Woodland Mills TF810 PRO PTO Wood Chipper First Look
Рет қаралды 10,516
Күн бұрынI've run the Woodland Mills WC68 for 6 years and without so much as a hiccup, it's time to see how things have changed in the wood chipper world. In comes the new twin-flywheel TF810 Pro PTO Wood Chipper by Woodland Mills. I'll be assembling and trying out this new technology for the first time today. Looking forward to seeing how this eats the sawmill slab wood!
Woodland Mills TF810 PRO PTO Wood Chipper
woodlandmills.ca/tf810-pro-pt...
Tractor: 2012 Kioti DK40se HST Cab (40hp engine hp, 32 hp PTO)
@woodlandmills #discoverthewoodland #woodlandmills #woodchipper #kioti #tractorattachments #tractorimplements
@sawingwithsandy 2 ай бұрын
Thanks for all your support everyone and thank you to Woodland Mills for the new Wood Chipper! Lots more wood chipping videos to come!
@WoodworkingTop535 26 күн бұрын
great videos
@wallacefrey6247 2 ай бұрын
I'm really impressed with the way that Woodland Mills packs all of their products for shipping. They go above and beyond with all of the metal reinforcement.
@sawingwithsandy 2 ай бұрын
It sure is well packaged. I'm happy everything is wrapped tightly in the protective wrap inside the steep crate
@ironsales5669 2 ай бұрын
Nice addition to the Red Pine Forest. I've heard is said, he who dies with the most toys wins, it looks like you are winning...
@sawingwithsandy 2 ай бұрын
Thank you! Sure is a nice upgrade
@rolothatcher5201 2 ай бұрын
This should really be a great help with those wet spots. Nice video.
@sawingwithsandy 2 ай бұрын
Thanks Rolo!
@tombooks1410 2 ай бұрын
Seen your recent purchase and video. Last year I purchased a wm8h woodmax chipper. Going from a DR chipper to a fully hydraulic chipper is night and day difference. Cleans up my small tree farm easily. As always, great video channel. Thank you!
@sawingwithsandy 2 ай бұрын
Thanks Tom!
@jamesa5720 2 ай бұрын
With 200 acres of pine to clear for pasture over the rest of my life, I am about to order the Woodland Mills trifecta: HM130Max Sawmill, WG28 Pro Stump Grinder and now the TF810 Pro Chipper. Many of your videos have influenced me and I know Woodland Mills is a great Company with stellar products, all value priced. I'll tell cousin Josh at Woodland that I watched this video, ha.
@sawingwithsandy 2 ай бұрын
Hey James! That's a good trifecta right there. Way back in 2017 or 2018 I did double duty much like you but I bought the HM130, WC68 Wood chipper. Have been very happy with everything
@jamesthomas1967 2 ай бұрын
By watching Sandy, I bought the 130 Max and and a tractor just like his
@stevebulach5198 Ай бұрын
Hey Sandy, The new chipper looks like great piece of kit! I have a WC 68 the same as you & I've found that if you keep an eye on the chips coming out & they start to slow down when feeding it, I have a weed blower handy to put down the chute which stirs the stuck chips up & away you go...... It seems Woodland Mills have fixed that with the twin flywheel. 😃👍
@OutoftheWoods0623 2 ай бұрын
nice one!
@johnaddis1022 2 ай бұрын
That one should work well for you Nathan
@OutoftheWoods0623 2 ай бұрын
@@johnaddis1022 I went with a different brand but looks about the same,
@sawingwithsandy 2 ай бұрын
Thanks Nathan! Hope all is well with you!
@johnaddis1022 2 ай бұрын
@@OutoftheWoods0623 I went with the Wood MAX 8M its was a lot cheaper, Simple and does very well.
@stigmartinrnning6751 2 ай бұрын
Hi Sandy. Look's like a great upgrade. The other one is good, but the new one is better. Hope you get to keep it 👍👍
@sawingwithsandy 2 ай бұрын
Thanks Stig! This unit has a few extra features that I really like. The twin flywheel is something I'm really liking. I"ll be keeping this unit
@miguelfreytes3498 2 ай бұрын
Sandy you’re explain the best.you have experienced success coming bigger little by little.must important you help people’s.love your videos thanks you
@sawingwithsandy 2 ай бұрын
I appreciate all your support Miguel
@waynebarnes2679 2 ай бұрын
Hey Sandy, glad to see your channel getting the recognition that it deserves, you are certainly a brand ambassador for Woodland Mills they have a fantastic product and you showcase it well, I am sure that this video will create lots of inquiries for Woodland Mills I have noticed a lot of other channels reference your channel about Woodland Mills products, Keep up the good work and keep the vids coming.
@sawingwithsandy 2 ай бұрын
Thanks for your support Wayne!
@benscoles5085 2 ай бұрын
I went to Woodland Mills web site and chatted about an extension track for my sawmill, and mentioned Sandy, it did not get me a discount but they were overjoyed that I watch his channel and the company name is always fresh in my mind.
@sawingwithsandy 2 ай бұрын
@benscoles5085 thanks for passing along my name to them down at Woodland Mills. They are great folks every time I talk to them as well. Friendly and down-to-earth.
@deprived56501 2 ай бұрын
I've wondered in the past when you were getting a bigger chipper. Glad you have one now, Your life should get easier now. Good vid. Thanks.
@sawingwithsandy 2 ай бұрын
Thank you! The WC68 is a great chipper and it's been a solid unit for over 6 years now
@deprived56501 2 ай бұрын
@@sawingwithsandy I do not disagree about that. I've just watched you have to fight the larger slabs at times and thought you could use a bigger chipper.
@johnwoody4905 Ай бұрын
good video and job that is a nice up grade it will make life easier. take care, be safe and well.
@SawdustandSweatNC 2 ай бұрын
Good on you mate. Anything that helps keep the yard clean is, as we both know, a real blessing.
@sawingwithsandy 2 ай бұрын
Great to hear from you! I was actually just about to switch over the lubriucation on my sawmill to the spindle lube you sent me. thanks again for that
@SawdustandSweatNC 2 ай бұрын
@@sawingwithsandy Good sawing. Hope it works as well on the pitch you have as it does with our pines .
@timme8200 2 ай бұрын
I bought the wc88 in November. Absolutely love it. One piece flywheel spins 1080 rpm. I run a 8" oak log through it and my 55 hp tractor barley grunted.
@sawingwithsandy 2 ай бұрын
The WC88 is a great chipper!
@matthewtaylor2185 2 ай бұрын
I am assembling my new wc88 today. I looked hard at the 810, but I thought it looked like too many moving parts to me. I don't remember ever seeing anything bad about the 88, and it seems like a proven design. I might be wrong, but I think I'm going to be very happy with the 88. I do wish the infeed chute sloped down into the chipper wheel like the 810, but other than that, I like what I'm seeing with the construction of the 88.
@littlegriffoffgridalberta6837 2 ай бұрын
Sandy Great review ! They have some good products for sure :) It ate up them slabs pretty quick & nice it can handle some good sized wood as long as the tractor will handle it ! them chips will keep your feet dry lol,
@sawingwithsandy 2 ай бұрын
I certainly could use some of those chips around now that spring is here. Really wet out there e
@jeffhuffman5433 2 ай бұрын
You're 68 chipper does a very fine job, but I do believe this one will out do It definitely blows chips much further. And woodland Mills products are very good and seem to be getting even better
@sawingwithsandy 2 ай бұрын
Thanks for checking out the video Jeff! I agree, this one has some great features that will be a good upgrade
@paulwal6993 2 ай бұрын
Wow !!! that's great they gave you a woodland mills wood chipper, too try out Also made in Canada , even better ...
@sawingwithsandy 2 ай бұрын
Thanks for checking out the video Paul!
@Supercruiser66 2 ай бұрын
Aren't they made in China?
@gerryspang5917 2 ай бұрын
An impressive chipper, that main flywheel looks like it is heavy duty, looks like a good product.
@sawingwithsandy 2 ай бұрын
I'm liking what I'm seeing so far with those twin flywheels. Seems like a great idea
@travelledwithteens1522 2 ай бұрын
another thank you. sometimes i think youtubers are all condescending master mechanics... you allowed us to see an adjustable crescent wrench and nuts falling to the ground., etc.. love your videos. they were instrumental in me ordering a 130 max.
@sawingwithsandy 2 ай бұрын
I appreciate the words of support! I'm just like everyone else and so I"m glad I have been able to convey that in the videos. Have a great weekend!
@TheHobbyShop1 2 ай бұрын
Awesome attachment. The part where the chips were flying at the camera made me flinch.
@sawingwithsandy 2 ай бұрын
lol I didn't know if the chips would touch the camera but after the first few seconds I sure learned in a hurry
@outdoorswithlarryrobin 2 ай бұрын
Hello Sandy, its a beast for sure👏🪵🇺🇸
@sawingwithsandy 2 ай бұрын
Sure seems like it will be a big help around here
@richardbrowne1679 2 ай бұрын
Hi Sandy: I really like that chipper. Thanks for sharing.
@sawingwithsandy 2 ай бұрын
Thanks Richard. Glad you came along for the video
@whatscoldoing5627 2 ай бұрын
I have a WC68 as well and I find that it cannot handle the larger examples of our Australian hardwoods if they are dry. The blade arrangement on this one would answer that problem for sure. Lovely! When you get bored with this one Sandy, post it to me please🤪
@sawingwithsandy 2 ай бұрын
I've heard the Australian hardwoods is very dense compared to some of the hardwoods I may be used to. I can imagine any machine operating there gets put through a test!
@tomt8320 2 ай бұрын
Hi Sandy. This looks like a real unit. 10" wide has my attention. Being able to cast chips a good distance is very important to avoid rehandle.
@sawingwithsandy 2 ай бұрын
Hey Tom! The 10" wide really got me interested as well. wider the better for chipping slabs
@shooterjohn7163 2 ай бұрын
Hey Sandy, I think this is a better fit for your operation. It seems like it is well matched to your tractor as well… John
@sawingwithsandy 2 ай бұрын
It sure seems to fit real well .I like the speed and distance the chips go at
@shooterjohn7163 2 ай бұрын
@@sawingwithsandy I agree with you a nice machine… John
@lumberjill6598 2 ай бұрын
My goodness, would you check out that beast! I'm impressed! My experience with wood chippers is they get jammed up with sticks because the opening is too narrow or the chips don't shoot out far enough so they get bound up in the chipper. I see neither of these problems and that means a great implement in my book! Fantastic! 👍👍👍
@sawingwithsandy 2 ай бұрын
Hey Jill! Yeah this unit I like with the wider opening and size that second flywheel is spinning so fast I'm guessing the chips are out of the cutting flywheel in a blink
@foggyvalleyacres 2 ай бұрын
Ive had mine for about a month, I am loving it so far! Very well built and the twin flywheel is great to keep the chips flying!
@sawingwithsandy 2 ай бұрын
Great to hear that! I’m looking forward to getting some hours on mine
@critical-thought 2 ай бұрын
I recently purchased the WC68 model like your old one. The 810 definitely spits out the chips! Looks like the chips might be a little more uniform too. I wonder now if I should have saved up some more to get that one. I can say, though, that I am very happy with the WC68 model.
@sawingwithsandy 2 ай бұрын
I don't think you did wrong with the WC68 as I have used it for 6 years and still more and it's been solid!
@critical-thought 2 ай бұрын
@@sawingwithsandy Your videos with it are a part of what convinced me to buy it instead of the other competitors. It is a robust quality build and does a great job for sure.
@keithprentice8298 2 ай бұрын
Hi Sandy, on my last trip to WM showroom I saw the new twin flywheel and I was very upset. As an owner of a wc88 that I bought less than a year ago, that I bought thinking go big or go home (it runs on the back of a 75 HP tractor) then they came out with this, yes i did ask they wouldn't take the wc 88 on trade! That's ok, I actually don't do crazy amounts of chipping and my WC88 is still an awesome machine. With the Emerald Ash Borer killing all my trees I am frequently feeding whole dead 6" ash trees into it and they are quickly converted to trail bedding.
@sawingwithsandy 2 ай бұрын
Hey Keith! That Emerald Ash Borer sure is causing some destruction. I don't have many ash here on my property but I do know of others who are having all their ash wiped right out.
@carlmclelland7624 2 ай бұрын
Sandy, I'll say it again, you're having way too much fun! IF... I were living on the ranch, based upon what I just saw, I AM IMPRESSED. If I were in the market for one, I would give this chipper serious consideration. Now it's time to make more slabwood, which means it's time to saw some lumber, which means, it's time to build something.... Take care, and enjoy your new toy!
@sawingwithsandy 2 ай бұрын
Hey there Carl! You're absolutely right. I'm just about ready to get the old tool pouch out again. Building season is here!
@chrisleblanc5042 2 ай бұрын
If I had a tractor I'd get a 3 point hitch chipper. Future goals
@sawingwithsandy 2 ай бұрын
It sure is handy for cleanup duties
@walterkucharski4790 2 ай бұрын
I have had the WC88 for years and use it constantly and loan it out also. No issues with it except for the occasional clog with wet twigs and coniferous trees. This should be an improvement. If I can sell mine I'll trade up.
@sawingwithsandy 2 ай бұрын
Hi Walter, I"ll be sure to have ongoing videos showing this unit so you can compare to see if you notice any different performance with this and your WC88.
@Growing-Our-Retirement 2 ай бұрын
Have been looking at the WM 8” chipper for 2-3 years now. This is another choice. Looks like it really throws the chips. Thats a plus!
@sawingwithsandy 2 ай бұрын
It sure gets those chips moving!
@jmar5787 2 ай бұрын
Sandy seemed like a pretty easy setup from woodland mills I sure could use one of those for my sawmill slabs and debris i have all over my property. thanks for Vid on setting it up and how easy it is to operate.
@sawingwithsandy 2 ай бұрын
Hey jmar! Thanks for. checking this video out!
@rodneywroten2994 2 ай бұрын
very nice Sandy
@sawingwithsandy 2 ай бұрын
Thanks Rodney. Have a great afternoon!
@saintaugustine1715 2 ай бұрын
Good afternoon Sandy I was glad to hear when you said you where going to different place in your trail to chip some in the wet hole you got here and there in your trail. It defenatly throw the chips out faster and farther seam so far the tractor had no problem with it . I know you will put it to good use . By the way I would suggest not to stand straight in the back because I did see some piece fly back word and quite fast on other chippers so be carefull have a great day
@sawingwithsandy 2 ай бұрын
Thanks for coming along for the video
@lonewolfFirearms 2 ай бұрын
I would love to have one of those but being retired from an on duty injury as a police officer im afraid that is just out of my budget. I'm positive it's worth every penny they ask for them though. Another great video sandy.
@sawingwithsandy 2 ай бұрын
Always great to have you along for the video. I"m sure after a long career like yours the retirement is well deserved
@smisky1086 2 ай бұрын
Makes short work of the flitches and "too small" logs. Great assembly video - at first I thought the TF810 panels were upside down - until you lowered the input chute into position..
@sawingwithsandy 2 ай бұрын
hahah I would've kicked myself if I did all that work and they were upside down
@cjm3508 2 ай бұрын
I have the old one and pine is a nightmare most of the time. I really like the looks of this new one!!!!!! It maybe the new way to go!!!!
@brianwestveer9532 2 ай бұрын
Very nice Sandy
@sawingwithsandy 2 ай бұрын
Thanks Brian
@toddpacheco4748 2 ай бұрын
Sandy,it’s to bad that you didn’t have another tractor for using both chippers 😮😊❤
@sawingwithsandy 2 ай бұрын
hahah Then I'd need to have two of myself.
@lornesteed2417 2 ай бұрын
Well, that's a beast!! Wish my tractor would handle something that large... mine is a Deere 3025E with only 25HP. You are going to have fun with that one Sandy.
@sawingwithsandy 2 ай бұрын
Thanks Lorne!
@MannistoCay 2 ай бұрын
Ok the TF definitely throws the chips farther. Nice demo Sandy. Have a great weekend! 🪵🌴☕️
@sawingwithsandy 2 ай бұрын
Hey there! Great to hear from you. Hope you have a great weekend as well and the blackflies aren't carrying you away yet!
@MannistoCay 2 ай бұрын
@@sawingwithsandy not yet but I got my first mosquito bite the other day. 🤨. 🌴
@johnrowan2309 2 ай бұрын
I considered a 3 point hitch chipper but didn't want to run up the hours on the tractor for chipping. I opted for the DK2 unit that has DOT approved tires that can be towed over the road up to 40 MPH and does up to 6 inch sticks. I tow it behind my John Deere Gator 6x4 so I can load other tools in the bed of the Gator when chipping.
@darcyhutchinson171 2 ай бұрын
We been under a lot of burn bans.that would help .keep sawing
@jtbear70 2 ай бұрын
Nice, you will put it to good use for sure! 😊
@sawingwithsandy 2 ай бұрын
It sure will get some hours on it!
@na-et2gp 2 ай бұрын
Nice that chipper really throws the chips compared to the wc68. I also have to make piles then add a step to spread it
@sawingwithsandy 2 ай бұрын
That's something I never realized I was going to like as much but now I do like being able to spread them without using the tractor
@09FLTRMM77 2 ай бұрын
MM77 Approved 👍🏼👍🏼
@sawingwithsandy 2 ай бұрын
Hey Mike! Thank you for all your support
@mikechristensen9744 2 ай бұрын
Nice piece of equipment. It doesn't surprise me though as Woodland Mills seems to really care about what it produces. I think a possible add-on for this would be for Woodland Mills to have a way to adjust the chute direction remotely from the where the wood is fed into it even if just a control linkage like a snowblower has....should not be too hard to do and could be a possible accessory that could be purchased. Maybe you could mention this to Woodland if you agree.
@sawingwithsandy 2 ай бұрын
May be a neat idea there Mike!
@dandenney3712 2 ай бұрын
I would like to see how it does on the pine limbs when they are full of needles. It would be interesting to see if this new system resolves the clogging chute problems of the WC's.
@sawingwithsandy 2 ай бұрын
I agree with ya there. I want to see how it does with that as well. I"ll be sure to have videos coming up with that type of thing.
@Frontireadventures 2 ай бұрын
Pretty impressive.
@sawingwithsandy 2 ай бұрын
Glad you came along to check things out
@jeanpomerleau8416 Ай бұрын
I have the wc68 also, and I love it. That new tf810 seems to work very well too, but it looks like it sits lower? not sure if I would like that part. great video
@BearCreekWoodworking 2 ай бұрын
The twin fly wheels throw those chips SOOOO FAR! Awesome Chipper! I need one! 😃👊
@sawingwithsandy 2 ай бұрын
I'm liking it so far for sure with the twin flywheels
@pauldyer9148 2 ай бұрын
Come now Sandy, bigger is ALWAYS better!
@sawingwithsandy 2 ай бұрын
I think you're right!
@johnmagnus1016 2 ай бұрын
looks like it works very well. Everything you put through was pretty small! Would be nice to see how it can handle a 6 or 8 inch tree! LOL
@sawingwithsandy 2 ай бұрын
In the future I'll get a bigger variety of wood through it.
@mirceanouradachian9168 2 ай бұрын
👍👍👍💙💛❤Buna SANDY ! 💙💛❤👍👍👍
@sawingwithsandy 2 ай бұрын
Thank you!
@johnaddis1022 2 ай бұрын
Very Nice Machine. Glad you were selected to demo the new chipper. When I talked with Woodland Mills they held you in high regard. I wonder if the chipper blades are the same size as the WC 68 just more of them. Work it hard show us what it can do! Cheers! John
@sawingwithsandy 2 ай бұрын
Hi John. That's great to hear they said good things about me. I"ll be sure to make some comparison videos between this unit and the WC68 to see if the blades are the same size.
@inspectr1949 2 ай бұрын
Watching closely as several have reported issues with the 810, the 88 on the other hand appears time tested.
@sawingwithsandy 2 ай бұрын
I’d be interested in hearing more about this. Where did you see people were having issues?
@inspectr1949 2 ай бұрын
@@sawingwithsandy STUFF N' SUTCH! for one.
@quarlow1215 2 ай бұрын
Sweet, that thing eats debris pretty damn nice.
@sawingwithsandy 2 ай бұрын
Sure takes care of the slab wood pile in a hurry
@markwaymouth4247 2 ай бұрын
Wow, it's a bigger similar job.
@sawingwithsandy 2 ай бұрын
Thanks for checking out the video Mark
@buddyreed2623 2 ай бұрын
Hello Sandy. I was wondering if you would put a log in, and you did be it though a top of a log. Chip as you go. Have good days!
@sawingwithsandy 2 ай бұрын
Hey buddyreed! I'll be sure to gets some more logs going in there to show it in action real soon
@paulfrizzell31 2 ай бұрын
👍
@sawingwithsandy 2 ай бұрын
Thanks Paul
@curtisb6904 2 ай бұрын
Hey, Sandy. Love your channel. I always learn something new. I was wondering how fine the output of the chipper is. Whether it would produce fine enough chips to feed into a wood pellet mill to make pellets for a pellet stove. I have a sawmill and plan to use the sawdust to make wood pellets, but, of course, I also have lots of flitches and other trimmings I'd like to be able to feed into the pellet mill. Don't t know whether you can shed light on this, but thought I'd ask. Best of luck to you with your new "toy."
@sawingwithsandy 2 ай бұрын
That's a good question Curtis. I"ll be sure to get a good close up of the Woodchips next time around to help with that. I'm not too sure as it is coarse at times but I wonder if it would still work for the pellet stove you mention.
@curtisb6904 2 ай бұрын
Thanks for the reply, Sandy.
@moparcountry420 Ай бұрын
I would like to know how it works on leaves
@johnfournier5688 2 ай бұрын
Hi Sandy. I love your videos. I have a Kioti tractor as well. I have 33hp at the PTO on mine which seems to be slightly more than your tractor. Do you feel the PTO HP is any issue for you using this model vs. the 68 you have?
@sawingwithsandy 2 ай бұрын
Good question John. I haven't had much time on the new wood chipper yet but from my first use I didn't seem to sense the tractor struggling at all with the pine I was chipping. I"ll be sure to update everyone as I get a bit more use out of the chipper
@mikegayda5072 2 ай бұрын
Great job, Sandy. Let us know when you get into the bigger stuff. A couple with the same machine were breaking shear bolts, a lot of them. Just wondering how is it going with you? One other question How much does the flywheel weigh?
@sawingwithsandy 2 ай бұрын
I’m wondering if they got a bad batch of shear pins and/or were engaging the pto at high rpm causing a large shear force to break weakened shear pins. I’ll be sure to keep an eye on that though. I’ll keep ya updated if I notice the same thing happening
@sawingwithsandy 2 ай бұрын
I’m not too sure on the flywheel weight
@kensmith4918 2 ай бұрын
and I thought that you were done buying toys for awhile , boy was I wrong lol
@sawingwithsandy 2 ай бұрын
Hey Ken! I actually have some other surprises coming right up you'll have to tune in for. I don't think things will ever stop haha. To be fair though, this wood chipper was given to me
@kensmith4918 2 ай бұрын
@@sawingwithsandy I won't be able to give you any smart remarks for the next week or so going on a 8 day cruise but I'll be back ha ha
@sawingwithsandy 2 ай бұрын
Enjoy the vacation Ken! I'll keep the blackflies busy while you're away!
@southernadirondackoutdoors 2 ай бұрын
What provides the down force to the infeed roller...I couldn't tell if it is a spring or a pressure cylinder of some type.
@sawingwithsandy 2 ай бұрын
Good question. it's the two shocks you can see on either side of the infeed
@contrafax 2 ай бұрын
That was impressive, about how long was actual setup?
@sawingwithsandy 2 ай бұрын
Good question. It took me a few hours to unbox and fully assemble I'd say. Maybe 2-3 hours in total
@contrafax 2 ай бұрын
@@sawingwithsandy Thank you for the info, not that I am likely to ever need one.
@jakeashline9538 2 ай бұрын
Anyone run one on a smaller tractor? I’ve got a Mahindra 1640 which is rated like 28hp at the pto and was wondering if it’ll handle this chipper as long as I’m running primarily smaller pine and such. Wanna get this model in case I ever go bigger but wanna make sure my tractor will run it
@Jordan-rc7hl 2 ай бұрын
What hp does your kioti tractor have at the pto?
@sawingwithsandy 2 ай бұрын
32hp at pto
@Nadine-tl2oq 2 ай бұрын
What is the pto hp? Your tractor appears to be the same size as mine, just wondering how you're running the chipper
@sawingwithsandy 2 ай бұрын
Hi Nadine, on my tractor PTO hp is 32hp
@thepetersfamily6323 2 ай бұрын
@@sawingwithsandy Thanks for the quick reply! My husband is in love with your whole setup. You're the reason we have our tractor and our sawmill! You're living his dream life, apparently! HAHAH :)
@sawingwithsandy 2 ай бұрын
@thepetersfamily6323 I appreciate all your and your husbands support!
@ricklafrance6304 2 ай бұрын
Hi Sandy you are a dealer for woodland
@sawingwithsandy 2 ай бұрын
Nothing for sale here however
@sawingwithsandy 2 ай бұрын
I do have a wide array of Woodland Mills equipment though that's for sure
@vannrollins9464 2 ай бұрын
If that is how poorly it handles small plane slabs- good luck with larger oak limbs!
@sawingwithsandy 2 ай бұрын
I'm not sure what ya what ya mean as I thought it did great
@user-kr5nh6pw4x 2 ай бұрын
"A" I don't read Canadian you know . But are all the words upside down cuz you're at the top of the continent . Them flat earthers man they don't get it do they . If you can see the world upside down from a sphere angle I guess the words would be upside down😂. Canada were beavers go to Central America to get relaxation because them boys have got their wood chippers out and how the beaver going to damn up a river with sawdust. Canada don't pee in the woods you might get a wood chipper
@sawingwithsandy 2 ай бұрын
Thanks for coming along for the video
@johnleeman5992 2 ай бұрын
Man, you get all the toys. Making hog fuel.
@sawingwithsandy 2 ай бұрын
Hey John! Sure am fortunate to get this thing for my place
@moparcountry420 Ай бұрын
I would like to know how it works on leaves
@sawingwithsandy Ай бұрын
I haven’t chipped leaves specifically but I believe it’s more for chipping brush with some wood instead of straight leaves
Garena Free Fire Global
Рет қаралды 59 МЛН
Pacific Northwest Hillbilly
Рет қаралды 2,8 МЛН
IDigIt4
Рет қаралды 329 М.
The Hippie Geeks
Рет қаралды 16 М.