Woodturning | Off-Center Pendant

Рет қаралды 14,730

Жыл бұрын

Tools I used in this video.
Robust lathe if you have any questions jacobson68@yahoo.com
Easy Wood Parting Tool www.easywoodtools.com/
Spindle Gouge thompsonlathetools.com/
Off-Center Jig nilesbottlestoppers.com/
Doctors Walnut oil nilesbottlestoppers.com/
Sandpaper amzn.to/39xGeV1
Pull saw amzn.to/34npAG4
RZ Mask amzn.to/3aCp0pA
Tape SpecTape
Beading Tool d-waytools.com/
YOU CAN ALSO FIND ME:
= www.etsy.com/shop/Thewoodshoptv
= www.thewoodshop.tv/
= thewoodshop...
= / thewoodshoptv
Robust Lathe Dealer- jacobson68@yahoo.com
THANK YOU FOR SUPPORTING MY SPONSORS!
Easy Wood Tools- www.easywoodtools.com/
Woodcraft: www.woodcraft.com/
Carolina Shoe: www.carolinashoe.com/
Niles Bottle Stoppers nilesbottlestoppers.com/
Music
epidemicsound.com
#woodturning #turning #carljacobson
Hi my name is Carl Jacobson,
I started woodworking with my grandfather as a young boy. I continued woodworking through high school, and started woodturning after seeing a turned project in a friends shop. Some of my fondest memories are working with my grandfather in his wood shop. Being able to share our passion for woodworking, ties it all together. We also do a lot of epoxy projects as well as woodturning.

Пікірлер: 111

@Oonagh72 Жыл бұрын

That is so pretty!! I hope you and Robin feel better soon!!!

@gbwildlifeuk8269 Жыл бұрын

She's definately sneezing better 😁

@robinjacobson9616 Жыл бұрын

Thank you!!

@CarlJacobson Жыл бұрын

Thank you!!

@TexasTurnings Жыл бұрын

Shopping list: Niles offset jig,beading tool, and double sided tape. Great ideas Carl, and welcome to Texas we have four seasons, cedar, ragweed, grass, and hay fever.😏

@CarlJacobson Жыл бұрын

LOL Thank you Don!!

@SteelBladeWoodworks Жыл бұрын

Awesome video Carl!!! Now that I have seen the jig in use, I can see the endless possibilities!!! Super cool.

@CarlJacobson Жыл бұрын

Thank you brother!! It really is awesome!

@brokenbranchwoodshop1873 Жыл бұрын

Poor Robin 🥹 still not feeling well but being a great camera woman!

@robinjacobson9616 Жыл бұрын

Thanks Mark!! ❤️

@valborchardt3596 Жыл бұрын

Aaaaahhh so sorry to hear you are both not well, i hope you get better soon…..those pendants are gorgeous…..take care as always, much love from South Africa

@CarlJacobson Жыл бұрын

Thank you Val ❤ We're getting better :) Take care!!

@JimmyLee0757 Жыл бұрын

Thanks for sharing this Carl. These are pretty cool and just another reason why we don't have scrap wood.

@CarlJacobson Жыл бұрын

Thank you Jimmy!! I agree 100%

@fouroakscrafts7240 Жыл бұрын

That's a beautiful pendant! Thanks for demonstrating the jig - very cool.

@CarlJacobson Жыл бұрын

Thank you very much!!

@glencrandall7051 Жыл бұрын

I've seen the offset fixture before but not demonstrated this well. It's now on my definitely needed list. 👍👍Thank you for sharing. Get well soon. 🙂🙂

@CarlJacobson Жыл бұрын

Thank you so much Glen!! You're going to love it!

@sapelesteve Жыл бұрын

Excellent video Carl! Hope that you guys feel better soon! Be well & stay safe! Have a terrific weekend! 👍👍

@CarlJacobson Жыл бұрын

Thank you so much Steve!! Have a good weekend :)

@kris_kreations Жыл бұрын

That is so neat, Carl. Love it. I hope you and Robin are feeling better. Get well soon. 💗

@CarlJacobson Жыл бұрын

Thank you Kris!! ❤

@BrickhouseCraftWorks Жыл бұрын

Beautiful pendant Carl! That’s quite an awesome jig!

@CarlJacobson Жыл бұрын

Thank you very much Seth! It really is cool!!

@timothychk Жыл бұрын

beautifully done .. cheers Tim

@CarlJacobson Жыл бұрын

Thank you Tim! Cheers!

@jackthompson5092 Жыл бұрын

Pretty neat Carl. More toys for the lathe and more things to do with wood scraps. Well done.

@CarlJacobson Жыл бұрын

Thank you Jack!! Definitely a lot of fun!

@jlarts Жыл бұрын

Something like this makes me rethink whether I want to invest in a lathe, I reckon even with a mini lathe this would work a treat

@CarlJacobson Жыл бұрын

You can do a lot with a mini lathe, it's a lot of fun!! I had one for years!

@JordanWoodwerx Жыл бұрын

Thanks for the demo! I need to use that jig more! Pendants look killer! Hope you guys are feeling gooder! 😃

@CarlJacobson Жыл бұрын

Thank you brother! Have fun with it!

@MarklTucson Жыл бұрын

Lots of possibilities with this. Haven’t had a chance to use mine yet, but looking forward to doing so. Hope you and Robin get to feeling better soon

@CarlJacobson Жыл бұрын

Thank you so much Mark! Have fun!

@shastastan1935 11 ай бұрын

Great idea with the beading tool. I'll be using the Easy Wood beading cutters when I try this. Thanks

@CarlJacobson 11 ай бұрын

Thank you! It's a fun project.

@jayscott306 Жыл бұрын

Great demo and beautiful pendant, Carl! Enjoying the new camera work, also.

@CarlJacobson Жыл бұрын

Thank you so much Jay!! It's the same camera work, (Robin does all the filming) but maybe a different style? This video we wanted to show the whole prosses.

@LewisKauffman Жыл бұрын

Thanks! That's an awesome jig!

@CarlJacobson Жыл бұрын

Thank you Lewis!! It really is :)

@jimneely4527 Жыл бұрын

That's a nice little gadget! I may have to order one. Thanks for sharing.

@CarlJacobson Жыл бұрын

Thank you Jim!! It's a great little jig!

@glenmckelvey5952 Жыл бұрын

Cool pendant looks beautiful . I got your gift a week and a half ago I sent you an email just wanted to thank you again I love. Feel better guys take care .

@CarlJacobson Жыл бұрын

Thank you so much Glen! I'm glad it got there safe and you love it :) I saw the email but we were in pretty bad shape :( We're getting back to normal now though! Take care buddy!!

@robertocoiante1981 Жыл бұрын

Carl, sei un grande. continua sempre così. grazie

@CarlJacobson Жыл бұрын

Grazie molte!

@markv1027 Жыл бұрын

Nice video Carl. One could do a lot of cool patterns with that jig. You two get to feeling better and thanks for sharing!

@CarlJacobson Жыл бұрын

Thank you very much Mark!!

@williamellis8993 Жыл бұрын

That's really nice, Carl. I'm glad to see you back to doing your eccentric (get it? eccentric double meaning?) turnings again. Bill

@CarlJacobson Жыл бұрын

lol Thank you Bill!!

@davidmorgan7522 Жыл бұрын

That's cool Carl! Take care, Dave

@CarlJacobson Жыл бұрын

Thank you Dave! Have a good one!

@cortlandhunt4721 Жыл бұрын

Good to see you and Robin at SWAT. Hope you guys did well$$$.

@CarlJacobson Жыл бұрын

It was nice to you too Cortland! SWAT is always a great show! :)

@gpanizzolo6090 Жыл бұрын

Hola Carl! Gracias por compartir tan excelente trabajo! Felicitaciones! Un abrazo! Germán, Montevideo, Uruguay.

@CarlJacobson Жыл бұрын

¡Muchas gracias!

@markchoitz443 Жыл бұрын

neat project Carl and coool jig - maybe put that on the Christmas list. Get better soon.

@CarlJacobson Жыл бұрын

Thank you Mark!! Have a good weekend buddy!

@jerrystreeter4692 Жыл бұрын

Very nice, I’ll need to add that jig and the beading tool to my “need to buy” list. BTW, we spoke at SWAT about chucks and I did take your advice. Thanks, Hope you two get to feeling better sooner.

@CarlJacobson Жыл бұрын

Thank you Jerry!! I'm glad I could help, you're going to love the chuck!

@jpwoodwork Жыл бұрын

very cool little jig ya got's there Carl............BLESS YOU Robin :D

@CarlJacobson Жыл бұрын

lo Thank you Jamie!! It's a great jig!!

@WoodenItBeNice Жыл бұрын

Brilliant Carl. I have just bout the Robert Sorby Eccentric Chuck System so looking forward to trying something like this one it when I can pick it up from a friend of mine. Great video carl. Take care. Cheers, Huw

@CarlJacobson Жыл бұрын

Thank you buddy! That's great and you're going to love it! Have a good one!

@ConnieConnie824 Жыл бұрын

Love it 💜

@CarlJacobson Жыл бұрын

Thank you Connie!! 💜

@blumax413 Жыл бұрын

Loved your video. Thank you for the goose stopper that is what I am going to try and make first I have the stopper on display with Mike Mahoney plater and Stuart Batty’s bowl and Tod Raines miniature dish

@CarlJacobson Жыл бұрын

Thank you Rick! It was nice seeing you at the show!

@wardwilson3216 Жыл бұрын

Interesting device, thanks for sharing. Hope ya'll feel well soon

@CarlJacobson Жыл бұрын

Thank you very much Ward!!

@DougMilleratWoodSpunRound Жыл бұрын

Great job. Thanks

@CarlJacobson Жыл бұрын

Thank you Doug!!

@robertbetts101 9 ай бұрын

bless you!

@brokenbranchwoodshop1873 Жыл бұрын

Wow! That turned out awesome! And those pictures of the others..insane! Can’t wait to use mine. #belikecarl

@CarlJacobson Жыл бұрын

Thank you brother!! The only limit is your imagination!

@dbeck717 Жыл бұрын

I have the older model. I like the upgraded version

@CarlJacobson Жыл бұрын

The older model is still really cool, but this gives you a few more options.

@rickgibson7876 Жыл бұрын

Looks good Carl. I bought that jig from Ruth several years ago but haven't used it much. If it's the same jig Ruth was selling years ago there is an excel spreadsheet program out there that will let you input the holes you are thinking of using, size of pendant and it will draw the the finished pendant for you. Saves guesswork as to what the finished pendant will look like. It also works with the open office spreadsheet and it's free for those who don't want to pay the big bucks Microsoft wants. Also works on my android tablet.

@CarlJacobson Жыл бұрын

Thank you Rick!! With the link I put in the description the PDFs are on that page, but I should of mentioned that in the video! Yes it's the same jig Ruth has been selling :)

@ohadam9071 Жыл бұрын

Very cool

@CarlJacobson Жыл бұрын

Thank you!!

@alexclark6777 Жыл бұрын

I love the fact it has some sort of fractal style to it, like a seashell made of burl. Is it my imagination or did I see a psychedelic Death Star in the other ones you did? Glad you're both back making videos!

@CarlJacobson Жыл бұрын

Thank you so much Alex!! lol Maybe? Those are from our gallery on the Niles website.

@kgwoodturning Жыл бұрын

Bless you Robin at 5:51 😂😊

@CarlJacobson Жыл бұрын

❤ Thank you Kieran!!

@PerikovRemont Жыл бұрын

👍👍👍

@Ron_Radliff Жыл бұрын

Super job just at the right time as I need to make a few. That new version of the off center gig looks really nice compared to the older model that I have. Must be something to do with that new big corporation that took over the Niles Bottle Stoppers company. LOL

@CarlJacobson Жыл бұрын

LOL Thank you Ron! I was at your shop earlier today but I didn't see you! 😉

@Ron_Radliff Жыл бұрын

@@CarlJacobson I guess I saw Robin's post too late and you'd already left. I know the garage door was locked, but you should have knocked. I was just inside, watching Cap'n Eddie youtubes. Really good stuff, you should watch them some time. He can teach you a lot. LOL

@monophoto1 Жыл бұрын

If you drilled out the mounting hole using a brad-point bit before shaping the area around the hole, you could probably minimize the amount of sanding that you have to do while also managing the thickness of the wood immediately surrounding the hole. I've made lots of these - they make great zipper pulls for sweaters and fleece jackets.

@CarlJacobson Жыл бұрын

Great tip! Thanks!

@AndrewArndts Жыл бұрын

The one issue I have with mrs. niles' jig is that it ain't safe to use if you have a midi or mini lathe. your robust beastie is good as it weighs what 700 or 800 pounds. using it on a 100 pound midi is just asking for trouble personally. I had one some 8 or so years ago, sold it before I actually used it. tested it out and it shook the (Expletive!) outta my lathe and I had it bolted down to a 250 pound bench too.

@CarlJacobson Жыл бұрын

I'm not sure what you were turning, but it sounds pretty heavy. She's sold hundreds of these to people with small lathes, and you're the first person that has said there was a problem. This jig is for pendants, bottle stoppers, and small boxes etc. We had someone demonstrating them at the last show on a Jet mini lathe just on a stand with no problems.

@MANJITSINGH-ko2oi Жыл бұрын

HI carl u r good infact very good.

@CarlJacobson Жыл бұрын

Thank you so much!!!

@kgwoodturning Жыл бұрын

Carl this turned out beautiful!! That heading tool looks much different than the ones I'm use to seeing. What size is that one? Another stunning piece for real!

@CarlJacobson Жыл бұрын

Thank you buddy!! It's a D-Way 3/16" It's my favorite one!

@kgwoodturning Жыл бұрын

@@CarlJacobson thanks! I was looking at getting the two tool set. What other size would you recommend?

@TrevorDMcClung Жыл бұрын

Have you ever heard of a "Saueracker Shell"? It's a similar technique but produces a much more interesting pattern. I've turned quite a few myself but unfortunately little information exists online about them.

@CarlJacobson Жыл бұрын

I've never turned one, but a friend of mine turned one a long time ago. Here's a link if you haven't seen it, kzfaq.info/get/bejne/h9t9naSH2LfZd3k.html

@jlsuter91 Жыл бұрын

Very nice! What size beading tool are you using for this particular project?

@CarlJacobson Жыл бұрын

Thank you!! It's the 3/16"

@MakingItOutOfTheWoods Жыл бұрын

Carl! Awesome as always. Do you have a link to buy the off centre plate and bottle stopper mandrel please? Never seen them here in the UK 🇬🇧 hugs to Robin xx

@CarlJacobson Жыл бұрын

Thank you so much Claire!! ❤ Here's a link :) nilesbottlestoppers.com/product-category/off-center-jig/

@gtrudel7247 Жыл бұрын

Great video, the necklace with earings would make a great Christmas present.Where can I purchase an offset Mandrel.

@CarlJacobson Жыл бұрын

Thank you!! Here's the link to the jig, and the mandrel comes with it. nilesbottlestoppers.com/product/joyner-off-set-complete-kit/

@charleskallay5484 Жыл бұрын

Hi Carl Great demo! I'm assuming you can use the Niles tapered mandrel in this operation. Did I also correctly that everything you need to this pendant comes with the jig.

@CarlJacobson Жыл бұрын

Thank you very much Charles!! Yes everything comes in the kit, including the mandrel. The jig mandrel doesn't have the flute cut in it, so there's less chance of cross threading the jig.