No video
Woodturning Cherry log fast - Speedbowl challenge
Рет қаралды 42,416
Күн бұрынWoodturned cherry log. From green wood to finished bowl fast...
@Duka Heritage released a SpeedBowl challenge, • Woodturning - SpeedBow...
NOTE: This video is not instructional, it is for entertainment purposes only. In this video I do not intend to encourage turning fast or in an unsafe or rushed manor but merely to show how efficiency in technique, as in all skills, reduces the time taken to perform a task.
Wood working is dangerous, please read and follow the instructions, including safety recommendations, that come with your tools. You must decide for yourself what level of risk you are willing to tolerate. Here is a link to the American Association of Woodturners "Safety Guidebook for Woodturners" that I encourage all turners or aspiring turners to read and follow:
www.gvwg.ca/doc....
Please comment, like and subscribe if you would like to connect or support my channel.
I use the below products to make my art.
Turning Tools
Powermatic 3520C amzn.to/2WxVxsF
Tailstock Swingaway amzn.to/2OBqszV
Sorby Turning set amzn.to/3jbAvcZ
Oneway Stronghold Chuck amzn.to/32sQE7X
Oneway live center amzn.to/2Cp6TrX
Oneway faceplate amzn.to/2Wzs9SK
Finishes
Green wood sealer amzn.to/2BwszlA
Power sanding amzn.to/2DWOT8N
Walnut oil amzn.to/39dgGNF
Sanding sealer amzn.to/3jjrQ8r
CA Glue amzn.to/30ouot9
As an Amazon Associate I earn from qualifying purchases so using the above links will help support this channel at no additional cost to you.
#SpeedChallenge #Woodart #woodturning #Cherrybowl #speedbowlchallenge
@suesmith9202 3 жыл бұрын
Beautiful bowl
@nomusicrc 4 жыл бұрын
Thank you for not adding music
@RobBrandtWoodturning 4 жыл бұрын
You are welcome Steve, I don’t have music on any of my videos. Thank you for the feedback. Keep well, Rob
@MickyBellRoberts 4 жыл бұрын
Rob, I am so glad I found your channel. As I get the time I am going to watch all your videos. I would love to try my hand at wood turning.
@RobBrandtWoodturning 4 жыл бұрын
Thank you. Be careful it is addictive. Join a local woodturning club and use their gear before you buy anything. I bought a whole bunch of stuff I thought I needed but don't. Now I don't have the cash for some of the materials I really want.
@paulsimmons390 4 жыл бұрын
Cherry is the Cadillac of woods. Beautiful work. i enjoy your not using music
@RobBrandtWoodturning 4 жыл бұрын
Thank you Paul, I appreciate the feedback. I have a large amount of cherry waiting to be cut up. It is nice to work and looks great finished. Keep well, Rob
@williamfawkes8379 4 жыл бұрын
Nice job, and as far I am concerned, you can't go wrong with cherry. Love that stuff.
@RobBrandtWoodturning 4 жыл бұрын
Hi William, I used it for the first time a few months ago and am now also a huge fan. Keep well, Rob.
@yvonnebrandt3595 3 жыл бұрын
Another exquisite piece of work. Well done Rob. I love it.
@RobBrandtWoodturning 3 жыл бұрын
Thank you, I hope you are well, Love Rob
@melvinrollins3400 4 жыл бұрын
That was sweet the way you trimmed that blank down with your chain saw !
@RobBrandtWoodturning 4 жыл бұрын
Thank you Melvin, necessity is the mother to invention :) it was also kind of fun! Keep well, Rob
@denwgg 4 жыл бұрын
Great bowl. Had a scroll down and found out about the microwaving as hadn’t thought of this, booosh looks like he’s got a good solution with the ziplock bag; I’ll give em a try. I’ll have to go back and have a look at some of previous videos as only just found your channel. Have a great day, Den
@RobBrandtWoodturning 4 жыл бұрын
Thanks for the comment and connecting Den, I hope you like the rest of the videos. I think the secret with the microwave technique is not to get impatient and cook it for too long. I have a bowl that my daughter cooked for 10 mins instead of 1...it is going to need resin :) Keep well, Rob
@Stable_Studio 3 жыл бұрын
Great video 🙏🏻
@RobBrandtWoodturning 3 жыл бұрын
Thanks for taking the time to comment Brian.
@mpart_woodlathe-stuff 4 жыл бұрын
Hi Rob, that turned out so well🏆 You had two things working in your favor - green wood and It's Cherry and you can't go wrong with that IMHO😃 I do like the voice over, if that's the new format. Not too much and not too little with good audio to boot👍 Thanks for presenting and sharing with us🙏 Stay safe. -Mike😷
@RobBrandtWoodturning 4 жыл бұрын
Thank you for watching and the feedback Mike, yes the new format was the voice over. I was wondering whether that would be valuable to you guys watching. I figure people could mute the audio if they prefer to just to watch 😁 Keep well, Rob.
@mpart_woodlathe-stuff 4 жыл бұрын
@@RobBrandtWoodturning Mute is a useful feature. Didn't need it for you👍
@TurningsbyTurner 4 жыл бұрын
Awesome speedbowl! I like how you had the clock in the corner! Looks beautiful Rob! 👍
@RobBrandtWoodturning 4 жыл бұрын
Thank you Sir, I wish I had planned it. I figured out how to display the clock in the corner while editing and was quite please with myself. Keep well, Rob.
@TheTinyWorkshop 4 жыл бұрын
Beautiful bowl and also turned in a good time. Finishing with the oil is also beautiful. Frank.
@RobBrandtWoodturning 4 жыл бұрын
Thank you frank. I intend to use this one for my snacks and biltong so went with oil only :) Will I see a #Speedbowl from you in the near future? Keep well, Rob
@TheTinyWorkshop 4 жыл бұрын
@@RobBrandtWoodturning I don't promise anything yet, but I already feel that I want to participate in this challenge. 😬
@TonyHigginsonVlog 3 жыл бұрын
Excellent video, and a beautiful simple bowl.
@RobBrandtWoodturning 3 жыл бұрын
Thank you Tony, I do like the clean lines. Keep well, Rob
@spindlesworkshop9744 4 жыл бұрын
Great job
@RobBrandtWoodturning 4 жыл бұрын
Thank you, I hope you will take up the challenge. Duka Heritage challenged me :) Keep well, Rob
@dukaheritage9445 4 жыл бұрын
@@RobBrandtWoodturning :)
@LisaRamlow 4 жыл бұрын
Cherry is one of my favorites, especially when it's green. Really like this bowl, and the format as well. I'm glad I'm not the only one still working out those kinks. Hit the sub button and am looking forward to more videos 👍
@RobBrandtWoodturning 4 жыл бұрын
Thank you for watching and connecting Lisa. It is really difficult to get feedback, so I guess I will just try different things and see what works. My dibber/vampire stake was a complete flop on KZfaq, 3 subscribers in a week and very few views, the next video was very different. I hope this video gives other joy, I know I enjoy making the woodturning and the video. Keep well, Rob
@LisaRamlow 4 жыл бұрын
Rob Brandt Woodturning yeah I am still putzing along trying to figure this thing out. But it’s a lot of fun and at some point I’ll hit my stride. Are you in the states?
@RobBrandtWoodturning 4 жыл бұрын
@@LisaRamlow Yes, I am in the Albany NY area. Where are you located?
@LisaRamlow 4 жыл бұрын
Rob Brandt Woodturning west-central Michigan, in the Manistee National Forest 😍 We’re about halfway between Grand Rapids and Traverse City
@tompavlik302 4 жыл бұрын
Very nice bowl, Rob.
@RobBrandtWoodturning 4 жыл бұрын
Thank you Tom, it is going to be my snack bowl. Keep safe, Rob
@kobiekaasjager4822 4 жыл бұрын
Awesome just awesome.
@RobBrandtWoodturning 4 жыл бұрын
Thank you Kobie. I appreciate you taking the time to comment on my videos. Keep well, Rob.
@workshoplife3740 4 жыл бұрын
Beautiful, love the grain in the wood.
@RobBrandtWoodturning 4 жыл бұрын
Thank you for watching, I particularly like the symmetry. Keep safe,Rob
@ryanallthewiser 4 жыл бұрын
Great video. Thanks for sharing
@RobBrandtWoodturning 4 жыл бұрын
Thank you Alan, I am still learning and experimenting with both woodturning and video production, both are an art that I am working on. Thank you for your feedback, Keep well, Rob
@WoodenItBeNice 4 жыл бұрын
Hi Rob, Great looking bowl. I have quite a few pieces of Cherry drying at the moment so looking forward to getting it on the lathe in a few months time. Cheers, Huw
@RobBrandtWoodturning 4 жыл бұрын
It is a really nice wood to turn. I have a lot of it after a tree damaged my roof a few months back...hope it can be repaired before winter :( Keep safe, Rob.
@pfiltz 4 жыл бұрын
I like the format. Clear instructions on what your doing and more important. Why your doing them. Sub'd I like turning Cherry. I have some really green cherry waiting to turn. I've just started to turn Bradford Pear. Another treat to turn.
@RobBrandtWoodturning 4 жыл бұрын
Thank you for the feedback Philip, I have never turned Bradford Pear, so will have to look out for it. Keep well, Rob.
@turnintoo7887 3 жыл бұрын
Very nice
@RobBrandtWoodturning 3 жыл бұрын
Thank you Sir, appreciate you watching and leaving a comment. Keep well, Rob
@raymondnoirot2715 4 жыл бұрын
Un grand merci pour votre demonstration maintenant je peux réaliser le même objet bravo et encore merci Amities Noirot Raymond de Ramonville saint agne
@RobBrandtWoodturning 4 жыл бұрын
Vous êtes le bienvenu Raymond, j'espère que ça se passe bien pour vous. J'espère que vous aimez mes autres vidéos aussi. Gardez bien, Rob.
@mikek47 4 жыл бұрын
Great job. Cherry is such nice wood to work wet.
@RobBrandtWoodturning 4 жыл бұрын
Yes, I love it too, I am even willing to put up with the sprayed sap and rust. Keep well, Rob
@exotictones1054 4 жыл бұрын
Good looking bowl.
@RobBrandtWoodturning 4 жыл бұрын
Thank you very much. Keep well, Rob
@gaowoodlab 4 жыл бұрын
Nice bowl, beautiful grain and color,👍👍👍
@RobBrandtWoodturning 4 жыл бұрын
Hi Gao, thank you. Keep well, Rob.
@gaowoodlab 4 жыл бұрын
🙂🙂🙂
@MickyBellRoberts 4 жыл бұрын
Rob, you are getting closer to the 1000 mark, I bet you are getting excited.
@RobBrandtWoodturning 4 жыл бұрын
Yes, it is not what I necessarily set out to achieve, but making good videos regularly takes me a lot of time. Also, the materials for the projects get expensive, so a little ad revenue would help. Mostly I am exited that there are so many people sharing in my art, and forming a community with me. I feel like I have already made some cool friends, some that make me laugh out loud with their comments. I hope you get to experience these things too. Keep well, Rob
@MickyBellRoberts 4 жыл бұрын
Rob Brandt Woodturning Thank you Rob, lets grow together.
@MickyBellRoberts 4 жыл бұрын
TODAY WILL NEVER COME AGAIN. Be a blessing. Be a friend. Encourage someone. Take time to care. Let your words heal and not hurt. And don't forget to share your smile with someone who needs one!
@HodgePodgeWoodWorks 4 жыл бұрын
Looking good Rob! Audio sounded good.
@RobBrandtWoodturning 4 жыл бұрын
Thank you.
@kimseyjustkimsey5256 4 жыл бұрын
Nicely done Rob Beautiful bowl!
@RobBrandtWoodturning 4 жыл бұрын
Thank you Kimsey, i was a little jealous of the woods you have access to after seeing you cut up that Dogwood, where are you located?
@kimseyjustkimsey5256 4 жыл бұрын
Rob Brandt Woodturning You’re welcome man, 🤝 I’m in Georgia, Where are you located? I might be a little jealous how fast ya turned that bowl, it takes me awhile I’m pretty slow , I would be afraid to tell how long it takes me to turn one.
@RobBrandtWoodturning 4 жыл бұрын
@@kimseyjustkimsey5256 I am in Upstate NY. The wood was wet with straight grain, no knots and no insects so my gouge could take big cuts. I think I was below 1000 rpm the whole time. I turned it in 30 mins and then spent the same or more sanding, I want to get a better finish straight from the gouge, but am struggling, especially on the inside of my thinner bowls as the wood moves to much. Keep well,Rob
@kimseyjustkimsey5256 4 жыл бұрын
Rob Brandt Woodturning I have a little trouble on the inside of the bowls with the gouge bouncing around, Hoping I can get cleaner cuts to, and most the time after I sharpen the gouge I get bad catches 😬 this past weekend I almost had a bowl finished, went to sharpen to get a clean cut also the wood did have some defects crack lines in it already, I was being extra careful and as soon as the chisel made contact with the bowl, it catches 😬 I heard a few loud noises and just stood there for a moment 😣 Hopefully I can epoxy it and fix it, went into 3 pieces
@RobBrandtWoodturning 4 жыл бұрын
@@kimseyjustkimsey5256 There is supposed to be a sharpening profile for finishing the bottom of bowls which allows one to ride the bevel all the way down...I haven't got it right yet but getting better. I am experimenting with a negative rake scraper and round carbide that I tilt for a sheer cut...feels like cheating though. :)
@domingospedrobraga265 3 жыл бұрын
Parabéns pra vc que Deus abençoe sempre vc 👏👏❤
@RobBrandtWoodturning 3 жыл бұрын
Obrigado Domingos, Keep well, Rob
@AllenOxendine 4 жыл бұрын
Beautiful Piece, thanks for sharing. Full View and Like
@RobBrandtWoodturning 4 жыл бұрын
Thank you Allen. I hope your turning is going well? Let me know if I can help. Keep well, Rob.
@suesmith9202 3 жыл бұрын
Subscribed
@RobBrandtWoodturning 3 жыл бұрын
Thank you Sue.
@sonyhk3824 4 жыл бұрын
So beautiful work, 👍💯
@RobBrandtWoodturning 4 жыл бұрын
Thank you, I have a few other videos that you might like too. Keep safe, Rob.
@sonyhk3824 4 жыл бұрын
I like it 👍. Cheers Rob
@chewyduck1355 4 жыл бұрын
Nice. I agree that turning green wood is just so satisfying and fun. I would appreciate it if you would tell us what you're finishing the bowl with as this is an area that I'm struggling with a bit. Thanks.
@RobBrandtWoodturning 4 жыл бұрын
Hi Calvin, I used walnut oil exclusively this time however I sometimes use a shellac sanding sealer on the outside followed by the walnut oil. Please let me know if you find a good combination that works for you, as I am still experimenting. I mixed up some shine juice and might try that on my next project. Thanks for connecting Calvin, Keep well, Rob
@emgiwoodworks 4 жыл бұрын
Nice one Rob. You like the microwaving method? Since I have no micrrowave oven to spare, I don't do that.
@RobBrandtWoodturning 4 жыл бұрын
Hi Leo, I am coming round to it. I needed dry wood for my video so thought I would try. My wife just told me that I should get myself a microwave for the workshop...subtle? I will do it again as it worked very well for me. Keep well, Rob
@georgepauselli769 4 жыл бұрын
Very nice I like it
@RobBrandtWoodturning 4 жыл бұрын
Thank you for watching and commenting George. Keep well, Rob
@user-oo6nf2zg8i 10 ай бұрын
I love the finish on it! what is the oil you are putting on after you are done sanding?
@RobBrandtWoodturning 6 ай бұрын
Sorry for the delayed response, it is Walnut oil. Food safe and is supposed to polymerize to form a protective barrier.
@dukaheritage9445 4 жыл бұрын
;) Nice work Rob
@RobBrandtWoodturning 4 жыл бұрын
Thanks, it might actually have been faster if I wasn't trying to beat your time :) I would have had a cleaner cut which would require less sanding....which was the killer for me. You probably have more reach to push the challenge. I don't know where to start...perhaps a playlist on your channel? Anyway, what did you think of the narration? I don't think I am a natural orator like you...maybe I just need more experience. Keep turning, Rob.
@andrewspeight6973 4 жыл бұрын
Rob. Nice little turn and a good result. However, I don't understand this concept of speed turning. Safety is a primary concern in this hobby, and hurrying to do something as fast as you can is surely not the positive message that you want to send to those who are trying to learn from your more experienced efforts, is it? In addition, most can turn a bowl with a little practice, but it is the taking of one's time and paying careful attention to all the little details that produces the best and safest result. Pardon my criticism but all comments count right? :) Good luck with your channel.
@RobBrandtWoodturning 4 жыл бұрын
Andrew I agree with everything that you say. Safety in turning, and indeed any form of woodworking is important. I do not make these videos as instructional, they are for entertainment puposes only. This video is not meant to encourage turning fast or in an unsafe manor but to show how efficiency in technique, as in all skills, reduces the time taken to perform a task. It also answers the question, "How long does it take to make a bowl". Thank you very much for the comment, Keep safe, Rob
@MikeTheMaker1 4 жыл бұрын
The dark sides give it a nice flair.
@RobBrandtWoodturning 4 жыл бұрын
Its a shame to turn most of the dark wood away but I wanted a larger sized bowl. I do like the contrast and the lighter wood has darkened/reddened with the oil finish. Thanks for watching, Keep well, Rob
@gregeastman6662 3 жыл бұрын
does the 1hr an 15 min include micowave time ?
@RobBrandtWoodturning 3 жыл бұрын
Hi Greg, no it doesn’t. There was probably another hour or two in the microwave spread over three days. Keep well, Rob
@thetouringbroodbyajaikumar3032 4 жыл бұрын
Very nice my frd 👍👍 L 👍👍👍👍👍 👍
@RobBrandtWoodturning 4 жыл бұрын
Thank you for watching, I am glad you liked it. Keep well, Rob
@billydillard2948 4 жыл бұрын
Mineral oil finish? I love it.
@RobBrandtWoodturning 4 жыл бұрын
Thank you Billy, I used walnut oil because it soaks in and eventually polymerizes to form a film. Mineral oil does not set so I don't like to use it on its own, but that is just personal preference. Depending on the grade of mineral oil, both are food safe. Keep well, Rob
@lyndalanthony635 4 жыл бұрын
I've done the inside of a bowl like that in 90 seconds. Same diameter.
@RobBrandtWoodturning 4 жыл бұрын
Impressive Lyndal, I might get there by the time I finish rough turning my downed cherry tree. Keep well, Rob.
@lyndalanthony635 4 жыл бұрын
@@RobBrandtWoodturning Yeah, I roughed out 25 bowls in six hours one day. The bummer was cleaning up the shavings.... 8 garbage cans packed full.
@RobBrandtWoodturning 4 жыл бұрын
@@lyndalanthony635 I use the shavings for mulching around the trees and vegetables. Saves on buying mulch.
@lyndalanthony635 4 жыл бұрын
@@RobBrandtWoodturning I don't have ROOM for all the shavings I make. I have a nursery 4 blocks from my house. They love me!
@RobBrandtWoodturning 4 жыл бұрын
@@lyndalanthony635 LOL
@bobhowitt 4 жыл бұрын
Lovely job Rob, can you tell me where I can get that faceplate with clamps to remove the tenon please?
@RobBrandtWoodturning 4 жыл бұрын
Hi Bob, I use the Record Power SC4 chuck, because I have it, with the Cole Jaws amzn.to/39qTonE but you should be able to get Cole jaws for whichever chuck you have. Here is a link to the Record Power SC3 chuck ( amzn.to/2D2OsJI ) if you want to check it out. The links are not necessarily the cheapest, but should give you an idea of the product. The Record Power and Nova chucks use interchangeable jaws. If you have the cash and are starting from scratch then you won't go far wrong, in my opinion, with a Oneway or a Vicmarc chuck and jaws to suit your lathe. I hope that is helpful. Keep safe, Rob.
@Artem-ei3pl 4 жыл бұрын
Интересно. Подписывай чем обрабатывается.
@RobBrandtWoodturning 4 жыл бұрын
Thank you for the feedback Artem, I haven't figured out how to sign my pieces yet. I tried a marker and the ink was washed away by the finish. Maybe I need a brand, with my logo..I will give it more thought. Keep well, Rob.
@Artem-ei3pl 4 жыл бұрын
@@RobBrandtWoodturning I am wondering how you process wood? And what kind of tree?
@theodorebarrettsr.705 4 жыл бұрын
👍👍👍👍👍👍❤
@RobBrandtWoodturning 4 жыл бұрын
Thank you Theodore, I love your logo! Keep well, Rob
@LarryDMitchell 4 жыл бұрын
GREAT PROJECT. Rob, you mentioned you used a microwave to dry the bowl. Can you tell explain the specifics of the drying? Also, did you use a moisture meter or a scale? I have some green wood I'm going to turn soon. Thanks
@RobBrandtWoodturning 4 жыл бұрын
I warm up the rough turned bowl, feels warm but not so hot that it is uncomfortable to touch, then let it cool down and repeat. I immediately saw small checks starting, so theorized that even in microwave drying it was important to slow down loss from end grain. I then painted the whole bowl with Anchorseal 2 and continued the microwave cycling. I have only done two bowls like this. The first air dried for two months and faired better than the one in this video, which had two small cracks that formed..l should probably make a video if there is interest. I used weight and moisture meter.
@boooshes 4 жыл бұрын
@@RobBrandtWoodturning Rob, you might also try a method I have used for bowls and for spoons. In order to keep the outer fibers of the wood at high moisture content while drying, put the bowl in a plastic zip.lock bag. Heat until steam forms. Remove and cool, then pour off the water that condences. Close it up and repeat. The steam in the air surrounding the wood keeps the outer fibers wet while you are still driving out water from the wood. Doing this in steps with patience usually gets me good results. Best of luck. Joel.
@RobBrandtWoodturning 4 жыл бұрын
boooshes Thank you for sharing, I hadn’t heard of this technique before but it makes so much sense to me. I hope that you keep in touch. Best regards, Rob.
@perrielloliveira7049 3 жыл бұрын
show
@RobBrandtWoodturning 3 жыл бұрын
🙏
Фани Хани
Рет қаралды 1,4 МЛН