Woodturning - Ebony and Cherry Square Oriental Box

No video

Woodturning - Ebony and Cherry Square Oriental Box

Рет қаралды 44,269

2 жыл бұрын

The first true woodturning demonstration that I ever watched on KZfaq was Jimmy Clewes' turning a square oriental box. At the time, I tried my hand at turning it and it was mildly successful. I ran across one of Jimmy's demos just the other day so, I thought it would be fun to try this project again after gaining 2 years of experience, and also add my own little flair to the design.
Let me know what you think of my attempt in the comments!
Jimmy's demos: • Jimmy Clewes Turns a S...
• Jimmy Clewes - Square ...
The wood is kiln dried cherry with an ebonizing solution applied to the bottom. This solution reacts with the tannins in the cherry and causes it to oxidize and turn a dark brown, almost black. The finial is made from East Indian ebony.
Then the entire thing was finished with Hampshire Sheen Danish Oil.
I had a sticker swap to catch up on as well. David Icenhower from Webfoot Resin & Wood Creations - / @webfootresinandwoodcr...
Check him out and give him a sub!
Thanks for watching!
Seth
All music and sound effects provided by Audiio.com
Referral link: audiio.com/pricing?oid=1&affi...
Use code AROT10 to knock %10 off of all subscription plans!
DISCLAIMER: My videos are for entertainment purposes only! I am NOT a professional woodturner/woodworker!!! Always seek professional advice and training before using any power tools. Make certain that you read and understand the manufacturers guidelines and safety instructions for the tools/equipment that you use. The methods shown in my videos are my methods for woodturning/woodworking and may not be necessarily advisable.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!!!!
Do not attempt any technique simply because you saw it in one of my videos! If you have any doubts, please do not do it!
#woodturning #woodworking #asmr #maker #art #woodart #woodshop #woodturnersofyoutube #woodlathe #woodchips #sawdust #shoplife #BrickhouseCraftworks #woodturninglathe #JimmyClewes

Пікірлер: 190

@holdemNE1 2 күн бұрын

You turned that finial like a boss!

@BrickhouseCraftWorks Күн бұрын

Haha! Thanks you for that!

@felocarp Жыл бұрын

Seth, I'm blown away at just how beautiful this box is! The contrast between the top and the bottom is stunning. The ebony finial is so complimentary. Awesome craftmanship! Thanks!

@BrickhouseCraftWorks Жыл бұрын

Thanks so much! That really means a lot and I’m so glad you liked it! I poured my heart and soul into this one. It’s one of my favorite things I’ve ever made.

@racheldray1057 19 күн бұрын

I'm new to your channel, and wow, what a great turning to see first! Absolutely gorgeous!

@BrickhouseCraftWorks 19 күн бұрын

Hi Rachel! Thanks so much for visiting. I hope you explore my other projects! I’m hoping to get some more videos up soon!

@davidmartin4578 3 күн бұрын

I have been a turned for a long time and I think this piece is awesome and I plan to make my Verizon,,,turn on

@BrickhouseCraftWorks 2 күн бұрын

Thank you so much, David! That means a lot! So glad you enjoyed it.

@DougMilleratWoodSpunRound 2 жыл бұрын

Wow! The cherry is beautiful to begin with. And your design is top notch. The ebonized bottom is GORGEOUS! Your lid is spot on. And the finial is simply drop dead gorgeous. This is a brilliant piece. Thank you for sharing it with us.

@BrickhouseCraftWorks 2 жыл бұрын

Thank you Doug! Those are kind words indeed! I’m so glad that you liked it! Thank you so much for your support!

@sueshrubsole3712 Күн бұрын

New to your channel. Fabulous piece and inspirational for the future. Thankyou😊

@BrickhouseCraftWorks Күн бұрын

Thanks so much! I’m so glad you enjoyed it!

@IWANNAMAKESTUFF 2 жыл бұрын

I'm nothing but jealous of of you precision and flowing form design on this piece and jealous of your Laguna beast you running lol Top Job SUB!!! BTW nice to see the UK woodturning Gang in the comments!!!!

@BrickhouseCraftWorks 2 жыл бұрын

Hahaha! Thank you so much, I’m glad you enjoyed it! Really appreciate the sub! Thanks man!

@randykniebes5364 9 күн бұрын

just a beautiful piece and your skill level!!!

@BrickhouseCraftWorks 6 күн бұрын

Thanks so much! I’m so glad you enjoyed it!

@William_Kenny Ай бұрын

Beautiful piece nicely done 👍

@BrickhouseCraftWorks Ай бұрын

Thank you very much! I’m glad you enjoyed it!

@BAILEYWOODWORKS 2 жыл бұрын

Snaps gloves like he knows he is dropping a dime piece on the KZfaq! Great looking project Seth! She's a beaut!

@BrickhouseCraftWorks 2 жыл бұрын

Hahahaha! That literally made me laugh out loud!! Thanks so much Chris! Appreciate you watching buddy.

@davidsauls9542 10 ай бұрын

One of the most beautiful objects I have ever seen ! Thank You Sir

@BrickhouseCraftWorks 10 ай бұрын

Thank you so much, that is so nice of you! I’m so glad you liked it!

@TournageDubois 2 жыл бұрын

That is a STUNNING piece, brother!!!! Very well done (as always)!!!!

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much man! You’re too kind! Appreciate all of your support!

@spirits33k3r 2 жыл бұрын

Nicely done! Jimmy is a great inspiration to any woodturner. Took a hands on class with him several years ago and enjoyed it immensely!

@BrickhouseCraftWorks 2 жыл бұрын

Hi Robert. I’m quite jealous, I’m sure that was an awesome class! 😁 You’re so right, Jimmy is a great inspiration. He certainly had a big impact on me when I was first starting out!

@mikewilson5392 Жыл бұрын

i took his class at his home in las vegas as well- learned more in three days than you could learn in a year on your own-

@BrickhouseCraftWorks Жыл бұрын

That’s so cool, Mike! I’d love to do that sometime. Thanks for watching and commenting!

@jamiemitchell5132 4 ай бұрын

Beautiful work I did one the end of last year not a patch on yours keep it up will be watching thank you Regards Jamie

@BrickhouseCraftWorks 4 ай бұрын

Thanks Jamie!! I really do appreciate that!!

@jamiemitchell5132 4 ай бұрын

No worries like I said a pleasure to watch thanks Jamie

@GianbrunoPirona 9 ай бұрын

Bellissimo lavoro. Bravo

@BrickhouseCraftWorks 9 ай бұрын

Thank you so much!

@OzarkArtsandCrafts 2 жыл бұрын

Your Oriental Box is awesomeness in a true art form! Simply beautiful.

@BrickhouseCraftWorks 2 жыл бұрын

Hi Dennis! You’re too kind! Thanks so much!

@marklengal9990 2 жыл бұрын

I saw the same video over and over. Plan on taking a class with Jimmy one day. I can’t believe how dark you were able to get the cherry. Outstanding

@BrickhouseCraftWorks 2 жыл бұрын

Hi Mark! Thank you watching! I would love to take a class with Jimmy as well, he was a big inspiration for me when I first started turning. I’m really glad you like this one, I hope I did Jimmys original design justice! Haha!

@valeriehenschel1590 Жыл бұрын

Love how you shaped it, particularly the corners. Nice flair for a square bowl/box. Great finial too.

@BrickhouseCraftWorks Жыл бұрын

Thank you so much, Valerie! I really appreciate that!

@stewartmcmanus3991 Жыл бұрын

Mate, one of the best I've seen. So well done. Love the finial.

@BrickhouseCraftWorks Жыл бұрын

Thank you so much, Stewart! You’re too kind! Thanks for watching!

@genie005 2 жыл бұрын

This is so amazing! 👍

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much! I’m so happy you like it!

@davidmcmahon8262 2 жыл бұрын

Absolutely beautiful.

@BrickhouseCraftWorks 2 жыл бұрын

Thank you David! I really appreciate it!

@oneturnatatime6309 2 жыл бұрын

Now that's amazingly beautiful 👌

@BrickhouseCraftWorks 2 жыл бұрын

Thank you Jojo! I’m so glad you think so!

@DavidAdamsen 2 жыл бұрын

Beautiful piece, Seth! Well done!

@BrickhouseCraftWorks 2 жыл бұрын

Hey David! Thanks man, I really appreciate it!

@gregjohnson8486 2 жыл бұрын

Wow!! Absolutely beautiful!!! Thanks for sharing. 👍🏾

@BrickhouseCraftWorks 2 жыл бұрын

Hi Greg! Thank you for watching and taking the time to comment! I’m glad you liked it!

@JackMackWoodturning 2 жыл бұрын

Really nice work man! 👍🏻👍🏻

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much man!! That truly means a lot coming from you!

@jarmstrong2843 2 ай бұрын

Outstanding!

@BrickhouseCraftWorks 2 ай бұрын

Thank you kindly!

@TheMessyStudio 2 жыл бұрын

Beautiful piece, Seth! Great job!

@BrickhouseCraftWorks 2 жыл бұрын

Hey Billy! Thanks so much, buddy!

@spindlesworkshop9744 2 жыл бұрын

What a great looking piece! Well done 👏👏👏

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much Luie! Appreciate you watching buddy!

@ScenicCityWoodturning 2 жыл бұрын

Wow, Seth that is just spectacular! So much to like on every piece. Very impressive!

@BrickhouseCraftWorks 2 жыл бұрын

Hey Mike! Thanks so much for the kind words, buddy!

@tfturning 2 жыл бұрын

Beautiful work Seth, really nicely done! Thanks for sharing 👏

@BrickhouseCraftWorks 2 жыл бұрын

Thanks Tim! Thank you for watching, my friend! I’m glad you enjoyed it!

@daveclemens4141 4 ай бұрын

WOW! Beautiful Design and Woodturning Skills!

@BrickhouseCraftWorks 4 ай бұрын

Hi Dave, thanks so much!

@WilsonPhotography1 Жыл бұрын

Awesome work

@BrickhouseCraftWorks Жыл бұрын

Hi Danny, thanks for watching and commenting! I appreciate it!

@mountainviewturning5319 2 жыл бұрын

Looks great 👍

@BrickhouseCraftWorks 2 жыл бұрын

Hey Chris!!!! Thanks so much, brother!

@lakeshorewoodturner5136 2 жыл бұрын

Wow!!! This piece is beautiful. Great job Seth.

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much, Michael! I’m glad that you like it!

@JiggsysShed 2 жыл бұрын

That is an awesome piece Seth. Beautiful work.

@BrickhouseCraftWorks 2 жыл бұрын

Hey John, thanks buddy! I really appreciate that!

@steveashlearnerturner 2 жыл бұрын

amaizing piece Seth great work

@BrickhouseCraftWorks 2 жыл бұрын

Hey Steve! Thanks buddy! Appreciate you watching, my friend!

@antfactory_kit 2 жыл бұрын

This is amazing.. so beautiful! Thank you for a nice video!👍👍

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much for watching! I’m glad you enjoyed it!

@BarrysWoodCreations 2 жыл бұрын

That's a stunning piece of work Seth. Brilliantly turned! outstanding.

@BrickhouseCraftWorks 2 жыл бұрын

Thank you Barry! I really appreciate you watching and commenting!

@WoodturningByME 2 жыл бұрын

Well done Seth. I really like this one!

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much Magen! I’m so glad you liked it!

@copperowlwoodturning5929 2 жыл бұрын

Beautiful, Seth. This is gallery worthy. Awesome cuts. Great job. Take care. 😊

@BrickhouseCraftWorks 2 жыл бұрын

Wow, Rob! That really means a lot! Thank you so much!

@texashula2213 2 жыл бұрын

Handsome piece!

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much for watching and commenting! I’m so glad you enjoyed it!

@ralphhorne6063 2 жыл бұрын

Subscribed after seeing this work of art. Absolutely beautiful piece of turning.👏👏👏

@BrickhouseCraftWorks 2 жыл бұрын

Hi Ralph, thank you so much for the sub, and for commenting! I’m thrilled that you liked it!

@adrianolsen-woodhamwoodtur4980 2 жыл бұрын

Stunning design Seth…..I love it ! Well done indeed 👏👏👏

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much, Adrian! I’m thrilled that you enjoyed it!

@kobiekaasjager4822 2 жыл бұрын

Oh wow it is awesome I am speechless wow.

@BrickhouseCraftWorks 2 жыл бұрын

Hi Kobie, thank you so much for watching and commenting! I’m so happy you like it!

@marklawrence64 2 жыл бұрын

Very Nice Indeed. Thanks for sharing the process 👍🏽😊

@BrickhouseCraftWorks 2 жыл бұрын

Thank you Mark! It’s my pleasure. I’m glad you enjoyed the video!

@laurencebugeja4160 2 жыл бұрын

It is really nice piece Seth well done and thanks for sharing 👍

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much Laurence! I really appreciate it!!

@SilverBack. 2 жыл бұрын

Fantastic piece Seth 👏👏👏👏

@BrickhouseCraftWorks 2 жыл бұрын

Thank you Douglas! Really appreciate that, my friend!

@WoodenItBeNice Жыл бұрын

ASTONISHING Seth. Love it to bits. Take care mate. Cheers, Huw

@BrickhouseCraftWorks Жыл бұрын

Hiya Huw! Thanks so much, my friend! I’m glad you enjoyed it.

@treeforge 2 жыл бұрын

Nicely done sir, gonna enjoy following your channel.

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much! Same to you! Looking forward to the Cross Channel Challenge. Can’t promise but, I’m gonna try to participate as well.

@SiamWoodShop 2 жыл бұрын

Fantastic work Seth, great piece, stay safe, John

@BrickhouseCraftWorks 2 жыл бұрын

Thank you John! Really appreciate it, my friend!

@JordanWoodwerx 2 жыл бұрын

That’s a beautiful piece Seth, love it brother! 👍🏻👍🏻

@BrickhouseCraftWorks 2 жыл бұрын

Thanks Bruce!! Means a lot coming from you man!

@Bramsshed1913 2 жыл бұрын

Beautiful job Seth ,well done mate

@BrickhouseCraftWorks 2 жыл бұрын

Hi Bram! Thank you so much!

@markashlock9017 Жыл бұрын

Very nice!

@BrickhouseCraftWorks Жыл бұрын

Hi Mark, thanks for watching and commenting! I’m glad you liked it!

@radarthewoodturner8912 2 жыл бұрын

Awesome piece so beautiful great job stay safe friend👍👍👍👍

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much Radar! I’m glad you liked it!

@chicocash9668 2 жыл бұрын

Just a work of Art

@BrickhouseCraftWorks 2 жыл бұрын

Hi Chico! Thanks for watching and taking the time to comment! So glad you enjoyed it!!

@thefish5861 2 жыл бұрын

Nice tool control!

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much, I really appreciate that!! Thanks for watching!

@lmp2motivation 2 жыл бұрын

You are really talented my friend 🤗 you have my full support 😁 thank you for sharing this amazing video👌👌✨✨👍

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much for your kind words and encouragement! I greatly appreciate you taking the time to watch and comment, and I’m so happy you like it!

@daveclemens4141 2 жыл бұрын

BEAUTIFUL piece! Love the curves of the wings. Subscribed after just watching one of your videos. Looking forward to much more. TY

@BrickhouseCraftWorks 2 жыл бұрын

Hi Dave! Thank you so much for your kind words, and for the sub!

@RumahBubutRB 2 жыл бұрын

Very very good👍👍👍

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much! I really appreciate you watching and commenting!

@brentbeacroft3363 2 жыл бұрын

Very pretty piece Seth, thanks for sharing, Never considered ebonizing cherry before

@BrickhouseCraftWorks 2 жыл бұрын

Hi Brent! Thanks for stopping by and watching! This my first attempt at ebonizing cherry. I think it turned out well enough to give it another go sometime! 😂

@DeadriseWoodCrafts 2 жыл бұрын

Damn son! Home run with this one!!

@BrickhouseCraftWorks 2 жыл бұрын

😂🤣😂🤣 Best comment ever!!!!!!! Thanks Emmett!!

@TheKlondikeCraftsman 2 жыл бұрын

excellent piece Seth!

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much Lewis! I’m so glad you liked it!

@EmilinaKuhinja 2 жыл бұрын

Excellent video. greeting

@BrickhouseCraftWorks 2 жыл бұрын

Greetings Emilina! Thank you for watching and commenting. I’m glad you liked it!

@tips8762 2 жыл бұрын

Continue to work like this to learn

@BrickhouseCraftWorks 2 жыл бұрын

Thank you so much, it has been great journey learning to make things like this, and I can’t wait for the next step! Thanks for watching and commenting.

@Mauroiltornitore 2 жыл бұрын

Great work, my friend! Thanks for sharing, just subscribed to your channel! Cheers, Mauro

@BrickhouseCraftWorks 2 жыл бұрын

Thank you Mauro! I’m so glad you liked it! Thanks for the sub!

@scarpati79 8 ай бұрын

Bravissimo 👏🏻👏🏻👏🏻👍🏻

@BrickhouseCraftWorks 8 ай бұрын

Thank you so much!

@Rupahappylife 2 жыл бұрын

Nice

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much for watching and commenting! I really appreciate it!

@markthompson6860 2 жыл бұрын

well done ,,,,,,,,,

@BrickhouseCraftWorks 2 жыл бұрын

Thank you Mark!! I really appreciate you taking the time to watch and comment.

@WoodturningSaby 2 жыл бұрын

Nice😃👍

@BrickhouseCraftWorks 2 жыл бұрын

Thanks! I’m glad you liked it!

@BadAppleWoodwerx 2 жыл бұрын

Wow Seth, that's awesome. You had me at "square" to be honest, but great job! i may draw some inspiration from this. 😉

@BrickhouseCraftWorks 2 жыл бұрын

Give it a go, Tim! I’d love to see some more square pieces from you! Also, check out the demos from Jimmy Clewes that I linked in the description. That’s where I drew my inspiration for this piece. They are super informative!

@nix8960 2 жыл бұрын

Awesome

@BrickhouseCraftWorks 2 жыл бұрын

Thank you! I appreciate you taking the time to watch and comment!

@ivanwitt9067 Жыл бұрын

Would it be possible to see a picture of your dust collector arm/stand set up? The little bit shown on this (outstanding!) video seems like what I have been looking for. Many thanks in advance. Ivan Michigan USA

@BrickhouseCraftWorks Жыл бұрын

Hi Ivan! Thank you for your kind words! The setup I’m using is the one from Woodturners Wonders. I have the full track system, but you can buy just the dust collector arm by itself, without the rest of the attachments. I’d be happy to send you some pictures. Hit me up on my email. BrickhouseCraftWorks@gmail.com

@vladvolozov58 2 жыл бұрын

Woaa cuối cùng thì cũng có bài này rùi hihi😍❤

@BrickhouseCraftWorks 2 жыл бұрын

Thanks for watching!!

@GavSedae 2 жыл бұрын

Niiiiiiiice!

@BrickhouseCraftWorks 2 жыл бұрын

Haha! Thanks Gav! Glad you like it buddy!

@glencrandall7051 2 жыл бұрын

What I think! For starters Jimmy Clewes is someone great to get inspiration from. What I think about this piece, it is OUTSTANDING. Two beautiful pieces of wood, beautiful lines, beautiful coloring and beautiful finish. 👍👍 What I think about your production is not so positive. The speed up video makes the process seem so frantic. 😟😟I don't need to see every cut you make. It would be more pleasing to watch if you just show the most important cuts at real speed. The sanding and finish was better. And you kept the finish labels on screen long enough for these old eyes to read them. 🙂Thank you for sharing. Have a great day and stay safe. 🙂🙂

@BrickhouseCraftWorks 2 жыл бұрын

Hi Glen, thank you so much for your kind words! I really do appreciate your criticism, both the good and the bad. It’s not always easy to keep the videos short enough that folks don’t lose interest without speeding them up but, I will definitely keep your comments in mind for my next video. Thanks so much!

@glencrandall7051 2 жыл бұрын

@@BrickhouseCraftWorks I get the same response from others. "Have to keep the video short". I don't advocate making the video longer. Devote the same amount of time to the parts you speed up. You show the same amount of time but in real time. So instead of showing 50 cuts so fast you show 5 cuts but in real time. You just pick the parts that are most interesting and or important. OK so now I am off the soap box.

@BrickhouseCraftWorks 2 жыл бұрын

Haha! Well, soapbox or not, I appreciate your comments, and I welcome the critique. I’ll try to keep them in mind and implement where I can.

@robcpwoodturner 2 жыл бұрын

Totally awesome work seth 👏 I wouldn't sell this one, although it belongs in a gallery 😀

@BrickhouseCraftWorks 2 жыл бұрын

You’re too kind Rob! I’m glad you think so! Thank you so much for watching, my friend!

@L_A_WOOD 2 жыл бұрын

Amazing work. Thanks for sharing! Likеd and subscribеd 👍😊

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much! Thanks for watching and for the sub, L.A.!

@moonwoodworks4607 2 жыл бұрын

Nice work, really like the shape of the bottom piece and the finial is a work of art. What is that "Ebonizing Fluid" that you used on the bottom? BTW you have a new subscriber.

@BrickhouseCraftWorks 2 жыл бұрын

Thanks so much, I’m so glad you liked it! The ebonizing solution is called iron acetate. It’s simply steel wool that is dissolved in white vinegar. It reacts with the tannins in the wood and makes it turn dark like that. Thanks for the sub!! Same to you.

@HodgePodgeWoodWorks 2 жыл бұрын

Great looking piece! Inspired by Jimmy Clewes? How do you like the HS sanding sealer? Can't believe you don't have a vacuum chuck yet! 😂

@BrickhouseCraftWorks 2 жыл бұрын

Haha! Yessir, it was inspired by Jimmy! The sanding sealer worked great, and I liked it much better than my homemade thinned down shellac. I know, I know….vacuum chuck is on the list! Lol

@qilai6384 2 жыл бұрын

This is an amazing piece, Seth, well done After seeing such a perfect work of yours, I would like to sponsor you a set of carbide wood turning tools, no grinding carbon tungsten steel bits, if you need I am willing to sponsor you a set for free, because you are an excellent craftsman, too like the work

@BrickhouseCraftWorks 2 жыл бұрын

Hello Qi Lai! Thank you very much for your kind words, and your very generous offer. Unfortunately, I’m going to pass. Thank you for your consideration, and for taking the time to watch!

@qilai6384 2 жыл бұрын

@@BrickhouseCraftWorks Okay, thank you for your reply, I am a turning tool maker and an avid wood turning enthusiast, the tool you are using now has problem points you can also provide to me that I can use to improve my turning tools, I have another dream to let all the enthusiasts like us use better tools, I will always support you, thank you for bringing us such a good work.

@jeffreyw9903 Жыл бұрын

How about a note on the lathe brand and tool brands, etc.

@BrickhouseCraftWorks Жыл бұрын

Hi Jeffrey, thanks for watching and commenting! My lathe is a Laguna 1836, and my tools are Thompson, and my bowl gouges have a 40/40 grind. If you have any other questions let me know and I’ll be happy to answer them! 😁

@dennisrood1469 2 жыл бұрын

👍🏻👍🏻👍🏻👍🏻

@BrickhouseCraftWorks 2 жыл бұрын

Hi Dennis, thanks so much for watching and commenting! I’m glad you like it!

@mstanifer1 Жыл бұрын

what kind of chuck are you using there?

@BrickhouseCraftWorks Жыл бұрын

Hi Mike! That is the Easy Wood Tool chuck. I’ve gotta say, I love it!

@terrybull541 2 ай бұрын

What is the wood ebonizing solution you use??

@BrickhouseCraftWorks 2 ай бұрын

Hello! Thanks for watching. It’s an iron acetate solution. It’s made by dissolving #0000 steel wool in white vinegar. Wash the steel wool in water and Dawn to remove the oil film that’s present in new steel wool. After it’s dried place the steel wool in a glass jar and cover with white vinegar. The best vinegar is that designed for cleaning rather than cooking but, any vinegar will do. Leave it until all the steel wool dissolves. Make sure you either poke holes in a lid, or cover with plastic so that gasses can escape and it doesn’t explode. After a few days, when all the steel wool is dissolved, you can strain out the excess bits, rust, and funkiness from the liquid then apply to the wood. Now, this only works for woods that have a high tannin content. This video was cherry which worked better than I expected, but not nearly as well as something like oak. You can increase the tannin content of any wood though by applying a black tea solution to the wood and allow it to dry, then apply the ebonizing solution. Hope this helps!!

@behroozaliakbari6852 Жыл бұрын

👋

@BrickhouseCraftWorks Жыл бұрын

Hello! Thanks for watching!

@robertboycewoodturningn.c.7838 2 жыл бұрын

Great job 👍. Love it. Would like to swop decals / stickers with you. Tried to send email but couldn't find your address. Subscribed

@BrickhouseCraftWorks 2 жыл бұрын

Hi Robert, thanks for watching and for the Sub! I’d be happy to swap stickers with you! My email is BrickhouseCraftWorks@gmail.com but, I just saw your message through Etsy. I’ll send you my address and get some stickers out to you this week. Thanks!

@Deadinaditchofficial Жыл бұрын

Sprezzatura- Italian word meaning “to make something difficult appear simple”

@BrickhouseCraftWorks Жыл бұрын

Hi Drew. Thank you for sharing this, and I love that description! I will definitely remember this one!

@thefish5861 2 жыл бұрын

I have the same bandsaw and the same lathe. How come the crap I produce doesn’t look as good as yours??

@BrickhouseCraftWorks 2 жыл бұрын

Haha!! Trust me, I feel the same way about my stuff too! We will always be our own toughest critic! On top of that, this particular piece isn’t even my own design, so I can’t even take credit for it. It’s a slightly embellished version of Jimmy Clewes’ square oriental box. The only advice I can give you is to look for inspiration everywhere, including to other turners. Lastly, focus on your honing your finishing regimen. Sanding and finishing should take as long or longer than it took to turn the piece. Thanks for watching!