Рет қаралды 4,887
Hello and welcome to my latest tutorial.
To make this pendant you will need -
• 0.8mm wire (20g) 4 x 10" (25.5cm)
• 0.315mm wire (28g) approx 200cm
• Crescent moon shaped cabochon, 30mm (if measured as a circle) approx.
• Jump ring 8mm (outside measurement)
I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)
How I oxidize my bare copper - • Oxidising copper jewel...
Facebook - / kellyjoneswirejewellery
IG jones_kel
My Etsy store - (where you can see my tutorials and jewellery for sale)
www.kellyjones...
Thanks for watching x