In this video, we will analyze how to work with Fuse bits on the ATtiny10 microcontroller. The main purpose of changing the fuses on the ATtiny10 microcontroller is to activate the RSTDISBL fuse, which disables Reset on the 6th leg of the microcontroller (this is port PB3) and instead of three I / O ports, we get 4 full-fledged I / O ports that can work with digital and analog signals.
But when you turn off Reset, we lose the ability to flash the microcontroller. To restore the ability to reprogram the ATtiny10, you need to supply 12 V to port PB3. I will tell you more about how to restore the fuses of the ATtiny10 microcontroller in this video.
Utility to change fuses from video - drive.google.com/file/d/117L1...
Related videos:
- "Working with digital signal on ATtiny10. LED control. Button connection" - • Работа с цифровым сигн...
- "ATtiny10 is the smallest AVR microcontroller. Overview, programming USBasp with a programmer" - • ATtiny10 - самый мален...
- "Updating the firmware of the USBasp programmer to work with ATtiny10 (and not only)" - • Обновление прошивки US...
- "What are fuses? How to work with fuse bits on AVR microcontrollers" - • Что такое фьюзы? Как р...
ATtiny10 (set of 5 pcs) - alii.pub/62nd5t
USBasp Programmer - alii.pub/62nd67
0:00 What does the change of fuses on ATtiny10 give
1:00 All fuses ATtiny10
2:08 How does PB3 port work if Reset is not disabled
3:24 Utility for changing fuses
5:11 Working with analog signal on port PB3
6:15 How to restore fuses on ATtiny10