No video
WLToys 124019 MUST DO! Pre Run Service - Checking Diff Grease & Oil Filled Shocks!
Рет қаралды 9,978
Күн бұрынIf you bought the New 124019 Buggy from WLtoys you might want to watch this video and follow these few simple steps before running this RC for the first time to get longevity and trouble free maintenence out of it!
If you liked this RC Video... PLEASE BE SURE TO LIKE & SUBSCRIBE!
It's much appreciated and enables me to make further RC Content for you Guys/Gals on a Weekly Basis
Also Purchasing from the Product Links Below also help Support the Channel!
MAKERFIRE now have the New WLtoys 124019 Buggy IN STOCK Now Ready to Ship out to customers! Click on the link here to secure yours today!
👉 shop.makerfire...
Make sure you use this exclusive Coupon Code PerthWestOZRC
to get a further 7% off the price when you use the product link above only! After the 24hr period is over the code will still work for 6% off the listed price!
Metal Parts kit available now in Blue and Red 👉 bit.ly/2Iq4sbv
124018 Sand Dune Buggy is available here
shop.makerfire...
Wltoys 144001 buggy here 👉 bit.ly/2I14831
shop.makerfire...
Use this code MKF6 for 6% discount on purchases!
#Wltoys124019 #perthwestozrc #RCBasics
FOLLOW MY OTHER SOCIAL MEDIA LINKS! 😎👍
You can Now Follow me on Facebook here
/ perthwestozrc
Instagram here www.instagram....
TWITTER / perthwestoz_rc
Tumblr www.tumblr.com...
Check out some of my NEW PWOZRC Channel Merch here at TeeSpring teespring.com/...
If you would like me to review any of your RC products on this channel, contact me here via email 1991v8soarer@gmail.com or message me direct on my PWOZRC Facebook page link above
@joebloggs4650 Жыл бұрын
Awesome advice. I really like your videos. I have done the diffs and the shocks on all of my cars from this video and its an amazing difference. Keep up the good videos please.
@PERTHWESTOZRC Жыл бұрын
Cheers Joe, glad this video helped bro 👍
@RDsRCReviews 3 жыл бұрын
Can't wait until I get this car. Great tips to get started and keep it running well.
@heavymetalrc7520 3 жыл бұрын
Yes sir, I had to do this also. Runs a little quieter when its lubed properly also. Good video.
@PERTHWESTOZRC 3 жыл бұрын
Yeah there were many questions on my review first drive test video so had to check out for myself to see if there were any grease in these diffs but its just like the 144001. definitely needs doing hey! it's heaps quieter now, cheers for watching brother
@dubaudiproject861 3 жыл бұрын
Great coverage from unboxing, test drive, and tear down.
@PERTHWESTOZRC 3 жыл бұрын
Thanks very much for watching all the videos so far, appreciate it!👍
@KurtsRCs 3 жыл бұрын
Nice I’ll do that when I get mine
@Das-Veilchen-X 3 жыл бұрын
The Rc Car is a Biest 😎.
@FifthScaleOrBustRc 3 жыл бұрын
First son!!!! Watchin now my fellow 124019 brother!😉
@PERTHWESTOZRC 3 жыл бұрын
Legend! cheers for watching man! 😎🤘🍻
@TonysRcTechboom 3 жыл бұрын
I do exactly what you do to all my Rc's, always check the Diffs , the oil and all the screws 👍 great to share this type off Video, great Tips 👍 can't wait to get mine for Christmas 👍
@PERTHWESTOZRC 3 жыл бұрын
Thanks Tony, yes preventative maintenance like this is important really before or quickly after taking these RCs for a run, definitely helps longevity of the gears in the long run!👍
@ruflasto1 3 жыл бұрын
Exhalent. Video my Brother. Showing What to do my On this buggy. I Always strip my new rigs down to make sure their right..lol. Big thumbs up Dave.
@PERTHWESTOZRC 3 жыл бұрын
Thanks brother, i wanted to make this video a week ago but just didn't have the time between work and making other review vids. I always go through em and check, but usually after my initial test review is over and done with. Some RC's are already done properly from factory but its definitely important on this model to do a quick service to it for longevity of those diffs 👍🍻
@ruflasto1 3 жыл бұрын
@@PERTHWESTOZRC For Sure my Brother.
@brunopt2406 3 жыл бұрын
I need to get one of those. They look like a lot of fun.
@PERTHWESTOZRC 3 жыл бұрын
These are fun buggies Bruno, just like the previous 144001 launched last year which is a very popular RC amongst many of us hobbyists..cheers for watching mate 👍🍻
@brunopt2406 3 жыл бұрын
@@PERTHWESTOZRC Is it durable? How arw the diffs amd pinions? I was wondering if it could take a small brushless combo.
@PERTHWESTOZRC 3 жыл бұрын
@@brunopt2406 Yes these can take brushless no problems, everyone basically goes brushless on these at one stage or another
@BIGDRONEFLYER77RC 3 жыл бұрын
Great video brother, we have always checked all our cars. So many I found dry or in some cases I found one with sand and water. Cheers bro
@PERTHWESTOZRC 3 жыл бұрын
Cheers Donnie 👍
@electroddxful 3 жыл бұрын
Looks like alot of fun. Thanks for sharing 👍👍👍👍
@naelrc4583 3 жыл бұрын
Thanks for this great sharing my friend! Really enjoy watching & help me to take care of my rc. Awesome rc btw. Love the look & design. Liked & subbed! Hope to see more of your work😁👍🏼👍🏼👍🏼
@PERTHWESTOZRC 3 жыл бұрын
Thanks very much for watching , glad this video could help you and thanks for supporting the channel appreciate it! 👍
@naelrc4583 3 жыл бұрын
@@PERTHWESTOZRC Thanks for reply & hope to see you run this awesome rc soon. I did video about wltoys too on my channel & please do come by watching my friend😁👍🏼
@davidnadeau9460 8 ай бұрын
Just fill em compressed you get exactly to the right amount.
@BabyAbarth 3 жыл бұрын
Great video David, very informative! 👍
@PERTHWESTOZRC 3 жыл бұрын
Thanks Joe it’s been a common question in my previous videos about the diffs, rather like the previous 144001.
@longthanly7061 3 жыл бұрын
Good job 👍
@PERTHWESTOZRC 3 жыл бұрын
Thanks fkr watching bro👍
@ljsmixbox44 3 жыл бұрын
This suppose to be my next car.
@PERTHWESTOZRC 3 жыл бұрын
Awesome Joey,you will like this buggy 💯👍
@islandrc-duke1972 3 жыл бұрын
Great video and service to the RC
@PERTHWESTOZRC 3 жыл бұрын
Thanks Duke
@sc10rs 3 жыл бұрын
Nice one brother! 😊🤙🍻🇦🇺
@PERTHWESTOZRC 3 жыл бұрын
Cheers for watching mate 👍🇦🇺🍻
@tripyramidpictures9224 Жыл бұрын
I use Mobile 1 Synthetic bearing grease with high temp.
@robertredzich7292 3 жыл бұрын
Mine has been shipped, expect it this or next week. I'm not a great one for tearing down my cars but, this looks like a good place to tinker. Nice info. 👍🏻👍🏻👍🏻
@PERTHWESTOZRC 3 жыл бұрын
Thanks Robert👍
@tripyramidpictures9224 Жыл бұрын
I did this to my 104001, but I still need to do the front.
@johnotooledoggames2336 3 жыл бұрын
👍🇮🇪. Very good
@chrisclough3117 3 жыл бұрын
Thank you so much for showing the pictures of how much grease was applied! I wish you would have showed how to get the right amount in the shocks and pinion/motor gears. :(
@PERTHWESTOZRC 3 жыл бұрын
I only took a tiny bit of oil out, this doesn't really apply to the ones they release now anyways cause I think wltoys watched these videos after release and fixed the overfilling issue
@RCModSquad 3 жыл бұрын
Nice video David! I wonder if the grease got squeezed out of the ring and crown gears? You can also drill a small hole or cut a relief in the shock piston to let the oil past. You can also use a lighter weight oil. Have a great day mate and be safe out there!
@cwatson42785 3 жыл бұрын
It looks like the grease flung off the crown gear after the first use. Isn't that somewhat normal? And is it that crucial to have grease on that outside crown Gear? Just curious your thoughts. But I think they had it on the gear and it spins off and onto the diff cup. I don't think they just put that on the plastic case. Great video, I'm sure it will help alot of owners of this car.
@PERTHWESTOZRC 3 жыл бұрын
Yeah I’m not so sure as there is another guy that pulled his apart as well and showed the grease around the plastic diffs housing as well and I don’t even think he ran his 124019 before hand, the gears were pretty dry on the crown and centre shaft as well, front was also the same so who knows! Anyways I like to put some grease in the crown gear etc just helps with reducing wear, just something I’ve always done ✅ thanks for watching Chris 👍🍻
@giveitsomepain 3 жыл бұрын
@@PERTHWESTOZRC The grease is like that from the factory, i did this to my 14401 before even running it and the grease was the same so i just scraped it down onto the gear.
@GTARC_au 3 жыл бұрын
Good home mech advice Dave. Do I need to buy some bandaids for my repairs... 😃😃 We've been locked out of WA. Bummer!!
@PERTHWESTOZRC 3 жыл бұрын
Thanks for watching mate👍
@tonymcclendon-hobbytime7727 3 жыл бұрын
That color look nice, it appears to be well built. Does it come yellow or red as well?
@PERTHWESTOZRC 3 жыл бұрын
Hi Tony only one colour at this stage brother, cheers for watching 👍
@Van_City 3 жыл бұрын
Very informative video Dave I am very tempted to grab one of these for myself. Take care buddy Cheers 🍻
@PERTHWESTOZRC 3 жыл бұрын
Cheers Dan, these are a great buggy, pretty quick out the box and perfect for brushless setup! 👍
@mattiasandreasson9047 Жыл бұрын
Do you just mix the grease with the factory white grease or do you clean it all out first?
@PERTHWESTOZRC Жыл бұрын
I cleaned the factory grease out then applied my own new fresh grease in there
@garethhuwwilliams6019 3 жыл бұрын
Could you put silicone oil rather then grease in there? Is it a sealed dif?
@PERTHWESTOZRC 3 жыл бұрын
No it’s not a sealed diff so won’t hold oil, thanks for watching 👍
@parker1ray 3 жыл бұрын
My 144001 shocks were so weak that I just replaced them with better shocks.
@hunch0_OG 3 жыл бұрын
Hey bro.will this differential fit on my xinlehong 9125 cause the stock ones are constantly breaking.
@PERTHWESTOZRC 3 жыл бұрын
No these are only compatible with WLtoys buddy, thanks for watching
@fatjoecanadian81 3 жыл бұрын
I use Marine lithium grease
@PERTHWESTOZRC 3 жыл бұрын
Yeah a lot of people do, but I've been using high temp bearing grease and it works great at keeping the gears in good condition, thanks for watching Joe👍
@fatjoecanadian81 3 жыл бұрын
@@PERTHWESTOZRC thank u for relying
@PERTHWESTOZRC 3 жыл бұрын
No worries Joe I try reply to everyone if I can, have a good evening 👍
@titankh846 3 жыл бұрын
Thank you for the tips! Great video! May I know what's the max length of a lipo battery we can squeeze into this buggy?
@PERTHWESTOZRC 3 жыл бұрын
Stock battery is about 10.5cm long, thanks for watching
@batcave55 3 жыл бұрын
Which did you prefer ,this or the sand buggy version,thanks for your reviews 🇬🇧
@PERTHWESTOZRC 3 жыл бұрын
I like both in their own way, the 018 is better for bashing while this 019 is better for speed runs
@batcave55 3 жыл бұрын
@@PERTHWESTOZRC great...thanks,that’s just what I need to know
@alexbarquin9 3 жыл бұрын
What oil does the shocks use? Will a normal motor oil like 5w30 work or does it need a special thinner oil? Great dissection of the car mate 👍
@PERTHWESTOZRC 3 жыл бұрын
Not sure of the oil weight that wltoys uses mate, I just took a little out of each one. Cheers for watching👍
@mrdangerdanger2189 3 жыл бұрын
Why grease the diffs and not use diff oil?
@PERTHWESTOZRC 3 жыл бұрын
Because that’s what I prefer to use on all my rc cars, never had an issue yet, also the diff's on these are not sealed for oil
@joebloggs4650 Жыл бұрын
Hi everyone. How do you undo the screw on top of the steering clutch so I can remove the plastic main drive train shaft cover? I can undo the screw on the bottom of the chassis and have tried holding that with a screwdriver and then trying to undo the top screw but it just spins like it's threaded. I've seen another video of this car and they easily unscrewed the top one. Any ideas? Thanks in advance. Cheers.
@PERTHWESTOZRC Жыл бұрын
Yeah in some cases wltoys use friggn glue instead of loctite on the screw heads, that has happened to me on the steering clutch screw as well, it makes the whole stand off spin, get a screw driver on the bottom of the chassis and hold it there and another driver on the top screw and break the glue off so you can successfully undo it.
@joebloggs4650 Жыл бұрын
@@PERTHWESTOZRC Hey mate, thanks for the quick reply I've tried what you suggested. That was what I was trying to say in my post above but yeah there is just no give the bottom screw just keeps coming out on the bottom of the chassis when I do that. Any other ideas? Cheers.
@joebloggs4650 Жыл бұрын
Hey mate I got it. Thank you. I just needed another person to hold the car and lots of force and your suggestion worked. Thats quite disappointing wltoys do that. I have spent the last 3.5 hours trying to undo that screw by watching videos. Now I'll continue on your video to do the diffs. Is it correct NOT to put grease on the plastic drive shaft spur gear and metal gear on the motor?
@John-fo9jy 3 жыл бұрын
Could someone please recommend a suitable battery alternative or upgrade thank you.
@chowtm19 3 жыл бұрын
What Scale Is This? Is it the same size as Losi Half 8?
@PERTHWESTOZRC 3 жыл бұрын
1/12 scale
@dalebirchall9536 2 жыл бұрын
My new wheels don’t fit my 124019
@PERTHWESTOZRC 2 жыл бұрын
Maybe you bought the wrong hex size, the wltoys takes a 12mm hex
@ksrnate 3 жыл бұрын
Hey dude! You know that igpsort GPS you use. Do you know how to change from kmh to mph? I've just got one and I can't figure it out man?? 🤔
@PERTHWESTOZRC 3 жыл бұрын
Think it only reads in kph bro, I’ve never been able to set it to mph. Check the user manual and see if it says anything
@ksrnate 3 жыл бұрын
@@PERTHWESTOZRC It doesn't say anything about changing it? That sucks! Thanks for the reply mate. Love the videos 👍🏻
@theocy1986 3 жыл бұрын
Will this increase speed as well? What is the top speed of this buggy? Stock buggy without any enhancements.
@PERTHWESTOZRC 3 жыл бұрын
It will help with reliability not necessarily speed mate, lack of grease with lead to premature failure of these diffs as they are metal on metal
@theocy1986 3 жыл бұрын
@@PERTHWESTOZRC thanks for the swift reply. I just orded one of these and favoured your video as a guide. Lovely job mate.
@PERTHWESTOZRC 3 жыл бұрын
No worries mate, Thanks for watching and have a good new year 👍
@InTheSh8 3 жыл бұрын
That's a bit of a high price for a 1:12. You get the Quanum Vandal with brushless combo for 100 bucks. I won't say that the Quanum is a good car. But considering the fact that Wltoys has cloned an LC-Racing car doesn't make it good. I saw a guy getting frustrated opening that thing up (the 144...) and stripping screws and not being able to change spur gear cause they used locktite literally everywhere. For me the Wltoys were always a pain in the ...! That diffs are made of metal but in the 12428 this was not preventing them from losing right distance to each other and macking crackling noises. And those dogbones, they bend immediately, unless Wltoys uses better metal here. Crazy prices lately. That 959b is the most ridiculous car I've ever bought. They really want 50-60 bucks for a car that comes with bushings and is so wobbly constructed that it will NEVER go straight, even if you beg it! And here in Cyprus they would even take double the price for a car that will break rear knuckles due to being too thin for the force that the 1:10th motor is able to put on it. Sorry for my rant. I'm over it, already. It's a beauty though, this new one you got.
@InTheSh8 3 жыл бұрын
I would also in that price class consider to buy the 1/10th buggy from HSP. I have the drift car and used it as a touring with a 4S brushless motor (with 3s battery). One can say whatever they want about HSP, but I didn't break anything since 2 years, now. Nothing. Buggy should be fine. The MT has it's flaws as we know.
@PERTHWESTOZRC 3 жыл бұрын
I own 2 HSP myself, the 1/8 nitro mt and the Fury Ace 10 scale brushless buggy, both great quality RCs with no issues
@InTheSh8 3 жыл бұрын
@@PERTHWESTOZRC Yes, I think I remember the 1:8 nitro on your channel. Yeah, man. Nice to have stumbled over your channel again. I'm not much into RC anymore but still follow and watch if there's sth new on the horizon. Cheers
@gdhall5311 3 жыл бұрын
This is a big help Dave, I haven't really did a lot of mods to my cars and trucks but I am learning. I am building a 1/8 scale truck right now and I can't get the motor to work so where I purchased it from, they asked me did i calibrate the esc. I have never had to do that before. Have you ever had to do that for any of your vehicles?
@PERTHWESTOZRC 3 жыл бұрын
I haven't had to calibrate the ESC on my rc trucks before but its easily done...I'm sure there are many videos out there to learn on the procedure Gregory👍
@gdhall5311 3 жыл бұрын
@@PERTHWESTOZRC Thanks for responding Dave but I figured it out and the truck is operating very well.
@stephenksiazek812 3 жыл бұрын
To much....to little....OMG WLTOYS! 😡
@PERTHWESTOZRC 3 жыл бұрын
Lol thanks for watching
TheRcSaylors
Рет қаралды 164 М.
Guy Menierian RC
Рет қаралды 9 М.