Wood Turning - Coca-Cola
Рет қаралды 25,309
3 жыл бұрынDoing this bowl wasn't as easy as I thought it would be.
More down here ↓↓↓ Click SHOW MORE!
Thanks to Total Boat - www.totalboat.com
Use Code Moonpie15 for 15% off (one time use)
Thanks to Starbond - www.starbond.com/?rfsn=308130...
Use Code MPC10 for 10% off
Thanks to Ack's Wood Paste - ackswoodpaste.com/
Use Code MPC10 for 10% off
Lets Resin - letsresin.com/?ref=lh2wozftr3y
Use Code Resin5 for 5% off
Where can you find me?
Find my Facebook Page / moonpiecreations1
Find my Instagram / moonpie_creations
Find my Twitter / mpc_ken
Find me at my Webpage MoonpieCreations.com
Products I Use:
General Tools MMD4E Digital Moisture Meter - amzn.to/2ZQnuui
amzn.to/2MVp6Ro
Pinnacle Cryogenic Fingernail Grind Bowl Gouge 1/2" - amzn.to/2WEl2G5
Pinnacle Cryogenic Fingernail Grind Bowl Gouge 3/8" - amzn.to/2VcxyfD
NOVA SuperNOVA2 23055 Wood Turning Chuck Insert Type - amzn.to/2UpTYgj
NOVA G3 Chuck Without Threaded Insert - amzn.to/2UiuRgs
PSI Woodworking LA11418 Headstock Spindle Adaptor (1 ¼” to 1” x 8TPI) - amzn.to/2FPv6pb
6” Quick Release Bar Clamps - amzn.to/2FK2TQt
Laguna Tools MLAREVO 1836 Revo Lathe, 18"/36", Black - amzn.to/2UewHPa
AdTech W9201 Drip-Less Full Size High Temp Hot Glue Gun - amzn.to/2uIqcoJ
Aluminum Honeycomb Grid Core, 1/4" Cell, 12"x16"x 1.00" - amzn.to/2HTMHjc
Jacquard Pearl Ex Powder Pigments - amzn.to/2HVf14q
Craftsman 9-36857 3 Piece Wood Chisel Set With 3 Blades - amzn.to/2HWf9AI
Woodpeckers Ultra-Shear Wood Lathe Chisel Set, Full Size - amzn.to/2OFIWyh
1/32"- 5/8" Self-tightening Keyless Lathe Drill Chuck W/ MT #3 - amzn.to/2I9v0eS
NOVA Cole Jaw Set 10” - amzn.to/2uEktjP
Easy Wood Tools 4 1/2” Diameter x 1-1/4” x 8 TPI - amzn.to/2FMc9Uh
Yorkshire Grit and Hampshire Sheen www.thewalnutlog.com/
Easy Wood Tools Full Size Easy Rougher - amzn.to/2WHErpC
Cellulose Sanding Sealer - amzn.to/2HU61g3
Combination Square 12 In - amzn.to/2V9hhvi
* Some links may be affiliate or sponsor links. Purchasing or even clicking through these links will help support me and the content I provide for free. Thank you very much for your support!
#resinturning #Resin #woodturning
DISCLAIMER: Please note that my channel is for entertainment purposes only. Don’t be stupid. You should NOT rely solely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner or electrician and working with machinery and electricity can be dangerous. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
@katonhellenthal576 3 жыл бұрын
First comment 😁
@MoonpieCreations 3 жыл бұрын
YASSSSS!!!!!!!!
@robertbalmer3670 3 жыл бұрын
@@MoonpieCreations cool
@scottpeterson5913 3 жыл бұрын
The one who never makes a mistake is the one who doesn’t do anything, nor challenges themselves. Nicely done. Ya got another subscriber.
@MoonpieCreations 3 жыл бұрын
Thanks Scott, I appreciate you watching and commenting.
@penny_the_wiser413 2 жыл бұрын
That wood is beautiful
@jeffweese4551 3 жыл бұрын
Best comment ever "I can't wait to see who unsubscribes because I used this with resin"...thanks for sharing, amazing stuff.
@MoonpieCreations 3 жыл бұрын
Hahahaha, when I did the Tribble bowl a guys got real made because it was a native wood from his home and I used resin on it. lol Happens all the time.
@debbielove5993 3 жыл бұрын
Seriously, people can be so petty and self absorbed.🙄
@jencstephens5452 3 жыл бұрын
If everything we tried turned out perfect, there would be no joy with a job well done. Many of the more creative things are trial and error, and while it's no fun when things don't work out, it is helpful that you share them. Little chance of getting something figured out if we all make the same mistakes, rather than learning from others. You make amazing art, and are a helpful teacher.
@MoonpieCreations 3 жыл бұрын
Wow! Jen thank you for that.
@curtisbancroft4070 3 жыл бұрын
Love your videos because your not afraid to show mistakes along the way so many of them out there don't show or want to admit we all make mistakes especially when trying something new or different. Cool Job man
@MoonpieCreations 3 жыл бұрын
Thank you Curtis.
@daveb.misc.2589 3 жыл бұрын
Loved it. The wood, the RESIN with the wood, the coke caps, the mistakes. All of it. Had a boss once who's philosophy was "the person who doesnt mess up aint doin anything". It came out really nice. Im sure the customer will display it proudly. Stay cool yourself!
@MoonpieCreations 3 жыл бұрын
Thanks Dave. So if you look back at some of my old videos me saying stay cool comes from me being in a shop with no a/c lol it would get hot. lol
@daveb.misc.2589 3 жыл бұрын
@@MoonpieCreations lol. Stayin cool in my "shop" means havin the roll-up door open, and a harbor freight fan blowin! Or, anytime in the winter!
@oldguyzwoodshop6962 3 жыл бұрын
It looks good...nobody will notice any imperfections but you! Lol! Nice job!
@MoonpieCreations 3 жыл бұрын
😊 thank you.
@annetteackley9048 3 жыл бұрын
I love the old coke machine. Never saw one like it before. Great way to use up bottle caps!!!
@MoonpieCreations 3 жыл бұрын
Thanks. It was my grandparents. 1944 Vendomatic.
@Muskrat1960 3 жыл бұрын
Turned out great. Walnut is beautiful piece of wood. Love your old coke machine.
@MoonpieCreations 3 жыл бұрын
Thanks Bruce. It sat in my Grandmothers Beauty shop and my Grandfather Screen Door Shop. I remember getting drinks from it when I was a wee lad.
@jnol9009 3 жыл бұрын
I thought it came out great. And I love the old Coke machine! Great job and thx for sharing.
@MoonpieCreations 3 жыл бұрын
Thanks. That Machine sat in my grandmothers beauty salon and them my grandfathers screen door shop since it was new. Sat on my Aunts back porch for 17 years unplugs and unused until I was able to ship it to me. I plugged it in and it worked perfect. Go figure.
@jnol9009 3 жыл бұрын
@@MoonpieCreations That is so cool!
@onlyhuman1954 3 жыл бұрын
Love this. You're an amazing visual artist as well as a top class turner ... But, I can only watch and admire. And knit. I can knit... 😁 And write. 👍
@MoonpieCreations 3 жыл бұрын
Thank you! 😊
@tonyisham9396 3 жыл бұрын
Nice save bud. Real men never give up
@MoonpieCreations 3 жыл бұрын
Thanks Tony.
@GLASSGHOSTHUNTERS 3 жыл бұрын
I actually liked how it turned out.
@GordonRock1 3 жыл бұрын
I’m a Coke fan and I really like how you did this! That is an awesome Coke machine you have there! They are hard as hell to find here in Canada and very expensive. Great job on that bowl, my friend. Anybody who unsubscribes because you used resin with the walnut is a moron. Your wood, your choice. Great job!! 👍👍👍👍
@MoonpieCreations 3 жыл бұрын
Thanks Gord. Did you ever get that sticker I sent? I had three other people tell me they didn't get it. They all went out the same day. If not hit me up with your address again so I can get it out.
@GordonRock1 3 жыл бұрын
Moonpie Creations Yes, I got it. Whenever I start a video with my ‘virtual’ wall (not every video) it’s on there. Take care, .....Gord
@kristalaurila389 2 жыл бұрын
Another Coke fan here! In my house, this would have been in the middle of dining table, allways 😀 Beautiful bowl ❤️
@augusthawks6576 2 жыл бұрын
It's been a looooong time since I've used a lathe. Now that I'm retired I'm thinking about getting back into it. Seeing you have problems and fixing them instead of starting over gives me hope. Great stuff.
@MoonpieCreations 2 жыл бұрын
Go for it!
@ericbrown1907 3 жыл бұрын
The wood grain is awesome small imperfections give it character for the challenges it gave you still turned out pretty cool
@MoonpieCreations 3 жыл бұрын
Thanks Eric. Customer loved it.
@williamellis8993 3 жыл бұрын
Still looks great, Ken. Always a thumbs up for you and never unsubscribe! Do you ever wonder how many people watch just to see you "mess" up? Take care. Bill
@MoonpieCreations 3 жыл бұрын
My buddy Tom swears I manufacture the mistakes. lol I told him I'm not sure I could do this stuff on purpose.
@CrossCutCreations 3 жыл бұрын
That's a good looking bowl. I like the concept for sure.
@MoonpieCreations 3 жыл бұрын
Thanks 👍 I appreciate the view and comment Robert.
@deetanner7153 3 жыл бұрын
there are no mistakes...just further possibilities...love your videos...keep up the good work...💜
@MoonpieCreations 3 жыл бұрын
😊 thank you
@recnutz8073 3 жыл бұрын
Showing difficulties provides good video content as well, since we learn from it... and hey, your resin, our benefit. 👊 Gratitude.
@MoonpieCreations 3 жыл бұрын
Thanks 👍
@WoodysWoodShop 3 жыл бұрын
I think it came out awesome! That would make a cool bowl for a home bar or something like that.
@MoonpieCreations 3 жыл бұрын
That would be cool. Thanks.
@davedavem 3 жыл бұрын
I can't believe you used that beautiful wood with resin... Subscribed! 😜
@MoonpieCreations 3 жыл бұрын
Hahahahahha, when I did a Tribble bowl I had someone get mad because the wood I used was ta beautiful wood native to their country. Bahahaha.
@davedavem 3 жыл бұрын
@@MoonpieCreations hahahaha awesome
@TheKitchenNinja 3 жыл бұрын
We learn more from our failures that our successes. I enjoyed this one. It was a cool concept! I think my favourite touch was the band of black resin underneath the coke caps.
@MoonpieCreations 3 жыл бұрын
Thank you
@bryanbard1840 3 жыл бұрын
"Don't be a douche about it", LOL. Awesome line and the bowl turned out nice too!
@MoonpieCreations 3 жыл бұрын
Thanks Bryan.
@bernadinewhitworth4262 3 жыл бұрын
I like it ! Your very creative !
@laceylemmons677 3 жыл бұрын
Looks great!
@MoonpieCreations 3 жыл бұрын
Thank you Lacey
@debbielove5993 3 жыл бұрын
Love the bowl and I totally would use the cap ring you had to cut off! That walnut is just gorgeous wood! 😊👍
@TheKjoy85 3 жыл бұрын
My aunt would have loved this bowl. She loved all things Coca-Cola.
@MoonpieCreations 3 жыл бұрын
The customer loved both of them.
@darrenfreeman7753 3 жыл бұрын
Awesome bowl and additude
@maddieadams75 3 жыл бұрын
Turned out great, wood grain is beautiful ❤️
@MoonpieCreations 3 жыл бұрын
Thank you very much!
@katonhellenthal576 3 жыл бұрын
Dude that's awesome!!!
@MoonpieCreations 3 жыл бұрын
Glad you think so!
@WolfRidgeWoodworking 3 жыл бұрын
Very cool idea Ken! - Ed
@MoonpieCreations 3 жыл бұрын
Thanks Ed.
@JordanWoodwerx 3 жыл бұрын
Looks awesome Ken!
@MoonpieCreations 3 жыл бұрын
Thanks 👍
@lisakuhnel1449 3 жыл бұрын
You have WAY more patience than I'd have had!
@MoonpieCreations 3 жыл бұрын
I don;t know about that. I have thrown many things a cross the shop. bahahaha
@DeereGuy211 3 жыл бұрын
Brother you are getting way to good with the "saves". Thanks as always for sharing!!
@MoonpieCreations 3 жыл бұрын
Practice makes perfect.......bahahahhahhaha that's a sad statement in this case.
@vickiejenkinson2468 3 жыл бұрын
I actually prefer imperfect things. Good save! I really like this bowl a lot. At least you didn't have to take it out back and shoot it hahaha
@MoonpieCreations 3 жыл бұрын
Hahahhaa, very true. Thanks.
@Lee-qp6gf 3 жыл бұрын
Good save and a good turn.
@MoonpieCreations 3 жыл бұрын
Thanks Lee
@richardlaney2047 3 жыл бұрын
Looks great.
@MoonpieCreations 3 жыл бұрын
Thanks!
@KLU421 3 жыл бұрын
I think it came out great! Awesome idea and looks fantastic.😊
@MoonpieCreations 3 жыл бұрын
Thanks so much! 😊
@rogerskimberlyg444 3 жыл бұрын
It looks great
@MoonpieCreations 3 жыл бұрын
Thank you.
@idrwoodturning2074 3 жыл бұрын
great video, what you see is what you get.brilliant
@MoonpieCreations 3 жыл бұрын
Glad you enjoyed it. Thank you for watching and commenting.
@Thumper1968 3 жыл бұрын
Love your channel man. Great projects and a laid back attitude. Good stuff!
@MoonpieCreations 3 жыл бұрын
I appreciate that! Thank you.
@CFGossettAbbasHealingArts 3 жыл бұрын
Love the bowl. Good fix on the oopsies. I like the bubbles. It gives the bowl character. Love it dude!
@MoonpieCreations 3 жыл бұрын
Glad you like it. The customer really liked it too.
@pettigrewwoodworks 3 жыл бұрын
Entertaining effort! Actually turned out pretty nice.
@MoonpieCreations 3 жыл бұрын
Thank you. Just got word from the customer. They loved both bowls.
@joallawestervelt6918 3 жыл бұрын
That is so awesome. Very unique. ♥😺♥
@MoonpieCreations 3 жыл бұрын
Thank you! 😊
@susanward5360 3 жыл бұрын
That is still a beautiful bowl , loved the wood.
@MoonpieCreations 3 жыл бұрын
Thank you very much! It did have some incredible grain.
@pennymartin3821 2 жыл бұрын
You may think that they are mess ups or screw ups, but they are not, they add character to the project, great job. I love 💘 your bowl, I wouldn't change a thing in my opinion. Thanks 😊
@MoonpieCreations 2 жыл бұрын
Thank you! 😊
@Cam-ns1yi 3 жыл бұрын
I think it's awesome... great job
@MoonpieCreations 3 жыл бұрын
Thanks Donnie
@stevewhite8161 3 жыл бұрын
I think it's cool. Very challenging but cool outcome.
@MoonpieCreations 3 жыл бұрын
Thank you Steve.
@karlawenzel5040 3 жыл бұрын
Cool Idea! I collect coke stuff. That was cool!!
@MoonpieCreations 3 жыл бұрын
My Cousin does also. I think she made at me for not giving this to her. lol
@richardslade1337 3 жыл бұрын
I still think it turned out nice even with the bubbles. I like that you still show when things didn't go the way you want them to. Shows that you're trying new things. 👍
@MoonpieCreations 3 жыл бұрын
Thank you! 😊
@pamrosina 3 жыл бұрын
It's beautiful 😍
@MoonpieCreations 3 жыл бұрын
Thank you! 😊
@SteveC38 3 жыл бұрын
Those little cups make for pretty good Jello Shots too😁 I love it Ken! Nice job Brother👍
@MoonpieCreations 3 жыл бұрын
I like where your heads at Steve.
@shaunfelton2046 3 жыл бұрын
Still a quality piece! I like it.
@MoonpieCreations 3 жыл бұрын
Thanks Shaun. Customer contacted me yesterday, they are very happy with both.
@BenNawrath 3 жыл бұрын
Great recovery! I thought the only way to recover would be to glue them individually to the inside of the ring to leave a gap. I like how you did it.
@MoonpieCreations 3 жыл бұрын
Thanks Ben. I should have done the 1/8" gap to start off with. The wobble was caused by me getting a catch when turning the recess. Then I figured out my chuck jaws were in the wrong place. Go figure.
@BenNawrath 3 жыл бұрын
Moonpie Creations I have such bad luck having things stay concentric when I flip them around... probably has to do with my lathe being 80 yrs old! I got to use my friend’s one-way recently, amazing machine... but yeah that 1/8 gap hindsight thing... how could you know?
@russcarter4068 3 жыл бұрын
Awesome~~~
@MoonpieCreations 3 жыл бұрын
Thank you! Cheers!
@Yosenku 3 жыл бұрын
i love it
@MoonpieCreations 3 жыл бұрын
Thank you
@greerturner5925 Жыл бұрын
I like it!!!
@MoonpieCreations Жыл бұрын
Thanks
@islandcharlie7132 3 жыл бұрын
That turned out really cool. Just need some Jack with that Coke.
@MoonpieCreations 3 жыл бұрын
I'm a Jim Beam Type of guy but yes!!!!!!!!! lol
@pattiauburn9109 2 жыл бұрын
@@MoonpieCreations Ha! Jim Beam is my best friend!
@simonrourke9817 3 жыл бұрын
Great looking bowl. Pity about the first attempt. Good fix. 👍
@MoonpieCreations 3 жыл бұрын
Thank you! Cheers!
@MikeT 3 жыл бұрын
I was wondering what the big box of coke caps was for a few videos ago. Love that grain
@MoonpieCreations 3 жыл бұрын
Hahaha, I always put something in about upcoming videos.
@WoodenItBeNice 3 жыл бұрын
Hi Ken, I'm sitting on the fence on this one. I can't make my mind up. I have given a thumbs up for it though. The Walnut is beautiful. Take care Ken. cheers, Huw
@MoonpieCreations 3 жыл бұрын
Right on. Sometimes a project will strike you as cool or sometimes you'll be "Boy I kinda like it, but there is something off" Just let it wash over you for a bit. 😜
@stephanietruly3447 3 жыл бұрын
Have a Coke and a smile lol... looks great Ken
@MoonpieCreations 3 жыл бұрын
Thank you.
@chrisgiftshop3127 2 жыл бұрын
I drink a lot of soda and am working on upcycling them into HDPE sheets. I love the idea of putting them in a bowl. I did hate seeing that walnut go to waste, but still love the bowl.
@MoonpieCreations 2 жыл бұрын
I really wish I could afford a bowl saver. But until then I will have to hog bowls out.
@chrisgiftshop3127 2 жыл бұрын
@@MoonpieCreations FACTS! Same here. Came close to ordering one and realized there was another part to it which doubled if not almost tripled the price. I did find a nice stabilizer thought, so that helps with longer hollow vessels.
@donaldtrabeaux5235 3 жыл бұрын
Ok dude at first I thought dam he mess this up then you never gave up and it is stunning we see you next week take care stay safe god bless
@MoonpieCreations 3 жыл бұрын
Thanks 👍 You know I don't give up to easy. But I still have that shelf of shame in the background. lol
@unclemoe5733 3 жыл бұрын
Nice save/recovery. I think it looks pretty good concidering the flaws. Could you have drilled to the bubbles and injected resin? Just a tip to concider-when you shape the bottom, remove about 1/16" deeper of the outer edge about an inch or so from the sides. This will give your bowls a looks that makes them look as is their floating on a table.
@MoonpieCreations 3 жыл бұрын
Yes I could have injected the bubbles, but I felt it would have been to much work....well because they still looked good. Great tip by the way. Thanks.
@apismellifera1000 3 жыл бұрын
Now you should use pepsi, Mtn dew and dr pepper caps next. I have always wanted to see a turning use soda bottle caps. This is a really beautiful and unique bowl and don't let the negativity get you down. I have had my fair share of screw ups as well
@MoonpieCreations 3 жыл бұрын
I have been toying with a metal Corona beer cap bowl. One of my subscribers had an idea for it and contacted me. I may try it soon. Thanks.
@apismellifera1000 3 жыл бұрын
@@MoonpieCreations Be careful at the corona beer bottle caps are steel and you will need carbide tipped scrapers
@MoonpieCreations 3 жыл бұрын
@@apismellifera1000 won’t be cutting into them. Thanks.
@kcox1980 3 жыл бұрын
You missed an incredible opportunity by not using coccobolo wood for a Coca-Cola bowl
@MoonpieCreations 3 жыл бұрын
lol, true but do you know how much a coccobolo blanks that size costs? ugh not for what I charge. lol
@cookiescoop6065 3 жыл бұрын
Heck yea trouble no biggie it still looks good 👍👊👊
@MoonpieCreations 3 жыл бұрын
Thanks. The customer loved it.
@sanmicol 3 жыл бұрын
Looks great 👌👌😱😱😱😱😱🐨🐨🐨
@MoonpieCreations 3 жыл бұрын
Thank you.
@deadwoodcastingturning 3 жыл бұрын
man I would love to see that scrap turned in to some kind of resin diorama lamp
@MoonpieCreations 3 жыл бұрын
That would be so cool. Maybe a desert scene.
@deadwoodcastingturning 3 жыл бұрын
@@MoonpieCreations that would be cool maybe like a caravan in a sand storm
@khowler 3 жыл бұрын
1st video of yours I have seen. At least you showed us that you screwed up. Some people would either not upload it or cut out the first half due to the mess up. Even if there are a few bubbles, it's a neat idea. Also, as Bob Ross said: "We don't make mistakes, just happy little accidents.” He also said: “This is your world, You’re the creator, Find freedom on this canvas (wood) Believe, that you can do it, ‘Cuz you can do it. You can do it.” ― Bob Ross
@MoonpieCreations 3 жыл бұрын
Thanks Kerri. Sorry it took so long to reply. I appreciate you watching.
@RubenWoodcraft 3 жыл бұрын
that looks so great. I would have kept it on the chuck to avoid the problem of remounting it. ... BTW I'm also jealous of your vintage vending machine :)
@MoonpieCreations 3 жыл бұрын
Hey you changed your name? I saw you posted you might. I like it. The logo is killer too..
@RubenWoodcraft 3 жыл бұрын
@@MoonpieCreations Thanks. I did indeed after way too much debate :)
@oldguywoodworks7374 3 жыл бұрын
Looks great but I know we tend to be really critical of our own work as I am too but also that is what makes us good at what we do perfectionism! You may have explained it in the video and I missed it but why didn’t you mount the bowl on the lathe by the tenon after the pour? It would have given a better center?
@MoonpieCreations 3 жыл бұрын
SO I decided it would be the best way to reshape the outside and I had not finished the bottom yet. I could have done it either way. but my chucks and recess' have not been playing well together for some reason.
@marianhrubypumper4092 3 жыл бұрын
Enjoy some of your things. I do not work in wood I work in threads. When I have a very beautiful,or expensive cloth I do my design in scrap first rather then waste the silk threads and cloth would you consider using a piece of pine to perfect your design idea rather then screwing up a beautiful irreplaceable piece of gifted walnut? Love from mexico
@MoonpieCreations 3 жыл бұрын
I totally understand where you are coming from. The design was tried and true. The issue came when I got a snag while turning the recess. The camera did not catch it. It set the bowl off a bit. Then the jaws on my chuck were not on right which caused it to be off more. The pitch from pine will mess up a lathe. I use poplar to practice designs with though. Thank you so much for watching and commenting.
@daveporter2555 3 жыл бұрын
Wow. That WAS a beautiful piece of walnut. Don't worry, I wont unsubscribe yet. LOL. I've had my share of those days, so I wont give you too much s****, even if it is in jest. Enjoyed as always and have a good weekend. Dave.
@MoonpieCreations 3 жыл бұрын
Hahahaha, thanks Dave. When stuff goes wrong you just have to sit back and laugh. I'm working on two more videos from that week. ugh Things did not go pretty that week.
@mandicoleman7433 3 жыл бұрын
My mom has a 'diner' off her kitchen it's decorated with coke thingd
@MoonpieCreations 3 жыл бұрын
I have a cousin who's entire kitchen is decorated with Coke stuff
@johnkriete2152 3 жыл бұрын
I like it. Can you drill and fill the bubbles?
@MoonpieCreations 3 жыл бұрын
It is possible, but I decided they did not detract from the bowl since they were right on the coke symbol.
@slucas601 3 жыл бұрын
what do think of doing this same type of project with acorn caps instead of coca cola caps?
@ivanleterror9158 3 жыл бұрын
Would like to see a follow up done with the old metal caps if you could find them. Wasn't that one you opened up at the beginning?
@MoonpieCreations 3 жыл бұрын
Yes sir it was. I have a plan for turning the metal caps. A subscriber and I talked it out the other day. Just need to do it now. Thanks.
@ivanleterror9158 3 жыл бұрын
@@MoonpieCreations I remember the Our Gang comedies on TV where kids in the 40s would take a hat, remove the inner cork or whatever from the metal caps and press the cap material between the metal and interior half of the caps and they stayed on like buttons you'd pin on a hat.
@tommylein8000 3 жыл бұрын
Love the experiments! May i suggest a bug bowl that resembles this bowl but with bees dragonflys or other insects. Dont know if its possible but just a suggestion. Great vid as always
@MoonpieCreations 3 жыл бұрын
Thanks for the idea Tommy. Great minds think alike. If you look in the video, bottom right, while I discuss the wood block you can see I was experimenting with bugs in resin.
@onlyhuman1954 3 жыл бұрын
Great idea. I was thinking leaves. Autumn leaves, with their superb colours. That would be a beautiful bowl. But of course in the States you call it 'fall...' I love oak and beech leaves. And what about paper thin slices of bark? Is that even possible... 🤔
@charlesball8872 3 жыл бұрын
I liked your “save”! Could you have drilled those bubble with like a 1/8th bit and fill them with 5 min epoxy? Just curious. Then all you’d have to do is touch up sanding and polishing?! Maybe? Just a thought.... I do like your vids, sir.
@MoonpieCreations 3 жыл бұрын
Hey Charles. Yes I could most definitely do that, but I decided it did not detract enough from the bowl. They were right on the coke logo so I went with it. But it would have worked. Thanks for trying to help.
@davidcousineau9618 3 жыл бұрын
How long do you wait for the sanding sealer to dry before you sand?
@MoonpieCreations 3 жыл бұрын
I burnish it in and move to Acks sanding paste immediately. But if I don’t burnish I wait 30 mins.
@Bigtel1970 3 жыл бұрын
Curious.. I see a lot of resin work end up with bubbles in it - even after using a pressure pot. How does this happen? Also, you already know it, you could have injected UV resin into those bubbles and nobody would have known?
@MoonpieCreations 3 жыл бұрын
The pressure pot doesn't remove air bubbles, it smashes them smaller so you can't see them. The vacuum chamber removes air from the resin and wood. So that is why you sometimes still see bubble in a pressure pot pour. I decided in the end the bubbles didn't detract enough to drill them out and fix them. I've never used UV Resin, but have seen it on other channels. I have been thinking of buying some.
@CoyoteRoseCreations 3 жыл бұрын
I am wondering how it is I never see your chuck recesses blow out, is there something specific that you do to prevent that, or is it just more likely that I need to choose better wood, haha.
@MoonpieCreations 3 жыл бұрын
Hahahaha I have my share of blow outs, but I will say it is more about the wood than anything. My apple I used in the blue bowl I messed up a few videos back blew out. I like to use a tenon most of the time, but takes less time to do a recess as I don;t have to go back and fix the finish on the rim after I use the cole jaws.
@gregnewfoundland7926 3 жыл бұрын
Still a nice piece
@MoonpieCreations 3 жыл бұрын
Thank you.
@stephensayers2694 3 жыл бұрын
Good save. SJS Woodturning
@MoonpieCreations 3 жыл бұрын
Thank you.
@beverlylumley4150 3 жыл бұрын
Dam your luck, you do have your coke crown, good rescue. Still everyone has f... ups. Carry on. Stay safe
@MoonpieCreations 3 жыл бұрын
Thanks Beverly. I was pretty happy in the end, but this mess up did lead to next weeks bowl and I am pretty happy with that one. 😀
@TealCheetah 3 жыл бұрын
Sanding Sealer. we get it.
@MoonpieCreations 3 жыл бұрын
Bahahhahahhahhahahahaha Sanding Sealer!!!!!
@ghostwolf9163 3 жыл бұрын
What advice would you give someone setting up a small shop as a retirement hobby?
@MoonpieCreations 3 жыл бұрын
I would say don't......wood working and turning are a rabbit hole. lol. But seriously I would say you don't need big fancy tools to start off with. I started with cheaper tool and as I saved money up and perfected my bowl turning I bought better items I wanted. What type of wood working will you be doing?
@ghostwolf9163 3 жыл бұрын
@@MoonpieCreations Pine elm maple what I can get locally. I'm in Ohio.
@MoonpieCreations 3 жыл бұрын
@@ghostwolf9163 No I meant are you looking to make? Are you getting into turning or cutting boards or furniture or everything?
@ghostwolf9163 3 жыл бұрын
A bit of turning making vases and making boxes with inlay, bird houses,smaller simple stuff.
@QueenChatty1 3 жыл бұрын
So what if it has a few bubbles, I bet this bowl would sell s good many times if you had lots of them. I love it!
@squeakymoma 3 жыл бұрын
I still like it, bubbles or not.
@MoonpieCreations 3 жыл бұрын
Thanks.
@trurex007lee7 3 жыл бұрын
What kind of screws do you use on your faceplate? Did you just paint them or are they special?
@MoonpieCreations 3 жыл бұрын
I use deck screws. They have a star bit face.
@paddlefaster Жыл бұрын
I think the bowl came out great. The problem with any type of plastic is going to be the fact that it will not stick to epoxy. You can encapsulate the caps but if you get it thin enough they're going to break loose.
@MoonpieCreations Жыл бұрын
Thank John.
@morgancalvi6675 Жыл бұрын
Do you remember the temperature in the shop when you did a test run of the one bottle cap? Do you think if you put resin in a cap, or whatever next time, and put it in an air conditioned room...there will be a reaction?
@MoonpieCreations Жыл бұрын
To tell the truth, I am not sure on either question. I think I have used resin enough now that I could fill the caps without the heat up. Well to an extent since the chemical reaction (That causes heat) is what cures it.
@morgancalvi6675 Жыл бұрын
@@MoonpieCreations gotcha.
@tanyalulu328 3 жыл бұрын
🖒было интересно смотреть, хорошая идея. А крышечки от Pepsi можно использовать?))))
@MoonpieCreations 3 жыл бұрын
Любая пластиковая крышка может быть использована. Спасибо за просмотр
@MrJunk78 3 жыл бұрын
Slow hardener? I think they've got a pill for that nowadays. May cause deformation and overheating though.
@MoonpieCreations 3 жыл бұрын
Bahahahhahaha nicely done!!!!!
@williamroberts5180 3 жыл бұрын
I thought it looked very good, think the ones that you messy up are very good. That is why you spend more time on them.
@HodgePodgeWoodWorks 3 жыл бұрын
Oh damn, that pressure pot has no stickers and I just got mine yesterday....Is the Old detour address still a good place to send it to you?
@MoonpieCreations 3 жыл бұрын
Hahahahhaha, I have two of them. The other is being converted. this one doesn't seal yet. Not sure why.
@tinaharris4082 2 жыл бұрын
To get rid of bubbles like that just drill a little hole in the bubble then syringe with a needle some resin in to it then once dried sand it and such and nobody need know of any bubbles it's like magic.
@MoonpieCreations 2 жыл бұрын
Thanks for the tip Tina.
Mike Peace Woodturning
Рет қаралды 18 М.
Mr.Series
Рет қаралды 13 МЛН