williams system 6 diagnostics

No video

williams system 6 diagnostics

Рет қаралды 11,950

Күн бұрын

This video gives an overview of the diagnostic systems built into a Williams System 6 pinball machine, which also covers System 4 games as well.

Пікірлер: 23

@TBayJay 5 жыл бұрын

Very informative! I'm troubleshooting a few issues with my System 6 Blackout and this helped a lot

@XxBishop78 5 жыл бұрын

What isssues is blackout having?I own one myself

@ChadTower 5 жыл бұрын

@@XxBishop78 Ha, same here! Working on one right now. My issues are that it's locking up after 45 or so seconds and sound seems to have died entirely. I get decent voltages on both sound and MPU so I think the issues might be unrelated.

@acidburn7683 2 жыл бұрын

Thanks for the video it really helped me.

@rogerwilliams3408 5 жыл бұрын

Great info. Moved along nicely. Thank you so much. Good stuff!

@alexmartin9539 5 жыл бұрын

Thanks for posting this, super helpful!

@zenithtuberadio 8 жыл бұрын

Great video! Thank you very much. It will help a lot.

@simonbenzekri4552 2 жыл бұрын

well done & explained.

@scottmercer1991 4 жыл бұрын

thanks-diagnosing a blackout right now...

@RiskyKilla3 2 жыл бұрын

My master display and others all went blank when I was messing around with the settings, is there something I can do to reset and get them back on? Is there something I need to flip or do on the cpu board?

@SteveJones172pilot Жыл бұрын

I'm interested in that rom adapter you talked briefly about.. I checked your store but dont see it. What exactly did that do? I'm all for minimizing the number of ROMs in my machines!

@SiegecraftPB Жыл бұрын

In the past, I used to offer an adapter board that used a single 2764 EPROM in a system 3-6 board set. But I've been sold out for a while, and they were a bit too problematic, so I've decided to discontinue them. Might be some out there on the used market.

@SteveJones172pilot Жыл бұрын

@@SiegecraftPB Interesting.. I've never looked at exactly what the memory map looked like for each chip - I know you can do some consolidation but wouldn't think there would be enough address lines on any one socket to do what you did.. I'll have to check it out.. Thanks!!

@MikesMobileDJ 7 ай бұрын

Adapter for the memory was that soldered to area where the batteries went? My socket for the batteries is fried. Looking for an alternative.

@tossontower6486 4 жыл бұрын

Great video thanks !

@Fresh2day 4 жыл бұрын

Any steps or tips for a first start up? I just purchased a williams blackout same era a little concerned that i might ruin something by turning it on.

@mikesummers4712 6 жыл бұрын

hi great video, i just picked up a firepower, it was working fine, i tried to get 5 balls per game, now i can't get the game to work at all, i only used the coin door adjustments??

@vampirekangaroo5536 6 жыл бұрын

ken santos You ever get your FirePower going??

@mikebrdn5719 3 жыл бұрын

tnks

@tsunamitim1206 4 жыл бұрын

how do you turn on fire again ???

@anthonygervolino7662 3 жыл бұрын

Do you have to be in diagnostic mode to hear sound when you hit the button on sound board

@SiegecraftPB 3 жыл бұрын

Nope. Sound board has a completely separate processor, and runs its sound test independent of the main CPU board. All the sound board needs to get into its own test routing is power and a speaker.

@anthonygervolino7662 3 жыл бұрын

@@SiegecraftPB ok thanks alot hopefully new sound board fixes but I think it may be a problem with my rottendog board