WINNER: How 100 Slices of Plywood Won Me the Battle

Рет қаралды 223,776

Күн бұрын

Disclaimer: Mister Patina and I are friends...! :-)
In this "Restoration Battle" Mister Patina and Me are challenging each other by restoring the same Metal Shear! Hit the like, comment, and share...BOTH VIDEOS! 🙂
Make sure to watch, like and comment Mister Patinas Video: • Worn Metal Shear Resto...
Please vote for a winner: forms.gle/UCY6HNmnjwqoRHYH6
Make sure to subscribe to Mister Patina: / @misterpatina
And...please stay respectful and friendly😉
My Pages
Patreon: / notterriblerestorations
Instagram: / ntrprojects
Facebook: / ntrprojects
Once upon a time I was invited by Mr. Patina to grab a cold one, and as a friend I of course brought a gift. I came by with two mostly identical metal shears in pretty bad condition. So obviously I asked him to do a competition, an offer he couldn’t refuse?
So I took this metal shear apart, cleaned off the dirt from the past 300 years and gave it a good clean. Some of the old grease just came off by scraping. After that I put every part in my sandblasting cabinet and did a lot of metal works afterwards: filing, shaping, sanding, and so on. When the metal work was done, I powder coated the main part in a mix of “antique hammer effects silver” and "RAL 5012 Lichtblau".
The blades were reshaped with a belt grinder, while sanding, I cooled down the blades in water to keep the hardness.
I zinc plated every screw after truning the heads and cutting the thread.
Parts that are moving against each other where cold blued. I also took care of the Mubea Brand Logo and recreated the sticker, which is providing information on cutting limits.
The final test shows, that this shear works perfectly again. I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible! If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-) Thanks for watching!
Hey if you want to support me, you can become my patreon or invite me for a virtual beer via Paypal: paypal.me/NTRBeer Patreon: / notterriblere. . and follow me on Instagram and Facebook / ntrprojects / ntrprojects
Here are the links to the tools and equipment I use:
IMPLOTEX 3000 Compressor: ➡️amzn.to/40Xp5iK
Powder Coating Gun: ➡️amzn.to/3XEnXhk
Laser Engraver https: ➡️amzn.to/3EhzLza
Fein Multimaster MM 700: ➡️amzn.to/3Ia7xrg
Bosch Professional Impact Drill GSB 18V-110 C: ➡️amzn.to/3I7Ttyh
Sandblasting Cabinet 420 Liter: ➡️amzn.to/3S62o89
350 Liter ➡️amzn.to/3IyPj3V
220 Liter ➡️ amzn.to/3IzYMYE
Kamera - Sony AX53: ➡️amzn.to/3Kif4XB
Grabby "McGrabface" Grabson: ➡️amzn.to/3Z506sc
Stay healthy Dr Beer
Music: Elegant Logo by Free Music | / fm_freemusic Music promoted by www.free-stock-music.com Creative Commons Attribution 3.0 Unported License creativecommons.org/licenses/...
Result Scene:
Timeless - Lauren Duski from KZfaq audio library
Your Lullaby - Per-Olov Kindgren & The Gaugolon Orchestra
with friendly permission by: Per-Olov Kindgren kzfaq.info/love/DDq... Jimmy Quango kzfaq.info/love/DTh... and The Gaugolon Orchestra / gaugolon .
00:00 - Intro
00:50 - Chapter 1: Mubea Disassembly
04:03 - Chapter 2: Powder Coating
07:43 - Chapter 3: Zinc Plating
11:23 - Chapter 4: Cold Bluing
12:43 - Chapter 5: Sharpening
14:15 - Chapter 6: The Logo
15:28 - Chapter 7: Mounting Plates
19:50 - Chapter 8: The Handle
20:27 - Chapter 9: Timeout/ Beer Tasting
21:29 - Chapter 10: Mubea Assembly
26:21 - Chapter 11: Testing

Пікірлер: 476

@nikxohs3925 Жыл бұрын

what did you restore??? you just clean and paint

@ziggy2652 Жыл бұрын

Would sure love to see your cleaning of a tool look that good 😁

@nikxohs3925 Жыл бұрын

@@ziggy2652 tools are for work , not decoration

@ziggy2652 Жыл бұрын

@nik xohs true but the tool was not working properly before he "cleaned it"

@nikxohs3925 Жыл бұрын

@@ziggy2652 yes clean it

@karthikaple4618 Жыл бұрын

😊 😊😊

@Drowronin Жыл бұрын

The real winner is the viewer.

@smashyrashy Жыл бұрын

There are no winners among people who watch youtube all the time

@vonHannersdorf Жыл бұрын

Exactly! Mister Patina and Dr. Beer has awesome skills and beautiful videos so we viewers are blessed with their work. And true winners!

@BB_Chaptsick Жыл бұрын

Both were very impressive video to watch. I agree.

@TapscottJ Жыл бұрын

Well stated!!!

@Psammead21 Жыл бұрын

Deep, profound and accurate 👌

@Bazza.baz224 Жыл бұрын

I watched Mr Patina's first and thought "no way will Dr Beer beat that". Was I wrong! Yours was on another level 🏆

@misterpatina Жыл бұрын

sweet!

@NTRprojects Жыл бұрын

Thank you. that was really a lot of fun and your result is of exceptional quality. I think its so awesome how different both turned out

@auChevalierRed Жыл бұрын

@@NTRprojects I'm glad you both agree. Wt's whhat makes your two channels special to me is how you both propose quality craftsmanship, respect for the piece you are restoring,, a friendly environment and your two distinct ways though do show through every time. That was why I had suggested ending you both an identical item to restore. You could use your creativity and preferred future uses to show two different, yet equally worthwhile results. So many channels are plain in that respect. Your channels aren't devoid of personality in the background, without you harassing your viewers with 3 quarters of the video about your digestive system or your nail polish.

@-Deena. Жыл бұрын

Mister P! You let yourself down and you let me down. You need to go away and have a long hard think! I mean, leaving the horrible letters on the cheap new bolts! Shame! However Dr. B, whilst it blew Mr P. out of the water, that pinstriping was shockingly shoddy. Conclusion: Room for improvement but Dr B slam dunks it. Rematch. Best of three! 🧡

@On_fire_send_help Жыл бұрын

I mean im all for constructive criticism, but thats a bit harsh doncha think?

@-Deena. Жыл бұрын

@@On_fire_send_help Just teasing the guys 😁🧡

@condar419 Жыл бұрын

I love that you two are having this friendly competition. Excellent job, I love the 'herringbone' effect of the wooden pieces. I've watched both videos, so I'm off to vote now.

@mookystank 14 күн бұрын

This is great. I came here from Mister Patina and having seen references to you and comments from you in his videos. The fact that you guys are friends in real life and interact in real life and through these videos is very cool. You two have provided hours of entertainment for me and your videos help me mentally. Thank you both so much.

@Spinatbroetchen Жыл бұрын

This is a really hard choice. Both of you are true masters with a lot of love for detail and a great craftsmanship. Thank you for your videos.

@Anmobgoccult20 Жыл бұрын

Well done, without words, for such precise work and craftsmanship, the great German quality, one can only bow down, respect from old BG.

@rickmiller4202 24 күн бұрын

Liked the Bob Ross reference with the, ' happy little accident', line. That base is phenomenal. Seen from the right angle it has a 3-D look, like a huge stairway. Greatly pronounced during the oiling. Very well done.

@paulsweeney5642 Жыл бұрын

It’s all fantastic but that wood looks amazing. Off to watch Mr P now.

@alexdeleon7135 Жыл бұрын

This has to be the best restoration you've ever done on this channel! This shear was revived from the dead! The mounting table had your own style in design. It gives the finished project its own individuality. This was outstanding!

@okieproperty9141 Жыл бұрын

I love the look and especially the base you made. You took the time to make it versatile and UN-complicated. Your work is very good and I enjoyed the video. What you did made it go over the top compared to Mr. Patina. Although Mr. Patina made it simple yet elegant in doing. Loved both. For showmanship, you win. For being competitive and simple, he does. thanks to you both.

@bobvalli9430 Жыл бұрын

The way you constructed the base was unbelievable. WOW!!!!! It had such a dimensional appearance. Again, all I can say is....WOW!!!!

@frankmurphy5 Жыл бұрын

Yeah, you won for sure. The woodwork is beautiful. But even without that you still won. You're both really good at this, but I think you wanted it more.

@davesmith5656 Жыл бұрын

Love the way you restored that old wooden shipping crate! It look better than it was originally! Two restoration projects, one for the cutter, and one for the shipping crate!!

@TheDragonNinjaLord 14 күн бұрын

That's such a cool blue! I love your color choices pretty often. :D

@shawnstamp1635 Жыл бұрын

I totally agree the viewers won here. You both put your own twist on the details. Well done.

@shedmanx3640 Жыл бұрын

You both have done excellent work. Your genius move in repurposing old packing crates into that stunning wooden base wins my vote. 😍

@yanniskolymvanos537 Жыл бұрын

Wow!! That wooden base is so trippy!! Lovely stuff as usual

@jfleser88 Жыл бұрын

The zinc plating of the hardware was sublime and mesmerizing. Nice work. I choose your work because of your skill and editing skill.

@cantinetormanshow3757 Жыл бұрын

i watched both the two videos, and for me you are the winner.

@doriWyo Жыл бұрын

So close. But I like the wood work you did. One vote for you!

@andyweberg2928 Жыл бұрын

Excellent work!! I'm a big fan of the cold blueing- that tipped my vote to your side on the battle :) The yellow pinstripe paint needed to be a bit thicker for a better coating but I appreciated the style! Double points for repurposing the ply for the handle and secondary base, very resourceful! MORE BATTLES!

@jaimegomezgarcia7599 Жыл бұрын

Great work! The basis is excellent work. You can see that it has been a considerable amount of work. Now, time to watch the Mister Patina's video.

@assessor1276 Жыл бұрын

Beautiful - absolutely perfect.

@Vickie-Bligh Жыл бұрын

Dr B., this was fun to watch and that you were in 'competition with Mr P made it even more so. Nicely restored and very well filmed. Thanks for sharing.

@jaajar Жыл бұрын

Mr Patina's restoration was good but you win 🙂 Especially liked the scrapwood mosaic base you made. Beautiful and a little bit of 3d effect too.

@nobuckle40 Жыл бұрын

Since it's a contest and we are the judges, I have created categories by which each restoration is to be judged. The categories are Disassembly, Cleaning and Rust Removal, Hardware and Casting Improvement, Paint Preparation, Painting, Originality, Re-assembly, and Operation. Each category has a scale of 1-5 (1 is lowest score, 5 is highest score) for a possible total of 40 points. Disassembly - 5 Cleaning and Rust Removal - 5 Hardware and Casting Improvement - 5 Paint Preparation - 5 Painting - 3 (The pin striping was thin and uneven) Originality - 5 (does not include the new mounting base) Re-assembly - 5 Operation - 5 TOTAL = 38 Your restoration turned out beautifully! You went above and beyond by paying careful attention to the details. I feel that the paint you chose to use was as close to the original as possible. Very nicely done.

@NTRprojects Жыл бұрын

Haha what a nice idea of you. You yourself went above and beyond with this Feedback. Much appreciated how much thought you put into this

@nobuckle40 Жыл бұрын

@@NTRprojects I sort of patterned the idea the same way you rate the beers that you try. 😁

@terrynicholls601 Жыл бұрын

I believe you just took the honours, sir! Lovely job.

@StealthDonut1 Жыл бұрын

The work here is beyond gorgeous. You did everything required for a great showdown, plus you included a delicious beer review! Next up, you guys should get together and do a collaboration on a single BIG project together! I salute you, Dr. Beer!

@Paperghost Жыл бұрын

Now thats what I call a restoration. Wonderful job.

@madkingragnarok Жыл бұрын

Now we need the trifecta. Mister Patina, Not Terrible Restorations, and my mechanics

@NTRprojects Жыл бұрын

Okay, you ask him 😜

@pamelabraman7217 Жыл бұрын

😊 very nice, love the addition of the wood grip, so much more comfortable for the user. Bonus points for the wood joining. Loved both videos, but I vote for you on the win. 👍

@xabierqataquapit7202 Жыл бұрын

Entry: 4/6 - tasty on first look but not sensational Aftertaste: 6/6 - enjoyed the iron filings Body: 6/6 - loved the body work and woodworking Colour: 8/6 - perfect pinstripping Bitterness: 4/6 - pleasant sand blasting Acidity: 5/6 - loved the zinc plating and cold blueing Fizz: 8/6 - after so many hours of work on the craftsman part ... it was very refreshing to watch 41/42 .... Rank # 1 / 2 ... Definitely would watch again

@NTRprojects Жыл бұрын

What a fizzy and refreshing Feedback. Thanks a lot

@robertbeer2584 Жыл бұрын

Epic job my brother from across the pond, I wont reveal my vote but the stundent has learned well!!!!

@davidcoats1037 Жыл бұрын

Stunning restoration. Brilliant editing! Stop motion animation is always appreciated. Cool addition with the wood reclamation. 😃👍🏼

@GeorgeLowrey Жыл бұрын

You've outdone yourself! Beautiful restoration!

@PROUDLY_LEBANESE Жыл бұрын

Excellent work, a real pleasure to contemplate these restorations. 👏👏👏👏👏👏Greetings from Argentina.

@midei Жыл бұрын

Tough decision. You both are very good. But that wooden base made my mind! I have enjoyed the battle enormously, anyway. Please do more like this one! Thank you very much.

@patv6897 Жыл бұрын

J'ai attendu la bière pendant 20 minutes 😊, j'ai mangé le pan-bagnat de la base sans boire, heureusement il y avait de la bonne huile d'olive 😂 ! J'ai un peu regretté de ne pas voir le détail de fabrication de l'étiquette 😢 . J'ai terminé le visionnage en me disant "décidément ce gars est un champion de la restauration, on le savait déjà mais il s'améliore toujours" Merci encore et bravo pour ce splendide résultat fonctionnel. Patrick

@NTRprojects Жыл бұрын

Oh Patrick, merci beaucoup pour cette histoire et ce feed-back :)

@troyboy4345 Жыл бұрын

This is the winner 100% ! .... Superb attention to detail with outstanding touches added.

@edconway9072 Жыл бұрын

Mr. P ran into a buzz saw in this challenge. You took each and every step to the next level. The handle was the best example, the herringbone pattern was centered on the handle, the holes were right down the centerline and the screw slots aligned with the centerline. Masterful work sir, makes me -round to be a patron. Thanks, Ed

@tobiaslindstrom660 Жыл бұрын

Congratulations. You are the winner. And you got me as a new subscriber. ✌️

@NTRprojects Жыл бұрын

Welcome to the channel Tobias and thank you

@philipB31 Жыл бұрын

Nice work - I can’t imagine you aren’t pleased with the result.

@willhayden4311 Жыл бұрын

Watched both. You win as far as I'm concerned! Nice job.

@theeb1800 Жыл бұрын

Congratulations, you won the battle

@AirwavesEnglish Жыл бұрын

OMG that 'snick' sound while snipping the tin at the end of the video.👌

@peterhobson3262 Жыл бұрын

Having watched both videos I'm giving my vote to you, Dr. Beer. The shears were similar but not identical. I feel you got the more difficult shear to restore. You both did good restorations of the shears. However you made two mounts, one for mounting on a work table and the wooden mount, which was excellent. You also made a very nice wooden handle. Mr. Patina didn't make mounts or a handle. You did pin striping on the body, which matched the pin striping on the original. Plus, of course, you evaluated a beer.

@oleque1 Жыл бұрын

You nailed it. Great job!

@chubbyschoices9701 Жыл бұрын

You win...that wood handle is beautiful...nice work dude

@freddystpierre9106 Жыл бұрын

You both did a great job but, there can only be one winner and, I think it is you

@Mlenski_restorations Жыл бұрын

Looks perfect. I am going to watch the second competitor's work. Great idea.

@raimundweinstein7690 4 ай бұрын

Ihre Restaurierungsarbeiten sind in jeglicher Hinsicht außergewöhnlich. Die Videos sind von toller Qualität. Es macht Freude diese Arbeiten online verfolgen zu können

@chrisross-smith4358 6 ай бұрын

That is a work of art, no wonder you won. That wooden base looks 3d, amazing effect. Great effort well done sir...😊 👍

@jamescraig5421 Жыл бұрын

Excellent Restoration Bro. Fit for another 50years great job Bro.👌➕

@daddylovesfaith Жыл бұрын

Enjoyed both restorations. This is the winner for me. More variety in processes. Great work guys.

@Psammead21 Жыл бұрын

I can't split you boys. I said it before the challenge videos were released. But I've at last had the chance to watch both and I've cast my votes. May the best man win ⚔🛠

@Psammead21 Жыл бұрын

Ooh, and I forgot to say that my OCD once again says "Hi and much respect!!" to yours 👌👋xx

@user-wl5qj5fq2n Жыл бұрын

Both video are excellent, Dear Sirs thank you a lot for your art! Nevertheless in my opinion, Dr Beer's project was more structured and more technologies have been applied. Hope we will have the opportunity to enjoy your new projects.

@jean-baptistegaridel8787 Жыл бұрын

My son and I are huge fan of restoration videos and this event was great. We've voted for you because of your attention to detail and the extra mile you went. Fantastic work !

@georgebrown8312 11 ай бұрын

Magnificent job you did restoring the metal cutting shears to working order. It looks much better and it works like a charm too. Excellent work.

@kyfho47 4 ай бұрын

Now THAT was a beautiful restoration. Well done!

@nathanhunt54 Жыл бұрын

This was a great idea! Friend amongst friend having fun doing what they love. This has to be one the toughest decisions I've had to make in a while. Mr. Patina was definitely up to challenge though with his magic tricks (snapping fingers and prep work magically being done!)... But beer... And wood workery was an equally impressive touch! I have voted, but my hat is tipped to the both of you! Well played, fellas! 🥂

@petat13 Жыл бұрын

Thanks so much. I enjoyed both restorations. It’s interesting to see how differently you both approach the same task. Lovely result at the end. The base and handle are quite special and add a finesse to the over all finish.

@alexanderalbach468 Жыл бұрын

Ach, einfach immer wieder schön jemanden zuzusehen, der ne Ahnung von dem hat, was er tut ❤

@anisatania4036 Жыл бұрын

Of course it would turn out great. But sorry the part that I really loved from this video is actually the wood base 😂😂 Great work nonetheless! How long did it take you two to complete the project? I bet the sanding alone is really time consuming 😂 Heading to watch Mister Patina now!

@NTRprojects Жыл бұрын

Hej Anisa. I think it took us both around 3 weeks. I hope you are getting better soon and everything will come together again

@ianmurrell209 Жыл бұрын

Great restoration. They only thing I'd do different would be adding some more rubbers stoppers about centre of the wooden base. I imagine there will be lots of force at that point. Or adding some metal reinforcement.

@NTRprojects Жыл бұрын

I think you are right. I will add some

@VorlonFrog Жыл бұрын

This project / competition deserves more than one beer!

@righteothenable Жыл бұрын

Beautiful restore, as always. It is so soothing watching your videos. The attention to detail, the craftsmanship, the care for the project itself.

@chriswareham Жыл бұрын

Off to watch Mr Patina's video, but you've set a high bar with your one! One of things I love about these kinds of restorations is the reuse of things in a "disposable" age, and the upcycling of the wood was an excellent example of this.

@FuturePrison Жыл бұрын

Awesome restoration!. Your videos are also going from strength to strength. And although I haven't watched MrPatina's video yet, I already don't want to have to choose!!! 😁

@newcomerjason7791 Жыл бұрын

I watched both restorations....both Mr Patina and yourself did incredible work....but your wood working puts yours over the top. It's an incredible detail to add.

@widowmakerdesign Жыл бұрын

You’re just showing off! I’m surprised you didn’t carve a groove and inlay gold instead of the yellow pinstripe🤣🤣 Beautiful job!

@TinaMdot Жыл бұрын

I don't know, if it is fair to judge the two renovations as equal. Sure, the metal cutters were almost the same, but you have, undoubtedly, the better tools and were Patina strived for smoothness you obtained the original hammered surface. All in all I would say it's a tie, but your angular sharpened blades gave you the win, imo.

@NTRprojects Жыл бұрын

Hey Tina. I think he also did the angular blade, but didnt show it in the video. So we are back to a tie I guess

@colleenmccarthy-evans3149 Жыл бұрын

wow, stunningly beautiful and amazingly functional!

@troynewly 7 ай бұрын

Oh Man, you are good, precise, exacting, clever! Good Work

@NTRprojects 7 ай бұрын

Thank you for crawling into the channel. Thanks for all the comments

@fasteddy07 Жыл бұрын

Excellent renovation! 💪

@squedley Жыл бұрын

I liked this. Future restorations need to be on identical pieces so we can provide fair critiques.

@jamesriordan3494 Жыл бұрын

I think you win this, even excluding the beer tasting and wooden parts. “Not terrible” ! 😉

@davesmith5656 Жыл бұрын

Both are outstanding! The two machines are not exactly the same. The end result function is the essential thing. For function, Dr. Beer hand sanded the blades, removing less metal, and did not use shims. Was that a difference in the blades, one set more worn than the other?? Both cut metal as required. For paint, Dr. Beer wins, for more thought, and I happen to love that look and color. For the base and handle ... WOW! And interchangeable two bases are better than one. (The parts about nickel plating bolts, then turning, confused me. Mr. Patina was less complicated, but the video progress was clearer.) In this competition, Dr. Beer! But what about the next one?? Different skills?? Who will win that??

@NTRprojects Жыл бұрын

Hey dave thank you for the outstanding Feedback. I have to ask, since youre the second one to think that i turned the screws after plating. I did not Do so. Maybe the chapter headline was confusing. I first sandblasted, then sanded and turned, then plated

@NTRprojects Жыл бұрын

And as im writing i realize that i gave the impression that the sandblasting step Was already the zinc plated parts

@NTRprojects Жыл бұрын

I will add a comment to clarify in the subtitles

@NTRprojects Жыл бұрын

Added two subtitles at 7:42 maybe that clarifies

@davesmith5656 Жыл бұрын

@@NTRprojects --- Yes, at 7:46 the red chapter heading say "Zinc Plating" (and "Chapter 3"). I thought, "Oh, OK, those are zinc plated parts". That's just my bad, being so used to consumer items in stores, advertising campaigns, and so forth. People who know nothing about engines will buy a car for the upholstery and the paint color. I have not ever seen freshly sand blasted parts in real life, nor freshly zinc plated parts. "First I sandblasted the parts as well" clarifies it. P.S. You guys didn't have "Who buys the beer" bet on this, did you?? Edit added: "Chapter 3: Preparations for Zinc Plating" (or, "Sandblasting"), then at 10:35 "Ready for Zinc Plating", would have been unmistakable, but most apparently understood it the way you presented it.

@NJZF Жыл бұрын

I have seen both of the videos. Both of you made an excelent work but you decided to raise de bar one level more adding the mounting surface and the enhanced grip with the recycled wood plates. Over all hats off to both of you. You made a great work

@Pizzpott Жыл бұрын

For me you are the winner. The metallic paint and stripe matched the original, the base and handle were an incredible addition to what would be expected as a standard. Superb.

@strydr36 Жыл бұрын

That wood base is amazing. Hard to believe that its made from the shipping box.

@jeffbaranowski6695 Жыл бұрын

Most excellent! You both did amazing jobs. Sorry, but I have to give it to Mister Patina. I feel he stayed truer to "restoration" without additions or modifications.

@Susied7 Жыл бұрын

Beautiful work.

@paulc38125 Жыл бұрын

Those locking nuts look almost like the ones used on Pratt & Whitney radial aircraft engines WWII era. A real joy to put on in the tight spaces around the cylinders.

@billdooling5859 Жыл бұрын

You win. Both were dope but yours was above and beyond. No bias, i came here as a mister patina fan

@suhayl5157 Жыл бұрын

even though I never liked your beer section, but there is no doubt you are multi talented; that wood work was genius.

@NTRprojects Жыл бұрын

I always add chapters to my Videos, so in the timeline you can easily skip through the beer section

@thepagan5432 Жыл бұрын

I enjoyed watching both restorations.

@vijaynaik7739 Жыл бұрын

What a competition, both are as good as other, superb sir. What a restoration beauty.

@rogerpatrongonzalez5800 Жыл бұрын

I enjoyed both videos a lot👍👏👍👏👍👏👍👏👍👏

@zorrosoberon Жыл бұрын

The winner of this wonderful contest IS US; THE VIEWERS, HOLY S**T YOU'RE EXCEPTIONALLY GOOD!!! Thanks for sharing blessings.

@petewest3122 Жыл бұрын

Outstanding restoration, presented in a well edited video, and you even included an apt Bob Ross quote. Mr Patina has his work cut out for him....

@NTRprojects Жыл бұрын

I think you are the first one who noticed the happy quote

@thewillofme Жыл бұрын

Mr. Beer wins Congratz. But they both did a very Good Job.

@hitmydaytoday Жыл бұрын

One more Tool saved. I like this renovation but i LOVE the woodworking. The idea using the scrapwood is just awsome. And of course seeing the Festo-Saw in Action was a nice plus.

@BLKMGK4 Жыл бұрын

Ha, I was about to comment on the gauge of the metal but sure enough you snipped the thicker one at the end - well played! That woodwork is amazing and the restoration is beautiful, thanks for sharing!

@vinceianni4026 Жыл бұрын

Hello Mister Patina beautiful restoration beautifully restored well done

@garymucher4082 Жыл бұрын

Very nicely done. Amazing how precise one of those metal cutters can cut things. Once you use one, you can't figure out how you did without one all the years. Thumbs Up for sure...

@foxwhiskey 5 ай бұрын

Watched again. Same result. Can't be done better ! Respect !😊

@saskia4139 Жыл бұрын

This is an overwhelming Renovation! The device looks like new - with the wooden base maybe even better - and works perfectly. You have a lot of attention to detail. A wonderful video! Thank you!