Live Edge Slab Coffee Table
Рет қаралды 651,585
Күн бұрынWatch our latest video! "Refinishing a Retro Heywood Wakefield Desk With A Stunning New Look!"
• Transforming A Retro H... -~-
Check out the full post on our website: www.thewoodwhisperer.com/video...
One of the most exciting things about moving to Denver is that I now have access to more live edge slab material. We needed a new coffee table and I also wanted to build something that would showcase the new Wood Whisperer Thread Taps, so a simple Live Edge Slab Coffee Table with metal legs fit the bill nicely.
Links:
CS Woods: cswoods.com/
West System 105 Resin: amzn.to/2kwbdeL
West System 205 Hardener: amzn.to/2lnTwOj
Epoxy Pumps: amzn.to/2kPwH2h
Sandblasting Gun: amzn.to/2kPpTBY
Abrasive Media: amzn.to/2lo71gJ
Minwax Wipe-On Poly: amzn.to/2kPApcm
Wood Whisperer Thread Taps: wwthreadtaps.com/
SUBSCRIBE!
kzfaq.info_c...
TAKE YOUR WOODWORKING TO THE NEXT LEVEL
thewoodwhispererguild.com
CHECK OUT OUR SHOP TOURS
www.thewoodwhisperer.com/shop-...
GET INSPIRED BY OUR VIEWER PROJECT LIBRARY
www.thewoodwhisperer.com/viewe...
DOWNLOAD OUR FREE APP
Android: bit.ly/1MQ4ks1 or iOS: bit.ly/177u4An
WIN FREE TOOLS!
thewoodwhisperer.com/giveaway
TAKE A VIRTUAL TOUR OF MARC'S SHOP
www.thewoodwhisperer.com/marcs...
SUPPORT OUR FREE VIDEOS
thewoodwhisperer.com/support
CONNECT WITH US!
Use our contact form: thewoodwhisperer.com/contact
Twitter: / woodwhisperer
Facebook: / thewoodwhisperer
Pinterest: / woodwhisperer
@keithdecker1164 7 жыл бұрын
Just a suggestion from my boat building experience. With epoxy on wood there is a wood process called gassing, where the wood will release air into the epoxy. To help in absorbing the resin you can use this gassing process to your advantage by reversing it. Bring your wood temperature up to around 80* or about 10* higher than the room you are working in. Then mix and apply the epoxy resin. Now allow the wood to start cooling back down to room temperature (68-70*). This process actually makes the gassing work the opposite direction and causes the wood to suck the epoxy in deeper and not create bubbles. Great work
@aaronblakely5873 7 жыл бұрын
Thank you for that, Fantastic tip.
@MaghoxFr 7 жыл бұрын
I love finding awesome comments like this one. Question: how would you warm a big slab like that one? Sun exposure?
@MNhockeydude35 7 жыл бұрын
heated blanket...
@matthewowens6031 5 жыл бұрын
Thanks for that info 😎👌
@reidklassen5096 5 жыл бұрын
thats a cool tip!
@MattFeith 7 жыл бұрын
Man, this was the best video I've seen so far for live edge prep - nice work!
@brentwhite 7 жыл бұрын
Thumbs up for the supporting your local craftsman! Beautiful slab, looks great.
@franklloyd96 11 ай бұрын
This table arrived well packaged and on time. kzfaq.infoUgkxn94T8Mu1iMnsLCMNOI9srXSsLkI4JXKW Like another reviewer advised, I pulled everything out and made sure everything was included (everything was!). I built it alone and it took me about an hour. The color is great and for the price the lift part works well. As others have mentioned, it’s not the smoothest opening/closing, but it works. The screws do show, but I plan to order white sticker covers if that bothers us too much. Really happy with this table! UPDATE: it’s been over a year since we got this coffee table and we still love it! It gets HEAVY use as our dining table, foot rest, and school desk. Over time, the opening and closing mechanism has gotten smoother. I added a new photo with the white screw cover stickers. They blend in perfectly and make it look a little cleaner. 100% recommend!!!
@KingsFineWoodworking 7 жыл бұрын
Excellent use of the taps.
@Slovenianwoodworker 7 жыл бұрын
Nice one.. I do a lot slab benches and live edge tables too. People just love it when i deliver to them. Good luck
@dasrockness 7 жыл бұрын
This was a perfect video. I have a live edge walnut slab sitting in my garage and I have been wanting to do this but didn't really know where to start. Thanks!
@Thecollaborator1990 7 жыл бұрын
Very nice Marc!! I love any types of Krenov work where you let the wood be what it is. Mother Nature is truly beautiful. Thanks for showing us the sand blasting I always wondered about that. Can't wait to meet y'all one day!
@JohnTHull 5 жыл бұрын
Love this Mark! Thanks for breaking it down into simple processes.
@espiworkshop4366 5 жыл бұрын
Amazing look! Also I’m glad you speak in your videos it makes it more pleasant to watch, thank you.
@woodmeister14467 7 жыл бұрын
Loved the tip on using CA glue to seal cracks. Will save me a lot of lost epoxy. Excellent video. Thank you.
@dondonaldson1684 5 жыл бұрын
Mark, I have used the WW wood taps into black walnut to mount steel legs onto a 40x84 table top. The taps that you developed with Andy Klein are simply awesome. I did tests on 1-1/2" thick black walnut scraps and was surprised how strong the threads are. I could recess a washer full depth into the black walnut's surface. Love your videos and the cracks that you come up with using bad puns like this one. All the best, DD.
@philporada5655 7 жыл бұрын
Thank you, your epoxy work gave me the confidence I need to finish my walnut tables. You made the dirty work not scary. I've got large voids that run through my tables and it's my first job using epoxy. I made a mess the first time because I poured too much epoxy and the weight of it sagged the tape.
@richardshaw3094 7 жыл бұрын
You are a very good teacher. Thanks for sharing all your knowledge. Nice table
@travisbrumfield638 7 жыл бұрын
Love it would rather go there over Disney any day your an amazing craftsman Mark, feels weird calling you by first name but I have been following content for so long I feel that we're on a first name basis my name is Travis by the way and I thoroughly enjoy watching your videos and learning new skills from each and everyone of them keep up the amazing work you're a rockstar in the woodworking content creation world of KZfaq
@polczym Жыл бұрын
Good video. Although I've been a novice wood worker my entire life (63 years), I'm just starting to work with Live Edge projects and I appreciated you mentioning the tool names and specific products that you used. Thanks again. Mark from Sugar Island, MI.
@zogthehog 6 жыл бұрын
Marc, I'm really glad I came across this video, I am a woodworker as well, and from Ohio, so I have easy access to low priced local hardwoods right down the street. I am relocating to Denver in two weeks and was worried I was going to have a hard time finding lumber, but I guess not!
@sscottross3964 7 жыл бұрын
I'm really enjoying the new videos from the new shop. Keep up the great work!👍🏽
@fwanknmt 7 жыл бұрын
Great techniques all rounded up in a single video, thanks!
@ParsaMohebiMD 5 жыл бұрын
Nicely explained! It motivated me to go get a piece of wood and start working on in now! Thank you,
@sumosprojects 7 жыл бұрын
Absolutely love the end product, your a fantastic woodworker & present everything perfectly 👍
@erickfarigole8697 4 жыл бұрын
Hello. I have really appreciate this video. You are very clear (I am french so I don't understand all the names of the tools), perfectly explain. And of course, I love the result. I am just sad not having visited CS shop when I was in Denver in 2012, and even more, not to know such a wonderfull shop here in France. Bravo for your video
@nicolasfredette8564 5 жыл бұрын
Exactly what I was thinking about the thin steel legs - To not take away from that gorgeous slab. Great project, man !!!
@vks4392 2 жыл бұрын
This is one beautiful wood works I have come across. Excellent work !!!
@TimyMac_MakerApprentice 7 жыл бұрын
Nice table. Never realized making a live edge anything could possibly be that easy. Thanks for the lesson.
@wortheffort 7 жыл бұрын
Nice table and really good editing.
@grapplergirl10 Жыл бұрын
This video was exactly what I needed. Thanks. Now I just need to figure out a way to spice up my live slab white oak bench.
@baldemarcantu5135 4 ай бұрын
Just beautiful. Well done!
@josekma1 3 жыл бұрын
Doing my first live edge coffee table, thanks for your tutorial
@gizanked 7 жыл бұрын
There is a CS hardwoods in Minnesota but the "cs" stands for "cremona's shed"
@mikethompson6713 6 жыл бұрын
James Wright (wood by Wright) got some slabs from Matt Cremona
@FAD75 6 жыл бұрын
awesome video dude. Thank you, have been looking for a video on this, and have wanted to try my hand at making something with a live edge for awhile. Kept getting hung up on LEGS and how to keep them from taking away from the inherent beauty of the wood itself, but to still function properly.
@Gotwoodworkshop 7 жыл бұрын
really enjoyed seeing you do a project like this! Gives a much better sense of the proper way to go about doing it, super jealous of that lumber store though!
@GadgetAddict 7 жыл бұрын
That sand blasting tool was really interesting.
@amjadhani8929 4 жыл бұрын
Beautiful. The finish looks very natural
@johngonsalves2305 7 жыл бұрын
CS is a super cool place . I like just walking around sometimes for lunch just to see what they have.
@erikwolfe3187 7 жыл бұрын
Ha, I was just at CS Woods in Den. yesterday looking at some slabs for a desk. That place is freakin' amazing! Nice work Marc...
@RobinLewisMakes 7 жыл бұрын
Busy working on a slab, also using wipe on poly, and like you I ended up using a brush. Couldn't get as good a finish until I switched to the brush. Great video as always man
@lukassmid4112 7 жыл бұрын
Omg, so many beautiful woods, but that's wonderful
@MojojoJenkins 7 жыл бұрын
Great work, man! The table came out beautiful!
@snowypirate07 7 жыл бұрын
Nice plug for your taps, looks like a great product!
@peterantolin5740 6 жыл бұрын
nice job! like the details of the process..also would love to see that warehouse.thanks!
@bobputman5947 7 жыл бұрын
Beautiful table, Walnut is my favorite, and i have worked with slabs for many years and they really turn my wheels....nothing like a new table that has been crafted with some good ole honey nut cheerio's, thanks Mark...how do you guys like Colorodo.....its going to beat the heck out of Arizona heat, i know, i lived in Mesa for about 10 years....then i went to Alaska, now that was heaven.
@howimade3309 7 жыл бұрын
looking foward to the todays live !
@ivanaguilar8820 4 жыл бұрын
dude! your channel is amazing! keep up the hard work. been learning a lot
@auredavids2489 7 жыл бұрын
great to see another woodworking project! keep them coming brother!
@keithrefior6990 7 жыл бұрын
Welcome to Denver! Pretty awesome place to live.
@Hubbmade 7 жыл бұрын
I love the way it came out! I'm going to build a live edge walnut dining table, as soon as I can afford the slabs xD
@zackerynicholson954 7 жыл бұрын
Beautiful job! Cant wait to start working on my slabs I've had drying for the past two years. only comment is on the final step...I know you'll "never see them" but I hope you painted those bolts to match those nice brackets you got. Anyway, great work and helpful video.
@lloydpinsent1349 Жыл бұрын
That's a brilliant idea to use the CA glue to seal the hole from one side prior to filling the hole with epoxy. Thanks.
@telosfd 6 жыл бұрын
Thread wood inserts at (13:48) is the best way to have secure threads. Nice work on that wood.
@ilyaivanov1745 7 жыл бұрын
It looks fantastic.!Very nice coffee table.!
@acopernic 6 жыл бұрын
Just discovered your channel thanks to bill. Superb
@dtom1145 7 жыл бұрын
Nice video! We have plenty of sources for live edge here in upstate New York. I do lots of live edge furniture from maple, cherry, black walnut and apple wood. The figure on these slabs can be spectacular, especially apple wood. Some suggestions: - Don't be afraid of slabs with cracks, use Dutchmen of a contrasting wood to control. - Tung oil or Watco Natural Danish Oil before urethane will make the figure of just about any wood pop! - Be careful when working the live edge as there can be some great insect tracks, worm holes and coloring that you want to retain. - I have successfully dripped candle wax into voids on the live edge to keep the epoxy from running through. Then chip it out of use a heat gun to soften. - Adding a contrasting dye to the epoxy will add a new dimension to the wood. - A blow dryer can be used to draw up bubbles in the epoxy to the top where they can be sanded away later. - Spend time designing the base. Too many live edge pieces just sit on spindly wire legs or turnings. The base design should compliment the live edge slab and figure. I've designed art deco bases, modern bases with angled stretchers, craftsman style... to compliment the slab.
@austint19 7 жыл бұрын
Love the live edge sandblasting. Subscribed!!
@Whamola 7 жыл бұрын
Got to love that weird industrial area that's sort of Denver and sort of Stapleton.
@alanmullock381 7 жыл бұрын
Beautiful table ,you were lucky not to need too much prep on the Slab!
@pheonixmann1114 6 жыл бұрын
There's a giant oak tree that I've been keeping my eye on. It's about 5 foot wide and huge. When it needs to come down. Im Makin a lot of tables
@gee3883 5 жыл бұрын
Nice table and brilliant tips and tutorial thanks
@JTWoodworks 7 жыл бұрын
Very informative and a beautiful result!
@tooljunkie555 7 жыл бұрын
looks real nice marc! nothing fancy shmancy ,but not boring; the very little I use wipe on poly I also brush it on. for me it seems to work better that way..oh and nice beard too 🍻💥
@MakeSomething 7 жыл бұрын
That is beautiful! Great use of the WWThreadTaps!
@woodwhisperer 7 жыл бұрын
+Make Something thanks brother!
@noeld5292 3 жыл бұрын
This was very helpful 🙂 thank you sir The tape on the bit helps 👌
@wesleydavidson4678 7 жыл бұрын
prob my fav project you've ever done.
@forestlampcraft472 7 жыл бұрын
you inspired me to open your channel.
@BDM_PT 7 жыл бұрын
Hi there from Portugal, Nice Table :D Obrigado(Thanks)
@TheReal907 4 жыл бұрын
Word of advice from someone that sandblasts log homes as well as a lot of other wood surfaces. If you use a sand that is round, you wont get that harry look that comes with using sharp sand. It raises the grain without cutting up the harder fibers of the wood.
@connercondor 6 жыл бұрын
Great work as always, Mark! Just curious as to the sweep / size of the gouge you were using to clean some of the excess epoxy / bark, and what you'd say is the most versatile gouge size if someone was to purchase only one. Thank you!
@marcusshoenthal212 7 жыл бұрын
awesome table! love live edge projects
@theultimatemaker9153 7 жыл бұрын
Awesome build like always!!
@TheWoodBasher 5 жыл бұрын
I love this! Came out really nice
@DiscoDenny 7 жыл бұрын
Didn't want a live edge table until I watched this. Guess I need to order some WW Thread Taps now.
@you569 7 жыл бұрын
Hi how long do you wait for poly to dry between coats. Thanx
@cewenson 7 жыл бұрын
hi Marc , awesome video once again! I was wondering what you would recommend to prevent a piece like this from cracking or splitting. I have 4 live edge pieces and two of them have cracked, huge, in the winter when the heat is on. Any ideas? Thanks
@ddbronco1873 7 жыл бұрын
Gotta love Denver! ❤️
@johnabbey360 7 жыл бұрын
I love the live edge look. I've seen bark inclusion on some live edge furniture. Any suggestions on how to do with bark left intact?
@SpencleyDesignCo 4 жыл бұрын
yeeeehaw! THanks for the video Marc!
@tonyozimek2116 7 жыл бұрын
Another Great Video! You are the master!!
@dianaruccio5163 7 жыл бұрын
I know you have a turboplane I use mine to remove the epoxy! excellent results.
@MrHandwerk 7 жыл бұрын
Great tutorial :-)
@MrCMHathcock 6 жыл бұрын
So a bit coarser grit on the black beauty will cut through anything. We use it where I work to cut missiles into pieces for testing. We have to surround it with ceramic blocks so it doesn't damage the structure.
@WorthdoingwellCanada 7 жыл бұрын
Oh man Marc wipe on poly on such a nice slab!? I need to introduce you to Osmo products. I'll use TopOil or PolyxOil for my live edge tables - especially walnut. Let me know if you want to try or if you want me demo the products for you and I would be happy to get it to you or skype/facetime you for the run-through. (that goes for anyone reading this) They're a German brand I carry now and the quick explanation is that they are 30 years in the making and what I would call a hybrid finish. It's a high solid oil and wax finish with solvent. Your poly there will sit on the surface or a traditional tung oil will soak into the wood. With Osmo the oils soak in to give it that permanent wet look while the waxes provide durability on the surface. It is also really easy to retouch even on site at a clients because it takes a slight sanding and then you can re-apply. Sorry for the rant but you really need to try this.
@treywilliams1713 4 жыл бұрын
is it applied like an oil/wax, or more towards a poly?
@frankingram3382 7 жыл бұрын
Nice looking table. Where you scraped off the bark could you have saved the bark with CA or Poly? God Bless my friend.
@kirkrogers6968 7 жыл бұрын
Great job! I am going to do one and this answers a lot of questions. I like the edges being rounded for safety reason. What's your thinking on it?
@BruceAUlrich 7 жыл бұрын
Looks fantastic!
@boblevey 3 жыл бұрын
Nice build and good ideas Thanks
@chaotichousewife5929 4 жыл бұрын
Beautiful work !!!!
@KB-pw4lc 5 жыл бұрын
Rookie mistake: I started with a very rough cut 36 inch Dia. Red Oak cookie. Used a router to take off an inch on each side and coated it on both sides with the recommended sealant everyone uses. Stored it on slats on top of the fridge in the garage to dry. Found a 2 inch cracked after about a month. May have been some radiant heat from the back of the fridge. Just finished the 2nd and 3rd cookies. This time I also wrapped the outer surface perimeter with a high tension strap and storing on slats on the ground in the garage. Thoughts?
@bryaneaton8216 7 жыл бұрын
Nice. I'm going to have to try this.
@stephaniewelch4882 7 жыл бұрын
Welcome to Denver
@derekdodson9982 3 жыл бұрын
Beautiful table. Thanks.
@milepetricevic7218 3 жыл бұрын
Wow nice job looks great!! How would the finish look if you put some dewaxed shellac before the WB Polly ? I’m looking for the best finish to make the grain really pop what would you suggest I will most likely be doing walnut or olive. It would be nice to hear your thoughts. Thank you
@jawadsaadi 7 жыл бұрын
perfect timing, I just got a slab as a gift :-)
@WilliamLutesMaker 7 жыл бұрын
A Spags multi medium furniture build......I am one happy camper right now :-)
@chuckhager1 7 жыл бұрын
Use thin CA in your threaded holes to strengthen the threads. Great looking table.
@lloydsimmons1906 7 жыл бұрын
Should you put the CA into the hole or onto the bolt threads or both?
@chuckhager1 7 жыл бұрын
Lloyd Simmons just on the wood internal threads. Let the CA dry before inserting bolt.
@lloydsimmons1906 7 жыл бұрын
That makes complete sense. After you replied I thought about it and if you inserted the bolt into wet CA then it would act like thread locker.
@zzzkkkf 7 жыл бұрын
Wow wonderful work
@daveyJ213 7 жыл бұрын
Marc, I am nearly done with my work bench and I am starting to think about finishes and protection. The bench is most birch with sapele accents. What would be a good finish? For instance, what about simple tung oil just to bring out the grain? Would it be okay to simply leave the wood unprotected/unfinished? Would the wipe on poly be the best? Still learning. Thanks. Great job on the live edge table.
@UrbanPanic 7 жыл бұрын
Man, tapping right into the wood seemed a bit scary to me, but then I realized how much furniture uses threaded inserts which are... basically the same thing with one more level of complexity added. The inserts are probably a bit better for knock down style furniture you want to assemble and reassemble, but... eh. And if you do chew through the threads, it isn't a big deal to drill the hole a little larger and glue in a piece of dowel to start over. Repair would be covered by whatever you're attaching. Beautiful piece... it was a live edge slab of black walnut that convinced me to go from just watching a lot of woodworking videos to investing in the tools to actually start making sawdust myself. And... It's been about a year. Maybe time to put on a maintenance coat as I did go with a (mostly) oil finish.
@marquisbois990 7 жыл бұрын
Wish we had places like CS Woods in France.
@martinwelsford1353 3 жыл бұрын
Im just starting out with slabs of apple and elderberry from the garden so I found your video very helpful. Thanks. When you say "poly" do your mean polyurethene varnish and is that water resistant please ? Thanks again
@deej19142 7 жыл бұрын
Ok.....I had no idea you could even tap threads in wood...MIND BLOWN!!!
@deej19142 7 жыл бұрын
Yeah I watched that video as well. Crazy! Now all I need is a wood shop, money and skills. LOL
@toysoldier46552 7 жыл бұрын
lol, everything takes practice, don't be frustrated when you try to build with wood. start simple, even building a shelf can help you hone these skills.
Tree to Shop
Рет қаралды 197 М.
wakakusa woodworking /ワカクサモッコウ
Рет қаралды 314 М.
Arslan khan_007
Рет қаралды 20 МЛН
Sok Kimleng
Рет қаралды 14 МЛН