Great explanation. The balance between stability versus maneuverability exists in all movement it seems!
@TimMcKay56 Жыл бұрын
Sanka: Thanks for checking in! Tim
@dradden1556Ай бұрын
I'm still building my plane . All these vids are helping a great deal. Thank you very much.
@TimMcKay56Ай бұрын
Glad to help!
@cannabisoutlawz Жыл бұрын
Let's Get to It!
@TimMcKay56 Жыл бұрын
Very good! Tim
@rickrader1649 Жыл бұрын
Very informative! Could you do a video on thrust angle and wing incidence sometime? Thanks!
@TimMcKay56 Жыл бұрын
Rick: In the cue. I use a bit of right and down thrust, and 2-3 degrees positive wing incidence. Tim
@airplane-mode8577 Жыл бұрын
Great information and background! I love that you went all the way back to the start if rc planes! I learned some new things, thank you!
@TimMcKay56 Жыл бұрын
AMR: Glad you enjoyed it! Tim
@bertogle4955 Жыл бұрын
THANK YOU I HAVE LEARNED A GREAT DEAL FROM WATCHING YOUR VIDEOS.
@TimMcKay56 Жыл бұрын
Bert: Thanks for checking in! Tim
@randall4411 Жыл бұрын
Good video Tim . Dihedral and incidence . Two of my favorite words . Center of gravity is my # 1 favorite .
@TimMcKay56 Жыл бұрын
Randall: Good choice! Tim
@FreeFlightDigest Жыл бұрын
Great information! Liked!
@TimMcKay56 Жыл бұрын
Thanks! Tim
@davidquerry8869 Жыл бұрын
Nice video Tim.
@TimMcKay56 Жыл бұрын
David: Glad you enjoyed it! Tim
@gameoflife3530 Жыл бұрын
Hi 👋 Tim , you providing good informative stuff 👍 please continue with it 😉
@gameoflife3530 Жыл бұрын
and I have a favor to ask can you give me your oldest flight controller ,here in India 🇮🇳 it's so costly for me to afford
@TimMcKay56 Жыл бұрын
GoL: Thanks for checking in! Tim
@mikenadler7118Ай бұрын
I've wondered why the Wright Brothers didn't go with dihedral and rudder and elevator control, much like birds have, instead of wing warping.
@TimMcKay56Ай бұрын
The Wright Flyer had elevators and rudder. Wing warping was though at the time to be the best way to control roll. Early WW1 fighters used wing warping (Eindecker III). As wings gained strength and stiffness, ailerons became standard. Tim
@rolandotillit28674 ай бұрын
Since the tail wing produces downforce, would anehedral tail wing produce dihedral effect, since the wing is essentially upside down, or would the same principle apply regardless of the direction of the lift vector?
@TimMcKay564 ай бұрын
Good question, not sure of the answer. 🤔 Tim
@aurelioarenas6293 Жыл бұрын
Great explanation. Quick question, what should be the dimension of the horizontal stabilizer related to the wing span? Could you elaborate how the plane will behave if the horizontal stabilizer is too big or too small. Thanks Leo.
@TimMcKay56 Жыл бұрын
Leo: Thanks for checking in! There really is no mathematical relationship to stab size and wingspan for a sport flyer. If the stab size looks about right, that size should work. If in doubt you can make the stab size a bit bigger. Tim
@calimlimfrancisnoah5352 Жыл бұрын
Hey Tim another question on delta models, which is better the push or pull motor?and what is the difference?
@TimMcKay56 Жыл бұрын
No difference, both work fine. 😊 Tim
@willardpearce8218 Жыл бұрын
Hi Tim. I've built a couple of airplanes from a kit. Attempting to build a foamie with your helps. I wrecked a Dynam Hawksky years ago. Broke the nose back 6 inches and the frame in two between the top-mounted engine and the vert. stab. Should I repair that one, or start something fresh like a J3 Cub? Thank you very much!
@TimMcKay56 Жыл бұрын
Willard: Nose is tough to fully repair. Maybe start a new project. 😊 Tim
@willardpearce8218 Жыл бұрын
@@TimMcKay56 Thank you, Tim for such a prompt reply! I'll take your suggestion to start a new one. Do you have any videos on building a J3 Cub, or some plans? I appreciate you help. Willard
@TimMcKay56 Жыл бұрын
Willard: No plans, yet for a J-3. 😊 Tim
@yotehunter3468 Жыл бұрын
So I gotta question for ya, I don't have the brain power or knowledge... I'm building a Dumas Taylorcraft 1814 the 40" Blue and Yellow one... Which I'm stuck on at the moment lol... But anyway I'm so tired of trying to collect the old GWS power systems for my projects, that they suggest... There hard to find, and they want to much for each peice... So my question is, with your knowledge, what power system would you suggest? "Looking for slow flying" I know you get alot from Buzzard Models, anything you think would work from there, "like in a brick system"? Pretty much just wanting the whole pewer system from one place in other words... Any suggestions, with your knowledge would be helpful 😊👍
@TimMcKay56 Жыл бұрын
Yote: Best bet is to go brushless with a lipo battery. Figure out what the weight of the Taylorcraft will be. Go to www.HorizonHobby.com for a chart on E-Flite motors, as they list a model weight suitable for that motor. My guess is a 15 amp ESC and two cell lipo about right. Horizon has very good tech support for these questions. Tim
@yotehunter3468 Жыл бұрын
@@TimMcKay56 Ok I'll go look, thanks...
@yotehunter3468 Жыл бұрын
@@TimMcKay56 Forgot that's actually where I bought it, there suggestion was a GWS setup 🤦♂️
@kf429310 ай бұрын
I built a foamy version of the Prairie Bird, 20" wingspan, 3 channel. Trying to fly it, rog, every time it would get about a meter or less, dip a wing, and crash. Pretty much everything I'm building right now is flying like a Charlie Brown kite. Really frustrated with the hobby to be honest.
@TimMcKay5610 ай бұрын
20" is a short wingspan, not much room for error. Check for no warps, keep weight as light as possible. Tim
@kf429310 ай бұрын
@TimMcKay56 I'm probably going to rebuild the wing. AUW was about 133g with a 300mah 2s battery. In hindsight, I honestly overbuilt it. I essentially put a 20g wing on a 3g trainer, and probably twisted or did something in the process. 🙄