Woodturning a Potbelly Bowl with Chevron Ring

No video

Woodturning a Potbelly Bowl with Chevron Ring

Рет қаралды 48,414

5 жыл бұрын

I wanted to do a walnut potbelly bowl with a special feature ring. I made alternating chevrons from strips of padauk, purpleheart and yellowheart and it turned out pretty good. But, I wish that I had made the feature ring slightly taller. I used five 3/8" strips. If you attempt this design, I would recommend using at least seven strips at a minimum. I think you'll be happier with it.
As always, thank you for watching. If you haven't yet, please help my channel grow by subscribing. Thank you. I hope you enjoy my videos. --Dan
**********************
Design Software:
woodturnerpro.com
Turning Tools:
carterandsonto...
www.carterprod...
www.robert-sor...
Lathe:
www.teknatool....
Wood Suppliers:
www.bellforest...
www.cheswoodsal...
Turning Supplies:
www.titebond.com/
www.woodturner...
www.mylands.co...
yorkshire-grit...
Misc. Equipment:
- fantastic threaded brass inserts for urns.
www.rockler.com/
www.woodcraft....

Пікірлер: 83

@gwynethbradshaw7257 4 жыл бұрын

I was gifted this bowl for Christmas! I love being able to see the time that went into its creation! Thank you Dan!!!!!! 😁

@LivingstonBrothersWoodcraft 4 жыл бұрын

Thank you Gwyneth!!!

@jennifertalwar6099 4 жыл бұрын

Speechless, wow. I love how you also incorporate safety into each video and tips.

@Andreas_Achleitner 5 жыл бұрын

You are also addicted in segmented turning as I am. In a few weeks I get my new lathe and will start again with that. The bowl is really cool!

@stewartmcmanus3991 4 жыл бұрын

Elegant.

@peterramaekers3037 5 жыл бұрын

very, very nice bowl. Piece of art!!

@williamellis8993 5 жыл бұрын

Another beauty, Dan. The shape and feature ring compliment each other well.

@georgemccombs5070 5 жыл бұрын

All I can say is WOW WOW WOW, beautifully done.

@LivingstonBrothersWoodcraft 5 жыл бұрын

George, as always, thank you very much for all of your kind comments on my art. It is very much appreciated, sir.

@AllenOxendine 4 жыл бұрын

Beautiful Piece

@mgjkoehler 5 жыл бұрын

Sir, not only do you do amazing work, you have excellent taste in music.

@chandarussell 4 жыл бұрын

Stunning piece.

@trikermansbike 5 жыл бұрын

Very nice 👍 love it.

@jasonwyliie8022 5 жыл бұрын

Incredible piece.

@moonwoodworks4607 5 жыл бұрын

That is a very beautiful vase. The detail is outstanding.

@sunshine4ever804 4 жыл бұрын

That is so beautiful! That would absolutely look fantastic in my southwest home! Nice job Dan!👍😁

@MoonpieCreations 4 жыл бұрын

Fantastic!!!

@kobiekaasjager4822 5 жыл бұрын

Dan each segmented bowl or piece you make is fantastic and stunning breathtakingly beautiful. This one is wow outstanding.

@LivingstonBrothersWoodcraft 5 жыл бұрын

Kobie, you are very kind. Thank you.

@gsxxxrrr 5 жыл бұрын

Lovely piece of work Dan.

@KonaSitkaRose 5 жыл бұрын

Good gracious, this is marvelous!

@lyndacarter5090 5 жыл бұрын

Omg, this is so beautiful! It’s like a mosaic in wood. You have amazing skills!

@carolriley569 5 жыл бұрын

Another gorgeous bowl!

@garythomas6866 5 жыл бұрын

Another beauty Dan awesome, thanks for sharing.

@petricabistricean1806 2 жыл бұрын

super tare 💋💋💙

@donfillenworth1721 5 жыл бұрын

Very nice! I like your method of making the feature ring. Thanks for sharing.

@user-pn8mr1uz6m 4 жыл бұрын

Очень красивая работа!!!Very,very nice!!!

@sharlenejohnson144 5 жыл бұрын

You are so talented

@jarmstrong2843 5 жыл бұрын

Ouuuuuuuutstanding!!!! Ya done good! Impressive & beautiful work.

@Ronalcock1 5 жыл бұрын

Absolutely beautiful, love your work.

@georgebrill3072 5 жыл бұрын

beautiful bowl. You nailed it.

@julienlamotte7131 5 жыл бұрын

Bonjour dan, quel travail, encore une fois c est magnifique, je me régale à regarder vos vidéos, bravo

@markb8954 5 жыл бұрын

Nicely done.

@pastorlarrypotts8289 5 жыл бұрын

Outstanding!

@oneshotme 5 жыл бұрын

Looks great and beautiful Enjoyed and gave a Thumbs Up

@oneshotme 5 жыл бұрын

Subscribe Today Also

@nunziabiscotti2294 4 жыл бұрын

Bellissima.

@jorgeantonioramirezromero5598 5 жыл бұрын

you´re awesome man....congratulations

@fredwienbarg5051 4 жыл бұрын

You, my friend, are a true artist! As a new turner, I am learning so much watching these. I wish that you would put a little more information in. Like what you are using for finishing and a description in the below section. Thank you.

@LivingstonBrothersWoodcraft 4 жыл бұрын

Hi Fred, thank you for watching.

@jacobworkman6455 5 жыл бұрын

Gorgeous 👍

@chandarussell 5 жыл бұрын

Lovely.

@tonymathesonxvs11001 5 жыл бұрын

Thanks for posting and sharing Dan. Thanks for the tip regarding the amount of rows on the feature ring. Also regarding the Rockler sled, I built a 'wedgie sled" plans and idea courtesy of Jerry Bennett. He has an amazing set of segmented videos. Anyway, thanks again and all tips are gratefully received. I'm about to start my first segmented vase, 24 rows @16 segments per row. I wont be using too fancy a wood yet though, gonna build the confidence up. and see how it turns out. I've subscribed and given the thumbs up, well deserved. Good luck with your new channel. Regards and best wishes. T.

@LivingstonBrothersWoodcraft 5 жыл бұрын

Thanks so much Tony. Good luck with your first segmented vase. Send me a picture!

@andrewbutler1609 5 жыл бұрын

great stuff Sir, I also like the cheat sheets you provide it makes it easier for me to copy you :)

@LivingstonBrothersWoodcraft 5 жыл бұрын

Andrew, on my last piece, make the feature ring taller. I think you'll like it better that way.

@natalierivas415 5 жыл бұрын

No me canso de ver. Me encanta 😀

@LivingstonBrothersWoodcraft 5 жыл бұрын

Gracias Natalie.

@cosmovellucci5506 5 жыл бұрын

Complimenti ottimo lavoro 👍 ammirevole

@LivingstonBrothersWoodcraft 5 жыл бұрын

Grazie.

@frankjimenez.c7441 5 жыл бұрын

MUY BONITO👍👍

@scottsimpey2965 5 жыл бұрын

Beautiful piece Dan. How do you go about aligning the rights so they are all even?

@LivingstonBrothersWoodcraft 5 жыл бұрын

Hi Scott, thank you. I'm just as careful as possible on the segmented feature ring pieces. There is really no special procedure for that. Thanks for watching.

@edkorsberg6441 5 жыл бұрын

That was one of the most enjoyable videos I have seen. I also see that you used Woodturner Pro software. Did you also use the companion software Lamination Pro to design the laminate that was imported into Woodturner Pro?

@LivingstonBrothersWoodcraft 5 жыл бұрын

Thank you Ed. I like that software very much, but I haven't used the Laminate Pro yet. I need to. Thanks for watching.

@edkorsberg6441 5 жыл бұрын

@@LivingstonBrothersWoodcraft If you don't me asking I have a couple of questions on some cuts you made on the wedgie sled at the 2:39 timeline of the video. I am unclear what you were removing from the chevron pattern. Does each piece need to be cut like that? FYI here is a picture of my first segmented bowl but I really want to learn how to make the feature rings like you have shown. I do own both the LaminationPro and WoodturnerPro software but have not really taken advantage of it yet. imgur.com/R5a6KDd

@LivingstonBrothersWoodcraft 5 жыл бұрын

@@edkorsberg6441 Hi Ed, Ok, at 2:39 you saw me cutting the top and bottom of the joined angled chevrons. What I then didn't show was me cutting the ends of each segment at 15 degrees so that I could form a concentric ring. I could have shown that, but I did so, in what could be viewed as, an unsafe manner that I did not want anyone repeating. I need to build a small table saw sled for those smaller cuts. And, I see that you sir are quite the turner yourself! Very nice work on that picture your showed me. Thanks for watching. --Dan

@edkorsberg6441 5 жыл бұрын

@@LivingstonBrothersWoodcraft Thank you. My first bowl turned out well however this notion of a detailed feature ring will be a challenge for me. I have practiced a bit on scrap wood but so far the consistency of the patterns is not acceptable. The LaminationPro software in theory allows for a bulk processing that ends up with a series of identical patterns. I believe it should work but I still need to gain more experience in order to pull this off. But it is something for me to strive for and I look forward to someday producing bowls on the level you have done.

@dennisbeamish9058 4 жыл бұрын

Hi Dan Love your work - thanks for sharing! What model of Rockler Sled is that you use in this video please? Thank you Dennis Beamish Cambridge Ontario Canada

@LivingstonBrothersWoodcraft 4 жыл бұрын

Thank you Dennis. To my knowledge, it's their only table saw cross-cut sled. I really like it.

@trunyan5080 5 жыл бұрын

Dan I liked your segmented potbelly bowl. Could you show or tell how you pressed the rings together? I've made several seg bowls most were successful but I'd like to increase the ring clamping pressure. Thanks

@LivingstonBrothersWoodcraft 5 жыл бұрын

Hi, once I have my rings formed and glued together with a ring clamp, I let them sit for 24 hours. They are then run through my drum sander so that I have a nice even surface on both sides of the rings. (I recommend that you do NOT run your glued rings through a planer.) When I glue the rings together, I use a 32 lb dumbbell, which is shown in my videos. That amount of weight provides nice "clamp" pressure. However, if you use too much weight, you run the risk of "flexing" the wood and, depending on how the rings are sized, you could flex either the exterior side or interior side by too much weight, which will leave a bad gap. Let me know if this helps you. --Dan

@trunyan5080 5 жыл бұрын

@@LivingstonBrothersWoodcraft Thank you, I know not to run rings thru the planner, I did it once, then made a replacement ring.

@joshblumenthal4873 3 жыл бұрын

How heavy is the weight you use. Seems so simple!

@LivingstonBrothersWoodcraft 3 жыл бұрын

35 lbs.

@ciromarins3488 5 жыл бұрын

Muito bom!!!

@pplemens2 4 жыл бұрын

What software do you use to design your bowls?

@LivingstonBrothersWoodcraft 4 жыл бұрын

Thank you for watching. Woodturner Pro.

@avramw 5 жыл бұрын

Gorgeous work! What sled do you use to cut the segments? I've used a wedgie sled but I don't think that's what you're using. How are you getting your angles so perfect in the rings?

@LivingstonBrothersWoodcraft 5 жыл бұрын

Hi Ron, I'm using the Rockler cross cut sled. It is very accurate. Thanks for watching.

@avramw 5 жыл бұрын

@@LivingstonBrothersWoodcraft So you find when using it you don't need to glue in halves and sand or any of those other tricks? How many segments per ring have you tried on it?

@LivingstonBrothersWoodcraft 5 жыл бұрын

@@avramw yes, but you need to make absolutely sure that your sled is parrallel to your table and blade. I can cut any amount of segments within reason. I have done 12, 18, 24 and 30 segments per ring. I highly recommend it. Dan