so its a drill powered air pump and melts

I love this stuff because its a window into the past. Imagine you had this crazy theory that you could make a steam engine run off explosions! This is what i imagine it was like, constantly tweaking and modifying to simplify and increase efficiency.

Use a little bit of aluminium foil on the cilinder head to slow down the melting

remember, this is a 2 stroke. The exhaust needs some backpressure, not an open hole, it won't run well at all :)

Seems like you need a better seal on the piston

Me: makes a simple house out of legos with no instructions This guy: coward.

That's really cool! Never expected such a build could be made, great job!

There are many "easy to fix" problems here. First your engine doesn't make enough compression, piston should be 2mm from the cylinderhead at tdc. Second thing is that your air intake opening point should be lowered to at least the middle of the stroke (instead of all the way at the top). Now al your pressure your making with the piston is getting wasted, because the air intake port is so high and doesn't close when the piston is in it's compression stroke. Third thing is to make sure your exhaust pressure goes away as soon as possible. Exhaust should be at the middle of the stroke (or even higher). Don't go to high with the exhaust port else you won't be able to make compression. Don't worry about not having back pressure, that's a story for another day and not important for now. Fourth and last thing is that your ignition is way to late. It should be way and way earlier. Since the engine is made out of legos making compression is hard. So don't try to compress the air and fuel like your doing now but make the ignition timing earlier. Now you'll be already compressing an explosion of gasses into the combustion chamber. Therefore there will be high pressure and de piston will have a good powe stroke. Don't go to crazy though, it's still legos. I hope this can help you, I'm not a mechanic but a 2 stroke enthusiast and I've worked quite a lot on them.

Wait a second so you made an engine and forgot to even make an exhaust?!

Intake port is too high not enough closed room for compression, the intake port needs to be lower then the exhaust port. You can find on google or youtube how a 2 stroke cylinder looks like but yours needs to be without transfer ports becouse you dont have a closed block.

YES IT'S FINALLY HERE

Made a combustion engine with plastic lego... Lol, it's funny

That's just amazing. I make a lot of Lego engines similar to that, but I've never seen one that ACTUALLY fires. You should try making a 4-stroke engine, that'd be cool.

"After an unsuccessful run, I realized that I forgot to make the exhaust ports." Yep, that'll do it

Ah well its finally time :D

Give version 4 some intakeports a little above the exhaustports on the oposite side. And force the air-fuelmmix into the cylinder. You don't have much compression now.

I was waiting for this for ages, and it's finally out! I can't wait for the new and improved version! Also, try building a larger box around the cylinder, where water can flow through, it might cool off the legos enaugh not to melt, and make the crank-case closed, so you can put oil as lubricant in there. The oil might cool it from the inside as well. Thanks for continuing the project!👍

LOVE the work you're doing on this channel. Can't wait to see more

You're a man of focus, comitment and sheare fricking will

Waitet a Long time for this! And I like it!🙂👍

Love you guys for actually making a fuel burning engine! But you melted Lego...😞😂 Will there be a version 4???

Good job and keep doing this

Hell yeah it spits 🔥

This is so beautiful

Ok, Great Idea. But If I may make some kind suggestions. 1 try building a hit and miss motor. They run at slower revolutions. 2 I believe your bug zapper power supply did not provide the necessary voltage that particular spark plug utilizes. All modern spark plugs utilize 12 volts. You may want to consider trying a glow plug or boosting your voltage to 12 volts and the necessary amperage. Or look into a coil spark plug system found in the early engines. A modern designed system can be found in lawn mowers and two stroke weed wackers. 3 try utilizing Pure alcohol for fuel. Now I doubt you can get ahold of alcohol used in rocketry which is the ideal candidate since it burns longer and cooler. But you could potentially use high-proof liquor alcohol which is known as ethyl alcohol such as vodka and moonshine and can be found everywhere. I hope that you read my suggestions. I would love to see this project come to a successful conclusion it's a wonderful idea. 😎

Good effort lad this was ace

Holy shit bro i know this was a while ago but this is so sick!, the flames coming out of those three holes is nice 👌

now, this is epic

It's awesome! Don't give up keep trying!!

6:53 kinda sounds like my parents when they mysteriously are clapping at night

Absolute madlad

I gotta say I LOVE your spark plug triggering mechanism. It's simple and elegant, simply triggered by the piston reaching maximum compression, it's wonderful. It's quite unfortunate that it never was able to power it self. I have a feeling that it might not be causing enough boom. Regular petrol would work better then the normal 2stroke mix with your design since you are not lubing any parts. Also lengthening the crank shaft and adding a second piston on an opposite timing would help immensely. It would cut the amount of energy you need per each explosion in half.

Amazing, 2 of my favorite things in one, love the channel

Great job!!!

Never in my life would I ever think I'd see a Lego in line one that is straight piped

Man that sounds like bodies clapping together doing the sideways tango.

Yeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeees it’s finally here

You basically made an engine out of Legos!? I love it!😍

This is what I have subscribed for!

A mechanism to alter timing will help! A reluctor wheel from distributor, coil and module, like everything in a Honda director can be simply wired for trigger timing. Just cut other high points and have that one trigger point. Or flat metal disk with high point, like a .010 air gap. Variable reluctor sensor will close the circuit by grounding out coil through module. The vr sensor can just be grounded, and other rising wire will go to triggering side of module, which will get converted to ground trigger through module to ignite coil.

Amazing! Now you can fit it on a LEGO Honda or a Lawnmower

Amazing, now a full car

This is the kind of stuff I wish I could have done with my legos as a kid, but I was unaware at the time.

I love seeing all these lego channels popping up. Maybe lego is getting a new interest

Running the NGK plug in that bad boi eh? Nicely done ;)

4:17 When you forget to turn the fuel pump on Your intake ports need to be set lower than your exhaust ports for scavenging You need to valve the intake.

He don't working because he have a very small compression,but don't worry, this project is very cool!

Madlad actually did it

If your switching to nitromethane for fuel, you might as well convert to a glow plug and glow igniter. That might work better than a spark plug. PS, you better put the 6 speed transmission on that thing.

Aint no wayyyyyy, THAT THING SPITS FLAMES?!?!?

I just built a 4 stroke lenoir cycle combustion engine from an old 110ccm air compressor. Ive learnt a few things in wanna share: 1) compression is everything. Try to seal the piston by sticking pieces of tape to its sides. You could also make a piston from jb weld (check out makerj101s video on that) 2) use a flap/reed valve. You can easily make one from thin spring steel (feeler gauges are made from spring steel shhets in different thicknesses so you can choose from different strengths and they’re like 10 bucks) 3) the carburetor needs to be precisely tunable. You should shorten your intake hose and add a second ball valve to control the mix rate (air to fuel vapor)

a pull start would be so cool

Don’t give up I want to see you get that thing the run

Yes he’s back

Thats really cool. Of course i didn't had the experience you had with the engine, you know better than me but but i think all the engine needs to run on its own is a carburetor for 2 stroke engines and more compression. The engine would still burn due to the legos but at least it would run on its own for some seconds Edit:i just realised that a carburetor can't be used in this engine because as you said in the video, it dosen't use crankshaft power to deliver fuel air mix in the cylinder.

Keep going you can do it!

YES. FINALLY 🤟

This guy actually bought a real good japanese NGK to put in a tiny lego engine. 👏👏👏

"What engine ya got in that?" -"lego single cylinder!"

tips: put a smaller flywheel, put an air injector so it works, add oil (if you dont have use vegetable oil), when the piston goes up shorten the gap between the piston head and the upper thingy where the spark plug goes in. following those tips it might work idk i dont have the pieces needed to do that

I clicked on this video and got an ad for bricks. That was the first time I got an add for bricks

even though it didn't actually work it was pretty cool

When your bored in quarantine

Very impressive

im doing this one day, lmao u have talent bro

Brillant! But forgetting the exhaust port is quite essential 😃😃😃

New to the channel this popped up on my home page at the top!

The weird but amazing things KZfaq recommends me is an art form

Make a rudimentary carb so you can adjust your air fuel mix and get vaporised fuel rather than just liquid. That might give it a bit more of a kick. Also, a one way valve on the fuel inlet would help with building a little bit of compression, otherwise when it comes back up you’re probably pushing fuel back down the line, assuming it holds any compression at all. Cool idea though though, would love to see it run on its own!

Hey, Remember in a 2 stroke the exhaust Port needs to be a little bit higher than the intake Port, and they need to be on the opposite side of eachother in order to make an air flow through the cilinder

The literal definition of turning your pistons to liquid XD

Very smart

you need a second piston, so that instead of relying on the drill, both pistons rely on eachothers combustion.

yeeah, it is still not perfect, but it is definetly the best one on youtube. you got the best results out of all people that tried it! awesome, dont give up!

Very nice job, Keep it up and improve ;)

I think the piston needs some form of seal within the cylinder to maintain compression, like oiling rings and such on a normal piston. I think youre only achieving single cylinder pops when the pressure plus afr is correct on that specific compression stroke. There is something to be said about a circular piston as well. A rectangular piston will not experience pressure forces evenly across it and thus im guessing would transfer to the rod weird, as well as weird bore and stroke issues leading to odd flywheel momentum. For the engine to sustain itself that first pop has to be strong enough to throw the flywheel hard, getting the whole system to rotate quickly enough to build high pressure for the next combustion stroke. I suggest going bigger with the whole design. Scale the entire thing up to make everything more structurally sound and rigid, and get enough air and fuel in that cylinder to go bang even with garbage compression. Also, 2 stoke engines are witchcraft and run on hopes and dreams.

I might know a couple of ways how to make it run by itself you could try and make a square piston ring to help compression and adding 1 or more cylinders would help

7:45 I think whats happening is i think the fuel and air is not being mixed well but your getting the right amounts for it, so maybe you can try to find a way to mix the fuel and air very well and that might make it fire up, THIS IS SO EXCITING!!

everybody gangsta till the lego engine shoots flames

Metal Lego bricks would be perfect here

God, this guy is _so_ f**king smart!

A real engine of any kind has an intake and exhaust manifold, the exhaust manifold creates a vacuum which when the exhaust valves open, pull the piston up when it is at the bottom of the combustion chamber. The intake manifold is specifically made to flow as much air that is needed by the engine once the intake valves open but that’s not as important for your 2-stroke engine. What you need is a vacuum to pull the cylinder up on the exhaust stroke. Good luck, I hope that helps!

FINALLY

Imagine this guy making inline 4 or even V6/V8 lego engine with some aluminium in manfold and then creating a lego openwheels cart to race lol

Do direct Injection with syringe near spark plugs, you'll have to find a way to time fuel delivery too like you did the spark unless u wanna rip it wide open lol. regular pump gas 87 is the easiest to ignite btw. Reinforce combustion chamber and blam. I really like these videos keep up the good work.

The exhaust has to have a little back pressure or it won’t run very well or at all. Still, very cool! Keep it up!

Imagine this being the future engine

Ok we have engine now we need some nice exterior wheels and vouola! Lego cars incoming

Usually the 2 strokes have the exhaust port higher than the other ports, like 180 degrees f9r the exhaust and 120 degrees for the intake, also the spark plug should spark before the top dead center, like 18/20 degrees, more degrees before top dead center means a better working engine at low rpm but higher temperature at higher rpm

cant wait for the V8's dyno test :D

Have you tried spark advance? Did you need more exhaust ports? Did you need to add some something on top of the piston for a flat surface? Did you need sone kind of coating to reduce cylinder walls temperature?

OH MY GOD

The next video: building a fully lego combustion engine car!

Maybe form a gasket around the piston like a piston ring, so blowby is reduced and compression can be kept in. This engine would run with just a bit of compression built in.

Great concept, as a mechanic i would say you aremt getting nearly enough compression the type of fuel you are running, the ignition appears to fire inconsistantly and check the placement of your intake and exhaust ports

Cool idea dude, but what you are missing is compression. You will never get that thing running like that because of the immense amount of blow by. For a decent combustion cycle, you have to have a near perfect or at least decent seal from the piston to the cylinder walls. Without that, you wont get the proper combustion and any combustion that does happen will seep past the piston and out of the engine. hope this helps

Now it's time for a cooling system.

that's a proper good british accent you got there

To make it go on its own build more and connect them together that way it relays on its self to keep going also if u have an acelerater switch u can use that to

Mate i know im a lil late but i would love to see you building a turbo for that, im sure you can do it you seem pretty smart