Thank You :)

Thank you for the kind words. If you have any questions, write to marcinsmelkowski83@gmail.com best regards

@@MS-pd6rm Thank you so much, if I do I promise to keep them short ;)

Vielen Dank

Merci beaucoup

Thanks :)

Thanks :)

Thanks. If you do, show the photos :)

Thanks :)

Thanks

Thanks

Muito obrigado

Thanks

Thanks :)

Thanks :)

@@MS-pd6rm can I ask please, what kind of wood did you use?

Thanks :)

Thanks :)

🇲🇦 hello, Good luck to you, support my CN, tks 😚

Thanks

Thanks :)

​@@MS-pd6rmWOW BEAUTIFUL. What's size is this.

Thanks

At the bottom of the pool there is a hard polystyrene that covers the screws

Thank you :) The wood I used was spruce.

Gracias

I was wondering the same thing!

I put 2 cm thick hard polystyrene on the screws. I cut holes for the screws and one more layer of 1cm hard polystyrene for that

Thank you for your kind words, unfortunately I don't have any plans. I did everything out of my head :)

Thank you for the kind words. The water depth is 1.2 meters

@@MS-pd6rm It is a great project, do you have a link where you bought all the accessories for your pool? If it is not too much trouble, will you have the exact measurements? I leave you a👍

Thanks :)

Hi. I made the liner myself, bought a pool foil and glued with PVC glue

Hi My pool is 4x3m in the center, and with a full pool, the deviation of the longer walls does not exceed 10mm, with large waves it feels like a gentle movement of the wall but does not bend any more. I am now 3 years old by the pool and nothing is happening to it. Next year I will only change the top rim to BSH wood, i.e. glued wood to make it more stiff. For a 10m pool, I would use metal brackets embedded in concrete and covered with wood, and of course thicker boards. I think about 6 cm. I made the pool foil about 5 mm smaller than the pool after flooding, the water tightened and there is no fold on it. For your pool, I would recommend two skimmers and a sand pump with a capacity of about 12,000 liters per hour After three years of use, I did not notice any signs of rotting (I used an OSMO impregnation) If you have any questions, please write :) best regards

@@MS-pd6rm Many thanks for your help. I am surprised you get so little movement with the waves. As you suggested I will use welded metal for the uprights to increse the stiffness. I will let you know how it goes. Yet again, thanks for the reply.

Hi I'm sorry but I have no plans, I calculated everything in my head and changed it on a regular basis

Hi, I used a sand pump. There is no drain on the ground.

Hello The materials cost about 2,100 euros, 2,400 $, 1,850 pounds. The project lasted about two weeks. I bought the liner at www.wszystkodobasenow.pl/folia-basenowa Greetings :)

Amazing job

@@fabiangalan8377 thanks

Hi The white material is the base for the pool foil. I bought pool liners in rolls and glued them with PVC glue. The pool is now 3 years old and there are no problems with it. I recommend :)

Hello There are no stairs in the pool. In the water, the man is lighter and it is no problem to jump and sit on the edge of the pool. Then just turn around and go down the stairs :). My mother-in-law is over 60 years old and is 160cm tall and she has no problem :)

Hej użyłem kleju do plandek PCV trzyma rewelacyjnie.

@@MS-pd6rm Dziękuję i pozdrawiam👍

Bardzo ładny basen👍, z jakiego to gatunku drzewa ?

Hi. internal dimensions are 3m x 4m water height 1.2m.

Very nice, what's the internal materials?

Witam Pod płytę był wysypany żółty kamień podsypkowy i zawibrowały. Grubość wylewki Ok 20cm. Pozdrawiam

Wymiar 4x3x1.2 to wymiar wewnętrzny (lustra wody)

not with the right chemistry. I clean it every week

Witam Basen mam 4 rok i dopiero w przyszłym roku będę go malował ponownie - jeśli dobry impregnat (ja mam osmo) to raz na 5 lat starczy. lekki szlif i nowa warstwa

Hej. Chodzi Ci o materiał czy deski profilowane na sciany ?

@@MS-pd6rm jakie deski uzyłeś bo wygladają na bardzo solidne

@@MD-ij6vr deska użyta na ściany to balik profilowany na podwójny pióro wpust o grubości 40mm i wysokości 146mm, słupki to kvh 100mmx100mm całość to drewno świerkowe

@@MS-pd6rm dziękuję pięknie ;) super to wygląda :)

I have no idea what that means but it sounds pro and logical so I'm gonna Google it.

Cześć folię kupiłem w rolce i kleiłem sam.

@@MS-pd6rm Jak ją kleiłeś?

@@TheMTalma na klej PVC

about 3 thousand dollars

For the pool and wood?

Book a ticket :)

M#S deal!!

I used pool liner as a liner. For filtration I used a sand filter and a pump of 7600 liters per hour.

beton ma grubość ok 20 cm. Podłoże pod betonem jest utwardzone.

@@MS-pd6rm translate to English please thanks

Sorry, I don't know what I was thinking about when I wrote it to you in Polish :) concrete has a thickness of about 20 cm. The ground under the concrete is hardened

Cześć drewno to swierk a te deski nazywają się "profil scienny" kupione na skaładzie STAMADREW

Thank you. I bought pool foil in rolls and glued it myself with PVC glue

Thank you, I like the tongue and groove sides and plates for the posts. I try to have a project or two each year. This year was building a Deck off my house next spring will be a Porch and perhaps I will get around to a Pool too. Thank you again excellent work.

Witam Grubość desek to 40 mm

The materials cost about 2,100 euros, 2,400 $, 1,850 pounds.

the price does not include concrete

Wow, would love to see a pic!

Dzięki koszt materiałów 3 lata temu (bo wtedy go robiłem) wyniósł ok 9 tys zł. teraz trzeba liczyć 10tys. Zamierzam zająć się takimi basenami zawodowo bo jest bardzo duże zainteresowani mimo wysokiej ceny :) Cena wykonania u mnie to ok 14 tys zl. Pozdrawiam

M#S jaka lokalizacja temat wart uwagi Rozumiem na gotowo razem z filtrami ?

@@tomaszanio9019 proszę napisac na marcinsmelkowski83@gmail.com pozdrawiam

@@tomaszanio9019 tak z filtrami cały gotowy basen, jedyna czynność po stronie inwestora to wylewka.

1- You get what you pay for... 2- Store bought pools don't look like a piece of art that will continue to look like new year after year with little more than a coat stain/wood preserver. And 3. I do believe it could be built without pouring an entire slab, though for the little extra money I know I would.

Concrete is only about $120 or so a yard, 2 yards would make a slightly bigger pad than homie. Concrete works isn't hard, just labor intensive.

Witam koszt materiałów ok 9 tyś zł (3 lata temu) teraz trzeba dak ponad 10 tyś Pozdrawiam

He already did in a response to Catrina above.

Thanks

Hi I made them myself. :)

czekam :)

Hi, wood is a spruce

Hi, the black material is insulating foil

Good idea thanks :)

Thank you the internal dimension is 4x3x1.2 meters the external dimension is 4.28x3.28x1.2 meters

@@MS-pd6rm thank you so much 👍👍

@@MS-pd6rm Are you have plans ??

I don't have plans. I did everything out of my head

Hi. The white material is agrotextile