Woodturning a log, into a bird feeder, in one piece

Рет қаралды 7,464

Glenn & Liza Teagle Woodturning & Carbide Chisels

8 ай бұрын

In this video I am turning a bird feeder, from a log, in one piece.
To buy any of my Carbide tools or cutters visit my website;
www.ukwoodcraftandcarbidechisels.co.uk
Thanks for watching.
Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.

Пікірлер: 37

@mnp1964 5 ай бұрын

Very nice I thought you were going to Hallow out the bottle part to but you fooled me it really looks good nice work Blessings

@glennteagleofukwoodcraftca5308 5 ай бұрын

Thanks Wade. Blessings to you too.

@alexandermcconnell7816 5 ай бұрын

Super job Glenn Super demo super controll. Alex n.ireland.

@glennteagleofukwoodcraftca5308 5 ай бұрын

Thank you Alexander. Glad you liked it.

@sandiekelley8513 26 күн бұрын

Really sweet feeder. One thought, with the snow blowing, one can add some clear plastic like from a water bottle, around the middle part to keep some stashed and dry feed. With openings at the bottom of it to let it spill out and for when refilling.

@glennteagleofukwoodcraftca5308 26 күн бұрын

Thanks for watching. Glad you enjoyed the video.

@colincambridge2066 6 ай бұрын

Glen and Lisa it is a Pleasure to watch a master at work Great project thank you for sharing your knowledge with us

@glennteagleofukwoodcraftca5308 6 ай бұрын

Hi Colin. Thank you for your feedback. It really is appreciated. Glad you are enjoying watching our videos. We enjoy making them. Happy turning. Toodle pip for now. Glenn & Liza

@alangibb3100 8 ай бұрын

Glenn and Liza that wee bird feeder turned out really smart well done

@glennteagleofukwoodcraftca5308 8 ай бұрын

Thank you Alan.

@royhoward2785 7 ай бұрын

@ian7583 8 ай бұрын

Hi there think ur a awesome wood Turner m8 thanks Ian

@glennteagleofukwoodcraftca5308 8 ай бұрын

Thank you Ian. Very appreciated. Glad you are enjoying watching the videos.

@oldncarvingJohn 8 ай бұрын

This is amazing. Very posh. 😂❤❤

@glennteagleofukwoodcraftca5308 8 ай бұрын

Thanks John. Already out for the birds in the garden.

@joesuelter1636 5 ай бұрын

Just subscribed, great content

@glennteagleofukwoodcraftca5308 5 ай бұрын

Welcome to the channel Joe. Glad you are enjoying the videos. You only have a few to catch up on. Lol 😄😂🤪We've now got 376 videos. All full of tips and entertaining too. Glenn & Liza

@Blitz-yn4kf 8 ай бұрын

grats on 4k subs. I subscribed when you was fairly new to you tube and have watched 90% of your vids and you have taught me so much. I bought some carbides and struggled on how to use them Nobody I watched on using carbnides gave the same info you did. I also learnt a lot on using trad tools as well and my turning has improved so much with both types of chisels that I am a lot more comfortable in the work that I do. Still got a long way to go to get really good but am getting there slowly..... Thanks again guys and here's to the next 4k subscribers 👍👍👍👍

@glennteagleofukwoodcraftca5308 8 ай бұрын

3k at the mo. Looking to get to 4k. So glad we have been able to help you in your turning. That's what the channel is about, having a little fun along the way. Thanks for all your support and comments along our journey. We really appreciate them. Toodle pip for now. Glenn & Liza

@garym518 6 ай бұрын

Hello I have recently found your channel and are enjoying it very much. One thing I noticed is that you always make a point of fully closing any chuck before removing it. Is there a reason for this or are you just being tidy. Thanks for your time.

@glennteagleofukwoodcraftca5308 6 ай бұрын

I do have a bit of an OCD problem but I need to fully close the chucks so they hang on the hooks I made for them.

@user-xf3ke1ur8p 7 ай бұрын

Great job, what was the oil you were sanding with?

@glennteagleofukwoodcraftca5308 7 ай бұрын

Thank you Gordon. Chestnut Finishing Oil.

@michaelbrennan6582 6 ай бұрын

Hello Glenn and Lisa. Really enjoy your videos. Can you tell me what brand of headgear/ face shield you use?

@glennteagleofukwoodcraftca5308 6 ай бұрын

Hi Michael. Glad you are enjoying the videos. We did a video on this already. Check out the link: kzfaq.info/get/bejne/frijnrB6v6vOZHk.html

@HerbD-fg8dy 8 ай бұрын

Glen and Lisa, I watch your videos regularly and enjoy them and the knowledge that you share. Thank you for sharing. I have a question on a subject that I haven’t heard you say much about. How in the world do you manage to keep your shop so clean? My lathe is out in a small part of my garage. I don’t have a turning project to work on but maybe once a week or so if I’m lucky and I manage get shavings and sawdust all over my garage. I actually do clean up every time after I turn off the lathe for the day, even if the project is not finished yet. I have a battery powered leaf blower and a dust collector that I use during sanding and to clean up the shop with and I still find wood chips and dust everywhere. You appear to have quite a clean shop. And you seem to be turning something almost every day. I understand that the floor has to get messy but your tool holders and shelves are all quite clean. I was just wondering what you guys do to keep your shop looking nice and clean? I’m currently watching the bird feeder video and I have some logs that would be perfect for making a feeder like that. So I look forward to seeing you finish it.

@glennteagleofukwoodcraftca5308 8 ай бұрын

Hi Herb. Thanks for your support in watching our videos. I just vacuum it off every time I've finished for the day. How did you find the bird feeder? I was very pleased with it. It's now hanging in the garden with nuts in it waiting for the birds to take them.

@Blitz-yn4kf 8 ай бұрын

Herb I use this to clean up Does a really good job of both clearing shavings in hard to reach places and into spaces you can not see 😁🤣😁

@HerbD-fg8dy 8 ай бұрын

Hi Glen, Thanks for the reply. I do vacuuming every time after I’m finished for the day, guess I’ll just have to do a better job. The bird feeder turned out great, really enjoyed watching you make it. Great tip on oiling the wood as you go to help prevent cracking too. I have a lot more green wood than I have dry wood so I’m going to try that with some of my other projects.

@glennteagleofukwoodcraftca5308 8 ай бұрын

@@HerbD-fg8dy Yes, me too. Loads of wet wood, after they cut down the Weeping Ash down the road. Let us know how you get on.

@josepaulo710 7 ай бұрын

😂🇵🇹👍

@mikedaigle1582 8 ай бұрын

Beautiful piece! May have to give one a try. What are you brushing on before sanding?

@glennteagleofukwoodcraftca5308 8 ай бұрын

Thanks Mike. Yes, give it a go. Let us know how you get on. Chestnut finishing oil, but any oil will be fine.

@alanpywell838 6 ай бұрын

What make of sharpening jig do you use Glen

@glennteagleofukwoodcraftca5308 6 ай бұрын

Hi Alan, depends on what gouge. Check out these videos on how I sharpen them. kzfaq.info/get/bejne/epmTZs2VnN3dimg.html kzfaq.info/get/bejne/rL9zgpaHy67RoKM.html kzfaq.info/get/bejne/nN-IY9ed27fdaWQ.html