыл бұрын
LOL TRUE
@amberjames8787 4 жыл бұрын
The rustler bodyshell looks sick on it🙂🙂
@cardude900 4 жыл бұрын
With some more practise this could work, i tried it my self with the HPI Wheelie King and it is realy hard not to fall over but its not unmakeable.
@51im 4 жыл бұрын
Try putting the gyro closer to the centre of rotation, as close to the front axle as possible.
@fortnerbuiltmotorsports444 4 жыл бұрын
Kevin get some “Tumble Wumble” shirts made with a picture of a broke outcast or kraton, I’ll take 5 lol!
@Justbashits 4 жыл бұрын
Kev I love your videos inspire me every day with my friends bashing RC keep the good videos for me
@wooty8721 4 жыл бұрын
Kev, try adding some counter weights on the front, i've managed to make it work quite well. you can thank me later
@riccardomassafaidatech 2 жыл бұрын
Kev that was actually a good idea!
@trx-forlife7907 4 жыл бұрын
To help the front wheels thing set on your radio on front and back only take the brake out so it would be more responsive
@SaviorUnkind 4 жыл бұрын
Tires soft enough to make a large flat spot would give you more control
@jamescarruthers1967 4 жыл бұрын
The suspension is doing weird things to the gyro. Try again with as rigid a truck as you can (rigid suspension / hard tyres / stiff chassis etc.) and the feedback to the gyro from its inputs will be more immediate, hopefully freaking it out less...
@bustersbashers2280 4 жыл бұрын
I thought that giro was going to work but na lol. Great vid Kev mate 👍👍👍😁👍👍👍👍👍👍👍👍👍👍👍❤️
@oddguy2829 3 жыл бұрын
BEC power. Gyro is still only getting 5V or whatever the ESC is set up for :). With some fine tuning you could make that idea work. pretty cool stuff :) Btw. Having the gyro close to the pivot point will make it more precise.
@randyraybon1901 4 жыл бұрын
Dont know if anyone has suggested it, but change the gear ratio to a real low ratio so it doesnt move so fast in either direction.
@trevormassey434 4 жыл бұрын
A great rc that I do 2 wheel skills with is my Everest 10 it’s great for stompies and wheelies is recommend it for doing indoor scale stuff and it’s a super cheap rc and a very capable crawler
@jaeganthompson5997 3 жыл бұрын
Kevin Talbot put the gyro at the bottom end closest to the ground and have it turn on while its in Wheelie position and not head lock .turn on and off 3 times To reset it.good luck.
@tyronebiggums459 4 жыл бұрын
Just a friendly note the “front wheelies” are called stoppies
@tyronebiggums459 3 жыл бұрын
@William Clark sorry
@artfess 4 жыл бұрын
you need to put the gyro on the nose axle (front)... so it have less movement and less sensitive
@mountainphotography6390 4 жыл бұрын
What about if you were to get inflatable tires and deflate them almost all the way that would help balance out the weight a little bit more but for some more help you could add tire weights like on some crawlers and things to help keep the center of gravity a little bit lower
@user-TJ365 4 жыл бұрын
Try the gyro in rate mode vs heading hold, it won’t hold it nuts on, but will assist you and resist change vs trying to get back to where you started.
@Mudsuitable 3 жыл бұрын
Cool vid!! I think the problem with the "gyro" is the movement of the suspension along with all the excessive driveline slack or play that's just not present in a more precise and lightweight helicopter setup, maybe if you removed the shocks and replaced them with solid rods to lock the chassis and axle as one unit and tightened up the gear mesh a bit you might have a better chance of achieving good balance since you're not actually in the truck to feel what's going on physically .. Hey, if you're gonna cheat why not go all out !!! Lol
@yyckey5022 4 жыл бұрын
Kevin, look at he's video again, he use the monster nose as like a wheelie bar, when the truck lean forward, the nose sometimes tap the ground, so maybe put the bump back on will work. Also maybe putting a little weight at the nose will work.😉
@davidrubin9258 Жыл бұрын
KEVIN, GET THE GRAVE DIGGER FREESTYLE R/C - IT'S A 1/15SCALE TOY GRADE RC, BUT IT CAN WALK/ROLL ON FRONT WHEELS & DO THE 360 SPIN!!!!
@sic7475 4 жыл бұрын
On my stock, brushed slash it can do those consistently (on the carpet) I'll take it full speed forwards then immediately go full throttle backwards and it does a front wheelie like in the video and the front bumper prevents it from flipping over
@ParRagon- 4 жыл бұрын
Yeah and that just isn't that what Kevin wants. He doesn't want to use the bumpers so he removed them completely.
@dannydewaard1620 4 жыл бұрын
Hey Kev, great video's! Loving the channel, been digging through a lot lately! I was wondering, dont you vent you're tires? And do you have some sort of wise reason not to? Thanks in advance and keep up the awesome job man!
@projectrc4610 4 жыл бұрын
Use a dual stick and use exponential to balance the throttle and revers you will have much smoother transition between forword and revers
@mahlonpeachey7667 4 жыл бұрын
Funnest thing was when it attacked the camera lol 😂
@jakobwiebe7461 4 жыл бұрын
Love the vids kevin
@philjohn1513 2 жыл бұрын
Brilliant idea, and with a bit of fettling I reckon that concept could work. I am thinking mount the gyro unit on some kind of pendulum??? Either way, I really want to see this work
@h.w.m.306 4 жыл бұрын
I thought it was the raminator in the thumbnail 😂😂
@jackstrempel5135 4 жыл бұрын
same
@brettcarlow5779 4 жыл бұрын
5:37 what the hell you got a Lamborghini congrats
@oliverwilkins621 4 жыл бұрын
Great original video kev!
@SebastianLong 4 жыл бұрын
If you turn up the neutral position percentage on the throttle on your transmitter or your throttle sensitivity (expo). You might just be able to get it working.
@oskar1296 4 жыл бұрын
most people: ill make it a longer wheelbase kev: ill use a broom
@briantoste904 4 жыл бұрын
Put the gyro twards the rear bumper! And probably some lower gears?
@kampkrieger 4 жыл бұрын
It cant work, it is just a sloppy PID loop that tries to stand up straight. But what you are trying to achieve is two things: staying straigt while not moving much. If your gyro works perfectly and keeps the thing straigt, there is no constraint that keeps it from speeding up, then your speed saturates until the gyro can no longer prevent falling over by speeding up more. So you need a second PID loop around it that dictates the target angle to the inner loop that tries to reach a speed of 0. You could mount the gyro on a servo arm that is controlled by the throttle value (in the output of it) that will try to set speed to 0 and if speed is greater 0 it will turn the gyro and therfore set the target angle. But you also would need some delay or a very slow servo.
@gameland456 4 жыл бұрын
Kev I saw an RC plane in the background I was actually looking to buy one of those I hope you review it:)
奧特羅羅 Ultraman
Рет қаралды 6 МЛН