I Broke Another Power Hammer?!

No video

I Broke Another Power Hammer?!

Рет қаралды 135,261

Күн бұрын

For 21 FREE meals with HelloFresh plus free shipping, use code WILLSTELTER21 at bit.ly/3jmDNP1!
Thank You HelloFresh for sponsoring this episode.
Stay tuned for more fun projects!
Make sure to check out Patreon! You'll get your name in the credit roll of the video, and it's the best way to directly support us.
/ willstelter%e2%80%8b
The best place to follow along with the day to day updates in the shop is through my instagram @Will_Stelter ( / will_stelte. . )
My PO Box for if you have any cool old tools, maps, or blueprints you’d like to see hanging on the walls (please don’t send just anything) is:
Will Stelter
PO Box 514
Manhattan, MT, 59741
Editing by the talented @isaiaharnoldfilm
lastandfirstproductions.com
Website www.willstelte...

Пікірлер: 1 400

@WillStelterbladesmith Жыл бұрын

Please do not send any info or money to any account claiming to be me- it’s a scam!

@Deesdessessesder Жыл бұрын

Thanks for dealing with it. Looks like the account that pinged me isn’t visible anymore. I wonder how many “winners” it chose..

@WillStelterbladesmith Жыл бұрын

@@Deesdessessesder sucks that it happens, but there was about 800 comments it looks like

@lewiswinters6736 Жыл бұрын

Thanks for the heads up. It is sad that people do that.

@lovepcgaming2335 Жыл бұрын

Sucks that this happened. It's awesome that you stay on top of this kind of stuff will.

@Zahel_Talaxin Жыл бұрын

How do I know THIS comment isn't a scam???

@chrisflannery3276 Жыл бұрын

You should measure the wear between the shaft and the old bearing, it would be interesting to see how out of spec it is

@JCisHere778 Жыл бұрын

Jup, also very important to choose the correct bore size and oil viscosity, going forward. Otherwise the bearing will wear out prematurely

@thebigshmoog Жыл бұрын

57.5 lbs?

@shade38211 Жыл бұрын

@@JCisHere778 let my brother borrow a chainsaw. He has no idea what viscosity means. Thought engine oil could be swapped with bar oil. Had to rebuild my ms180 down to new piston. Bar,chain, brake, shaft,and even piston was scored when came back. Guessing piston was running out of premix I gave him and he just put unmixed gas. Kinda been his life story on borrowing my stuff. So I kinda blame myself for lending it.

@davidt8438 Жыл бұрын

You are the hope of our future. The reason this job was so difficult is because everyone else who used this machine before you knew how tough this job was to tackle and they didn’t want to do what you just did. Events that happened since the early 1900’s all came together which allowed YOU to be born, take an interest in this kind of work, build enough muscle, make enough mistakes until you gained enough confidence and talent to see what all the other men in history saw and you actually did what they deemed too much trouble. Boy I wish there were more of you guys around these days. This country sorely needs men like you if it expects to survive. Good luck to you because if you get hurt doing this type work it’s game over. God bless you and men like you.

@tristantilbury3870 Жыл бұрын

Pully puller and a bushing pusher. Love it!

@teropiispala2576 Жыл бұрын

Thermal expansion factor of bronze is higher than iron so it's understandable that it popped off only after bronze was cooled down.

@bobrobert6277 Жыл бұрын

they do that on some safe doors so you can't attack them with torches they have round doors with a ring of copper or brass inside that seals the doors when heated

@DNSforge Жыл бұрын

That’s exactly what I came here to say.

@markbranton1240 Жыл бұрын

42 lbs, Will you crack me up man. There were so many moments I was holding my breath on this video waiting for the chaos to ensue. Thanks for another awesome and scary video

@rayhosking3927 Жыл бұрын

Damn! That was going to be my guess too! I'll go 43lb

@officerdic Жыл бұрын

It’s definitely close or spot on to 42… I went less a half lb

@twostroke350 Жыл бұрын

I was in a workshop of an old-school light engineers who does some bits and pieces of machining for me. Out of nowhere there was an almightly bang from the other side of the shop. It was the cast iron engine barrel liner from a big marine diesel letting go in his big hydraulic press. He'd put it in there the day before, decided he had enough pressure on so left it there with a wooden board in front to contain any shrapnel if the cast iron bombed. His comment was "It's got near 60 tonnes on, I know it's going to move. It's just a matter of when.".

@BadForgeWeld Жыл бұрын

If there’s anyone who doubts how HARD this is, there are parts that weigh 50lbs and Will just handles it like no problem. I can’t imagine working on this project by myself. Wild!

@TheKajunkat Жыл бұрын

Will that looks like a mechanical fatigue crack. They will typically start in the root of the first fully engaged thread in a fastener (where the stress is the highest). Typically they are caused by loosing the preload on the fastener which caused the stress profile to change. They take a while to initiate and grow. you probably have more on the other hold down bolts.

@pierrickcyrenne4904 Жыл бұрын

That's exactly right. I work as a fractographer and I analyse in service failures of metal components and what you said is 100% true. I couldn't get a good enough / clean enough look at the ruptured surfaces, but it does look like a fatigue crack. Loosing of the preload makes a lot of sense considering he said the wood underneath compresses over time, meaning the bolts do lose their preload over time. Will, if you somehow see this, the other bolts, or at least some of the other bolts probably have fatigue cracks in them as well, propagating over time with each hit from the hammer. Now, it could also be a specific defect in the thread of that particular bolt, like a rough machining or a left over rolling defect from the manufactured round bar for example. That would explain why this bolt has failed and the others have not yet. Truth be told, it could be a number of thing. Just the preload can affect the fatigue life of a bolt, so maybe this one loosened more than the other?

@stevealford230 Жыл бұрын

Yup... gotta tighten bolts basically every use, even if it feels tight already.

@Tina-Brune Жыл бұрын

if you haven't decided yet, i think the bearing would make an AWESOME base for a sculpture/furniture design, like it's literally 100 years old (i may or my not have an extra fondness for brass)

@zzzires5045 Жыл бұрын

Bronze not brass Copper+tin vs copper and zinc Bronze can scrub up killa but doesn't look like fake gold

@davidtoews5584 Жыл бұрын

Will, I deeply enjoy your humor. This had me busting a gut! Also, I just love how you have no hesitation at all about dismantling this thing. Just like... I'll build a puller for that. I'll build a pusher for this. So good.

@proberts34 Жыл бұрын

Yup. Youthful fearlessness. And if a problem crops up. . .deal with it.

@johnnyarnett777 Жыл бұрын

Always love the old machine refurbishing. Good to see engineering & mechanic principles in action

@mikechecks5994 Жыл бұрын

The fear on your face at 11:15, when you thought the hammer somehow powered up, was priceless. But also shows how much respect you should have for this type of machine!

@brandon2076 Жыл бұрын

i think that was more him being upset at the noise ruining the take?

@jimmylovesbikes Жыл бұрын

This is so inspiring and eye opening to see you make and refine tools to accomplish a task. Also, I don't expect to ever own anything like this but still so interesting to watch. Great job!

@jonathangreen9080 Жыл бұрын

hey i hand scrape bronze for our horizontal forging machines! Make sure once you get it scrapped to fit you do a slight crosshatch over it to get clearance for oil flow!!!

@stephens2241 Жыл бұрын

And here we see a wild Stelter in his natural environment - perched precariously atop an antique power-hammer.

@realjasondaniels Жыл бұрын

Cool. Just happened to get online right now.

@roberthymas9963 Жыл бұрын

* EDIT* Hey Will, my first guess was 46.5 pounds. But I have since created a 3D model in Inventor by superimposing dimensions based on the O.D. and I.D. dimensions you provided. With an estimated length of about 14.5 inch, my new "guess" is *32.8 lbmass*. Thanks for the fun video!

@daveb8598 Жыл бұрын

I was guessing about the same based on 16 inch length of tube with a density of around 8900 kg/m3 . I wasn't sure how much to estimate in the 'oil reservoir"

@oysteivi Жыл бұрын

Fixing and servicing power hammers is my favorite Will Stelter content. Especially when they don't tip over. Also, can I get the everyday carry bearing in black?

@scottknauert8573 Жыл бұрын

~60lbs. Bearing Bronze is 8.93 g/cm3 (C93200) and generally high due to the high lead content, the bearing is 5in, 12.7cm OD, 4.5in, 11.43 ID, and I'm using 15in, 38.1cm for length as I wasn't able to find the exact length of a No9 bearing but it looks like 1:3 ratio in the shot of it standing up. Volume of a cylinder is πr2h, so 19306-15638=3668 cm3. We also need to remove the central oil groove which looks maybe 1/8in on either side for 5in ignoring the taper which is 6435-5808=627 cm3, so we have 3041 cm3 * 8.93 = 27,156g or roughly 60lbs.

@scotadam Жыл бұрын

55lbs. Props to you my man. This video is a prime example of why I will never be a mechanic. I lost track of how many tools you had to make in order to take apart your tool.

@firsttpt Жыл бұрын

The number one rule for any building project sticking point is: "The solution only appears after you have made a trip to the hardware store and bought something you don't actually need." So I always buy an extra clamp, drill bits, level, or maybe just a tube of epoxy , anything to get that rule pre-satisfied.

@justinbanks2380 Жыл бұрын

In this video, we make ridiculously big tools to work on the ridiculously big tool! Love it!

@deepinthought469 Жыл бұрын

You need a maple or other hardwood base. When the anvil gets hit it goes down a micro distance INTO the soft wood and THEN bounces back up, eventually breaking something. Be glad it broke the bolt instead of the cracking the anvil eye. Bearing looks to be about 15Lbs or 7Kg empty, and 25Lbs or 11Kg filled with tools.

@joepiejaapie Жыл бұрын

might be done allready with all the grease dripping down from the bearing, but to prevent the wood from shrinking in too much, you can grease/lube it up. Just as they do for hammer/axe handles replace the water in the wood with some grease and it will evaporate a lot slower if at all.

@hawkbox Жыл бұрын

Repairing old tools is easily 60% of my enjoyment in smithing. This was a joy to watch.

@robertwhitney2232 Жыл бұрын

Hi Will, That key that you had a hard time to remove, is called a Gibb key. It is tapered and driven in. To remove it you drive a tapered wedge shaped tool under the hook of the head and it slides right out. They were also used to hold the flywheels and pulleys on, on our old antique engines. We have to use caution on small hubs, if they are driven to tight the hub can be cracked. I like old machinery. 👍👏

@JacobCanote Жыл бұрын

I am so glad you are in a good rhythm with your channel. You are nailing it. A joy to see.

@rodnattrass7021 Жыл бұрын

The dog's expressions as you explain are priceless

@jdougn2255 Жыл бұрын

A minute or two petting his dog makes the video way better! Couldn't quite catch the pup's name. Was it Marty?

@Ronnocanada Жыл бұрын

56.08 freedom units (lbs.) Loving your content! Authentic and honest. Also a big fan of your first favorite thing! God Bless!

@suprspi Жыл бұрын

46.46lbs I started doing lathe work with a wood lathe this year and the more I see people do machining on metal lathes the more I want to learn that skill too - I just don't have anywhere to put a metal lathe.

@jmcc685 Жыл бұрын

You can read the history of the Burgmaster company, beginning to end, in the book “When the Machine Stopped” written by Max Holland. A fascinating story about the Burg family and the destruction of their company by the rise of conglomerate Houdaille Industries the 1960s.

@jonn4307 Жыл бұрын

63.7 freedom units? Keep forging! Your an inspiration to so many.

@dimitristewart2238 Жыл бұрын

It cool to see you pull apart this hammer. I work at a forging shop as a industrial tech and we have 7 Ceco hammers. It’s cool to see people outside of my normal realm of people work on hammers!

@jenford7078 Жыл бұрын

I am always impressed with the amount of knowledge Will has for such a young man. I also love his sense of humor which takes the place of many name calling requirements when trying to work on any machinery but especially on his vintage stuff.

@spencebc Жыл бұрын

Be careful... already had someone attempt to scam me on this video. This looks really similar.

@patkrause1254 Жыл бұрын

I've been watching your channel from the beginning and you always entertain. I think it's humble of you to show your mistakes. It shows all of us that you are human. Another great show. God bless Pat

@eric13hill Жыл бұрын

Your problem solving skills and ability to make almost anything are very enjoyable to watch.

@jeffreykent3791 Жыл бұрын

Really hope that putting the ring around the anvil will still allow for some movement cuz if ur hammering and there isn’t any movement so much stress will go to the casting of the base

@robertnorton3870 Жыл бұрын

45.5 lbs. Love seeing these old hammers put back into service. Cant wait to see the follow up on this one.

@carlthor91 Жыл бұрын

Will, 32.4 lbs for the bearing. Take it easy with the heavy stuff, take your time. Best wishes from the far North.

@brentkeller3826 Жыл бұрын

Nothing can withstand the Stelternator9000! Good luck with repairs and such.

@seldoon_nemar Жыл бұрын

I suspect that the reason that bolt snapped was fatigue and streach. as the hammer probably compressed the wood slower than the anvil, it's putting them in a lot of tension, streatching them. combine that with impact fatigue and repeated re-tightening, and it's a recipe to snap them. you should really have some sort isolation media in there. maybe some kind of rubber washer, just to cushion the impact

@matthewstrickland1773 Жыл бұрын

As a cook I can honestly say every good cook loves a good blacksmith because without good black smith's making good knives it's really hard for us cooks to be good at our jobs. Please put out more chefs knives when you get a chance. Would love to buy some of your very beautiful work.

@Cajerunner Жыл бұрын

52.8lbs is my guess! I love watching you restore these big ol’ pieces of history! Can’t wait to see the next episode! Keep it up Will!

@melgillham462 Жыл бұрын

@[ᴛᴇxᴛ ᴍᴇ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ @Willboze SCAMMER ALERT

@BraxxJuventa Жыл бұрын

Thanks for filming Will! 👍😁

@TheGunCollective Жыл бұрын

the EDC bearing got me. LOL

@riftalope Жыл бұрын

14:16- At first I thought you were going to lock your first device around the key and pull it out with an attached slide hammer. 15:33- The first factory I worked at had forges, and two of the control stations had those as bases to make them "stools nobody wants to swipe". 22:02- Forget the weight (21 pounds). I want to make a pair of lamps out of it! (Art-nouveau OR art-deco/ Dwarven engraved)

@hickdl Жыл бұрын

29 pounds. So proud of the fact that you are courageous enough to openly share little bits of your faith in Christ. Keep it up brother!

@whitewizard915 Жыл бұрын

I am so envious that there are machines like that available in your area. I'm from Michigan and machines like those only survive in heated shops. I'm leaning toward the lighter side on that bearing, my guess is 38 lbs. God speed on this project, sir.

@TheWolfster001 Жыл бұрын

It look's like by now KZfaq would have gave you your Checkmark (✔) after your name, by now.. When I read the title I was thinking OMG!! Did his power hammer fall over and brake to pieces.. What a relief to see it is just a "maintenance Thing" or rather the previous owners did not to proper maintenance on it... Always entertaining watching you tackle a 2 or 3 man job, all by yourself.. I really wish more of your generation was hard work oriented.. Thank you for sharing.. You are a poster child of what young adults should be like.. Be Blessed.....

@I_M_Nonno Жыл бұрын

You're a young man that gives me hope for the future.

@jamessissem7319 Жыл бұрын

You could cut the earing down to use as knife guards or pommels.Perhapse some nice handle inlays.useful piece,don't just toss it.

@RenoFencingMan Жыл бұрын

Bro, praying for your business. Just started mine. It’s encouraging to see your wall in every video. What was the India trip? Missions? If you ever need a branding consultant, hit me up.

@twojuiceman Жыл бұрын

I have no plans of ever getting a power hammer, and yet these videos are so interesting to watch. Also, 17:58 Crunchy Grease is the name of my indie folk band

@peltiereric6497 Жыл бұрын

Hopefully you have a copy of the Machinery’s Handbook as it has a lot of useful information in it including about redoing bearings on old machines. As far as guessing the weight of the old bearing, probably 60LBS or more for that size

@bishipc117 Жыл бұрын

Ohh my I would love to have a custom knife by you. I have seen the stuff you have made. It’s very impressive. Now as for the bearing I would have to say. 3.4 pounds.

@Jimmy-iz2rx Жыл бұрын

That everyday carry bearing is a brilliant idea... just think... if you ever get lost, you can use it to get your bearings....

@kevinvoorhees7629 Жыл бұрын

78 lbs. Love watching you keep this piece of work8ng history alive. I saw that power hammer in the shop in Eureka. Very cool to see it is not rusting away.

@melgillham462 Жыл бұрын

@[ᴛᴇxᴛ ᴍᴇ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ @Willboze SCAMMER ALERT

@jangrahame4891 Жыл бұрын

23 pounds for the bronze? I love how you are not afraid to dive into fixing those marvelous old power tools.

@tenpennyguy Жыл бұрын

It's great to be back watching your adventures and the *big* growth in subscribers. Bravo!

@jaronhuq2067 Жыл бұрын

5.5 inch outer diameter, 4.5 inch inner diameter, and approximately 16 inches long gives a volume of 125.6 in^3. Multiply by 0.3 lbs/in^3 gives a mass of: 37.7 lbs.

@shaunfletcher7087 Жыл бұрын

as to the main bearing you need it dis assembled and to get it line bored thats the only way to get it done machine it in situ then make up the bearing to fit

@jamessouhleris9593 Жыл бұрын

Phenomenal use of a Segway joke. Also great Video! Thanks

@wackywixted Жыл бұрын

Is it worth replacing the bushing bearing with roller bearings? I know it wouldn't be original, but it would increase any future service interval, decrease your bearing resistance and reduce your required motor loads significantly. You could even cap the ends with some bronze so it still looks original!

@lisaa.671 Жыл бұрын

I love those old machines! It’s awesome that you restored them! My guess is that the bearing weights 40.2 Lbs.

@RayTheMickey Жыл бұрын

That is a taper key. .010" per inch taper. If it is driven correctly you can only get it out with a slide hammer. It should not be reused and you should replaced with new and surface grind to fit.

@ng-ht1vx Жыл бұрын

48# I think the bearing expanded when you heated it, but it cooled faster than the cast, so shrunk and popped out.

@stevealford230 Жыл бұрын

That's exactly what happened.

@JK-zq9vw 11 ай бұрын

Man, I’ve wanted to forge blades and other things for a VERY long time. I got hurt and was medically retired a while ago now. It’s taken a lot of my hobbies and goals away from me. I finally bit the bullet and got a small single burner forge and a piece of railroad track as an Anvil. I tried it all out and learned I can’t do very much and it costs me, and I end up in bed the following few days. I’ve tried to look for a cheap option to help, like a power assisted hammer or a press of some kind. I even thought about mounting a sledge hammer head to a long pole, with a spring to do the “heavy” lifting… Add a foot pedal that is attached to the hammer, so it’s not as rough on my lower spine injuries. I can’t even afford the pieces for something like that, and I don’t have a welder or welding experience to put it together.

@geneard639 Жыл бұрын

Removing the bronze bushing? I would have gone for shrinking the bushing using dry ice and a couple of paper or foam coffee cups or a cut out foam dams. Stick one dam/cup on one side, shovel in some dry ice pellets, dam off the other side and wait. Chilling the bushing might damage the bushing shrinking it, but the bushing is being replaced. Heat could damage the cast iron... so, just an idea for next time.

@0katmandude0 Жыл бұрын

I saw break the first one when it tipped over. Felt the pain man.

@bradjohnson9671 Жыл бұрын

Probably been mentioned in this thread, too many to scroll through! I'd really check the diameter of the shaft. If it has a taper, it's worth taking the time to true it up. Then you can spec the new bearing to the shaft and feel confident it will last another 100 years.

@justmeasmith Жыл бұрын

I'd say the bearing weighs around 57.3lbs, hope I'm right ;). I have a 121 y\o lathe, that was powered by a steam engine trough a belt. It was made in 1902. I'm missing like 2-3 gears for thread cutting but I hope one day I will get to restore it.

@zacbailey8249 Жыл бұрын

"Spread the word, let people know. Or don't. Or do..." 😆

@craigsudman4556 Жыл бұрын

Wild guess of 50 Lbs Will. Great video thumbs up.

@Of_the_House_of_Black Жыл бұрын

38 lbs. I absolutely love that power hammer. It's an amazing, functional, work of art. Keep up the amazing work Will!

@melgillham462 Жыл бұрын

@[ᴛᴇxᴛ ᴍᴇ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ @Willboze SCAMMER ALERT

@alwaystraining54 Жыл бұрын

Oh my goodness this had me chuckling throughout, great work sir you have a gift of humor as well! 33 lbs??

@MadMathMike Жыл бұрын

20:41 This little segment was so silly, and I loved it. 😂

@shawnglover887 Жыл бұрын

38 lbs 11oz is my guess on the bearing weight. Lobe to see you taking care of that beautiful piece of history

@twpvw5 Жыл бұрын

45 lbs I love the shop-made tools for these tasks.

@Nick_Slavik Жыл бұрын

Not gonna lie, I saw the title and thought, "oh no! Another one fell!?!?" 🤣 Hopefully you can get the Beaudry up and running as smooth as it was meant to be! 🙂

@theradioweyr Жыл бұрын

Awesome bearing puller/pusher. 38.6 lbs.

@b2bogster Жыл бұрын

Yes! That's awesome!

@yota4004 Жыл бұрын

it would be interesting to test the strength of that broken bolt. from what I have read, there are a lot of counterfeit chinese bolts out there. even the US military have found some on their equipment. it's like counterfeiting money.

@BalticBlades Жыл бұрын

11:15 the compressor heard some not very nice words sent his way haha

@RayTheMickey Жыл бұрын

I am not a fan of putting heat to a casting. When rebuilding presses we made bushing pullers specific for the bushing. You tie it to an enerpac cylinder with a B7 alloy all thread. You then use the cylinder to pull the bushing.

@adamgardner4213 Жыл бұрын

Rose bud torches... are run on equal pressure meaning if you have 8lbs of acytlene/fuel You should have 8-10 lbs of oxygen or there abouts If you the rose bud on say 40 50 -90 lbs of oxygen all its gonna do is blow the flame out and or un solder joins in the rose bud and make really loud popping sounds Which is the fuel exploding/backfiring in the mixing handle Fun Thats why you run spark arrestors the mixing handle

@keenan8144 Жыл бұрын

63.4 lbs knives made on a power hammer from pieces of that power hammer would be an awesome video!

@Dr.Cosmar Жыл бұрын

You have my corrupted luck stat... We do great, we roll high numbers all day on every skill check. Then, suddenly, when our confidence is at a peak and we are doing something like BREATHING... we swallow some spit and start dying, rolling a negative number when it should be impossible. It doesn't get better, get an extra pair of hands to f*** up with you. It helps.

@sebastien0.395 Жыл бұрын

32.9 lbs, my guess! Loved this video, made me think of when I try to repair something on my car and I don't have the right puller/pusher, ends up with a pile of steel laying aroung. It's not pretty, but it works !!

@njnovi Жыл бұрын

Best guess 37.8 lbs. Assumptions: density 8.87g/cm^3, length 16”, chamfers 3/8”, major OD 5.5”, ID 4.5”, center groove OD 5 3/8”

@poe8259 Жыл бұрын

38.5 lbs. Always enjoy the videos of repairing machines.

@howardwtaylor Жыл бұрын

I think it will be right around 30 lbs. Good on you for taking the time to get it working properly!

@markfergerson2145 Жыл бұрын

Sixty two and a half pounds. Yes, we were watching very carefully as you maneuvered those large heavy items with great delicacy and respect. I already knew you were in the habit since you still have all your fingers but still, it was good to see. ;) The one plate you let fall had my heart in my throat for just a second until I realized you weren't anywhere near underneath it. Can't wait for the rest of the rebuild, and here's hoping you can do all of it in your shop. I'm having trouble imagining you uprooting that monster and risking transporting it again.

@aklein318 Жыл бұрын

Hey will, one day, when you've gotta remove a bearing like that again, hit the casting around it with a hammer. JUST LIKE when you remove a ball joint from a knuckle. The shock sets it free.

@InquisitorJesus Жыл бұрын

64.8 lbs is my wager. It’s always fun following along on your mechanical adventures.

@dryroasted5599 Жыл бұрын

68 lbs. I'm impressed that you aren't intimidated by those huge cast pieces that you can't replace. I'd be terrified of making a mistake that ruins the hammer.

@jeffbuller6708 Жыл бұрын

38 lbs. While I was relatively confident that you weren't going to tip this one over, I was halfway waiting for that entire casting around the bearing to crack. Glad it didn't though!!!

@melgillham462 Жыл бұрын

25 lbs. Bronze is heavy. I'm glad it slipped and turned loose. I've come across bearings similar to that with set screws that we only found after degreasing. Ruining the pullers etc.🤣