Woodturning my aluminium handle on my Record Power lathe

No video

Woodturning my aluminium handle on my Record Power lathe

Рет қаралды 2,854

Glenn & Liza Teagle Woodturning & Carbide Chisels

Күн бұрын

In this video, I am demonstrating how I use my Carbide Woodturning tools to turn an aluminium handle. I also talk about my Record Power lathe.
This video is aimed at new turners using my Carbide Chisels.
To buy any of my tools or cutters visit my website;
ukwoodcraftand...
Thanks for watching.
Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.

Пікірлер: 31

@johnstpierre8909 25 күн бұрын

Nice job, like it.

@glennteagleofukwoodcraftca5308 25 күн бұрын

Thanks

@m.straughton Жыл бұрын

Great demo Glenn all it needs now is a clear lacquer to stop you from getting black hands whilst using it 😀

@glennteagleofukwoodcraftca5308 Жыл бұрын

Hi Mark. Thanks for your comment. Yeah I planned to do something like that. Got clear lacquer to do it.

@paulhubbard3691 Жыл бұрын

That was really interesting to watch nobody should doubt carbide cutters now thanks Glenn and Liza.

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thanks Paul. You'd think that was the case Paul, but there are still people out there calling carbides scrapers.

@pryere Жыл бұрын

I had that same problem with the RPM readout. Open the headstock cover, clean it out. The reader is the holed disc closest to the chuck. It fixes it.

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thank you for that. I'll check it out.

@jonathanflynn9467 Жыл бұрын

There was never any doubt in my mind. Thanks guys

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thanks Jonathan.

@mashmade-airth Жыл бұрын

Really interesting & good to watch Glenn proving to the doubters that carbides are so much more than scrapers

@glennteagleofukwoodcraftca5308 Жыл бұрын

I fully agree. That's what I am hoping to get out there. It's such a myth about carbides.

@peterhicks Жыл бұрын

It must be so hard for you sometimes taking the critique you must get Glenn, I really hope this video allays some of it but, probably not… I/we can only imagine what comments you get. Fantastic demonstration of your tools & cutters, not forgetting of coarse, your skills of Glenn

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thank you P, you will always have the carbide hater’s, takes all sorts to make a world.

@randyrockwell6136 Жыл бұрын

Great video showing just how versatile carbide chisels really are! Really enjoy your turning skills …. Almost as much as your friendly “waffling” 🤠🇨🇱

@glennteagleofukwoodcraftca5308 Жыл бұрын

They really are Randy. Glad you are enjoying the videos. We are enjoying making them. I've got plenty to waffle about. More to come.

@JimmyLee0757 Жыл бұрын

That was AWESOME DUDE!!!! Those are some amazing cutters. I don't think I want to put mine through that. I keep looking for some better cutters but they all look, pretty much, the same with a30 degree grind. I'm glad I watched the video, sometime back, where you talked about honing the carbides because that saved me from throwing useable cutters away. Thanks for sharing

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thanks Jimmy. My pleasure.

@michaelstubbs6319 9 ай бұрын

How did the hole get drilled and the 3 tapped holes must have missed a bit

@glennteagleofukwoodcraftca5308 9 ай бұрын

I drilled the holes on my drill press. The video was about turning the aluminium.

@GavSedae Жыл бұрын

Great video, Glenn. New subscriber! Is your 'smock' a golfing t-shirt? Where did you buy it please? Gonna check out your channel today

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thank you Gav and welcome to the channel. No, it is just a slip over top I bought from a Charity Shop. Up cycling. Perfect for woodturning as the wood doesn't stick to it.

@GavSedae Жыл бұрын

@@glennteagleofukwoodcraftca5308 Nothing wrong with a charity shop bargain. I've found loads of good stuff in ours

@glennteagleofukwoodcraftca5308 Жыл бұрын

@@GavSedae you get loads of stuff. A lot are still new, with labels on.

@swampyindustries6718 Жыл бұрын

Nice to see Glenn, I've got a lump of aluminium billet for the base of a resin table lamp I'm planning to do this year. Glad I got your cutters to do it with.

@glennteagleofukwoodcraftca5308 Жыл бұрын

@@swampyindustries6718 nice one. Just remember don't use them flat. Let me know how you get on.

@Anilm3 Жыл бұрын

At this point no one can doubt the quality of your cutters, but this demonstration takes it to another level, absolutely impressive. Do you recommend the normal cutters or the negative rake ones for brass? I hadn't thought of it before, but after seeing this demonstration I might try to make some brass handles for a cabinet I've got.

@glennteagleofukwoodcraftca5308 Жыл бұрын

Hi Anil, I would only recommend the normal cutters/ the ones I used. You want to use them to cut not scrap

@glennteagleofukwoodcraftca5308 Жыл бұрын

Sorry meant scrape