Woodland Mills WG24 Stump Grinder Setup and First Use

Woodland Mills WG24 Stump Grinder Setup and First Use - MCG Video

Рет қаралды 8,451

My Cluttered Garage - Outdoors and DIY

7 ай бұрын

Today I’ll unbox, setup, use and review the woodland mills WG 24 stump grinder.
woodlandmills.com/
Be sure to use the following discount codes and save money!
Saw Haul sawhaul.com save 5% with code MCG
Ken’s Bolt On Hooks boltonhooks.com save %5 with code MCG
Hisea Boots hisea.com save 15% with code MCG
Here are some product suggestions. These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support!
AirTec Lube-Shuttle Pistol Grip Grease Gun Kit:
amzn.to/3O0pj1z
LockNLube Grease Gun Coupler:
amzn.to/3kPcvwu
Recommended Grease:
Valvoline Moly Fortified
amzn.to/3jNM1Kv
Nitrile Gloves:
amzn.to/34Kg8OG
Deerskin Gloves:
amzn.to/2I17NNy
My Video Gear:
DJI Osmo Action 3:
amzn.to/3JqbZno
DJI Mic
amzn.to/3J4vAIv
DJI Air 2S
amzn.to/3Yxid9n
Rode Wireless Go II microphone:
amzn.to/3eiJatG
Canon M50 Camera (now Mark II):
amzn.to/3vHW9uD
Battery adapter for M50:
amzn.to/2RshsBE
Sigma 16mm prime lens:
amzn.to/3vJDRcx
Sigma 30mm prime lens:
amzn.to/3epFneh
Variable ND filters:
amzn.to/3tmoHIs
This may apply to the B2301, B2401, LX2610, LX series, BX series, L series, MX series, M series, and even many other Kubota, John Deere, Mahindra, or other brands of tractors. Featuring homesteading, gentleman farming, rural living, DIY projects, and more!
This video is intended for entertainment purposes only.
#MCGtube #MCGTV

Пікірлер: 110

@MyClutteredGarage 7 ай бұрын

woodlandmills.com/ Be sure to use the following discount codes and save money! Saw Haul sawhaul.com save 5% with code MCG Ken’s Bolt On Hooks boltonhooks.com save %5 with code MCG Hisea Boots hisea.com save 15% with code MCG Here are some other product suggestions. These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support! AirTec Lube-Shuttle Pistol Grip Grease Gun Kit: amzn.to/3O0pj1z LockNLube Grease Gun Coupler: amzn.to/3kPcvwu Recommended Grease: Valvoline Moly Fortified amzn.to/3jNM1Kv Nitrile Gloves: amzn.to/34Kg8OG Deerskin Gloves: amzn.to/2I17NNy My Video Gear: DJI Osmo Action 3: amzn.to/3JqbZno DJI Mic amzn.to/3J4vAIv DJI Air 2S amzn.to/3Yxid9n Rode Wireless Go II microphone: amzn.to/3eiJatG Canon M50 Camera (now Mark II): amzn.to/3vHW9uD Battery adapter for M50: amzn.to/2RshsBE Sigma 16mm prime lens: amzn.to/3vJDRcx Sigma 30mm prime lens: amzn.to/3epFneh Variable ND filters: amzn.to/3tmoHIs

@christophercharles3169 13 күн бұрын

Nice video. I'm looking at this SG myself. First video I see that follows the complete setup instruction. I saw one tractor operator who installed a camera somewhere within the 3ph so he could get a better view of the blade's location. He mounted the display to his hood using magnet. It worked pretty well. Based on the other videos I saw you were hitting the center of the blade too often which was causing it to jump. Like you said though, it's a learning experience. Thanks for sharing.

@MyClutteredGarage 13 күн бұрын

Thank you. Yes I’ve gotten much better at using the stump grinder. You might enjoy this video. Woodland Mills WG24 Stump Grinder in Action! MCG Video #214 kzfaq.info/get/bejne/od5oebCj27S1Z2w.html

@BackyardMaine 6 ай бұрын

Looks like fun Ed..

@bobpurs 7 ай бұрын

Nice Ed. Looks very well built and like every attachment will take a bit and you’ll be a pro.

@MyClutteredGarage 7 ай бұрын

Thanks Bob. I'm looking forward to using it a lot!

@timbervisions 7 ай бұрын

I have found that slip clutch to be bounds ahead of a sheer pin. I know it's a pain to deal with, but not having to replace sheer pins all the time, great time saver. I love my WG24 and have used it quite a bit. Even make a little side money with it. Enjoy!

@MyClutteredGarage 7 ай бұрын

Thanks! I surely would not want to be changing sheer bolts!

@georgecarter1725 7 ай бұрын

That is a great attachment Ed, can’t wait to see you use it more.

@dantabler9301 7 ай бұрын

Congratulations I’ve had one for several years and it is by far my most profitable attachment. Couple of pointers 1: check the teeth for tightness before and after each grind 2: prevent lateral movement of the grinder on the 3 point hitch 3: order 2 boxes of replacement teeth today. They can’t be sharpened. The folks @ woodland mills are the best of the best. There’s a learning curve, soon you won’t need to keep watching the grinder by looking backwards I use my rear view mirrors on my jd 2025

@MyClutteredGarage 7 ай бұрын

Thank you!

@GPOutdoors 7 ай бұрын

Hey good day Ed! You did a great job pal - especially for a first time with no line of sight. Pretty soon with expoerience you will be an expert. And those stumps and tripping hazards will be gone. Thanks for the great demo video. Cheers!

@MyClutteredGarage 7 ай бұрын

Thanks Gord. It’s going to get a lot of use! Now if you could just get a rock grinder, right? 🤣

@dannygoldman8216 4 ай бұрын

This is fantastic! A professional stump grinder is no different. Gotta take small passes. Look forward to seeing future videos with it.

@MyClutteredGarage 4 ай бұрын

Thank you!

@lonewolfFirearms 6 ай бұрын

I have this same unit now for a couple years and love it. It works great on my kioti ck3510se.

@PetersonFarmsofNashvillePFON 7 ай бұрын

Look forward to seeing more on the Grinder I’m sure you will learn some tips along the way Great Video and thanks for sharing 👍

@MyClutteredGarage 7 ай бұрын

Thanks Phil. There will be no shortage of stumps here!

@stevestock2439 7 ай бұрын

Great vid. I've had mine for a year now and really like it. Your right there is a learning curve. Thinking you may want to tighten your clutch a 1/2 turn on each fastener, it is too loose. There is a shear pin that is another level of safety too. I ended up getting an RV camera and mounted the camera under the grinder frame and that helps with visability. I like also engage the PTO at just above idle when the shaft is relatively level. then speed the throttle. Also found that rocks are not your friend and they will chip the carbide teeth. I pretty much grind no more than a couple inches below the grade no deeper. Also a hand held blower works great for blowing chips off the stump for visability and usually rake around the stump with a hard rake before i start just to get the obvious rocks away. Keep a 6 pack of extra teeth on hand. I rotate the upper teeth down to the lower position every now and again because the are used for cutting less. Enjoy! Steve

@MyClutteredGarage 7 ай бұрын

Great points! Thank you.

@garrytraynor1178 7 ай бұрын

Thanks for the video. Setting up the slip clutch was very helpful for me. I don't have a grinder yet but in the near future definitely. Great job on your first stump.

@MyClutteredGarage 7 ай бұрын

Thank you. Good luck!

@cajunaggie9815 7 ай бұрын

Congratulations! Definitely a learning curve, but if you tighten the side sway links, avoid large bites, work from far right to left, and learn to hear the sound it makes when you are in the sweet spot, you'll cut the time to do a stump that size down to a half hour or less including a stop to drag (or blow) the dirt off the remaining portion once you hit dirt. Visibility is an issue, and I look under my left shoulder (at the best cutting area 6-9 o'clock) to determine where I am relative to the stump, rather than over my right shoulder. Steering left and right as I move back and forth to move across the stump. I've taken out well over a hundred stumps large and small with it (finally quit counting...). Some definitely grind better than others. And I did get a backup camera too for when I am specifically grinding stumps as my project. For just clearing out troublesome small stumps when using my grapple to remove brush, The camera isnt' always mounted. But, practice, practice, practice.......... and try to avoid stones lol.

@MyClutteredGarage 7 ай бұрын

I'm sure it will get easier. Thanks much!

@keegantimber8571 7 ай бұрын

Congrats on the new toy Ed! 👍👍👍

@MyClutteredGarage 7 ай бұрын

Thanks 👍

@MikeHendleyArt 6 ай бұрын

I love the Woodland Mills products. I have a chipper. You can also add casters to the bottom frame which is great to store and move when off the tractor.

@MyClutteredGarage 6 ай бұрын

I love my WM chipper too!

@PeeksPeakHobbyHomestead 6 ай бұрын

Congrats on the awesome tool! That is nice! I also appreciated the Crocodile Dundee impression…😂👊

@MyClutteredGarage 6 ай бұрын

Ha! Thanks Mate!

@jaysizzlegman7621 7 ай бұрын

Does Woodland Mills make a knife sharpener? You should order one of those!😂

@MyClutteredGarage 7 ай бұрын

Haha. It was a mistake to grab that one off the shelf!

@watershedoverlook 7 ай бұрын

Nicely done Ed. For some reason, I seem to be experiencing deja vu! Seriously, congrats on the new purchase. As I suspected, I watched this video and thought "see, that's how it SHOULD be done"! 😉 Thanks for sharing your maiden voyage...very helpful and encouraging to see there is a learning curve. By the end, it looked like you had worked out a pretty good system. Look forward to seeing you hone your skills in the future (so I can learn how it's done! 👍). Still waiting for a daylight/weather window to try out mine. Kudos.

@MyClutteredGarage 7 ай бұрын

I’m sure we will learn from one another! Thanks, Chris.

@badgerlandturf 7 ай бұрын

It was a good unboxing and first use video. In my opinion and situation on 10 acres it was much more economical to rent a professional stump grinder ($275 per day) and do the 25 stumps I had to do. I see the tractor as being limited in sight as you explained and tedious to move the back and forth versus a self propelled rental unit. Now my chipper, best investment besides the tractor I made! I like to see non sponsored videos and you are paid to say something nice about equipment!

@MyClutteredGarage 7 ай бұрын

Thanks very much. I plan to grind stumps intermittently as I cut down trees, so a rental wouldn't really work for my plans. I'm sure it was nice to sue though! I love my chipper too!

@je1279 7 ай бұрын

It's certainly a beaut Clark. While I cannot justify the price for my needs, I do appreciate the review.

@MyClutteredGarage 7 ай бұрын

Thanks much! :)

@jjacres129 7 ай бұрын

That’s real nice ED I’m sure you’ll get a lot of use out of that and looks like fun to

@MyClutteredGarage 7 ай бұрын

Thanks Jeff. I'm looking forward to lots of use!

@whenworkisplay 7 ай бұрын

Good afternoon Ed. Congratulations on your purchase. A stump grinder is on my list. Nice honest demo. I used my chipper shipping crate to make a land plane. Have a good one, Ben

@MyClutteredGarage 7 ай бұрын

Thanks Ben. I know I'll use it a lot!

@davidano2554 7 ай бұрын

Going to get me one!!!! Thanks for the video

@MyClutteredGarage 7 ай бұрын

Thanks for watching. 👍

@AD-hr4is 7 ай бұрын

Get yourself a rear view camera and put the camera on a magnet so you can placed it where needed.

@thevmaxmanful 6 ай бұрын

I added a rear view cam to the PTO guard on my Mahindra 1635 and it was a game changer.

@druemathesius1848 Ай бұрын

What kind of camera was thinking same thing

@jaasx 7 ай бұрын

I've got the same one and been happy with it. yeah, my first stump took me 25 minutes. Now I'm down to a 5 for a similar stump. Watch out for letting the blade tilt back too far if you feed too fast. That reduces the engaged coupling length and I once got it so short it destroyed the female end. Take your time, be patient and it will get the job done. Do need to replace the teeth occasionally - got mine from Gabdon Industries and they seem fine. Also you seemed to engage the slip clutch alot so maybe check it's not too loose.

@MyClutteredGarage 7 ай бұрын

Thank you. I'm hoping to slip clutch works better after some use, like new brake pads. I'll definitly check the adjustment though. Seems like it slipped too much.

@georgecunningham4080 4 ай бұрын

Just bought mine should be here next week

@MyClutteredGarage 4 ай бұрын

Nice!

@GardenTractorBoy 7 ай бұрын

This looks like a very cool attachment. You provided some great information for anyone buying one of these. It was good to see it in action. Do you think installing a backing up camera would help with the visibility?

@MyClutteredGarage 7 ай бұрын

Thanks Joseph. I’ve seen a few people add cameras. It’s something to think about but I’m going to practice first to see if I can do it without.

@051biohaz 7 ай бұрын

Thanks for the review, I am really needing to remove quite a few stumps around my property and this might just be the ticket..:)

@MyClutteredGarage 7 ай бұрын

I'm looking forward to lots of use!

@RCAFpolarexpress 7 ай бұрын

Good Ed, Very Nice Steel Protective Cage that you can use for other welding projects 👍😇Yes You do Need To Sharpen That Knife Sir 🧐👍That is Truly An OUTSTANDING Canadian Forestry Product Maker👍👌💪😇Yes Follow the Direction and Specifications Is Very Safe Sir 🧐👍 Did you grease the PTO Shaft Sir 🤔OUTSTANDING FIELD DEMO TESTING SIR AND NICE TIPS TOO 👍🧐💪👌 Nice Puppy Dog 🧐😇👍Have Fun Sir Cheers 🍻

@MyClutteredGarage 7 ай бұрын

Thank you, David. Yes I was thinking a making a welding table from it!

@tedfelsberg5322 7 ай бұрын

We love our WG24, also. The dealer explained that our 21 hp kubota didn’t have the necessary ooomph, to spin that big cutter, so oh well…. We just had to go supersize it, and buy a bigger tractor. 😁 Just go slow with yours, and your wheel won’t completely stop spinning, so often. As that other tractor-guy up North - says, “Cheers” Ted in NJ.

@MyClutteredGarage 7 ай бұрын

Thanks, Ted in NJ!

@wvpolekat 7 ай бұрын

If you tighten the knob under the front of your seat you can slow down how fast it drops. That makes it easier to slowly lower heavy implements.

@MyClutteredGarage 7 ай бұрын

Good point. Thanks!

@markpotter8120 7 ай бұрын

people have been putting back up cameras and monitor to see

@MyClutteredGarage 7 ай бұрын

I've seen a few. I'll see how it goes before adding one. Thanks!

@MannistoCay 7 ай бұрын

Morning Ed, were your ears ringing yesterday? I was talking to Meghan from Woodland Mills yesterday about you and the live Monday nights. Nice work on the grinder, I use mine lots. You'll get used to the visibility and feel of it, the uses for it are quite diverse. Ive used mine for chewing on scrub on our property as well. Take care have a great weekend! 🌴🚜

@MyClutteredGarage 6 ай бұрын

Haha! Thanks!

@dantabler9301 7 ай бұрын

In the video your grinder was tilted backwards a good bit. Much better results when the wheel is plumb. Not bad for your 1st grind. ⭐️⭐️⭐️⭐️⭐️

@MyClutteredGarage 7 ай бұрын

Thank you!

@ronnieferguson5706 7 ай бұрын

Maybe adding a backup camera might help

@MyClutteredGarage 7 ай бұрын

Maybe!

@ellobo1326 3 ай бұрын

I was setting my WG24 up today. The clutch slipped as it should. I then tightened to the called for specs on the clutch springs (1.26”). When I later was torquing the cutter teeth, the clutch slipped with the pressure from my torque wrench on the tooth bolt. I would think it should take more force than that to make it slip.

@MyClutteredGarage 3 ай бұрын

I’d let it break in then check again. I think they wear in like a new set of brake pads.

@ellobo1326 3 ай бұрын

@@MyClutteredGarage Thanks

@TimeAfterTym 7 ай бұрын

I want a grinder!!!! I need a tractor first. Fun video was great watching

@MyClutteredGarage 7 ай бұрын

Thanks 👍

@rancin99 2 ай бұрын

Hi Ed. Great video and nice information on adjusting the slip clutch. I am waiting for another Locking Pin Kit for the PTO from Woodland Mills to connect the PTO to the WG24. After only using the machine for less than two hours, the PTO shaft came off from the grinder and the locking pin was gone. Woodland Mills said the nut must have vibrated loose but I had it on tight. I asked what the torque should be and they did not have one specified. I'm wondering if the locking pin could break from too much torque, so the next pin will have a second nut attached and blue loctite. I have not seen where anyone else had this issue of the pin missing. I'm looking forward to getting the WG24 up and running again. Thanks for the video.

@MyClutteredGarage 2 ай бұрын

Thanks! It’s a great attachment. WM has terrific customer service too!

@foxacoustics 2 ай бұрын

It would be nice if they made an adjustable skid that the wheel protruded from that only allowed it to take a 1/2" or 3/4" depth of cut per pass. Kind of like a wood jointer or planer.

@MyClutteredGarage 2 ай бұрын

I can see what you mean 👍

@margaretmatthews511 7 ай бұрын

Hi Eddie, You referenced 2 movies in the first 30 seconds 😂!!! You are a great teacher! Gosh, it"s A LOT of work to set-up your stump grinder 😮. I am excited you now own a stump grinder...thats a handy piece of equipment! How large of a stump can you grind? Safety question: should you wear goggles? I do enjoy your videos!!! One more question: are you getting a larger tractor??? Comment: you didnt say the price 😮

@MyClutteredGarage 7 ай бұрын

Haha, good catch, mate! I think I’d be comfortable up to 16” diameter stumps.

@hemtt0112 6 ай бұрын

Great video, I also have a chipper. Maybe next time to be safer, run the exit stuff away from the house. Would hate to see a rock go flying..

@MyClutteredGarage 6 ай бұрын

One of my favorite attachments 👍

@StubProductions 5 ай бұрын

You ain’t joking about being a dull knife! Lol

@MyClutteredGarage 5 ай бұрын

🤣🤣🤣

@Dan-oz4qb 19 күн бұрын

Nice grinder. Kind of disappointing it came from the factory without proper torque on everything.

@xipkore 14 күн бұрын

from what i've seen from woodland mills product videos, you gotta lower it tiny bit at a time.

@MyClutteredGarage 14 күн бұрын

That’s what I’ve found too. 👍

@chevheaded4599 7 ай бұрын

Quite the workout torquing all those bolts! CONGRATULATIONS on the new implement. It's on my short list... But like you, I have to save up. 😊

@MyClutteredGarage 7 ай бұрын

I had not doubt about buying one, but I also had no money. Worth saving for!

@RossOnTheLand 7 ай бұрын

Hello Ed! That looks like a great product, can you push backwards over stumps or do you find pulling fwd over them easier?

@MyClutteredGarage 7 ай бұрын

Thanks Ross. There are no teeth on the back side of the flywheel. So it’s forward only. 👍

@richardbritton5280 7 ай бұрын

Nice Ed 👏👍💪🏆🏆👴🐕🚜🦌🤠😎🙏🙏

@MyClutteredGarage 7 ай бұрын

Thanks!

@ernestkooistra1559 7 ай бұрын

I could have done that with my lawn mower. Over several years, and maybe mowers. ✌

@MyClutteredGarage 7 ай бұрын

Haha. Can you grind rocks too?

@ernestkooistra1559 7 ай бұрын

I may not have the time for that...@@MyClutteredGarage

@davidmartin7660 7 ай бұрын

Nice job Ed. Not sure if it would help or not but how about a backup camera???

@MyClutteredGarage 7 ай бұрын

I've seen some folks do that. Something to consider, but I want to get used to using tit without, first. Thanks!

@user-yl8sy8fn1c 6 ай бұрын

I think it's one of those things I'd rather rent for the day (or two) and not have to store or care for...From experience

@MyClutteredGarage 6 ай бұрын

I’ll be cutting trees and grinding stumps as I go, throughout the year(s) so buying it made more sense for me. Renting it just paying someone is a good option for some though. Thanks for watching 👍