Wirelock Resin for socketing wire rope terminations.This wire rope assemblies are 100% effecient when used with steel wire rope,galvanized wire rope.
vattutaubien.vn/product/wirel...
Pass the wire rope through the end hole of roller socket and measure the rope ends to be socketed.The rope end should be seized at the sufficient length so that the ends of the unlaid wires( form the strands)will be at the top of the socket basket.
The wire rope is secured in a vice directly below the seizing to allow the strands to be unlaid to the seizing.
All of the liquid resin should be placed in the mixing container and then all of the power added to it before mixing.Always mix all of the resin with all of the powder.
Upon mixing,the resin will turn to a greenish turquoise color,if the mix remains a pale straw yellow color,do not use the kit
One the resin is mixed,it should be pureed immediately into the socket to ensure good penetration.
The rope can bi put in service or proof loaded one hour after the material in the socket has gelled.Whenever possible,the assembly should be proof loaded.
--------------------------------
Contact Us :
Website : vattutaubien.vn/
Email : vattutaubien@vttb.com.vn
marineconsultancy@vttb.com.vn
Fanpage : / vattutaubien.vn
KZfaq : / @vattutaubienvn4534
Hotline : 0902 948 498