Wilwood DPHA Brake Kit Install - Integra Daily Track Build
Рет қаралды 8,029
Күн бұрынToday we install this amazing big brake kit upgrade for the Integra daily/track car build. This 4 pot Wilwood DPHA Kit is an amazing upgrade for any Honda/Acura. It is the perfect budget big brake kit. I hope you enjoy this install video.
Stop Tech Stainless Steel Brake Lines: shop.advanceautoparts.com/p/s...
Wilwood DPHA Kit:
jhpusa.com/collections/wilwoo...
Direct Bolt-on Forged Caliper Vehicle Compatibility List:
*Designed to be used on Honda/Acura OE spindles that support factory 10.2" sized front rotors
Acura Legend 1986-1990
Acura Integra 1990-1996 (all)
Acura Integra 1997-2001 (all, excluding Type-R)
Honda Accord 1989 LXI
Honda Accord 1988 LXI / SEI
Honda Accord 1989 SEI
Honda Prelude 1989-1991 Si / SE
Honda Prelude 1988 SI / SE Late Model
Honda Civic 1996-2000 Coupe EX
Honda Civic 1993-1995 Coupe EX AT
Honda Civic 1993-1995 Coupe EX Manual
Honda Civic 1994-1995 Coupe EX w/ Rear Disc
Honda Civic 1999-2000 Coupe Si
Honda Civic 2005 DX / HX / VP Models
Honda Civic 2004-2005 EX / GX / LX / SE
Honda Civic 2001-2003 EX / GX Models
Honda Civic 1994-1995 Hatchback Si w/ABS
Honda Civic 1990-2000 Sedan EX
Honda Civic 1992-1995 Sedan EX w/ Rear Disc
Honda Civic 1996 Sedan LX
Honda Civic 1994-1995 Sedan LX w/ Auto
Honda Civic 1994-1995 Sedan LX w/ Manual
Honda Civic 2002-2003 Si
I hope you enjoy the install video and the route I am going with this Integra. Let me know what you think in the comments below.
I appreciate all the support. If you have any questions leave a comment or message me on Instagram.
Follow me on Instagram: @CZ_Mate
cz_mate?...
⬇️ Check Out My Friends Channels ⬇️
KBros: / kbros
Allen Spec: / sneaky954
JZChris92: / 7mgtebeast
Thanks for watching 👊 🤟
Don't forget to Like, Comment & Subscribe.
Music: Dizaro X Daloka - Inside Your Eyes
/ dizarofr
/ dizaro
#Wilwood #DPHA #Integra #DC2
@CZMate 2 жыл бұрын
Are you guys looking forward to this daily track car build? Have you raced on a track before? Comment Below ⬇️
@patb8852 2 жыл бұрын
Can't wait to see what else you do to the Integra. I am excited for this build series. I like the idea of a good daily that can be tracked. I have only been to a drag stip one time for test and tune. It was fun but always wanted to hit a road course.
@CZMate 2 жыл бұрын
@@patb8852 thank you, I am excited as well. I hope this build and series shows people it doesn't matter if you have a fast car, a lot of money or anything of that. You can still have fun with your car and take it to the track. I think drag racing would be fun to do once just to say I have but road racing has always been something I have wanted to do. Thanks for sharing
@ambidexstress 2 жыл бұрын
Those brakes look so dam good
@CZMate 2 жыл бұрын
Thank you. I am very happy with them. They are truly worth the money if you want some great brakes for a good price. Thank you for the support. 👊🤟
@cruzn10468 5 ай бұрын
Just got mine this week. Thanks for the vid 💪
@CZMate 5 ай бұрын
They work great. I loved the little bit of time I had with them. I have then packed away now going to be going on my new civic project
@proudwifey4005 2 жыл бұрын
I had fun helping you babe. Out of my comfort zone to be in a vlog but well worth it ❤️❤️❤️. Love you handsome
@CZMate 2 жыл бұрын
You did an amazing job pumping my brakes and letting the fluid 💦💦💦 Made my brake pedal hard for me. 🤣
@xStackSats 2 жыл бұрын
That blue, bronze, and white pop so nice! Keep it up
@CZMate 2 жыл бұрын
Color combo on point 👌 😁 Thanks for the support broski. 👊🤟
@LeonEwerkz 2 жыл бұрын
Bro I felt your pain when that bolt broke..😂😂 that’s literally me all the time sadly…😭😭
@CZMate 2 жыл бұрын
Idk what I was thinking. I knew it didn't have to be tight but was worked up in the moment. Lol all I was thinking was I hope I can find one today I have to go to work tomorrow. Lol thanks for watching and commenting. I appreciate the support 👊🤟
@LeonEwerkz 2 жыл бұрын
@@CZMate lmao we all been there brotha lol. And no problem bro always glad to show love💪🏽🍻
@CZMate 2 жыл бұрын
👊🤟
@oscar1072 2 жыл бұрын
nice video, i’m sorry about your integra
@CZMate 2 жыл бұрын
Thank you for watching and commenting. I still miss the Integra but the new car is pretty nice too. Thanks for the support
@macysmith9141 2 жыл бұрын
good video bro!
@CZMate 2 жыл бұрын
Thank you. I appreciate the support. New maxpeedingrods video coming this week 🤫😁 stay tuned for that. 👊
@xFurrySarah-bp5oi Жыл бұрын
The blue looks good
@CZMate Жыл бұрын
Thank you for watching and commenting
@dpt2s 2 жыл бұрын
My brakes are stock. Your brakes are dope!!
@CZMate 2 жыл бұрын
😊 I see you looking at them while making your rounds 😏🤫
@wavejamrgaming6481 2 жыл бұрын
thank you for the information! i will have to do this to my integra too!
@CZMate 2 жыл бұрын
It's a great upgrade and a good price too. Thanks for watching and commenting. I appreciate the support 👊🤟
@patb8852 2 жыл бұрын
Great video like always. I like the fact you never try hiding your mistakes. It makes it better for people watching knowing things happen and everything doesn't go smoothly. You just have to work through it. "Thanks for letting it squirt 💦" 🤣 that had me lmao
@CZMate 2 жыл бұрын
Thank you 🙏🙏 I try to stay 100% true about things, because like I said things go wrong a 1 hour job can turn into a 3 hour job. You just have to work things out. Thanks for all the support in all my videos. 👊🤟
@scottcraft7690 2 жыл бұрын
Those calipers look really good! I wouldn’t mind getting some in the future.
@CZMate 2 жыл бұрын
I have wanted them for a while and since my brake pads were worn out I knew this was the prefect time to get them. It is really a great kit and super easy to change pads in the future. Thank you for the support and for commenting. 👊🤟
@scottcraft7690 2 жыл бұрын
@@CZMate I checked the link for them and they aren’t as expensive as I thought they would be. I’ll have to put some money aside for them in the future.
@CZMate 2 жыл бұрын
They use to be $30 cheaper on JHPUSA. I order it from them because they had the blue. If you want the red or black you can find other sites that have them for a little cheaper too. Thanks again for the support 👊
@scottcraft7690 2 жыл бұрын
@@CZMate My car is red so I’d prefer red. Thanks and you’re welcome.
@CZMate 2 жыл бұрын
@@scottcraft7690 nice. If you have any other questions later on feel free to message me on Instagram
@Lil_Javi21 2 жыл бұрын
Great video learned something new
@CZMate 2 жыл бұрын
Thank you, I am glad I could teach you something. Let me know if you ever have anything questions. Thanks for watching and commenting. I appreciate the support 👊🤟
@ChrisBuilt92 2 жыл бұрын
Looks great! Can’t wait to see them in use
@CZMate 2 жыл бұрын
Thanks for always supporting broski. Just trying to be cool like you were with your hatch. 😁
@Isoswaggy_dc2 2 жыл бұрын
I just ordered these 💪
@CZMate 2 жыл бұрын
Nice 💪 I love them. Thanks for watching and commenting. I appreciate the support.
@Isoswaggy_dc2 2 жыл бұрын
@@CZMate no problem I am new to your channel, literally just found u and subscribed. I'll add u on IG also
@CZMate 2 жыл бұрын
Thank you. I hope you enjoy the videos. I appreciate the comments let me know what people like and what I can work on. Thanks again for the support 👊🤟
@RicoIX 5 ай бұрын
fire
@CZMate 5 ай бұрын
👊🔥🔥🔥🔥
@vtecryan6958 2 жыл бұрын
Sick brake kit. The blue looks so good.
@CZMate 2 жыл бұрын
Thank you. The blue looked so good on the Integra.
@ricertuner002 2 жыл бұрын
Super clean Integra. The Brakes look great on it.
@CZMate 2 жыл бұрын
Thanks you for commenting and watching. It was a great car when I had it, sadly it was totaled just a few months after this video 😫
@josha7548 2 жыл бұрын
Those are nice , do they have them for a crx
@CZMate 2 жыл бұрын
There is a full list in the description from their website. It doesn't list CRX but does say 90-00 civic. And this "*Designed to be used on Honda/Acura OE spindles that support factory 10.2" sized front rotors" I think if you have upgraded spindles from a Civic it would work. I hope that helps. If you have any more questions let me know and I can help figure it out. Thanks for watching and supporting. 👊🤟
@patb8852 2 жыл бұрын
🚗🏁
@CZMate 2 жыл бұрын
That is the plan 🚗💨💨🏁
@Ganstergrom 2 жыл бұрын
You need to use a impact screwdriver that you use a hammer.
@CZMate 2 жыл бұрын
It's ok the list of tools to buy. I forgot about those. Thanks for sharing. Thanks for watching and commenting. I appreciate the support 👊
@reglus15 2 жыл бұрын
Wildwood got cheap banjo bolt. You're not the only one with broke banjo bolt.
@CZMate 2 жыл бұрын
😅 That is good to know. Lol I wasn't thinking and tightened it way to much. Thanks for watching and commenting. I appreciate the support. 👊🤟
@kungfujiujitsufliptrick4832 9 ай бұрын
yeah so did thatdudeinblue's friend lmao
@reglus15 9 ай бұрын
@@kungfujiujitsufliptrick4832 hahaha I had forgotten about that video. Lmao the integra was up for at least 2-3 days because of the banjo bolt lol
@2.0_brittt Жыл бұрын
Thank you for actually putting the kit in the description bro, probably gonna get it next paycheck
@CZMate Жыл бұрын
I try to leave links to all parts used in my videos. I loved the kit and the blue looks amazing . Still have the brake kit just need a new project car. Thanks for watching and commenting. I appreciate the support
@joemartini6909 2 жыл бұрын
Impact screwdriver for the caliper screws
@CZMate 2 жыл бұрын
Yea I forgot about those that would of been helpful. Thanks for commenting and watching. I appreciate the support 👊 🤟
@M_arias 2 жыл бұрын
I got a 94 civic EG with 15in wheels and I’m wondering if those brakes will fit ? Also the brakes look so good
@CZMate 2 жыл бұрын
My wheels are Rota Circuit 10 wheels 15x6.5 and I believe +38 offset. In the description of the Wilwood it says clears 15" wheels and most 15" OEM wheels. Thanks for watching and supporting. 👊🤟 Let me know if you have any other questions
@M_arias 2 жыл бұрын
@@CZMate thank you bro 😎
@CZMate 2 жыл бұрын
@@M_arias of course. If you ever have any other questions feel free to message me on Instagram. I am always willing to try and help. 👊
@joedm 2 жыл бұрын
What size and offset are your wheels? Good channel btw
@CZMate 2 жыл бұрын
Thank you. They are Rota Circuit 10 wheels 15x6.5 and I believe +38 offset. In the description of the Wilwood it says clears 15" wheels and most 15" own wheels. Thanks for watching and supporting. 👊🤟
@roejogan4009 2 жыл бұрын
Where do I get them man
@CZMate 2 жыл бұрын
I got them from JHPUSA. The link to it is in the description. I got the brake lines from ebay but they are out now so I just found a link to the cheapest ones I found. Let me know if you have any other questions. Thanks for watching and commenting. I appreciate the support 👊🤟
@LazyHobo32 2 жыл бұрын
Great video, very informative. What are your wheel specs and offset? Worried that the wheels I want for my integra won't clear these calipers
@CZMate 2 жыл бұрын
They are Rota Circuit 10, 15x6.5 and I believe +38 offset. In the description of the Wilwood it mentioned it clear 15" wheels and most OEM 15" wheels. Thank you for watching and commenting. I appreciate the support. 👊🤟
@moosymoose7083 2 жыл бұрын
is that the oem master cylinder?
@CZMate 2 жыл бұрын
Yea everything else is OEM. Thanks for watching and commenting. Let me know if you have any other questions. Thanks for the support 👊🤟
@SirBoostAl0t 2 жыл бұрын
Nobody gonna mention those crush washers? You over tightened the bolt trying to stop the leak… but the reason it was leaking was because you didn’t install the crush washers right…
@CZMate 2 жыл бұрын
No it was loose hand tight so I could move the brake line around while getting it in the right spot. Forgot to tighten it when I unhooked the old line and hooked up the new. Thanks for mentioning that just incase I did forget. Thanks for watching and supporting 👊
@SirBoostAl0t 2 жыл бұрын
@@CZMate crush washers. One goes between the line and the caliper, the other goes between the nut and brake line. They do not stack
@CZMate 2 жыл бұрын
Oh yes, someone message me about that. I wasn't thinking and was just looking at the picture showing both washers on the Banjo bolt. I appreciate it broski 👊
@davidcastaneda3757 2 жыл бұрын
Can I do this to a 93 Honda prelude
@CZMate 2 жыл бұрын
This is what is in the description. Honda Prelude 1989-1991 Si / SE Honda Prelude 1988 SI / SE Late Model But maybe do some research and see if there is a way it can work. Thanks for watching and commenting.
@kungfujiujitsufliptrick4832 9 ай бұрын
do you need to replace the rotors too? just bought new ones and i seen these brakes for sale but just by themselves no rotors
@CZMate 9 ай бұрын
No you do not. The rotors are the same size as stock.
@trevorgill86 2 жыл бұрын
I just installed these and really appreciate the video man. Couple quick questions if you don’t mind: I’ve read of some people putting washers for caliper mount between knuckle and caliper to act as spacer, and some just use as a washer between bolt head and knuckle - what did you do? Also, do the pads need grease similar to the OE setup? Or do they just go in dry? Thanks dude!
@CZMate 2 жыл бұрын
The pads I put a little grease in the back. I have heard people also using washers as spacers. I just put them one with the provided hardware and everything went good. Let me know if you have any other questions. Hope your install went well. Thanks for watching and commenting. I appreciate the support 👊🤟
@trevorgill86 2 жыл бұрын
@@CZMate thank you! I just spoke with Wilwood technical support and they confirmed the washer should go between bolt head and knuckle - not to serve as spacer. Also recommended no grease for pads - dry load them.
@CZMate 2 жыл бұрын
Thanks for the info. For some reason this comment was held in review and just saw it. Well I don't have the wilwoods anymore.... Recent video shows what happen 😭
@jimhiscott2918 Жыл бұрын
Why do you have both crush washers on one side of the banjo bolt ??????
@CZMate Жыл бұрын
Because I messed up and wasn't thinking lol 😂
@jimhiscott2918 Жыл бұрын
@@CZMate yes I read that later. As for braking a banjo bolt it happens. They don't take as much tourq as I would like on them. I'm up in the air right now between StopTech lines or Goodridge. Goodridge has been around a long time and I used them on all my road race bikes.
@CZMate Жыл бұрын
They are both good brands. Don't think it would matter which ones you decide to go with.
@Vkandypaint Жыл бұрын
Greta vid! How did you like the wilwood brakes? Did it make a difference ?
@CZMate Жыл бұрын
I loved them for the time u had them on the cat. I didn't get to really teat them out on the track like I wanted before my Integra was totaled. I really liked the and believe they are a great upgrade to have. I still have them and will put them on the next project car. Thanks for watching and communicating
@bigstillow91 11 ай бұрын
Your calipers didnt rub on the rim when you turn? Or do you need spacers?
@CZMate 11 ай бұрын
No spacer was needed. These wilwood fit most 15" oem and aftermarket wheels
@bigstillow91 10 ай бұрын
Do you think they would fit rota slips??
@DJN3m3sis Жыл бұрын
What size and brand of wheels are on it?
@CZMate Жыл бұрын
15" rota circuit 10s
@ecutc3 2 жыл бұрын
Do these clear with ls webs ?
@CZMate 2 жыл бұрын
Their website says clears most factory 15" wheels. That is all I know. Thanks for watching and commenting. I appreciate the support. Let me know if you have any other questions. 👊🤟
@alexanderludena8745 2 жыл бұрын
I just received my set but my calipers are a dull blue and not as bright as yours. I ordered from JHPUSA.
@CZMate 2 жыл бұрын
Weird, maybe get in contact with them and tell them the situation. They have real good customer service. Thanks for watching.
@tr4753 2 жыл бұрын
That is so weird because I just received mine and they’re more of a spoon blue. What the hell
@kahvang7983 2 ай бұрын
whats your wheels spec ? inch and offset
@CZMate 2 ай бұрын
15" and I believe +38
@kahvang7983 2 ай бұрын
@@CZMate thanks for the reply man thats good news i have the same wheels spec so im glad to hear . appreciate man your car is clean
@tr4753 2 жыл бұрын
You’re suppose to double stack the washers? Is that right? Also when bleeding, did you have to bleed the rear too?
@CZMate 2 жыл бұрын
No the washers goes on each side of the brake line. I wasn't thinking when I did it and someone pointed it out to me. I ended up doing the rears the next day. I recommend just bleeding all 4 when you do it. Starting from Passenger rear, driver rear, passenger front and then driver front. Thanks for watching and commenting. I appreciate the support. 👊
@bacon2589 Жыл бұрын
Do you need the stainless steal line? I saw someone used the stock line
@CZMate Жыл бұрын
No you don't. Just a good upgrade while changing them out. Rubber flexes that is why stainless steel lines are better.
@bacon2589 Жыл бұрын
@@CZMate they worth it?
@CZMate Жыл бұрын
If you are upgrading the brakes and want better performance then yes they are worth it. I would buy them again when I upgrade my brakes on my ep3
Rob Dahm
Рет қаралды 347 М.
ItsaProject
Рет қаралды 1,3 М.
Gripworkz
Рет қаралды 30 М.