Wolf Jaw tongs! Greatest tongs for a beginner Blacksmith! Remake!

No video

Wolf Jaw tongs! Greatest tongs for a beginner Blacksmith! Remake!

Рет қаралды 34,795

5 жыл бұрын

I will be going over how to forge this type of tong in this video in some detail. I will be making the wolf jaws as part of a series I made some time. let me know in the comments what tool I should make next as the greatest tool for a beginner blacksmith!
I hope you enjoy!
I hope you enjoy!
Etsy Store
www.etsy.com/uk/shop/MossCoCraft
Email for Hammers!
industrialartstudios@gmail.com
Website
www.iastudios.co.uk/
Patreon
/ trustmeimablacksmith
Instagram
/ iastudios_dan

Пікірлер: 117

@starship3095 2 жыл бұрын

Love that he shows standard and metric dimensions!

@rabenwald1 5 жыл бұрын

Nice Job! My vote for Beginner tools is Scrolling fork and twisting wrench.

@johngullotti 5 жыл бұрын

Thank you very much. Nicely done.

@grandadz_forge 5 жыл бұрын

Excellent tongs! Center punch/hole punch is important. Hot cut.

@gurvinderkau1e5w18 5 жыл бұрын

Nice set of tongs

@philmenzies2477 5 жыл бұрын

I like the follow up, close in shot, from a different angle, that shows a technique again. A couple of times I was taking note of times and technique, ready to ask "what, why, how" and your follow up angle explained it perfectly.

@drason69 5 жыл бұрын

Good or bad, they work! Am I a master tong smith, NO. But glad you put this out here. Great work Dan👍👍👍👍

@tyleranderson8751 5 жыл бұрын

Looking good like always good sir

@bunyaminaltinok9252 3 жыл бұрын

Great job, thanks for sharing with us.

@danielmoss2089 3 жыл бұрын

Thanks for watching!

@20mcarroll02 5 жыл бұрын

Very nice.

@FSAM2132 4 жыл бұрын

Nice tongs & a definite addition to my reference material for making my own..thanks.

@stevenlarsen1691 2 жыл бұрын

Great job! Thank you for sharing.

@danielmoss2089 2 жыл бұрын

Thanks for watching!

@rlm98253 3 жыл бұрын

Excellent instructional video. Thanks.

@javanbybee4822 4 жыл бұрын

That’s a nice Kohlswa you got there

@TheRowdyJ 4 жыл бұрын

outstanding! thumbs up from the states.

@stevenlarsen1691 2 жыл бұрын

I would like to see you make a chain link and a swivel chain link. A dating candle would be good to make.

@danielmoss2089 2 жыл бұрын

ill see what I can do. IM make a swivel chain link thing in the toilethawk video. little bit of light humour.

@stanervin6108 5 жыл бұрын

I can think of several beginner's tools. Hold down tool for the hardie Scribe for marking stock Master scroll form Rivet header and set Any bottom tooling for hardie

@1917Enfield 5 жыл бұрын

A good hold down. Box jaw tongs. Bolt tongs. Guillotine tool. Spring fuller. Butcher tool. Cone mandrel. Bending forks. I could go on, but I think that's plenty.

@KevinBerisso 5 жыл бұрын

Great job... punches, drifts, rivet tools would be great...

@Brian-bn3qp 5 жыл бұрын

I recently started blacksmithing, and the first thing I found myself really wishing I had was a hot cut hardy.

@chrislawrence6015 5 жыл бұрын

And best tool for me as always on my own is a hold down as things fly everywhere 😃

@Channelcatchamp204 5 жыл бұрын

Well done

@hannemannironworks1651 5 жыл бұрын

Teach us how to make a riveting set please. Great video dan!

@stuartschuetze3774 5 жыл бұрын

I like the format of this video. Showing the forging from two different angles. Well done. A nice pair of tongs too.

@davidlong3824 4 жыл бұрын

Work of art fantastic.

@aussiebushcraft5565 4 жыл бұрын

Nice tongs , big rivet , even the name is cool “ Wolf Tongs “. Will attemp but need to be an octopus ,working as one man :)

@tobyjo57 5 жыл бұрын

Brilliant Tounges Dan thanks for sharing your skill with us

@RayFromTheHayclan 5 жыл бұрын

What I liked most about this project was a fact that you forged the bar down to the thickness of the boss then did the rains set down after. On my next set of tongs I'm going to try that technique myself

@danielmoss2089 5 жыл бұрын

It's some thing I do when using the power hammer and it's sort of stuck lol. Thanks for the great comment.

@williamcunha9136 5 жыл бұрын

Beautiful Work Dan!

@luukderksen8810 5 жыл бұрын

A little progress? There beautiful!

@mtyson9004 5 жыл бұрын

Nice work! They look awesome! Thanks Dan!

@BigWillSD 5 жыл бұрын

Wow!! Awesome video!! Those are great tongs!! When you were punching the eye I thought, wow doesn't that heat up his hand? Next clip, glove.... LMBO, answered my question.

@danielmoss2089 5 жыл бұрын

Sure does and I stuck it out for the first part and was like glove!! Thanks for the great comment.

@brettsayers7768 5 жыл бұрын

Fantastic tongs, they look great. Everyone needs a set of these.

@jayrenz111 5 жыл бұрын

Great job Daniel. Awesome work.

@traceymoss6513 5 жыл бұрын

Lovely set of tongs Dan great work as always x

@Frie_Jemi 5 жыл бұрын

the BEST TOOL for blacksmiths, beginner or not, is easy to make and very versatile, it's the hardy mounted guillotine tool!

@MatthewRulla 5 жыл бұрын

I like your presentation style and would appreciate if you would could share new videos on shop made: punches, drifts, rivett headers, swage blocks, fullers, etc

@mitchelperkins6723 5 жыл бұрын

Nice set of tongs. As another beginer tool a Hardy hot cut would be a good demo. Also a top and bottom fuller set. Cheers Daniel!

@georgegriffiths2235 5 жыл бұрын

Nice job as always Dan my order from the Etsy arrived I can now fix my hammer and the brush is great 👍

@BrianDaleNeeley 5 жыл бұрын

I would like to say a 500 # Massey power hammer, but I don't think that will get you to build one! Honestly, after the hammer, anvil, & vise, you need the tools to make a set of tongs. So, a punch & drift (although you can use the punch to drift with), and a chisel. Those would be the bare basics. With those tools, you can begin to make all the other tools necessary to start making your own tools (hammer eye drift, more punches & drifts, the continually growing pile of tongs, hardy tools, etc). It's really difficult to make more tools without at least one pair of tongs, a punch, and a chisel. Once those basic tools are available, you can make more of them, but those would be the absolute bare minimum tools.

@odinallfather4560 5 жыл бұрын

great video Daniel Moss

@mickr5584 5 жыл бұрын

Great looking tongs! Good tutorial as well. I think your bending fork, a hold down, a hot cut hardy, and a drift are pretty great tools for beginners to have. I always look forward to your videos. Thank you very much for your hard work.

@bentoombs 5 жыл бұрын

Nice tongs and video quality. Greatest beginner tool, a hold down tool(many types) I think should one. Thanks dude👍👍 ⚒ on!!

@charminghollowforge1109 5 жыл бұрын

Cool video I’ll be referencing this again as I’m making two or more pairs soon. I like that you involve team striking regularly in your videos as well.keep u the great work bud🔥⚒🔥⚒🍻

@larryking606 5 жыл бұрын

Sir Daniel , That was great anvil work and Hammer work ! Taking the inspiration from others is a good thing, and applying your own skills to a benefit is AWESOME ! I will be checking out your Channel for more ! Great Video ! Keep up the great work ! Keep Hammering !

@damianmcneely7884 5 жыл бұрын

Really great video Dan, really clear instructions and once i get my forge sorted - going with a box of dirt, i'm going to have a go with these. Cheers!

@mikedavis5886 5 жыл бұрын

Hand held hot cut :-)

@jamescopeland5358 2 жыл бұрын

Thank you !

@christopherharrylang7424 5 жыл бұрын

Big improvement in video quality and great pair if tongs too. My first ever forging was a coal rake for the forge, been blacksmithing as a hobby now for 2 years and still use that rake. Thanks for the video.

@thomaszipperer2766 5 жыл бұрын

same

@Eaves1979 5 жыл бұрын

Great video love the new style. And the camera seems like a big upgrade video quality is much improved. To ya look good, look forward to the next video👍🏻

@dadratsforge 5 жыл бұрын

Terrific video dude. I like this approach to making the content. You may want to take a look at the sound levels, with the equipment you have now you appear to be shouting at us. Previously you needed to do that for clarity but no longer, I'd say. Beginner Blacksmith greatest tool? Patience..... not quite sure how you can "make" that, but maybe inspire it somehow?

@trevorjarvis3021 5 жыл бұрын

Great video as always Dan, fantastic quality of both the filming and the making of the tongs!!

@danielmoss2089 5 жыл бұрын

Thanks dude means a lot.

@techronmattic5876 5 жыл бұрын

Those tongs look awesome Dan, well done, most usefull tool for smithing apart from the obvious 3 would have to be a vice, i can't think of a single project i have made that has not been in it, so on that idea as others have mentioned how about a hardy hold down

@hassanabrahimabdullaha7454 4 жыл бұрын

Hi Dan good job

@opendstudio7141 5 жыл бұрын

The greatest beginner blacksmith tool currently is KZfaq and a fat bank account. :)

@ogi22 4 жыл бұрын

Actually just a KZfaq, a bit of space and a lot of willingness/desire. I started to carve spoons a couple years ago. Bought only a cheap Mora hook knife and a folding saw at the supermarket. Made my own straight knives out of old files. Made one hook knife with a little anvil nailed to a block of wood, using an old chisel. Used my fireplace for central heating as a forge;) Now i'm making my own propane forge and all i had to buy was some pipes for a burner so far. And a bit of refractory powder i will mix with a sand and plaster. Really, it takes much more willingness and effort than money:) And some inspirations from guys like Daniel, Trobjorn, Alex Steel and a lot of other wonderful blacksmiths here. Bertram's channel can be an amazing inspiration. He made a viking style movable "forge" that you can fit in a small bag. If you really want, you can start forging with a bit of charcoal, some mud and stones, some tongs to grab a hot metal (i used old, dull cutters) and any hammer :D

@jefffarley9223 5 жыл бұрын

Poz tongs and patience. Good luck making that one lol

@danielmoss2089 5 жыл бұрын

I think I have a draw of patience on an old blacksmith book somewhere. Tell ya what just give me a minute to find it and I'll get back to you! Great comment and poz Tongs is a good idea.

@stustudy2475 5 жыл бұрын

Hey man. Have been to busy to watch lately, but I enjoyed the video. Grats on the upgrades man.

@danielmoss2089 5 жыл бұрын

Hay dude pleasure having you here. Thank you for the great comment

@stustudy2475 5 жыл бұрын

@@danielmoss2089 no prob man. Great to see you doing well.

@ianlowe4666 5 жыл бұрын

Compared to the ones you showed alongside these Dan I'd say you've made a pretty decent jump in quality. The tongs you've made here would be my pick for the best tool for a beginner to make. Hammers are easily bought, chisels and punches too, but tongs aren't something you can just pull off a shelf. The wolf jaw style, along with the slight goose neck in the nibs means these can be hot adjusted (if needs be) to a pretty wide range of stock sizes. Perfect for a beginner, make one pair and then get on with learning.

@danielmoss2089 5 жыл бұрын

Thanks Ian means a lot. hope your well and great comment.

@ianlowe4666 5 жыл бұрын

@@danielmoss2089 Just calling what I see mate :D If they were crap I'd be ribbing you over them. I'm still upright, thanks for the asking, but am getting over a quite serious illness at the start of the year. Just at the point where I've gotten back into the shop for a day or two. Long boring story ;)

@laparfitt 5 жыл бұрын

Centre dot punch :o

@chrislawrence6015 5 жыл бұрын

Great vid I like the new look and feel but still like the chatty ones it helps explain what's going On, what is your punch made out of as still need one ?

@troytreeguy 5 жыл бұрын

Beautiful work Dan! I think that besides the basics you noted, fullering tools that can be used by one person are extremely handy! Also some folks have mentioned a hold down and as an amateur I use mine all the time, made it from a reused lug wrench which had a decent steel. Be Well

@louislarose4023 5 жыл бұрын

Great Tongs ! For a real challenge how about making a hot rasp ?

@danielmoss2089 5 жыл бұрын

Was thinking about making a rasp a while back.

@bret354 5 жыл бұрын

cleanest looking tongs I've seen. I do wonder how heavy they are?

@ericanderson2400 4 жыл бұрын

Fantastic videos and craftsmanship. Some of the best I’ve seen. I’m curious about what you rubbed the rings with at the end to blacken them. I know each smithy has their own preferences. Just wondering what you use.

@beammeupscotty1955 5 жыл бұрын

Roubo style holdfast.

@Hamgravy1633 5 жыл бұрын

Please show us how to make some punches or chisels to use in the tong making

@mattwyeth3156 2 жыл бұрын

Great looking tongs why such a large rivit

@danielmoss2089 2 жыл бұрын

Rivet diameter should be about the same as the hinge plate thick Ness. I am for 10mm hinge plates so the diameter of the starting stock is about 10mm.

@balsamforge4741 5 жыл бұрын

Need to get a good stricking buddy 😁

@Watchfuliz 2 жыл бұрын

Late to the party I know..great video. I would be interested in knowing the size of the 1 9/16" nib after hammering?

@salehikhosrow7762 3 жыл бұрын

These tongs are best I have seen Can I buy a set of them pls?

@Blou55 3 жыл бұрын

Nice tutorial and great video. I'm always checking what you did new for me to wach. You make your tongs from 3/4 in by 3/4 in stock... my question... Why dont you use 1/2 in by 1 in flat bar? Thanks and i follow you.

@Big222Dog 4 жыл бұрын

Could you please make a axe drift & name the steel. Thanks. Hugo

@jayrenz111 5 жыл бұрын

Next project could be box jaw tongs.

@Big222Dog 5 жыл бұрын

Daniel, good video. I have a rudimentary question. Would you explain the difference between coke & coal. When people say they are using coal, are they talking about house fire coal? If coal has to be transformed into coke what is it that actually takes place in that transition? Is 1 better than the other? I know this is very basic but somewhere in my learning I have missed this part.

@mattwyeth3156 2 жыл бұрын

Is the hot wax finish just wax and what type of wax do you use

@tonywinton7949 4 жыл бұрын

As a novice and new to blacksmithing, I Love your work. What is the press you use in this video called?

@patrickpitz1879 5 жыл бұрын

They should probably be lighter, since you're going to be holding them for long stretches of time, you have plenty of meat on the handles

@20mcarroll02 5 жыл бұрын

Make a hot cut hardy.

@danielmoss2089 5 жыл бұрын

I have a video on this I'm sure you will like.

@hassanabrahimabdullaha7454 4 жыл бұрын

Here like to declare you that all kind of tongs we supplied in your country and brands resell these

@mattwyeth3156 4 жыл бұрын

Do the rains need to be that thick with this type of tongs or are they for use under a power hammer they are a nice set of tongs

@mattwyeth3156 2 жыл бұрын

Thanks dan its just hard to see proper demotions when not in person do you build the tongs for the pin diameter or finger out the pin demotions when the tongs are in the final stages of construction

@newtsleatherandmetalsmithy1827 5 жыл бұрын

Dan are you gonna sell the parallel jaw tongs that you made based off of Alex's design ( valhalla forge )

@danielmoss2089 5 жыл бұрын

Would you like a set? I'm not sure I will be as they would be very expensive and not that practical.

@newtsleatherandmetalsmithy1827 5 жыл бұрын

Just a diagram for myself with very precise measurements but a friend of mine is interested in them

@stantilton2191 3 жыл бұрын

Why is your anvil low?

@jmbstudio6873 4 жыл бұрын

What is stricking? That is a lot of hammering for tongs. Most beginners don't know a master smith to strike for them and also would, or should not allow their beginner friend to swing a 10 lb sledge over there anvil. I would suggest a striking anvil shaped object for that, or you will lose chunks of your hardened plate when your friend misses strikes. There are several super simple ways of making them until one learns how to manipulate material. Just take some 1/2" square or round. Cut it at 12 inches, upset 2 inches at the end until the stock is 11 inches. A lot of peeps use 5/8 or 3/4 stock. I don't like to spend a half hour drawing out reins so I start with smaller material. Remember most beginners work alone. Forge On!!!

@adriannavarro263 2 жыл бұрын

Hello dear--I would like to purchase a set I a, I’m Orlando Florida USA-- llet ,r know now u van order it%%% thank you

@Frie_Jemi 5 жыл бұрын

did you make them right or left handed?

@danielmoss2089 5 жыл бұрын

The reins are Centered and have no index. You can uses the left or right hand. I make all my Tongs like this. That's what I was doing with the bending forks in the vise. Good question hope that helps.

@danielmoss2089 5 жыл бұрын

Centring reins isn't common on most hand forged Tongs as it's a little time consuming. But they sit ace in the hand.

@Frie_Jemi 5 жыл бұрын

@@danielmoss2089 i asked because the only time it was explained was black bear forge, if the top jaw was also the left side of the boss they want to fall to the left, or INTO the left hand, for a 'righty' with the hammer...and so forth, have you heard of anything like this?

@danielmoss2089 5 жыл бұрын

I was always tought it was which way you do the second Set down. I turn into my body witch makes a set of Tongs for a left hand. I've seen John's video on this subject and can't disagree. But leaving the Tongs hand can cause you to Forge out of square. Hence why I center them also any one can uses them. I also uses a power hammer daily and this means I hold Tongs in my hammer hand and top tools in my left. Hand Tongs just don't work for me.

@Frie_Jemi 5 жыл бұрын

@@danielmoss2089 i do appreciate the clarification there, thx! that makes sense

@Frie_Jemi 5 жыл бұрын

hate to spellcheck, but what is stricking? I think you meant S T R I K I N G.

@danielmoss2089 5 жыл бұрын

Thanks very dyslexic and I knew one would slip thought lol.

@Br1cht 5 жыл бұрын

Honestly I don´t find it educational/amusing when people use the power hammer, I mean the thing with YT vids are to showcase skill IMHO. You´re pretty knifty with that power hammer though;)

@danielmoss2089 5 жыл бұрын

Not sure I used a power hammer in this video!