Woodturning - $1,000 Art From The Forest Floor !!

Рет қаралды 999,064

9 ай бұрын

Welcome to this weeks woodturning video:
Woodturning - $1,000 Art From The Forest Floor !!
In this woodworking video I use a woodturning lathe to turn a blank made from scavenged twigs and epoxy resin into a decorative hollow form.
If you find these video’s a good source of entertainment, I’d appreciate you like, share and subscribe.
Thanks for watching.
Website - www.jackmackwoodturning.com
Facebook - / jackmackwoodturning
instagram - / jackmackwoodturning
#woodturning #epoxy #asmr #wood #resin #entertainment #resinart #vase #woodworking

Пікірлер: 290

@JackMackWoodturning 6 ай бұрын

For Epoxy Resin go to Www.houseofresin.com

@SimpPro101 9 ай бұрын

Man you found a bucket, epoxy AND a lathe on the forest floor??? Amazing!!!

@davode76166 9 ай бұрын

And he found the experience and the talent on a tree in the middle of the jungle

@gladystan1 9 ай бұрын

😂😂😂

@wvello2265 9 ай бұрын

😂😂

@JackMackWoodturning 9 ай бұрын

Just the twigs

@mariasusan3491 9 ай бұрын

@@davode76166😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😊😅😅😅😅😅😅😅😊😅😅😊😅😊😊😊😅😅😅😅😊😊😅😊😅😅😅😊😊😅😊😊😅😅😅😅😅😊😊😅😊😅😅😊😅😊😅😊😊😅😅😊😊😅😊😊😅😅😅😅😊😅😅😅😊😅😊😅😊😊😊😅😊😅😊😊😅😅😅😅😅

@myamaryca1015 9 ай бұрын

5,6, pick up sticks, 7,8, lay them straight, 9,10, you’ve done it again. 👏

@JackMackWoodturning 9 ай бұрын

😆👍🏻

@bunnyblaine1492 9 ай бұрын

Neither easy. Or simple and one must work with expensive equipement!! Great job!

@jewelz6506 9 ай бұрын

Wow, wasnt sure about the black but that is gorgeous!

@JackMackWoodturning 9 ай бұрын

Thanks jewelz

@rogerwoods1351 9 ай бұрын

short and sweet,, i love the shape and colour of this piece

@JackMackWoodturning 9 ай бұрын

Cheers roger 👍🏻

@rogerwoods1351 9 ай бұрын

@@JackMackWoodturning you're welcome

@fiberotter 9 ай бұрын

Fascinating what you can do with sticks from the yard.

@JackMackWoodturning 9 ай бұрын

Glad you enjoyed it

@joelsolo302 9 ай бұрын

Am I the only one getting a strong pickle jar vibe from this turning?

@PartanBree 9 ай бұрын

My first thought was bananas, but you have a point!

@TheParkAttendant 9 ай бұрын

As I have been going through your old videos, I have really developed a respect for your skill as a wood turning artist. When I see a new one come up, I always know it's going to be good.

@JackMackWoodturning 9 ай бұрын

Thank you. So glad you are enjoying my work 👍🏻

@natashafranko4951 9 ай бұрын

That's really clever and beautifully finished at the end. 😊

@jonny555ive 8 ай бұрын

Beautiful sliced pickle vase' 👍👍

@safepnc 8 ай бұрын

Absolutely wicked!

@lolcec81 8 ай бұрын

Комментарий в поддержку канала и ролика, а также труда мастера

@vinceianni4026 9 ай бұрын

Hello mister Jack beautifully done good job

@JackMackWoodturning 9 ай бұрын

Thanks buddy

@terrywhite9017 9 ай бұрын

Good morning Jack, NEAT, I like the way you left the lip on top instead of cutting it down flat and making a more common bowl look. GREAT JOB. 👍. Love you and love to all.

@garettbrea9165 9 ай бұрын

Beautiful work.

@lyndadennin7471 9 ай бұрын

Way beautiful!

@JackMackWoodturning 9 ай бұрын

Thanks buddy

@siding8 9 ай бұрын

Beautiful!

@JackMackWoodturning 9 ай бұрын

Thank you

@rona8663 9 ай бұрын

Very interesting piece Jack, thank you for sharing.

@JackMackWoodturning 9 ай бұрын

My pleasure Rona.

@lindapoindexter403 9 ай бұрын

That’s gorgeous

@JackMackWoodturning 9 ай бұрын

😊👍🏻

@David-jn4fx 9 ай бұрын

Jàck Mack creations 🤩

@MEGAMIGA 9 ай бұрын

I love this one!

@JackMackWoodturning 9 ай бұрын

Thanks buddy

@MEGAMIGA 9 ай бұрын

@@JackMackWoodturning 😁

@sherrieburks4739 9 ай бұрын

Lovely!

@johncraggs3658 9 ай бұрын

Superb craftsmanship and so unique. Thankyou for sharing.

@DotGino 9 ай бұрын

OMG MAGNIFICENT beauty

@JackMackWoodturning 9 ай бұрын

Thanks dot

@suzanneyoung6273 9 ай бұрын

Very nice. Love the different grains in the wood. 😮🇦🇺😊

@thomasevora863 9 ай бұрын

iyj

@daviebevan 9 ай бұрын

First time I have watched anything like this. Inspirational. Thank you

@JackMackWoodturning 9 ай бұрын

Thanks David. I’m glad you enjoyed it. I have over 150 videos on my channel and I publish a new video every week. Plenty for you to watch and be inspired by, especially if you hit subscribe so you don’t miss my new stuff. 😉 Thanks for watching.

@daviebevan 9 ай бұрын

@@JackMackWoodturning I've subscribed. Looking forward to seeing some Wood Turning "art"

@JackMackWoodturning 9 ай бұрын

Good to have you on board buddy 😉👍🏻

@paintcandan5972 9 ай бұрын

by far my favorite form i’ve seen you do. just a really satisfying shape imo. incredible work as always

@JackMackWoodturning 9 ай бұрын

Thanks buddy

@user-by3mm4qp4w 9 ай бұрын

Very Phil Moulthropesque--awesome work!

@laurazakrzewski 9 ай бұрын

Wow love the shape Jack. It turned out cool.

@baijusaimon 9 ай бұрын

Wow!!

@JackMackWoodturning 9 ай бұрын

Good wow? Bad wow ???

@baijusaimon 9 ай бұрын

@@JackMackWoodturning Good wow😊 for sure!

@TEAKWOODJAVA 9 ай бұрын

Amazing❤❤

@LukeTheJoker 9 ай бұрын

Love this one, very nice.

@JackMackWoodturning 9 ай бұрын

Cheers luke

@harlem_nerd5191 9 ай бұрын

Frigging Awesome 👍🏾

@JackMackWoodturning 9 ай бұрын

Thanks buddy

@mrkkitson 9 ай бұрын

Nice!!

@raz8536 9 ай бұрын

Jack that is simply better than any decoration I've seen u are doing great ❤

@johnoldonekanole602 9 ай бұрын

LOOKING GOOD!

@moniquekelsey7856 9 ай бұрын

Stunning ❤🇦🇺

@barry.w.christie 9 ай бұрын

Very simple make up, but it looks fantastic ... mind you, everything you do seems to look fantastic 👍

@amandatallis9875 9 ай бұрын

Hi Jack what a magnificent and unique vase thanks for a great video

@grammybear4226 9 ай бұрын

Ooh pretty!

@colinmacdonald404 9 ай бұрын

Thanks 👍

@keithspencer5213 9 ай бұрын

Just wow 😊

@elizabethrogge7908 8 ай бұрын

I want one!

@charlesnkanga638 9 ай бұрын

Impressive!!!🔥🤩👏👏

@Ms.Cats-if.you.please 9 ай бұрын

♥️♥️♥️

@stevenseverance3692 9 ай бұрын

Has almost a "Zebra 🦓" like "Appearance". Perfect for an "African/Jungle " look. I like it. Sincerely Yours 🤠 Mr Severance, "The Cake 😋 🍰🎂 🥳🎉 🎊 Man".

@JackMackWoodturning 9 ай бұрын

Are you sure you’ve seen a zebra before?

@stevenseverance3692 9 ай бұрын

@@JackMackWoodturning I saw a Jungle themed Bedroom at a "Home Decor Show" at a local "Home Design/ Furniture Show" right here in Las Vegas at one the "Convention Centers". Sincerely Yours 🤠 Mr Severance, "The Cake 😋 🍰🎂 🥳🎉 🎊 Man".

@jpungello 9 ай бұрын

$1000? There is a sucker born every minute

@JackMackWoodturning 9 ай бұрын

What do you mean?

@mark-ut8ft 9 ай бұрын

Your ability to turn sticks into a work of art is amazing.

@LSK77_ 7 ай бұрын

Id love to take pictures of your work with my art they would so complement eachother. ❤ So gorgeous

@m3rrys0ngstr3ss 9 ай бұрын

I was skeptical about the black resin at first - but I should have known you had the right idea!

@JackMackWoodturning 9 ай бұрын

Haha, I do make mistakes, you guys just don’t see them 😆

@anamiller5778 9 ай бұрын

Your working is amazing! You are so creative.

@1954JDR 9 ай бұрын

That is absolutely beautiful. I'm impressed that you hollowed it without the aid of a lasser. I bought an expensive lasser system to be able to make hollow forms.👍👍

@JackMackWoodturning 9 ай бұрын

You mean for wall thickness ?? I just use calipers. Tells you the wall thickness when you can touch or see both sides. 👍🏻

@cristinalaterza9980 8 ай бұрын

Cara, eu gosto muito de você!

@pattigolden1 9 ай бұрын

Very cool.

@alessandroalberto6431 9 ай бұрын

Beh, che dire ancora ? Molto bello !!!

@michaelr138 9 ай бұрын

Wunderschön 🤩🤩

@JackMackWoodturning 9 ай бұрын

😊

@SMcCaskill 9 ай бұрын

Nice!

@thegoldennugget59 9 ай бұрын

Nice you made a wood ball with a hole in it,but I do like the colour and finish

@JackMackWoodturning 9 ай бұрын

It’s fully hollow my friend, 5mm wall thickness. Light as a feather , like porcelain. Not a ball with a hole in it 😆

@maddieadams75 9 ай бұрын

Amazing piece of art ❤

@ronaldlester2011 9 ай бұрын

It’s a piece of something for sure

@JackMackWoodturning 9 ай бұрын

@ronaldlester2011 thanks buddy.

@maddieadams75 9 ай бұрын

@@ronaldlester2011 is this a jealousy comment. Seems I a struck a nerve. I’ve never understood why people watch creators, just to antagonize them, your mother or father didn’t love you enough. Help me understand rudeness

@ramykhalaf8171 9 ай бұрын

Amazing work and high level of craftsmanship, the question is, how easy is it to sell it for 1000$?

@JackMackWoodturning 9 ай бұрын

This was a commissioned piece. So paid for before I made it.

@brianmills6168 9 ай бұрын

Awesome

@jimdaly5077 9 ай бұрын

Hi👍top job 👍🐝🌞

@buddyboyer2274 3 ай бұрын

It’s just unreal

@JackMackWoodturning 3 ай бұрын

In a good way?

@darrelltate3456 9 ай бұрын

I can't stop seeing pickles tho

@JackMackWoodturning 9 ай бұрын

Hahaha 🤣

@madeleinegombert661 9 ай бұрын

BEAUTIFUL AS ALWAYS.

@JackMackWoodturning 9 ай бұрын

Much appreciated

@andersontenca1749 8 ай бұрын

Woww... Your work is wonderful. Congratulations! By the way, what lathe do you use? Hugs

@JackMackWoodturning 8 ай бұрын

Thanks buddy. This is the vicmarc vl300

@YvonneWilson312 9 ай бұрын

Another stunning piece - it's so beautiful.

@MrFoxRobert 9 ай бұрын

👋👍

@jannaalley6127 9 ай бұрын

It looked so much bigger when you started--then I saw how big it really was when you applied the cool shiny finish. I like that you didn't hollow it out and kept the inner wood visible from the top. Didn't need a color other than black.

@JackMackWoodturning 9 ай бұрын

Thanks. I did hollow it completely, it’s 5mm thick walls all over 😊👍🏻

@aircap 9 ай бұрын

Another incredible piece! Gorgeous

@MADGuappo 9 ай бұрын

Excellent work. Im really, really curious which resin you're using that you can turn it in 24 hours. Ive tried minimum cure times and extended cure times on my lathe and had not so much luck. Chip out really badly etc. Im turning with really sharp tools too and curing in a pressure pot.

@patdavis1468 9 ай бұрын

Another gorgeous piece of art❤️👍🏻

@l.n.6386 9 ай бұрын

Mr. Jack, I still get hypnotized watching you create. May I ask you, what is it that you use to put the shine on your art? Just a curious thought. I'm sure that it's quite different than using wood shavings to burnish some pieces, a bit different. Shellac is from insect "material", right? I'm only wondering if you make your own finishing products from scratch, or do you purchase whatever that product you use to make the shine glow like you do? Thank you kindly for your reply. An old fan, grin.😊

@user-km8wj7yt7k 5 ай бұрын

stunningly beautiful. what was the substance you actually used to make it so shiny?

@scotiawideproductions3123 9 ай бұрын

Really cool !...but I'm wondering about the moisture

@user-kd3xl6dg5q 9 ай бұрын

This is definitely a beautiful piece, something different from the norm and beauty is in the eyes of the beholder keep going

@COCOAUB 9 ай бұрын

Man I love your creativity your amazing

@fastjazz 9 ай бұрын

Yeah well, another one of those you can do in your sleep…looks great but I’m thinking $100

@Kinokoumori 8 ай бұрын

He was already paid 1000 by the person who commissioned him to make it so 100 is nowhere close, bud.

@fastjazz 8 ай бұрын

@@Kinokoumori yo bud, it’s still only worth $100 since he can do it in his sleep with eyes closed, so other than overpaying by $900, you have no point to make. Bud.

@Kinokoumori 8 ай бұрын

@@fastjazz As an artist myself, it saddens me to see how little you value our time, effort, and talent. You clearly don't know how artists price their works or how much something like this is actually worth. You're not just paying for the finished piece, you're paying for the equipment used, as well as the time spent learning the craft while NOT being paid. For the same reason that a 2D Vtuber model might go for thousands of dollars, despite the fact that someone as uneducated as you might think it's "just a drawing", something as unique and beautiful as this could EASILY go for twice the amount the commissioner paid, so really, the price Jack quotes them was more than fair. Maybe you should take a moment to appreciate just how much of a role art of all forms plays in our modern society, to give yourself a better idea of just how valuable our work really is.

@fastjazz 8 ай бұрын

@@Kinokoumori I’m sorry to disappoint you but I am far beyond well acquainted with all of it and it’s worth what I’ve already noted.

@Kinokoumori 8 ай бұрын

@@fastjazz r/Iamverysmart

@shermnduke 9 ай бұрын

Be careful where you gather. I was almost fined for collecting a few pieces of driftwood. The Park Ranger said it required a permit.

@lindagoldberg2325 9 ай бұрын

A stunning piece. How long did you dry the branches before turning them?

@JackMackWoodturning 9 ай бұрын

3 hours in the oven on 140c Then left on the kitchen bench over night… I cut them to length on the bandsaw while they were green and then on the video you see my put them straight on my workbench, that’s the night they were taken home and dried.. the magic of tv 😆

@Ipushedabutton 9 ай бұрын

Beautiful. It's like those Greek black-figure amphorae, in reverse.

@TheAmericanX 9 ай бұрын

I i'm not no young buck like the rest of u wood turners

@JackMackWoodturning 9 ай бұрын

What do you mean?

@TheAmericanX 9 ай бұрын

@@JackMackWoodturning

@JackMackWoodturning 9 ай бұрын

You’ve lost me fella

@IernaCalling 9 ай бұрын

Was that more epoxy you coated it at the end ? Nice work

@JackMackWoodturning 9 ай бұрын

Yes. Alumilite amazing clear cast. From Www.houseofresin.com

@billhatcher2984 9 ай бұрын

I love that finish you can really make it shine and it's probably tuff as nails 👍

@cookiescoop6065 9 ай бұрын

Very beautiful piece sir have a great weekend ✌️

@pattymiller5171 9 ай бұрын

That was an awesome video! I bought a nice piece once made by a friend, now I finally know how he did it, LOL! 😊

@natashiaanderson3666 9 ай бұрын

Pickles ... in the pickle jar.

@JackMackWoodturning 9 ай бұрын

😆

@DougMilleratWoodSpunRound 9 ай бұрын

Pretty piece. The classic shapes never go out of style.

@TheElpmes 9 ай бұрын

Great work great to watch. How much would/did you sell a piece of art like this ??

@JackMackWoodturning 9 ай бұрын

It was a commission piece, one of a pair, I made the other one a few years ago and the customer wanted it to become a pair. The price was £795 per piece, hence the title $1,000

@KonstantinBuinov 9 ай бұрын

Nothing personal, but just my feeling: first 10 videos I've seen with such a wood turning masterpieces caused WOW! effect, but later ones are repeating of the same scenario: find a bunch of stiff stuff, fill it with a contrast colour resin, turn it into bowl or vase, cover with a glance coat wasting 90% of material. I understand specific of wood turning and lathe in general, but it's such huge waste for a vase (they are great from a glass) or bowl (steel, ceramic or glass work perfect for that). I think it's time to create something different with the same technique or with less waste. Just as a side note: I'm not a master of wood turning, I only know basics of metal and wood working on a lathe and have basic hands-on skills in that. Thank you for your deep and wide skills of wood turning and processing in general, however what do you think about applying them to something really new and rather useful/practical than decorative? Thank and regards, Konstantin

@JackMackWoodturning 9 ай бұрын

I don’t produce any waste from my work. How many of my videos have you watched ?

@ultrawoody1968 9 ай бұрын

It looks great...whats the wall thickness? Looks beautiful even if its a bud vase

@JackMackWoodturning 9 ай бұрын

Thanks. Wall thickness is about 5mm (15mm on the base)

@ultrawoody1968 9 ай бұрын

@@JackMackWoodturning that's impressive....would make it an expensive piece....Great work

@JackMackWoodturning 9 ай бұрын

Thanks, When you say bud vase , what do you mean ?

@mechantics 9 ай бұрын

@JackMackWoodturning a bud vase typically has provisions for supporting multiple flower blossoms in a shallow vessel without help from the relatively long stems typical of cut flowers. I am not sure this falls into that classification

@ultrawoody1968 9 ай бұрын

@JackMackWoodturning sorry I didn't reply....bud vase small piece of wood with a test tube in..for a flower or cutting....simple quick...that's all

@natescarvingcreations2978 9 ай бұрын

Beautiful work my friend, I really enjoyed this video

@TheLastLevitan 9 ай бұрын

I hope you're wearing a respirator. Microplastics in the air ain't no joke

@johnhedge9328 8 ай бұрын

I'll buy 10

@yulonndaleefisher8087 9 ай бұрын

Be great if they would explain exactly what they are doing and materials using.

@JackMackWoodturning 9 ай бұрын

You can just ask specific questions if you’d like to know. What do you want to know ?

@Annie59Oakley 9 ай бұрын

Just beautiful! ❤️

@David-nj8cq 9 ай бұрын

How do you get the epoxy out of the bucket so cleanly. Mine always sticks, but I don’t have a pressure pot, maybe that’s it.

@JackMackWoodturning 9 ай бұрын

That’s not it 😉 I used machine grease lightly coated on the inside of the bucket. You can buy all kinds of demolding agents but machine grease is cheap and is perfect for the job, plus it keeps my roller shutters moving smooth so I always have it on hand 😉

@user-bi8op8sv9q 9 ай бұрын

First time watching your skill as an artist. Love the end result, but I cannot stop thinking about the waste from this turning. What do you do with it? 😊 wood is of course organic, but epoxy and resins - harmful to environment.