5:24 Headlight Install 11:05 Turn Signal Install 21:23 Relay Install
@smokeystarr10 ай бұрын
Does this headlight set up work if you want to keep your front blinkers?
@wadelanagan10 ай бұрын
I would have never been able to get through the install without this video. Thank you for your help brother!
@arolls223 жыл бұрын
I installed this headlight on mine using you “schematic”. It worked perfectly! Thanks and keep em coming. Your bike looks badass now!
@XSRDetroit3 жыл бұрын
Thank you! I'm actually planning a follow up with better instructions but I'm glad to help!
@jeffreyroth75174 жыл бұрын
Nice work, headlight really looks sharp!
@XSRDetroit4 жыл бұрын
Thank you! I'm happy with it overall
@matttriestodothings4 жыл бұрын
"It kinda took me a month to put a headlight and some turn signals on". Gang gang, I empathize. Great video.
@XSRDetroit4 жыл бұрын
thanks dude! Yeah adding filming and editing tends to stretch projects out. dig the channel man.
@matttriestodothings4 жыл бұрын
@@XSRDetroit For sure--what you think only take 5 minutes, often takes 50 when trying to film it. And you've actually got some polish on your videos--I'm just banging a hammer most of the time, haha. Cheers.
@blueprintgville4 жыл бұрын
Thanks for posting! Ive seen you on the FB page. Keep em' coming.
@XSRDetroit4 жыл бұрын
Appreciate the support! Got some fun stuff planned
@csiautodetail4 жыл бұрын
Thank you for this video, I got your channel from someone on the FB page glad I did. I will do the same mods soon, if I have a question hope you don't mind me to ask.
@XSRDetroit4 жыл бұрын
For sure, ask and if I can help I will
@jerryx20002 жыл бұрын
is the light still working without moisture inside?
@XSRDetroit2 жыл бұрын
The light is still working fine, on chilly mornings I sometimes get a bit of moisture but it's rare.
@Kasperblk4 жыл бұрын
I have this same headlight. I plan on cutting off the stock turn signal brackets.
@XSRDetroit4 жыл бұрын
I chickened out of cutting them. I wish I had but they're already out for powdercoating.
@mongosaqqara10 ай бұрын
Great video...I got the 5 3/4 adaptive...$550.00...The headlights are not bright enough and I think bike will look much better with 7in bucket...are you happy with yours? would you buy again? Is there one without turn signals?
@XSRDetroit10 ай бұрын
For a $70 headlight I'm very happy. It's been a solid headlight. It does have the turn signals. I'd buy it again
@subytek4 жыл бұрын
Thanks for posting this. Were you able to tuck all the factory wiring in the bucket behind the led?
@XSRDetroit4 жыл бұрын
Yep! It's a tight fit but it will all tuck
@caponira Жыл бұрын
Hi, have this headlight for my sr 250 and apart from the h4 plug for headlight I only have 2 small spade terminals coming from new headlight not 3. Seller trying to say after checking with engineers that yellow for dlr lights and red for left and right indicator. That can't be correct.
@XSRDetroit Жыл бұрын
Yeah if I had to guess I'm assuming one spade is ground, one is drls. Probably similar headlight but not the same.
@niltonrbatista Жыл бұрын
I’ve followed the exact front instructions, but when I install a led in the back my front turn signals have stopped flashing.
@XSRDetroit Жыл бұрын
Did you install a relay for the LEDs?
@timm23783 жыл бұрын
For the headlight how did you ground the signal lights ? Did you wire them into the plug adapter on the bike ?
@XSRDetroit3 жыл бұрын
I cover this around 9:00
@heavensace3 жыл бұрын
I didn't understand what you did either, you put the ground wire into the signal wire?
@swissDragonrider3 жыл бұрын
I'm running pretty much the same headlight and I think it really looks nice. What I have found is that it's aiming slightly to high with the stock mounts and the new housing. Have you had similar experiences and if so, how did you fix it?
@1700beny3 жыл бұрын
Same question here, how did you manage the aim of the headlight with stock brackets?
@XSR_RUGGER3 жыл бұрын
I imagine you could just loosen the housing on the mounting bracket and tilt the housing down to the desired height then tighten it all back up.
@jonbe93 жыл бұрын
nice work on the LED headlight (very cost effective too!!!!) My only question is LED headlight performance in high and low beam - much better visiblity than stock or just as good!?! thanks in advance
@XSRDetroit3 жыл бұрын
It's definitely better, the stock XSR bulb is pretty bad
@DylanClemons4 жыл бұрын
That bike is amazing I need
@XSRDetroit4 жыл бұрын
Legit love it dude. Fantastic bike
@TheJakers20 Жыл бұрын
Did the windscreen not fit on there anymore after installing the new headlight?
@XSRDetroit Жыл бұрын
No, the new headlight was too big to make it work
@MarwanAlsamrae3 жыл бұрын
Hey man cool content.. I bought the same headlight for my xsr but my bike came with no front turn signals!! The guy that I bought it from was riding without turn signals 🤷🏻♂️🤷🏻♂️ I was wondering if you can shot me a link to the adapters that you’re talking about?? Thank you 🙏🏼
@XSRDetroit3 жыл бұрын
Check out babbits, look at the turn signal wiring harness and your should be able to find the stock turn signal connectors. If you run into trouble message me on ig @xsrdetroit it'll be easier to help you on there
@jamesgalvis14043 жыл бұрын
Sorry when you said to convine the black cables, do you attached them to the turning cable. Or just put those black cables together by themselves and that’s it, I have been trying to get this installed but now the LDR light doesn’t work even on the tail light, my horn and brake light are not working.. I already check the fuses but the problem keeps on going, any suggestions thank you
@XSRDetroit3 жыл бұрын
I just combined the two grounds of the turn signals together
@robertonogueda22344 жыл бұрын
Can this or any other after market headlight be fitted to the OEM bucket(headlight housing)? Thanks and great video.
@XSRDetroit4 жыл бұрын
Iirc the motodemic kit fits in the stock bucket.
@joeymarquez96353 жыл бұрын
Why is it my xsr 900 signal connectors doesnt have that blue wire to connect to drl. Can i connect it to the parklight wires?
@XSRDetroit3 жыл бұрын
Is it a euro bike?
@KrapGrimChr14 жыл бұрын
Looks great! Did you have to end up modifying the stock brackets to fit the 7" bucket?
@XSRDetroit4 жыл бұрын
Nope it was a direct fit
@djroan112 жыл бұрын
Hey! When I connect the front turn signals i and turn on, the signal lights flash fast, amber on one side and white on the other side. Any suggestions? Ps the hazard lights work properly
@XSRDetroit2 жыл бұрын
sounds like wiring got crossed somewhere. The fast flashing is probably due to the stock relay, i had the same thing before I swapped to the TST relay. The signal lights should be white and only change when the turn signals activate. The hazard lights thing is weird, definitely check the turn signal wiring again.
@SheldonHolderMusic3 жыл бұрын
Can you use the OEM bucket with the headlight? Or is that just not possible?
@XSRDetroit3 жыл бұрын
No, unfortunately the projector is too big. There are some cheaper projectors that do fit in the headlight housing, but I'm not sure who makes them
@smookinz47473 жыл бұрын
Does it fit (clear) with the dart classic fly screen ? I have the screen installed right now
@XSRDetroit3 жыл бұрын
I don't think it will, the sktyants is larger than the stock headlight housing.
@JChaseProductionsCo3 жыл бұрын
So I'm still a bit confused. My driving lights flash along with my turn signals, and I believe thats due to the relay which I have ordered. However, I'm not sure exactly how to hook up the driving light connection. Correct me if I'm wrong but you said to tap into each turn signal wire and connect them to a spade that then connects to the brown wire? My turn signals only have two wires, and ones obviously a ground.
@XSRDetroit3 жыл бұрын
Is this a Euro bike?
@JChaseProductionsCo3 жыл бұрын
@@XSRDetroit nah USA. 07 Ninja 250
@XSRDetroit3 жыл бұрын
You will have to tap into your wiring harness and run another line for the DRLs. Check a wiring harness diagram to see where you need to tap in
@1700beny3 жыл бұрын
The aim of your headlight is not slightly too high with OEM mounts?
@XSRDetroit3 жыл бұрын
It is a bit high, but I don't ride at night too often
@precludeneco4 жыл бұрын
Great video. The headlight bemm/aim seems a little bit too high?
@XSRDetroit4 жыл бұрын
Yeah it definitely was. I ended up adjusting it once I started riding the bike again
@precludeneco4 жыл бұрын
@@XSRDetroit did you have to modify the bucket to be able to lower the beam? I have the same setup and the aim is way to high.
@cfvgd4 жыл бұрын
All this work and you dont even show how it looks like finished? XD Thx for the video tho
@XSRDetroit4 жыл бұрын
You can see the completed bike in episode 5. Thanks for check the video out!
@ridemfast76253 жыл бұрын
Nice vid. Is the headlamp still working? Does it ever fog up or get moisture inside?
@XSRDetroit3 жыл бұрын
Yep! Haven't had any issues so far
@oakraiders55968 ай бұрын
@@XSRDetroitI don’t understand the ground wire portion, what are you supposed to do with the ground wires( black wires)?
@alexamado85844 жыл бұрын
Hey. Great job! I'm trying to do the same but not so lucky. Can you help me? My stock turn signals have only 2 wires and the new headlight just 1, when i conect it the turn signals dont blink, they just stay on. Please help. Thanks
@XSRDetroit4 жыл бұрын
Is this a European bike?
@alexamado85844 жыл бұрын
Yes
@XSRDetroit4 жыл бұрын
From what I've read online the euro bikes have parklights instead of day running lights like the American bikes. You should be able to tap into the park light to get the drls to work
@XSRDetroit4 жыл бұрын
The headlight should have two connectors for turn signals, one for each side
@lexacost3 жыл бұрын
Hey man i did everything you did but the headlight t/s stay solid when activated, you know what the issue could be?
@XSRDetroit3 жыл бұрын
Are you using the stock relay?
@lexacost3 жыл бұрын
@@XSRDetroit no i have installed a flasher relay for the rear lights
@XSRDetroit3 жыл бұрын
Try the stock relay and see what happens. Is it a brake light flasher
@lexacost3 жыл бұрын
@@XSRDetroit i figured it out, i had to add load resistors bridging the headlight turn signal positive to the ground, took me all day 😅
@XSRDetroit3 жыл бұрын
Just out of curiosity, is this a euro bike?
@quadflopper10124 жыл бұрын
all that bs and it doesn't even show the headlights beam patterns to know if it is even worth installing, what a waste....
@XSRDetroit4 жыл бұрын
I have a follow up review video coming soon that will cover this and more.
@marcducati2 жыл бұрын
People should avoid Amazon cheap led headlights. They are all crap. Go with a more expensive reputable brand that has done research. No Chinese lights are DOT or euro Legal even if they indicate it.
@XSRDetroit2 жыл бұрын
You definitely get what you pay for. I'm surprised mine has held up as well as it has