Make A Super Accurate Crosscut Sled

Рет қаралды 9,120

2 жыл бұрын

The crosscut sled is the most important jig for your table saw for making consistently square cuts. Watch as we follow the 5 cut method to make a sled that is dead on square. This is not a hard jig to make...you can do it! It's EASY!

Пікірлер: 30

@annshr9917 Жыл бұрын

I love your clear instruction on how to make the crosscut sled. You really are a good teacher, Wes!

@WoodworkingWithWes Жыл бұрын

Thank you very much for your comment, glad you enjoyed it! Wes

@johnvatistas6569 3 ай бұрын

Excellent video. I have a suggestion for you to teach novices who don't know jack squat about woodworking jigs (like me). Here are my questions if you don't mind answering: 1. What is the sloping angle pattern for the back sled fence? 2. Why didn't you created and install the exact same front fence you did for the back fence? Why the two pieces of wood with one lower rather than the two three quarter boards you did for the front fence? Runners and spacer: How thick are the spacers vs. how thick is the white oak runners. I know it will depend on how deep the groves are, but wanting to see on your what you did exactly? Thank you!

@emilevoyer123 5 ай бұрын

THANKS FOR THE VIDEO

@lololine Жыл бұрын

This is a great video!!!

@WoodworkingWithWes Жыл бұрын

Thank you!!

@AllenDrewesBuilds 2 жыл бұрын

Best video on how to do this and I watched plenty. Great job, thank you.

@WoodworkingWithWes Жыл бұрын

Glad it helped...thank you for watching. Wes

@kennethlemke9826 Жыл бұрын

Nice easy simple sled…thx

@mountainviewturning5319 2 жыл бұрын

Very nice 👍

@WoodworkingWithWes Жыл бұрын

Thank you 👍

@brandonwoodworkersclub4097 2 жыл бұрын

Nicely done Wes. Subscribed

@WoodworkingWithWes Жыл бұрын

Thanks for the sub! Appreciate your visit to the channel. Wes

@wequetoys3088 11 ай бұрын

Wes, I really enjoy your videos. Live in Harbor Springs, retired and am building out my shop. Like your low key presentation.

@WoodworkingWithWes 10 ай бұрын

Well thank you very much....welcome to the community, Wes

@LVCID777 6 ай бұрын

Your videos are the best I’ve found and for a hack like me they been invaluable 😂

@redbarron76 9 ай бұрын

like your videos well explained looking forward to seeing more keep up the good work

@WoodworkingWithWes 9 ай бұрын

Thanks, will do! I appreciate your visiting the channel. Wes

@pointerg6181 Жыл бұрын

This is a good technique. I saw William Ng do this as well.

@biglav6048 2 жыл бұрын

My last two crosscut sleds (and my 45 miter bevel sled) have been set up with a nice square. Never had an issued cutting perfect 90's! Personal belief is the 5 Cut Method is great if you want to be in thou' realm, but we need square dead cuts not finely tuned rocket motors! Great video Wes!

@MrAkwaholic Жыл бұрын

I prefer the 3 cut method.

@kevinh7729 Жыл бұрын

What type of plywood would you recommend for your sled?

@WoodworkingWithWes Жыл бұрын

Any good quality plywood would work...mine is maple. Thank for watching, Wes

@jgraham007 4 ай бұрын

So your back fence just happened to be perfectly square, or did I miss something?

@stevegronsky8904 2 жыл бұрын

Why nails in the fence, rather than screws?

@WoodworkingWithWes Жыл бұрын

It's just easier...thanks for watching. Wes

@davidsanders5861 2 жыл бұрын

Sorry to point it out, but I think your 5 cut method was incorrect. Your last 2 cuts were made without turning the piece, so the piece you cut off is guaranteed to have parallel sides. You should have given it one more turn before the final cut.

@jgraham007 4 ай бұрын

I had to watch it again, but you're right. He should have turned it one more time for the 5th cut. Good catch.