Woodturning the worst piece of firewood, with no tear-out using just my carbides

Рет қаралды 4,452

Glenn & Liza Teagle Woodturning & Carbide Chisels

Жыл бұрын

In this video, I am turning a bowl from a piece of firewood, using my Carbide Woodturning tools. More tips not to be missed.
This video is aimed at new turners using my Carbide Chisels.
To buy any of my tools or cutters visit my website;
ukwoodcraftandcarbidechisels.co.uk/
Thanks for watching.
Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.

Пікірлер: 62

@joesuelter1636 5 ай бұрын

Make a video of how to make your sanding paste! Another great video

@alangibb3100 5 ай бұрын

Glenn and Liza that wee bowl turned out really lovely even although it was puncky wood, some lovely spolting as well.

@glennteagleofukwoodcraftca5308 5 ай бұрын

Amazing what you can get from a bit of firewood.

@user-jim-kelly 5 ай бұрын

Hiya folks, more proof that the Carbide naysayers are wrong. A beautiful finish can be achieved using "scrapers!" Obviously the right person turning helps a bit so please keep on teaching us. During the video you mentioned a company six hours away that supplies you with wood, i heard it as Stonebase but can't find them on line... Could you please let me have a linnk to them? Thanks and my brand new SCH5 is SUPERB!

@glennteagleofukwoodcraftca5308 5 ай бұрын

Hi James, it was Styles and Bates but they are closing down at the end of March. Carbide woodturning tools are only scrapers, if they are used as scrapers. Glad you are enjoying using your SCH5.

@JimmyLee0757 Жыл бұрын

That turned out AWESOME. The lessons you've been teaching us have been a blessing. Today, my square carbide did things others say it can't do and shaving were flying everywhere. I keep watching your videos I'll have a PHD in carbideology🤣

@glennteagleofukwoodcraftca5308 Жыл бұрын

Welcome to the dark side. May the carbide force be with you.

@JimmyLee0757 Жыл бұрын

@@glennteagleofukwoodcraftca5308 🤣🤣

@alanthewoodpecker6581 Жыл бұрын

Your demonstration is 1st class Glenn When you make your next batch of sanding paste make me one mate 😂

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thank you. 😛

@davidtyers4903 Жыл бұрын

Or even do a video so we can make our own.

@davidtyers4903 Жыл бұрын

As always both a great and informative video. I reccomnended your carbite chisels to friends and they have just ordered your standard set and ultimate hollowed. Yet another convert.

@glennteagleofukwoodcraftca5308 Жыл бұрын

@@davidtyers4903 Thanks David. Welcome to the dark side. May the carbide force be with you.

@glennteagleofukwoodcraftca5308 Жыл бұрын

@@davidtyers4903 There are too many people who copy ideas and like to claim it as their own. It works for me, the way I turn.

@mpham321 Жыл бұрын

Nice! I have a really punky piece of birch I'm going to try!

@glennteagleofukwoodcraftca5308 Жыл бұрын

Let me know how you get on.

@rusty633 6 ай бұрын

You should do a workshop tour , that would be interesting

@glennteagleofukwoodcraftca5308 6 ай бұрын

Oh no, can't give all my secrets away.

@donjohnson24 Жыл бұрын

Thanks, Glenn, for answering my query on sanding paste, and incidentally, the reason for using sanding sealer. The instructions that come with these sort of products always say 'how' to use them, but rarely explain 'why'. After watching your last couple of videos I am casting covetous eyes on my pal's open fire woodpile. You really proved your points about how to achieve fine finishes, and I do hope you keep that very pretty little bowl - which I'm sure Lisa won't let you put on the fire. May I also add what a splendid job Lisa does with the camera, always getting us the best view by constantly changing position and zoom, as you caress the wood to its final shape. Did she have professional training - or is it just natural talent?

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thanks Don. Yes, Liza did make me keep the bowl. 🤪I thought she would. Don, it's pure luck she can video. Lol. No honestly, she is doing a good job. I had made an arm to hold the camera, so I could film myself turning, but it's awkward as I can't see if I am getting in the way of the camera sometimes. Liza finds using the tripod better as she can follow me and get in closer to get those close up shots.

@kevinkroll4247 Жыл бұрын

Your a great teacher, so very positive. Thanks

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thank you. Much appreciated.

@gwynneclark6372 Жыл бұрын

Greetings from Australia . A true crafts man and I am glad to find another carbide turner

@glennteagleofukwoodcraftca5308 Жыл бұрын

Welcome to the channel. Thank you for your comment. Well appreciated.

@alanthewoodpecker6581 Жыл бұрын

Masterpiece from firewood Great job

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thanks Alan

@Ronalcock1 Жыл бұрын

Well done Glen, you should have been a magician.

@glennteagleofukwoodcraftca5308 Жыл бұрын

What? I am.

@rwyse1 Жыл бұрын

Hi Glenn and Liza another great video and a good laugh too I must admit I'm doing a lot less sanding now and turning a lot better keep the videos coming

@glennteagleofukwoodcraftca5308 Жыл бұрын

Nice one. Less sanding. Save our beaches.

@GaryGlass-DriftwoodTurner Жыл бұрын

nice one Glen, amazing what you can find in the firewood pile!

@glennteagleofukwoodcraftca5308 Жыл бұрын

It really is Gary. Cheaper too.

@royrogers4788 Жыл бұрын

Hi Glenn bought a set of your carbide’s a few years ago since you been on KZfaq I have learned to use them better would be nice to see you make a set

@glennteagleofukwoodcraftca5308 Жыл бұрын

No Roy, that's my business, my livelihood. KZfaq is just an avenue to show people who have bought my chisels, how to use them correctly and how they can get clean, smooth finishes.

@Woodturningwithbarry Жыл бұрын

Nicely done again Glenn

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thank you Barry

@peterhicks Жыл бұрын

Aced again you guys, top, top video 😊

@glennteagleofukwoodcraftca5308 Жыл бұрын

Thanks P.

@williamkeay5692 5 ай бұрын

I loved watching this video Glenn, but is there a reason why you didn’t use the SCH 3 on the inside of the bowl? Keep them coming guys. Bill.

@glennteagleofukwoodcraftca5308 5 ай бұрын

It was because of the cut I wanted to demonstrate.

@Anilm3 Жыл бұрын

Very impressive result for such a nasty piece of wood! I might have missed something on a previous video, but what is going on with the sandpaper? You don't seem to be changing grits at all, but the result would suggest otherwise...

@glennteagleofukwoodcraftca5308 Жыл бұрын

Well I do keep telling people how good I am. The proof is visible. My method works. I do say when I'm changing grit. I go from 180 to 320, sometimes to 400. The sanding paste does the rest. It has been mentioned a few times about my sanding. But how can you explain the finish I get?

@Anilm3 Жыл бұрын

@@glennteagleofukwoodcraftca5308 I am even more confused now

@donjohnson24 Жыл бұрын

@@Anilm3 He has a pre-prepared stack of strips of gradually increasing grit numbers of sandpaper on the lathe bed, and swaps them off camera. They are all the same brand/colour so it appears that he is using just one strip for the whole process prior to the sanding paste.

@Anilm3 Жыл бұрын

@@donjohnson24 Thank you, that makes more sense.

@mnp1964 5 ай бұрын

It might be punky Glenn but it sure is pretty. You sure do a nice job with the carbide gauges. You said you make your own sanding paste if you don't mind me asking what goes into making it. Blessings to you and Liza

@glennteagleofukwoodcraftca5308 5 ай бұрын

That is my own paste. I don't give the details out. Plenty available around.

@robbiediaz7635 4 ай бұрын

did you have to do any grinding on your carbide tool holders to allow you to "ride the bevel" or was there enough clearance on the original handles?

@glennteagleofukwoodcraftca5308 4 ай бұрын

If you buy tools from the website, they are made to do the cuts I do.

@adecairey9263 Жыл бұрын

hello Glen , Lisa and of corse the dogs can i ask will you ever be doing a video on the way you make your waxes and paste ? or is this one of those if i tell ya , ive got to kill you type deals. i have watched a couple of vids on the process but i found them to be a bit confusing in the way that they were explained. just curious thats all. well am off now Thank you for yet another great video LISA please give the dogs a pat from me

@glennteagleofukwoodcraftca5308 Жыл бұрын

No Ade, there are too many people who take other's ideas and claim it as their own. I make mine as it works for me, the way I turn, at speed.

@sammyjamal9930 Жыл бұрын

Great job on these videos. I have been watching for a couple of months now :) I have been looking at your face shield with the filters and have not been able to find any like your. What brand is that if you don't mind? thank you

@glennteagleofukwoodcraftca5308 Жыл бұрын

I have a video on the Axminster APF 10 Evolution Powered Respirator. Link at kzfaq.info/get/bejne/frijnrB6v6vOZHk.html

@bubberinbrunson5975 Жыл бұрын

Is the formular and procedure for making your sanding paste a secret or will you share it.

@glennteagleofukwoodcraftca5308 Жыл бұрын

No I won't share it. Too many people want to take your ideas and call it their own unfortunately. It works for me, for how I turn. Can't give all my secrets away, otherwise everyone would be as good as me. 😀😛

@alanthewoodpecker6581 Жыл бұрын

@@glennteagleofukwoodcraftca5308 if you make it we will buy it 😂

@christopherharrison6724 5 ай бұрын

Question what is sanding sealer .I use oil,shellac and finally beeswax .

@michaelwillson6847 4 ай бұрын

Amazing video glen. Sorry been on this one since late last night. Jumping over to today's video. I have an abundance of this kinda wood so certainly something i can practice with. I no you say its going in fire but take that one what kinda price would you put that at?? 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍🤔 Oh and can u make have u made a video on your paste finish??

@glennteagleofukwoodcraftca5308 4 ай бұрын

Thanks Michael. I don't sell these sorts of things. Only doing them for the channel. No, I won't be making any videos on the pastes I use or how I make my chisels.

@michaelwillson6847 4 ай бұрын

@@glennteagleofukwoodcraftca5308 no worries worth asking about the paste. I'll need figure something else out to use instead if ever needed. 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

@glennteagleofukwoodcraftca5308 4 ай бұрын

@@michaelwillson6847 Mine I make myself. It works for me, the way I turn.