Wire Wrapped Cabochon Ring Tutorial

Рет қаралды 138,404

OxanaCrafts

8 жыл бұрын

How to oxidize copper: • How to Oxidize Bare Co...

Пікірлер: 152

@bethanylouive9402 3 жыл бұрын

Beautiful! Thank you for helping me figure out how to wire wrap a cabochon ring! I was scratching my head, trying to figure it out without crossing over the front of my stone how to wire wrap a beautiful silver sheen obsidian stone. I love how in the moment you were, too, & pointed out the hole & had a ready variation/fix.

@KristyProv90 8 жыл бұрын

I am new to wire wrapping and I have found rings seem to be my knack, thank you for being specific and having such an upclose video of your work! it makes learning alot easier! thank you so much.

@OxanaCrafts 8 жыл бұрын

Glad to help, thank you!

@karrae7085 6 жыл бұрын

The kids in the background makes this video all the more better. Shows that you are real and down to earth. Beautiful ring!!!!

@fishingforgolfballs 8 жыл бұрын

Thank you for the wonderful tutorials. This ring is lovely.

@melissawood5018 8 жыл бұрын

Yay a wire woven cabochon ring...thank you so much for this video. Rings are hardest for me and I'm sure others. The simple ones are fine but I want to learn more complicated ones such as this. You're the best! Thanks, Melissa

@OxanaCrafts 8 жыл бұрын

thank you! glad you liked it :)

@rebvan1 8 жыл бұрын

This is the prettiest wire wrapped ring that I've seen so far. The band far exceeds that which others have demonstrated.

@OxanaCrafts 8 жыл бұрын

Thank you so much!

@twistedimaginings 7 жыл бұрын

I am in awe of your talent! I'm going to have to get my wires out again! Thank you so much for sharing with the world xxx

@OxanaCrafts 7 жыл бұрын

Thank you so much! :)

@starlady4573 7 жыл бұрын

Another stunning design and creative process!

@williamwatson6241 3 жыл бұрын

Really appreciate your sharing. This will be my 1st little try at weaving. Love your videos so thank you!!!

@benambadshahkpk9572 3 жыл бұрын

Thank you so much, it was really tricky work, but you done so easly and perfict, your talking style is so nice, i watch full vedio till end, thank you

@amandadiaz5215 8 жыл бұрын

I have been searching for a tutorial like this for over a year! You are the best! Thank you!

@OxanaCrafts 8 жыл бұрын

Thank you!

@christymccullough7306 7 жыл бұрын

i just found you and I'm so glad!! What a great tutorial. thanks so much, you have a new subscriber here

@marilynbees56 7 жыл бұрын

Your tutorials are amazing

@carmenhartman8309 8 жыл бұрын

Love this tutorial I have lots of tiny cabachons that I can use for rings now!!! Thanks so much!

@OxanaCrafts 8 жыл бұрын

Thank you!

@universanima 6 жыл бұрын

You are amazing and your tutorials are amazing! Thanks you 🐰

@RaeGrout 7 жыл бұрын

Love your work and thank you for all you do 💖

@mepl617 8 жыл бұрын

Oxana thank you so much for these continuously awesome tutorial videos. I love every time you post a new video!

@OxanaCrafts 8 жыл бұрын

Thank you :)

@pamsimerly7547 8 жыл бұрын

Nice! Simply done and simply gorgeous!

@OxanaCrafts 8 жыл бұрын

Thank you!

@licksnkicks1166 7 жыл бұрын

This is just so awesome and it's actually not too hard. Thanks so much! I love your voice by the way. Very relaxing and soothing. Just what I need to hear after a hard days work. I have subbed you because you rock!

@OxanaCrafts 7 жыл бұрын

Thank you very much! :)

@cavallreynosa1429 5 жыл бұрын

Me encantó su diseño esta increíble gracias ....

@sakthornton5626 6 жыл бұрын

You make it look so easy.

@erbekaydesigns7888 7 жыл бұрын

great tutorial, Oxana! Can't wait to try it out =)

@Elle-zd5ij 8 жыл бұрын

I love your channel, great tutorials!

@OxanaCrafts 8 жыл бұрын

Thank you!

@carolinaalvarez4989 4 жыл бұрын

The best tutorials , beatifull job

@chiefstacker6343 3 жыл бұрын

Fantastic lesson thanks Oxana

@sutela2060 3 жыл бұрын

Beautiful ring😍❤️ thanks for the good video

@Mv-nx8es 2 жыл бұрын

Ciaooooo ….. molto bello , elegante e pulito . Spiegazioni per l’ esecuzione precise . Complimenti 🤗

@LIFELOVER715 2 жыл бұрын

You are a master. Beautiful work.

@OxanaCrafts 2 жыл бұрын

Thank you very much!

@annh3599 8 жыл бұрын

Thanks Oxana! Nice video! appreciate you sharing!

@OxanaCrafts 8 жыл бұрын

Thank you!

@gypsyrhodescovers 8 жыл бұрын

Love this tutorial! Thank you!

@OxanaCrafts 8 жыл бұрын

Thank you! :)

@mariegailgladue6759 8 жыл бұрын

thank you for your demonstration of the ring..

@OxanaCrafts 8 жыл бұрын

you are welcome!

@karenjb82 4 жыл бұрын

That's so pretty!

@pamelagentry7477 7 жыл бұрын

Ditto on the comment below! Your stuff is BREATHTAKING!!! Def on my way to craft store to get oodles of wire!!!!! God bless!

@OxanaCrafts 7 жыл бұрын

Thank you!

@kristi8484 8 жыл бұрын

This awesome Oxana!! Thank you sooo much!!

@OxanaCrafts 8 жыл бұрын

you are very welcome!

@godesskali9095 7 жыл бұрын

Beautiful thank you.

@chapissosa2532 6 жыл бұрын

Wow! Increíble. El alambre que usas es cobre o imantado? Gracias saludos desde México

@gailachambers5102 8 жыл бұрын

Great tutorial! Thanks!

@OxanaCrafts 8 жыл бұрын

thank you!

@ravisharma345 5 жыл бұрын

Very nice wonderful design lovely design nice thanks to show

@nancylee6590 7 жыл бұрын

I love you so much for this. I can't afford silversmith tools yet.

@OxanaCrafts 7 жыл бұрын

Thank you!

@VM11238 8 жыл бұрын

Osama love your tutorial 😁 I've had a few problems trying to make this style ring before, your way seems a bit easier,gonna give it a try 😁 might just text tho , maybe just make an oval frame,or shape a design frame and wire it to the underside for a cleaner look . Just a suggestion☺ That is for the tute!

@OxanaCrafts 8 жыл бұрын

Thank you! Yes, you can definitely do it that way with the frame, I did it that way in my tree of life ring video. Might be slightly more challenging.

@cherylrodriguez8579 Жыл бұрын

Beautiful

@fishingforgolfballs 8 жыл бұрын

Thank you Oxana.

@OxanaCrafts 8 жыл бұрын

you are very welcome!

@otako_anime_11 4 жыл бұрын

دستت درد نکنه

@Dann31bbb 8 жыл бұрын

beautiful ! Thank's so much !

@OxanaCrafts 8 жыл бұрын

thank you!

@MegaGANOEXCEL 5 жыл бұрын

Brilliant 💕

@nunawatson4307 5 жыл бұрын

Love love love 💗

@ronieGirl327 7 жыл бұрын

can you oxidize things if it has a polymer clay piece/cabochon in it?

@debbiegoble9836 4 жыл бұрын

Awesome awesome 👍👍

@rebecavaldes8126 7 жыл бұрын

me encanta contigo voy aprender

@ma1900bi1900 7 жыл бұрын

thank you

@abby_normal_x 8 жыл бұрын

Do you have any tutorials for rings with faceted gemstones?

@andreasebok3977 7 жыл бұрын

Thank You!

@OxanaCrafts 7 жыл бұрын

you are very welcome

@umashankar9302 6 жыл бұрын

what a effort what a excellent wire work

@lauramya98 7 жыл бұрын

Hi! What material is it? Aluminum? And what are the measures? Thanks!

@mariadimaio35 8 жыл бұрын

bravissima!

@OxanaCrafts 8 жыл бұрын

thank you!

@jaymewitcher1183 8 жыл бұрын

you are amazing.... love the ring videos! do you have plans for any earrings? thank you for your hard work, it helps us newbys out!

@OxanaCrafts 8 жыл бұрын

thank you! I do have one video on earrings, but I plan to make more :)

@Mizzie888 7 жыл бұрын

pretty kool

@patriciaconlon6175 8 жыл бұрын

Thank you!!!!

@OxanaCrafts 8 жыл бұрын

you are very welcome!

@jibriltv6389 6 жыл бұрын

I love The owner of that hands.

@deeron1554 4 жыл бұрын

I tried making this ring but it proveed to be very challenging. Is it because I used parawire instead of half round wire - it is very expensive. Can you suggest a cheaper alternative wire, thanks. PS: Love your work, I have made a few of your pendants, only this ring was challenging.

@licksnkicks1166 7 жыл бұрын

I know I am new to your channel but do you think you could do an ornate cross tutorial one day? Please if you could and thank you if and when you do one.

@sheripreston3620 8 жыл бұрын

ok thanks 😊

@iseejewelz3874 8 жыл бұрын

suuuuuuuper pretty

@OxanaCrafts 8 жыл бұрын

Thank you :)

@foolishfool187 7 жыл бұрын

Do you have any videos making a thicker ring?? I'd love to make a ring that had a wider wire base below the gem.

@OxanaCrafts 7 жыл бұрын

I don't think that I do, I have the tree one, but I don't think that's what you are looking for

@bryanl9769 5 жыл бұрын

Out of curiosity where do you get your wire from?

@chelcc.7900 7 жыл бұрын

Do you sell any rings like this? This is beautiful I would love to check out more of your work do you have a website?

@OxanaCrafts 7 жыл бұрын

I do sell on facebook(OxanaCrafts) and instagram(oxana124), but I do not have any rings like this at the moment.

@ladyzeplin 8 жыл бұрын

BRAVO!!!! Beeautiful!!! ;-)

@OxanaCrafts 8 жыл бұрын

Thank you!

@LaTrica01 7 жыл бұрын

does it have to be dead soft and are both wires dead soft or just the twenty gauge

@OxanaCrafts 7 жыл бұрын

yes, dead soft for both. Half hard wire is very hard to bend and will not work for this.

@iseejewelz3874 8 жыл бұрын

guuuurl imma subscribe

@OxanaCrafts 8 жыл бұрын

thank you!

@sheripreston3620 8 жыл бұрын

sorry, 1 more question :) The wire you use for weaving, do you cut and let dangle or do you leave it on a spool?

@OxanaCrafts 8 жыл бұрын

No problem, gland to help. I leave it on the spool

@rioreason 8 жыл бұрын

I can't get enough of your videos, I love your stuff! Could you do a ring with a small crystal point? I have a little citrine point that I'm struggling to frame right in a ring without covering too much of the front. Also, do you have an Etsy shop?

@OxanaCrafts 8 жыл бұрын

You could use this tutorial to wrap the little crystal, just trap it with the frame in the same way I trapped the little cabochon. I don't have etsy, but I sell via Facebook.

@rioreason 8 жыл бұрын

Oh, of course. I guess I'll just try two wires instead of three, to try and show off the point more. Thanks, the best solution always seems the easiest - I guess I just wasn't seeing the obvious. Will definitely buy something from you one day. Do you take commissions, like if I mailed you something to set?

@OxanaCrafts 8 жыл бұрын

Sure, I can do commissions. And if I figure out a better way to do a crustal point ring I will be sure to make a tutorial.

@rioreason 8 жыл бұрын

I imagine a video like that would do well! The crystal points are trending so hard right now. I've gotten in over my head, I have more than I could make jewelry with in a year or more!

@twistedimaginings 7 жыл бұрын

Rio Reason ditto! I think I have enough cabochons to last until I'm a hundred! Lol!

@romilsonsoares1199 Жыл бұрын

Top

@hexagramjava7436 4 жыл бұрын

Hey, is that so the copper turns brown, what should I do? Thanks

@OxanaCrafts 4 жыл бұрын

I oxidize (turn copper dark) using liver of sulfur, I have a video on how I do it

@fishingforgolfballs 8 жыл бұрын

What do you do to prevent the copper rings from turning fingers green?

@OxanaCrafts 8 жыл бұрын

I have never had that happen, but I do not wear rings for very long periods of time, nor do I wear them every day.

@claratarver3138 8 жыл бұрын

Oxana, I love all your tutorials. This ring is beautiful. I do have a problem seeing your moves when you are showing some of your wraps. I am a beginner and do have a problem following you when you wrap the smaller wire around larger one. Could you go slower please. Thank you so much for your tutorials.

@OxanaCrafts 8 жыл бұрын

Thank you! I have some videos on just the weaving portion, so you can see that part in a bit more detail and slower. Here is one that also uses 3 base wires, it is not exactly same as the one in the video, but you could definitely do this type of weave, especially for that portion that goes around the ring: kzfaq.info/get/bejne/fNl1f5uSlp6vZ2w.html and for the other portion(the band) here is another weave that would work well: kzfaq.info/get/bejne/lbmqpaqH0trbaZ8.html

@slicksweet1 4 жыл бұрын

What size is the cabochon please?

@laisha3546 4 жыл бұрын

I have a question, I see that everyone always says Oxidize the final product, do we have to? If so why?! Thank yoh

@OxanaCrafts 4 жыл бұрын

no you don't have to, it is just for looks

@kaybee11982 8 жыл бұрын

does the oxidation rub off my skin?

@OxanaCrafts 8 жыл бұрын

after I oxidize, I polish it up, so that's why you see the lighter copper highlights. And because the excess tarnish has been removed I do not find that it gets on the skin.

@marnicarroll2506 7 жыл бұрын

Does the 20g wire need to be dead soft? I am having trouble finding this wire.

@OxanaCrafts 7 жыл бұрын

usually most wire at craft stores is dead soft, the other type is half hard. I personally have not used half hard so I am not sure how it would work

@unboundbytiffany 7 жыл бұрын

Marni Carroll , I used an 18 gauge medium hard for the base wires and 28 gauge dead soft for the wrapping wire and it seems to work nicely so far (almost done with it just making the stone to put in) it was a little harder to bend perfectly round and into shape but I do think that is beneficial in the long run as it will harder for a customer to accidently misshape or ruin, so much less likely you'll have someone unhappy down the line. Also, I do think you need a soft wire for atleast the wrapping wire as it would be very difficult to get those perfect tiny loops all the same and woven tightly to the base wires, atleast without alot of time and effort. In fact, I am not sure if you can buy a 26 or 28 ga. wire in anything but soft as its so thin I would think it'd be soft no matter what, haha. Anyways sorry longggg response but to summarize I actually prefer my base wires (16ga. to 24ga.) to be a harder wire, usually a medium temper like the brand "Beadalon" in German style silver plated round. Then I wrap them with a dead soft wire like the brand "Artistic Wire" silver plated 26ga. or 28ga. However note the 28ga. tends to break/snap while wrapping VERY easily. Quite annoying. anyways hope that helps! I'm no expert, just a small business entrepreneur and I LOVE Oksana's tutorials and ideas/designs it's inspired alot of new jewelry ideas of my own! Thank you, keep the wire wrapping coming please:)

@VM11238 8 жыл бұрын

sorry the tablet switched what I said."Might text tho " should have read as "Might I suggest tho" oops!

@cricketannhill6569 7 жыл бұрын

Hi ! I want to wire wrap SO badly and practice all the time, but have a difficult time as I have MS and my hands like to do their OWN thing,, haha ! Do you have ANY tutorials that are beautiful, but not quite so hard that us beginners can do and feel a sense of accomplishment ? ? Thank you so much ! God bless you....Cricket Ann Hill

@OxanaCrafts 7 жыл бұрын

I have a few videos labeled as begginer that might be easiest to start with. This one is nice and easy: kzfaq.info/get/bejne/fsCPitxkrruomGQ.html

@wcdeich4 6 жыл бұрын

do you always use dead soft wire?

@OxanaCrafts 6 жыл бұрын

wcdeich4 yes

@jazzy_jz 4 жыл бұрын

Is this ring adjustable?

@OxanaCrafts 4 жыл бұрын

no, it is not

@cherylrodriguez8579 Жыл бұрын

Can you do a video on how to oxidize it

@OxanaCrafts Жыл бұрын

Here it is: kzfaq.info/get/bejne/fbKRpadhtpPYpKs.html

@cherylrodriguez8579 Жыл бұрын

@@OxanaCrafts ty :)

@unboundbytiffany 7 жыл бұрын

I am extremely confused now, I followed the steps thought I had it, but as I rewatch the clip between finishing the second weave and closing up the circle the circle on weaving for the cabachon changed sides and direction. I have no idea how you got there. now mine looks like the first moment you start weaving (with the empty spaces for 28gauge wire to fit through) on the inner side of circle, and then when you "come back after finishing weaving", it's on the outside and circle is in different direction and reversed. Have no idea how to properly get there... help please!

@hhhhhhhhh61 7 жыл бұрын

Tiffany Danilewicz hi there tiffany. I see your problem. She must have decided to change the direction of the frame for the cab so the woven points were to the outside of the frame and didn't mention it. If you are careful you might be able to salvage your ring by gently straightening it and then bending it the other way. or just go with it! It's all part of the learning process... it will be a bit harder to get your weft wire in from the underside to secure the cab this way though which is probably why she changed it. sorry you got stuck following so carefully. I hope this helps.

@unboundbytiffany 7 жыл бұрын

tikuli tikuli Thank you so much for the reply! Yes, I straightened it again and retwisted it to match the second version, as the first was too difficult to close and finish as well as the stone couldn't be centered on the ring vertically either it only sat above it so had to fix it. It seems to be ok just was extremely difficult I mean EXTREMELY as the wires were wayyyyyy to tight to be rounded the opposite direction but it seems to be ok now. I'll try to post the finished ring once I'm done making the stone :) Thank you again!

@twistedpixie6972 8 жыл бұрын

Will this work with thin cabochons?

@OxanaCrafts 8 жыл бұрын

yes it will!

@twistedpixie6972 8 жыл бұрын

+OxanaCrafts thank you so much!

@sheripreston3620 8 жыл бұрын

is all the wire you use dead soft?

@OxanaCrafts 8 жыл бұрын

yes it is

@sheripreston3620 8 жыл бұрын

Ok ty 😊

@sharonellis8871 8 жыл бұрын

Oxana when you are showing how to bend the wire around the cab it would be helpful if you showed the way they go and stop for a second it is too fast I am trying to follow and just can't keep up. Have stopped a couple of times and again too fast moving ring around constantly when showing so can't make the bend correctly . I guess it is just me bc everyone else says good. but I really can't see when ring in constant motion

@OxanaCrafts 8 жыл бұрын

sorry, I will try to slow down next time. I figured that part would be different for everyone since you would have a different size and shape of stone, you just have to bend the wires around it forming a frame.

@jazzy_jz 4 жыл бұрын

Do you live in the US?

@OxanaCrafts 4 жыл бұрын

I live in Australia

@jazzy_jz 4 жыл бұрын

@@OxanaCrafts Oh, cool!

@debbiegoble9836 5 жыл бұрын

I tried that and it was a bunch of mess. It was me.