No video
Wiring An ALH ECU To Run An AHU TDI Engine
Рет қаралды 2,585
Күн бұрынThe AHU TDI is still a very good engine for many swaps like the Suzuki Samurai and other tighter engine bays, but the ECU is very outdated and hard to work on, making performance changes and turbo options limited for these setups. Because the wiring is very similar to the newer ALH setup, converting the sensors to run off an ALH ECU can be very beneficial for upgrades and flash tuning capabilities. I was able to covert the wiring using mostly existing wire from both harnesses and keep the cost of the upgrade relatively inexpensive, in fact probably cheaper than even trying to get a performance tune for the original AHU ECU.
@alexmatthews3117 11 ай бұрын
I've been searching forums for exactly this for my 98 ahu. 300+ for chip tuning is crazy and I think I'll go this route for future tuning options
@TDISwaps 11 ай бұрын
Ya it's the way to go! Let me know if you need any immobilizer or tuning help for the ALH ECU I can get stuff done pretty cheap.
@aygwm 3 ай бұрын
Burpod on the TDIClub forums still does chip tunes. Honestly his tunes and service are amazing. Changing the chips every time we tweak the tune though, sucks.
@TDISwaps 3 ай бұрын
Ya I do know a couple guys, but it's getting pretty scarce, just makes more sense to switch if you are already doing wiring
@lazarmrsic5623 8 сағат бұрын
How much does he charge for a tune? What can he all do for them? Really want to chip my tdi corrado but do not wanna spend the 350 Kerma is asking
@nickaldana0 9 ай бұрын
legend
@TDISwaps 9 ай бұрын
Ha ha thanks man
@nickaldana0 9 ай бұрын
@@TDISwaps that's exactly how I'd want to tune my B4 Passat!
@TDISwaps 9 ай бұрын
@nickaldana0 yup it's the way to go these days, and make custom dashes so easy now it's not even worth messing with making everything factory.
@robinlaker 7 ай бұрын
This is really useful! I’m in the process of putting a 1Z tdi in a mk1 Caddy. I’m in the UK, I don’t know if you got the 1Z over there but it’s essentially the same setup as AHU, the first incarnation. I was looking at chip tuning, but as you said, it’s pretty much obsolete now. I’m going to get the standard ecu and loom installed so I have a working vehicle and then look to go down the ALH management route once I’ve got all the parts together 👍🏻
@TDISwaps 7 ай бұрын
Glad to help! Yes the 1Z would work the same way!
@robinlaker 7 ай бұрын
@@TDISwaps do you have the part number for the ecu to hand? I don’t know if there’s a difference between European and U.S part numbers but it would give me something to go with initially. I have the n/a (SDI) version of the ALH in another vehicle so I’ve got the ecu, loom etc. Whether or not it’s possible to add in the vnt wiring to that and build a stand alone loom I’m not sure. But it’s worth investigating before I buy anything I guess.
@TDISwaps 7 ай бұрын
@robinlaker 038906012 is the ECU you want, it needs to say diesel and not say +P and it will work, glow plugs may be more specific if you want them to be automatic, I always do push button.
@robinlaker 7 ай бұрын
@@TDISwaps awesome! Thanks so much 👍🏻
@TDISwaps 7 ай бұрын
@robinlaker no problem!
@saleemcarr9501 11 ай бұрын
No use for me but I put up a update video on my mtdi build, the trick with tapping the injectors during install worked well. I haven't dealt with my hole in the turbo issue yet, I'm poor right now so I'm attempting to patch the hole..... and hopefully that will work untill the spring , I actually daily that trash heap 😂
@TDISwaps 11 ай бұрын
Hey if it runs, drive it!!!
@mikearai444 10 ай бұрын
I was wondering if you could help me I have a 2012 2.0 liter tdi I want to put it in my gmc Sonoma any help would be awesome
@TDISwaps 10 ай бұрын
For sure man, they are very similar as far as the swap goes, just different sensors, hoses in different places and things like that. Do you have specific questions? You can PM my Facebook also. facebook.com/profile.php?id=100014261163897&mibextid=ZbWKwL
@sailingblacklotus 11 ай бұрын
Hey awesome video!!! Im just mapping my plan and timelines in regards to parts and work to get my 2005 xterra 6sp offroad (locking rear diff) vq40 to alh tdi conversion. I was hoping to contact you about it if you dont mind. Whats the best way to contact you? P.s. Im also wanting to see in the future for the viability to convert the tdi engine for marine inboard engine application.
@TDISwaps 11 ай бұрын
An Inboard TDI would be sweet! I've only seen 1 or 2 of those. you can find me on Facebook. facebook.com/profile.php?id=100014261163897
@Jesus-hx5vg 11 ай бұрын
Very interesting considering I have an AHU and ALH engine 😂 my AHU OBD port doesn’t have power
@TDISwaps 11 ай бұрын
Ya it would be a lot of work in the car, not sure you could get everything to work, but still pretty cool they interchange!
@chrispurdy1647 9 ай бұрын
Is the vacuum line that normally goes to the AHU ECU not needed then if you’re still running a wastegate turbo and the AHU N75?
@TDISwaps 9 ай бұрын
You will need custom tuning to control the AHU ECU like it was originally, most people either close the wastegate completely or switch to a different turbo from what I've seen. The advantage is flash tuning is readily available and can be done right at home.
@chrispurdy1647 9 ай бұрын
Unfortunately I have to run a non VNT turbo for space constraints and definitely see the benefit of the flash tune. I wired my AHU stand-alone already and was thinking of going with an ALH ECU for ease of tuning. A bit of back tracking and extra work but easier in the end. I just wasn’t sure about the vacuum input and how it factors into the system.
@TDISwaps 9 ай бұрын
@chrispurdy1647 it's not needed at all with the ALH ECU
@chrispurdy1647 9 ай бұрын
@tdiswaps Thank you for your guidance!
@TDISwaps 9 ай бұрын
@chrispurdy1647 no problem!
I Do Cars
Рет қаралды 275 М.
TDI Swaps
Рет қаралды 2,9 М.