Pretty impressive speed for 2S I'm excited to see what does on 3S. It's also very quiet. Awesome video!

Dave that was fantastic! That is exactly what that car needed. Perfect setup without a lot of hassle. Looking forward to 3s.

Awesome video!! Answered alot of questions I had. Probably going to copy that set up. Thanks again for the great info.

Love this channel. I first drove my new 144001 yesterday and I was utterly amazed at how fast it is. I named mine "Buster"

You have the greatest toys. Seems it helps to know how to fix and modify your vehicles. I imagine it is mostly learnt along the way... Thanks for the video... TTYL...

Great build and nice speed run

Thank you for another down to earth and great review.

Wow. impressive knowledge. I always learn so much from you, thanks for the comments on my video telling me what is going on.......you rock

I really like that you are making your RC's faster using Brushed motor setups, I also like to challenge myself making brushed cars go really fast!

Nice work! I was just asking you about a lower turn motor! Thanks for the video! Enjoying my 144001 so far. No issues. 👍🏻

That's a pretty nifty RC. Goes fast!

Thanks for your good sharing. Your experience is very helpful to me: Surpass 540 motor shaft is a bit long for 144001!

Always good info, thanks for sharing your thoughts and knowledge of these trucks😎🏜I've got bunch of these hobby wing 1060's and have never had one fail,

Thanks for the informative. Goodtimes. 🙂👍

Looks good, Nice video my friend, Thanks for sharing and have a great rest of your day and stay safe out there. 😁

That's a great video and I learnt a lot, thank you! 😊 Wish I had more time to watch through your videos. I can't wait to see what speed you get with a 3s! 🤔😁 Take care, stay safe! Kindest regards. ☺️

Really nice car, and a great video, thanks for sharing

Hi darlin!! Great to see you and you're toy's!! Tyfs have a great day! Much love to you 💞💞

Impressive sir, i love that you stayed in hobby :)

Awesome video good stuff on the motor mount nice gyro been a long time since I had a rc that could fit my hand 🖐🤪 great job thumbs up 👍 👊🤟

it's cool to be able to see inside these little fast toys.

Impressive 2s speed, I can’t imagine 3s!👍😊 I finally got one of these on its way to me!😃

Hiya fella, just found your channel in David Bleasby’s comments so jumped over, I know very little about rc cars but enjoy watching. Just liked and subscribed o won’t be long before you hit 1k 👍🏻👍🏻 thanks for sharing 🤩🤩🤩

Wow that one really books too!! Such a fun hobby

HEY BROTHER I LIKE YOUR VIDEOS, YOU'RE EXTREMELY INFORMATIVE, IN ANYTIME I HAVE A QUESTION MOST OF THE TIME I JUST REFER TO ONE OF YOUR VIDEOS, MOST OF THE TIME 😉 I'm Bobby and I'm back quiet from Providence Rhode Island

Hey there David, that was a very nice build👍🏽and that speed run was really neat 😎🔥!! Superb video👌🏾. Hope you have a wonderful evening.

Very nice, good job my friend!

cool dude loved it man

I have almost the same setting(hobby wing 1060 ESC&13t motor),tried many times,and got 84.5km/hr on 2S battery.Please try some more time and it will be faster!👍😃

Awesome! Have a lovely day! 🌞🌞

I am not an expert but I love learning new things no matter what the topic, we never know too many things, I am a very curious person and I adore to leave my comfort zone! 2:57 zoom yes! :) so we can see it clearly! You are so knowledgeable about these cute mini cars which i adore! 😀👍🆒

Great work brother, nice!! 👍🏼👍🏼

nice great video man!

amazing intersting work :)

My 144001 is on the slow boat from China. I can’t wait to get my hands on it. I got the one with the bigger 2s battery. I got a Traxxas 12t 550 motor to try in it. I also have a brushless motor sitting here. Just need a esc. Then I need to figure out which servo to get. Great video 👍🏁

"Hello Everybody" Great Intro! Your vids are great!

Hi, I really liked the video. Have a great day.

Good job David 👍 that surpass hobby motor has some good power and yep i love my Jumbo ..ah.. i mean Dumbo RC transmitters as well 😄 Looking forward to the 3S runs on this setup, 44mph / 71kph on 2s is pretty darn quick my friend

Hey 44 is a great number 😉👍

Nice speed increase! I got my 144001 a few days ago.Fun car. Needs to be faster however.I am still waiting for my JUMBOrc haha. Just poking fun..Can't wait to get it.

That is cool!

Subscribed my friend.. will be checking out your playlist on this car. P.s looking forward to the 3s test ;)

Good job

Hope to see you again

Sweet 👍, NC MOUNTAINS 🏞 backyard RC..

I haven't read through all the comments, but I know a much easier solution to the wheel/axle nut problem... Just get a thinner wheel hex. Example..my stock hexes on my Losi M8 was like 8mm thick, but the aluminum hexes I replaced them with are only 5-6mm thick. Leaving more threads at the end. I didn't do it to gain more threads, the axle shafts we're properly sized, but I always have a little thread showing no matter what rims I put on it. Look for a set of MRC aluminum hexes, or touring car 12mm hexes, which generally have a thinner profile than off-road 1/10 hexes. Just a thought 🤔

I love your videos my friend

Morning Dave

nice great Video

ya 3S for sure bro!

Dave did you ever try a 3s yet with the 13t brushed conversion?

Wow.. Great skill. Please stay connected.

Good video. Where do you get the better quality screws for this car? Thank you.

Good afternoon... Thank you so much for sharing your video with us!!! Have a great weekend... What's new on our channel? After 9 months stopped, I flew an RC Plane again, my training plane, an old BIX3... but it was quite windy, it wasn't easy... be welcome...

Great vid. 😀. What servo are you using?

How fast? I would have guessed TOO FAST 😁 but that thing seems really stable 👍

Nice video!. Can i keep the original motor, change esc and use 3s?

Nice mode I like the motor. What servo are you using. Mine is still stock and I was going to run it on 3s like I did once before and I hit the gas and heard a pop now the servo don’t work but i was thinking of getting rid of the stock electronics. I now the servo has to be small to fit under the drive shaft

Did you have to buy a new gear. Or did you get the old one off. That seemed easier than going brushless.

Hello David, thanks for your videos on the 144001! I’m looking for a bigger 2s battery pack, do you know the Max C rating and capacity the ESC can take? Would it run on a 2s 4000mah 30c Pack? Greetings from Germany!

Bash with that combo and check the temperature. I'm planning to run with 14t motor.

I know I'm late to the game here, but I just picked one of these up (V3 according to your information) Your videos are great. Did you notice the factory esc and motor getting excessively hot after a single pack? Also I have noticed the lipo cup off is very low, the battery has dipped below 3.2v per cell a few times. Also what size servo is it using, I bought a micro savox for it...but it is too small, it seems to be some where in between a standard 1/10 and the micro in my dromida 1/18th...

Hello. Loving this educational video. Do you think Surpass Hobby 550 12T motor can run with stock ESC without any problems? Will it go faster than stock motor ? If not , do you know the reason why ?

If stock is 30 mph what would be the quickest way to get 40 mph? 44 mph from this combo is impressive, but I was hoping to do only a motor swap. There is a dizzying amount of brushed motors for sale. Do you know what the turn count is on the stock motor? It seems like a lot of people do 540 size, but what if I stuck with 550 size? I would like to keep some of the fun low-speed 4wd punch and drift capability that it has stock and not just turn it into a speed demon.

I have a new 12 turn 550 armma mega motor. Would it be worth the swap on stock electronics?

Do you think the stock esc combo would handle that motor?

Did you break the motor in before you gunned it? Ive bought the same setup except my surpass motor is a 12 turn .i havent installed it yet, but that run was pretty cool, so i guess i better pull my finger out and swap them over. Love your vids keep em coming 👍

Hi sir, this 13 turns brushed motor is it possible for stocked 144001 esc to handle it without burnt

I wonder how many people get the connection between Mod Squad and "hello everybody" I wanted to ask, on the a959b, is there a 3 wire servo that screws right in? Do you know which, because I've tried several now that won't.

Hi, asking a question for advice, i am a newbie :) I bought and recived two 144001 two weeks ago. My issue is that i already have burned two motors. It has happened after just 10 minutes running on included LiPo 2600mA battery. The car stops and smokes. I have only half speed adjusted on the controller. MY QUESTION: Is this common? Will a heatsink solve this overheating issue? Is there a better more durable brushed motor exchangeble with the original stock 550 motor? Thanks in advance!

What was the temp of the motor on 2's? 44mph is rolling brother! 3's 😁👍 Nice! Awesome lil buggy!

Good vídeo!! Link to buy the motor and ESC pleaaaaase :))

So overall, which is the best brushed engine for 144001? I am looking for crawling and go to the the trail, I am okay with stock top speed.

so that radio only works with one model ? you can't use it to run mulitiple models programed into it? thax

I'm going to be buying a 12428, and I'm definitely going to be switching away from the stock electronics. And I was considering moving it to a brushless motor, but seen a few videos where its just notchy in low speed situations (I do believe cogging was the term) vs a brushed motor, and I seen a few videos where the brushless motor was really smooth, so I guess motor and or ESC or both play a role in this. I like speed, but I also like some low speed stuff like a little trail running and climbing. So I was considering staying brushed but with a different motor, but still swapping out the electronics. It seems like this brushed motor has a little bit of grunt to it. I'm also looking at the Flysky FS-GT5 that comes with a receiver ( I need a good all around remote as I do have other RC cars, while 6 channels will be overkill, I like the overhead if I was to get something that would use those extra channels). I know that a higher turn motor will result in lower top end but more torque, and a lower KV rating. And a lower turn motor will result in a faster top end, but lower torque but higher KV. I'd like it to still be fast, but have torque as well (gearing plays a roll here as well). I don't really want to go with lipo, but if I absolutely have to I will have no choice (going to need a lipo fire bag and a fire proof box of some kind).

Hey what differential do you recommend for this car it's just that mine always strips out

Is there a specific name for a standard connector servo for this car and the common wltoys 12428 variants?

Just crashed my 144001 into a lamppost full speed the stock 550 motor just caved in on itself so I got the motor from my a959b (540 motor) and it goes faster just a little less torque

Anyone running a super stock bz? Would you get any performance increase or lose performance?

Okay what a cool channel ....I think ai will spend some time here .....:-)

Did you ever run this on 3S?

Try the stock esc with that motor or the stock motor of a979b the 540 motor...

I have that problem all the time when swapping motors or putting in bigger motors the shaft is too long I had the same problem when putting a 550 motor into the 1/10 torment all I did was take the RC motor outside to some nice smooth concrete and begin to grind away at the shaft it is made with such weak metal it just takes a few rubs or maybe even about 50 rubs on the concrete and shaft is is now shorter by rubbing it against the concrete

Cool Video 😎 What is fastet 6 or 13 Turn ? Thx

I drilled 3 small holes in the wing i believe it made it a bit faster

i just fried another esc...so i saw this surpass combo on bg... 44 mph is awesome on 2s...no need for 3s for me...did you ever try 3s with this bugger? i am thinking if it did not go up in flames and the tires rip off it would be 65 mph car! which is insane... thanks for sharing!

Oh, the surpass esc might be rated for crawlers... I think the way to program the other esc is by programming card. Also I wouldn't trust surpass hobbies electronic speed controllers.

How is the temperature of that motor?

Sir which is the best brushed motor for 14401??

I had the exact same esc in my 979b a couple months ago and it blew straight away, after applying throttle on 2s just to check it, didnt even run the car.. they obviously are junk

Lucky you still have a car left, could’ve been bad

1/14th scale buggy going 44mph on 2s...why use brushless?

How many turns is stock motor

how do know what version car you have

Also, what is the servo you used?

Can you do some giveaways please

hello grandpa.., what the meanings of 13t brushed? 13T meanings?

I would of been more inclined to notch the cover. It's not as if it's gona leak out all the gear oil.

Like this,192

Sorry, In the 144001