Wish i knew this before spending $$$/Leaking Fuel Injection cleaning/HOW TO clean GDI injections

Рет қаралды 3,833,222

2 жыл бұрын

Ultrasonic i used: s.click.aliexpress.com/e/_AFalG9
Injector Tester: s.click.aliexpress.com/e/_AMNAR7
100pcs Fuel Injector Precision Filter: s.click.aliexpress.com/e/_9QxyAh
Push switch: s.click.aliexpress.com/e/_9watAN
Alligator wire clip: s.click.aliexpress.com/e/_9iOwuz
How i made the wire: kzfaq.info/get/bejne/hN2caKiUuK7Pnqc.html
Fuel Injection cleaning In detail: kzfaq.info/get/bejne/gJd8iruXxLepcYk.html
AllSun Injector Tester: kzfaq.info/get/bejne/oJ5_ibp0trjFh6s.html
Wish i knew this before spending $$$
in this video i will show Leaking Fuel Injection cleaning, most people will tell you to replace it
back in 2014, i had 2009 GMC Acadia and the dealer told me to replace the leaking fuel injectors and cost me close to $1000
but in todays video i will show you HOW TO clean GDI injections if its not sparing well or leaking fuel, and when you have that problem, you will ask ur self why is gas coming out of my exhaust
the injectors not sealing gas and it leaks into the cylinder and comes out from the exhaust
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
ali_mechh
alimechh
Like my facebook page:
-------------------------------------------
aliMechUSA/
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon EOS M50 Mirrorless: amzn.to/35BdSsU
DJI Ronin-SC - Camera Stabilizer: amzn.to/3wINHwm
Andoer 3-Wheels Wireless Remote Control Motorized Camera: amzn.to/3vDuf2D
Gopro Max 360: amzn.to/345NNTf
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : ali.hoshyar.311?fref=ts
Like Facebook page: Alimech-1296961967080160/
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

Пікірлер: 678

@sleeve8651 2 жыл бұрын

Man.... Dealership's are gonna hate you for this one ! Great tip ! 👍😉

@AliMECH 2 жыл бұрын

I know 😅

@1madmaxx80 Жыл бұрын

This is hardly anything new. There is an entire industry doing this. This just shows that it can be done "at home" 👍👍

@AUTOOLTECH Жыл бұрын

@@AliMECH haha , we actually don't hate it, andI like your videos. 😁

@greebuh Жыл бұрын

You should go look at how to get those Direct Injectors in and out before you think that this is really DIY. They are NOT easily removed and installed like port injectors.

@zachreyhelmberger894 Жыл бұрын

Yeppers! ANd it keeps perfectly good injectors out the landfill!

@MTc61x 2 жыл бұрын

I highly recommend also changing the seals/o-rings every time you take a direct injector out.

@AliMECH 2 жыл бұрын

Yes good idea

@Ryzen_56X 2 жыл бұрын

Are they available for sale those seals/O-rings from manufacturer if so where can they be bought at ??

@JETJOOBOY 2 жыл бұрын

I was literally going to ask that!

@stevenlamb3971 2 жыл бұрын

I've found kits at local parts houses with various common o ring sizes for AC components (green), I think they have fuel kits too.

@gabriel.brasileiro 2 жыл бұрын

sure. they always break into little pieces and clog the spray and the whole injection

@w3bb0y 2 жыл бұрын

Two quick ultrasonic cleaning tips: >Put the injector inside a small plastic bag and fill the bag with the cleaning fluid. Then fill the ultrasonic cleaner full of water and it the bag in the water, means you don't have to fill the ultrasonic cleaner full of cleaning liquid. >Never put metal directly on the bottom of the ultrasonic cleaner, it can damage both parts, a think sheet of plastic or paper is enough. Look at the more expensive ultrasonic cleaners and you'll see they have cages to stop objects sitting on the bottom.

@Andy-Andeee 2 жыл бұрын

Thanks for the tip 👍

@AlexBonesJones 2 жыл бұрын

Not specific enough instructions ended up getting my balls stuck under the spare wheel in the boot of car

@MarkoftheMouse 2 жыл бұрын

I use a similar method but just use a jam jar or suspend the part in a tin which has cleaning liquid in whilst the USC has water in it

@TheCarpenterUnion 2 жыл бұрын

Ya that's not why the mesh is there. And resting on the bottom isn't bad for them. You just want to decouple it.

@pieterbezuidenhout2741 2 жыл бұрын

Webb0y that is absolutely GOOD advice to those who have brains.

@davidlustrup9847 Жыл бұрын

a single puff of smoke from the tail pipe thats only there upon first startup is also a leaking nozzle/fuel injector because when you shut it off at night it drips all through the night into the cylinder untill the fuel rail pressure subsides, and makes a pool of gas on the piston top that turns into that puff of smoke when you start it up the next day

@GoingOrbit Жыл бұрын

A cheap way to clean injectors out is to soak the nozzles in a small cup of injector cleaner. Let them soak for an hour or more if they are nasty. If they are dirty it usually turns the fluid in the cup orange. Once done spray off the nozzle with some parts cleaner spray.

@calicojackrackham9233 Жыл бұрын

Perfectly safe as well. I was an Electronics Engineering Tech. We used ultrasonic liquid cleaning for military grade electronic components during the manufacturing process. This cleaning process was required by our contracts with the Aviation companies that were our customers.

@54Bloodman 2 жыл бұрын

Thank you my brother for posting this video because we asked you about how to clean gdi injectors It shows how a great person you are and how you care about helping people Really appreciate you brother

@AliMECH 2 жыл бұрын

You are welcome, glad i can help, i will definitely try my best and do video when you guys ask

@scottneels2628 2 жыл бұрын

My sentiments exactly. This worked perfectly on my Jeep. Thank you so much.

@user-mi4yc7pr3x 2 жыл бұрын

Mq where u from bro

@likamero 2 жыл бұрын

Even if we don't do it, it's still so good to watch with satisfaction and learn from your videos👍

@AliMECH 2 жыл бұрын

lol, Thank you so much

@coatercup 2 жыл бұрын

First time I've seen ultra sonic cleaning for fuel injectors. Looking great!

@AliMECH 2 жыл бұрын

Thank you!

@DjDestinyChicago 2 жыл бұрын

I’m watching this thinking the tools used in the video cost as much as a new injector. Man was I wrong! I might order these. Thanks for the upload 👍

@AliMECH 2 жыл бұрын

Glad I could help

@acidnine Жыл бұрын

Yeah, then times that by the number of cylinders.

@Hiim0094 Жыл бұрын

This is such a great idea, a game changer actually! Why haven’t I added an ultrasonic cleaner to my tool kit? Great job sir, thanks!

@AliMECH Жыл бұрын

Thanks for watching, glad it was helpful

@waverider5751 Жыл бұрын

I sure will be adding an ultrasonic cleaner to mine! Thanks, so obvious, yet I never thought of running the mode 4 tester while in the shaky bath. I’ve already got an injector tester similar to yours, but I have Toyota connectors spliced in with the original spade leads.

@InsideOfMyOwnMind Жыл бұрын

Years ago I attached a long hose to an injector, filled it with seafoam, pressurized it and applied intermittent power to the injector. Worked great. If you don't have an ultrasonic cleaner it might be worth a try.

@danfreiday8390 2 жыл бұрын

I use the sonic machine all the time, on any small parts, it cleans like magic, I do alot of motorcycle repair and especially carburetors, my tank is small so so I pull.the float bowls and sometimes have flip the carb and half at a time, I got at harbor freight, about 100$, mine heats up and I use water and dawn dish soap, I also do 3 or 4 cycles, yes i use water and dawn dish soap, about a couple good squirts per tank, its gets dirty fast, but work fantastic, a great to have for every mechanic, and and very nice video, short, sweet, and informative

@fatalballistics 2 жыл бұрын

Nice video works like a charm we as consumers should do more things like this to lessen waste

@AliMECH 2 жыл бұрын

Yes it does! Thanks for watching

@chuckecheese4124 2 жыл бұрын

Brilliant! Used the Ultrasonic bath for cleaning small parts years ago, it does work! Thanks for the video Ali.

@AliMECH 2 жыл бұрын

Yes it does! thanks for watching

@hoost3056 2 жыл бұрын

Great job. Never thought about using an ultrasonic cleaner. Seafoam, yes. I just run a couple of cans in half a tank of fuel from time to time for that concentrated effect. I use my car for fleet work. ( 6 hours plus a day )

@waqarqadeer5217 2 жыл бұрын

Nice. It's satisfying to see after spraying pattern.

@AliMECH 2 жыл бұрын

Yes it's 👌

@grantdubiel4843 2 жыл бұрын

This is why at the dealer I work at, we recommend a fuel injection cleaning every 30k miles, and its $130. We do 2 separate services depending on if ir vehicle is direct injected or port injected

@cavemanindustries5102 Жыл бұрын

I liked the pace of the video. Thank you for adding a tool to my mental tool belt!

@christopherkast8045 Жыл бұрын

I have used Injector Repair LLC in upstate NY and he charges less than $20 US dollars for ultrasonic cleaning, changes O rings, seal and screens and give a full test sheet with dynamic and static testing, Brought the 4 Bosch Injectors on my Porsche 944 back to factory spec.

@bryanrocker5033 Жыл бұрын

I have 2 ultrasonic cleaners and I use them on a wide variety of things. They are great for removing rust if you use vinegar. That is good to know.

@otm646 2 жыл бұрын

You cannot set metal directly on the bottom of the ultrasonic cleaner, that reflects the energy back into the transducer and you will destroy it. You need to use something to act as a spacer a little plastic tray works great.

@tj-hero 2 жыл бұрын

you are one of the best mechanics in the youtube 👌🔥

@AliMECH 2 жыл бұрын

Appreciate that

@johndemore6402 Жыл бұрын

brilliant idea economical no waste going to the salvage/ scrap yard 🤗👍

@Adroit1911 2 жыл бұрын

So smart, using the ultrasonic cleaner!! Im about to get a bump in MPGs

@alexeyb2990 2 жыл бұрын

Молодец! Я не знал, что бывают такие тестеры. Спасибо! Нечто подобное можно проелывать с дизельным commonrail.

@teddd2009 Жыл бұрын

Priceless! Great job thinking outside the box.

@AliMECH Жыл бұрын

Thank you! Cheers!

@XenoRacing 2 жыл бұрын

That cleaner is hard on the rubber, you should remove the gaskets from the injector before throwing them in, also would be ideal to put a piece of plastic between the bottom of the ultrasonic cleaner and the metal part of the injector.

@RedTekno 2 жыл бұрын

Genius! Love it, man. Thanks 👍

@AliMECH 2 жыл бұрын

Glad to help!

@IMPORTANTVIDEOS7 2 жыл бұрын

My friend turn the injector where its front part is facing down into the liquid so the sonic waves can go up in the little holes that are clogged. You are just laying it on its side and if u clean it also like i pointed out it will allow those holes to really get clean. Just tryin to help.

@davedeatherage4902 Жыл бұрын

Thanks again for this second video on cleaning fuel injectors, I watched original video.

@AliMECH Жыл бұрын

Thanks for watching

@Engineerboy100 2 жыл бұрын

Sweet video! I bought a multi injector clearer and will make videos soon, but this was pretty cool.

@AliMECH 2 жыл бұрын

Cool, thanks!

@RJ6AV6 2 жыл бұрын

Nice clear instructions, great video! 👍

@AliMECH 2 жыл бұрын

Glad you enjoyed it!

@ewconway 2 жыл бұрын

Awesome DIY educational video. 👍. Thank you!

@AliMECH 2 жыл бұрын

Thank you too

@mrlondon963 2 жыл бұрын

Excellent tip, thank you.

@AliMECH 2 жыл бұрын

You're welcome!

@dinonaccarato2989 7 ай бұрын

Well done Pisano, great tip

@billwilson3665 Жыл бұрын

I have an otc canister injector cleaner. I disable the fuel pump and let the car run only on otc injector cleaner, this has worked well.

@TehButterflyEffect Жыл бұрын

Huh. I never thought about using my ultrasonic cleaner for this. Good tip!

@AliMECH Жыл бұрын

Glad it was helpful!

@MediaTruth_ Ай бұрын

Thank you for the knowledge, and the items that you used to clean these expensive parts.

@AliMECH Ай бұрын

Glad to help

@HeavenlyDivin Жыл бұрын

You taught me so much. Thanks dood. Love your accent.

@AliMECH Жыл бұрын

Glad to hear it! Thanks for watching

@mrcrenov 2 жыл бұрын

Merci beaucoup tu m'as sauvé la vie et mon argent

@joshgoodman5667 2 жыл бұрын

On aircraft engines, we would soak the injectors in Hoppes No. 9 gun cleaner, then blow them out. Usually ran great after that!

@stuartbear922 2 жыл бұрын

Good to know!

@speedy_pit_stop 2 жыл бұрын

Very useful. Thanks for sharing.

@AliMECH 2 жыл бұрын

Glad it was helpful!

@a_w_bukhari7579 2 жыл бұрын

Very helpful content Ali!

@AliMECH 2 жыл бұрын

Thanks

@charlesgray3810 Жыл бұрын

Very usefully tips you can clean any fuel injector if you know how it not hard to do.

@SK-or9bo 2 жыл бұрын

Well done. I'm gonna try this.

@DumbSkippy Жыл бұрын

Brilliant idea of combining the two items. Ultrasonic ands injector pulser! Thank you !

@AliMECH Жыл бұрын

Yes it was, thanks for watching

@HungryH1951 2 ай бұрын

Excellent information. Thanks for posting.

@AliMECH Ай бұрын

Thanks for watching

@SuperSedingAngeL-yr0 Жыл бұрын

Wow, this was actually a very well made and informative video. Go figure. 👏

@AliMECH Жыл бұрын

Thanks for watching

@GotrekGurninsson 2 жыл бұрын

I clean carburetors the same way now. I don’t bother taking them apart anymore. Just ultrasonic bath in solvent.

@frankbiz 2 жыл бұрын

Great advice! 👍🏻

@AliMECH 2 жыл бұрын

Glad it was helpful!

@matthewdorricott4514 2 жыл бұрын

We recondition diesel and petrol injectors. .we have heated ultrasonic cleaners for the petrol injector cleaning 80 degrees Celsius for 2 hours. Job done.

@ronaldhaugen5967 3 ай бұрын

Thank you very much ,I'm sold 😮

@AliMECH 3 ай бұрын

You’re welcome

@subhajitghosh8 2 жыл бұрын

Short and sweet. Really nice...

@AliMECH 2 жыл бұрын

Thanks a lot 😊

@waitwhatwhohuh 2 жыл бұрын

This was very helpful. Thanks

@AliMECH 2 жыл бұрын

Glad to hear it!

@carlarthur4442 2 жыл бұрын

Great video thanks for the info 👍 😀 👌

@AliMECH 2 жыл бұрын

thanks

@bobbyyounger7632 2 жыл бұрын

How cool is this ! your fantastic

@AliMECH 2 жыл бұрын

Thanks Bobby

@bugbear6875 2 жыл бұрын

Awesome! Brilliant! Thank you for this!

@AliMECH 2 жыл бұрын

Thanks

@Mickcotton Жыл бұрын

Absolutely Amazing ✅ Thank You So Much I really appreciate it. Take Care My Friend

@AliMECH Жыл бұрын

Thanks, you are welcome 🙏

@josipmatic4732 Жыл бұрын

I clean DPF cooler with ultrasonic tool. Excellent job and cheap as well

@AliMECH Жыл бұрын

Thanks for watching

@fabyo9291 2 жыл бұрын

Extraordinar trebuie sa verific si eu la bmw e39.fain video 💪

@jamesanderton344 2 жыл бұрын

Good video. Clear explanation

@AliMECH 2 жыл бұрын

Glad you liked it

@CHIBA280CRV 2 жыл бұрын

Fantastic informative video sir thank you sir 👍👍👍👍👍

@AliMECH 2 жыл бұрын

Most welcome

@sgomez3047 2 жыл бұрын

Great stuff...thanks for the tips brother!

@AliMECH 2 жыл бұрын

Thanks

@remembergodisalwayswithyou6862 2 жыл бұрын

Another great video thanks bro 👍have a good day from Morocco ^-^

@AliMECH 2 жыл бұрын

Thanks for watching

@remembergodisalwayswithyou6862 2 жыл бұрын

@@AliMECH you're very welcome 👍

@nathanneumann5083 2 жыл бұрын

Great job! Thanks!

@AliMECH 2 жыл бұрын

thanks

@jianoconnor8414 2 жыл бұрын

Very good !

@egilsjolander779 7 ай бұрын

Good video. To save cleaning agent, first put part in zip bag together with minimum amount of cleaning agent. Then fill ultrasound bath with ordinary water and put bag in it.

@JAye365 2 жыл бұрын

Damn that’s useful!

@joeyriveira6697 Жыл бұрын

Mucho mahalos for the injector info

@Jack-qn4vt 2 жыл бұрын

I'm glad it worked for you. I've sometimes caused fuel injectors to start leaking (aka ruined) by ultrasonically cleaning them on the proper injector machine. Don't know why but it's happened a few times now.

@destruxxx Жыл бұрын

If they have rust inside the nozzles the ultrasonic will remove the rust and then they will leak. I've had this happen several times on injectors that were sitting in a car that wasn't in use for a few years.

@MyAutoproblems Жыл бұрын

Just get them replaced. These Acadia are known for poor fuel injectors. They leak. I always replace them as they will damage the catalyst if not replaced sooner

@CWE284 2 жыл бұрын

Perfect 🤩

@hellohello8556 2 жыл бұрын

Great video thanks mate. 👍

@AliMECH 2 жыл бұрын

Glad you enjoyed it

@joepenfield Жыл бұрын

Great video. Thanks.

@AliMECH Жыл бұрын

Glad you liked it!

@officermeowmeowfuzzyface4408 2 жыл бұрын

Or build your own tester with a 555 timer, a transistor, a diode, a few resistors and capacitors and a relay.

@beterbey 7 ай бұрын

Yes, that's what I was thinking, too.

@Phil-D83 2 жыл бұрын

I use marvel mystery oil in the gas for 5 or 6 subsequent gas tanks. Works well

@caspfornia Жыл бұрын

Thanks great job 😎👍

@AliMECH Жыл бұрын

No problem 👍

@billarroo1 2 жыл бұрын

This is a Great idea, I subscribed Thanks

@AliMECH 2 жыл бұрын

Thanks for the sub!

@kelsycunningham8452 2 жыл бұрын

Wow. Huge difference.

@AliMECH 2 жыл бұрын

Thanks for watching ✌️

@klecoxs2 Жыл бұрын

Another great video thanks for posting 👍

@AliMECH Жыл бұрын

No problem 👍

@lankaat 2 жыл бұрын

Awesome advice!!

@AliMECH 2 жыл бұрын

Glad it was helpful!

@jaqueprevost2708 2 жыл бұрын

very uzefull thanks bro

@randyschock7374 2 жыл бұрын

Great video. Thank you

@AliMECH 2 жыл бұрын

Glad you liked it!

@living9377 3 ай бұрын

Great video thanks for sharing!

@AliMECH 2 ай бұрын

Thanks for watching!

@Pdz727 2 жыл бұрын

That’s absolutely amazing how did you ever think of that 🤦‍♂️

@jamesfulerten8494 Жыл бұрын

Great information.

@AliMECH Жыл бұрын

Thanks for watching

@OFFICIALMightyMac 2 жыл бұрын

Great tip, also if have filers to replace do that as well.

@AliMECH 2 жыл бұрын

Great point

@leecruz2952 Жыл бұрын

Great video!

@AliMECH Жыл бұрын

Thanks for the visit

@beryean1366 Жыл бұрын

I will try it on my snowmobile injectors

@windowlicker6996 Жыл бұрын

I like to use Lucas oil fuel injector cleaner. Like one little cap full every 2 or 3 gas tanks keeps them nice and clean.

@russnurse2b807 2 жыл бұрын

That's great! Thanks for the information. I have a Honda with over 200,000 miles. There doesn't seem to be a problem but maybe I'll pull them out and clean them anyway. I just have to get an fuel injector tester.

@AliMECH 2 жыл бұрын

Thanks, that's great

@borkganza9627 2 жыл бұрын

If it ain’t broke don’t “ fix it”

@nickvlaanderen Жыл бұрын

As borkganza says, if it runs good, do nothing. The biggest problem you have with cars that are not a daily car and are parked long. The ethanol in the fuel cloggs the injectors.