Wooting 60HE+ Module Installation Guide

Рет қаралды 14,014

Күн бұрын

Just got your 60HE+ Module, or wondering how the installation is performed? Following along this tutorial on how to install your 60HE+ Module into the Alumaze60!
💼 Case Compatibility list wooting-technologies.notion.s...
🛒 Wooting 60HE+ Module wooting.io/wooting-60he-module/
🛒 Wooting Alumaze60 wooting.io/product/alumaze60
✨ Follow our socials! ✨
Discord wooting.io/discord
Twitter / wootingkb
Instagram / wootingkb
Customer Support: social@wooting.io
Marketing/Press requests: marketing@wooting.io
➤ Check out our products
80HE wooting.io/wooting-80he
60HE wooting.io/wooting-60he
Two HE wooting.io/wooting-two-he
UwU wooting.io/uwu
Wrist rest wooting.io/wrist_rest
Keycaps wooting.io/our-products?categ...
Accessories wooting.io/our-products?categ...
0:00 Intro
0:49 Tools required
0:56 1. Decide the Sandwich Pad
1:20 2. Remove 8 silver screws from the PCB
1:36 3. Pulling the PCB
1:48 4. Put the sandwich pad on
2:00 5. Put the PCB back
2:18 Getting started with the Alumaze60
2:36 6. Install the stand-off
3:05 7. Apply the silicone rings
3:20 8. Insert the bottom foam
3:39 9. Inserting the module in the case
3:52 10. Screw in the 5 white screws
4:02 11. Insert the switches
4:48 12. Putting on the keycaps
5:08 Applying the strap in the Alumaze60
6:53 Outro

Пікірлер: 54

@technopath4119 3 ай бұрын

My wooting comes today perfect timing

@UnolinguhLuno 3 ай бұрын

Same bro

@thwizo 3 ай бұрын

@@UnolinguhLunowe are so back dude wooting #1

@explicitcs2 2 ай бұрын

just ordered mine. :)

@danemyburgh 3 ай бұрын

Received my Tofu60 Redux today. Just waiting on my module, switches and kepcaps now 😄

@Transformer5348 3 ай бұрын

Love the vid wooting you explain everything so well. Thanks for what you have done for the gaming community I hope to get my wooting soon!

@Wooting 3 ай бұрын

Glad it helped! Was a bit late to the party of making this video, but still happy to help some new buyers! ^^ All our next upcoming products should have video's explaining things right from the start when customers are receiving it.

@Transformer5348 2 ай бұрын

@@Wooting Glad to hear it! I cant wait to get my 60he I've been saving up and I can finally get one I hope to order it very very soon but thanks again for explaining things so clearly in every video

@xyzxyzxyzxyz 3 ай бұрын

My redux arrived today, how perfect!

@mikerzisu9508 2 ай бұрын

Mine is on its ways. Did you use the middle case standoff when screwing down the pcb? And did you have any issues with hand screwing the spacebar standoff into the chassis?

@fabiolindner 23 күн бұрын

@@mikerzisu9508 Are you supposed to use the middle standoff with the tofu case?

@mikerzisu9508 23 күн бұрын

@@fabiolindner no, you aren't

@ezcuna 3 ай бұрын

With the 80HE coming, will we also get an updated guide on how to switch lekker switches but with the 80HE keyboard? Appreciate the guides :).

@iikarko 2 ай бұрын

It would be great if you make a white pre build version

@SokoladoFabrikas 3 ай бұрын

guud baiii

@cornhead6873 Ай бұрын

Will there be modules to buy in the future for the two HE? I prefer full size keyboards but I want to customise it

@Foxtrox6400 2 ай бұрын

Ive got a question do other 60% pc plates work on the 60he+ coz i want to install screw in stabs?

@arefinlabib4630 3 ай бұрын

Got the NEW White Alumaze60 Case! Was really excited for it BUT really disappointed with the finish! Feels really rough, grainy, and unfinished. Would love a E-Coating White or an Anodized White Please.

@deflatedpancake6840 3 ай бұрын

Woot woot

@cryptonit.mill.3462 Ай бұрын

Are the poron pad included in the module?

@yxno1 3 ай бұрын

I was wondering will there also be an HE+ Module option for the TWO HE?

@Wooting 3 ай бұрын

There won't be a module option for the Two HE. As the Two HE is being sold for some years now we are looking into making updated version of this in the future.

@brgadoinks Ай бұрын

can I buy the 60he module with all the parts(switch, keycaps, and case), then have it delivered pre-installed?

@Adrixnn_ 3 ай бұрын

Im get a Wooting 60he

@Wooting 3 ай бұрын

Niceee! One of us! 🤲

@isxndy 2 ай бұрын

Is it still as fast as the normal wooting when using a different switches?

@GermanDudeEU 2 ай бұрын

I think only the original switches and magnetic switches work with the wooting pcb

@boodeekilla1309 Ай бұрын

are the stabilizers pre lubed on the 60HE+ module version?

@Wooting Ай бұрын

Yes they come pre-lubed! :)

@boodeekilla1309 Ай бұрын

@@Wooting sorry if dumb question lol i’m new to modding but what foam would you recommend if i’m going with the 60HE module and the tofu 60 redux case? because most mods i see online use the factory foam to keep pcb from touching the case and is from the original 60HE keyboard

@johnnyll91 3 ай бұрын

Any plan of a wireless keyboard?

@okbommer8489 3 ай бұрын

i think they arent gona focus so much on wireless as they been grinding the lowest delay but a wireless wooting would be godly

@johnnyll91 3 ай бұрын

@@okbommer8489 unfortunate

@okbommer8489 3 ай бұрын

and another thing is low delay on wireless is gona cost them alot more to implement and is most likely to cause longer waiting times for other products

@Wooting 3 ай бұрын

Mostly I think we haven't invested much in wireless for several reasons: - With batteries come more regulations and rules and most likely more costs for shipping. - The keyboard mostly is stationary and majority of the users don't mind having a wired board. - There are more points of failure. - Battery can degrade over time. - Performance is best on a wired connection. But I can totally get having a wireless board, like swapping over devices more easily and just having a better aesthetic overall. It isn't completely out of the picture for the future, but it has never been a priority. (This is my view on the matter, from the rest of the team it can be somewhat different reasons but I think this covers most of it.)

@okbommer8489 3 ай бұрын

@@Wooting i knew it

@Calslock 3 ай бұрын

5:09 Hmm... I think Fn and Ctrl keycaps are in the wrong places with some ISO layouts

@Wooting 3 ай бұрын

These are basically the renders we still had for me to use. Didn't know these were swapped, lol. But you can always swap them around of course and remap in the software if you prefer things differently. ^^

@ilsalmeron 3 ай бұрын

2:58 sooooo what would happen if someone did install the middle standoff and did also screw the module into it 👀

@elhuerino1607 3 ай бұрын

The middle screw is only for HE plus. Regular one doesnt have that hole in the keyboard. So you did it right. They just made a mistake and reused the old video for that part. I had that same question too. My problem now is the accent piece silicone ring. He said to throw it away. That has me confused.

@Uferizer 3 ай бұрын

I also used a second standoff in the middle and screwed the module into my case there (Tofu Redux). I would think there’s nothing wrong with doing that, but probably the plate is more stiff that way, hence impacting typing feel and sound? Would love to know from Wooting why it’s advised not to, though…

@Wooting 2 ай бұрын

There is nothing wrong with installing it. There is a cutout for it of course. But it is mostly for the feel and sound, yes.

@GarouTFD 3 ай бұрын

wonder if you had to pay something for the fairy tale logo

@Wooting 3 ай бұрын

What fairy tale logo you mean?

@GarouTFD 3 ай бұрын

@@Wooting fbi.cults3d.com/uploaders/13111952/illustration-file/abf1c4e7-7d87-4637-8570-a7fb245adb50/Fairy_tail_logo.jpg this one is from an anime

@GarouTFD 3 ай бұрын

@@Wooting Just wondered since bandai namco has released games from that anime, but i dont know how free these Logos are usable for commercial use when somone else has the rights

@GarouTFD 2 ай бұрын

encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcRSg--_bwaCsQGgxWIrRSd3EEfyyy3vjQnnEQ&usqp=CAU

@GarouTFD 2 ай бұрын

@@Wooting its right above the 03/11 plant one. Right beside the spacebar

@cristianramos2867 3 ай бұрын

I wish there was a way of buying the sandwich pad and screw in stabilizers without buying the 60HE+ the customization never ends man now the lekkers V2🥲

@Wooting 3 ай бұрын

You can purchase third party stabilizers seperately somewhere. But it is a fair point that we should sell our own perhaps separately as well. Not sure if this is do-able logistic/cost wise but I will share the feedback!